Molykote(R) Thread Pastes (Asia Products)

dowcorning.co.kr

Molykote(R) Thread Pastes (Asia Products)

Pastes

Molykote pastes consist of a high concentration of solid

lubricants dispersed in oil for convenient application.

In cases where oils and greases are squeezed out of the

lubricating contact, solid lubricants form well adhering films,

which prevent damages under extreme loads and low speeds.

Major applications are initial assembly and running-in.

14


Thread Pastes Pastes

Product

HSC plus P 37

Description

Solid lubricant paste; contains no lead or nickel.

Extremely pure, solid lubricant paste for bolted joints. It

contains no lead, nickel, sulphur, chlorine or fluorine.

Applications

Features

Composition

Typical Properties

Color

Consistency, penetration, density, viscosity

Unworked penetration

Density at 20°C

Base oil viscosity at 40°C

Temperature

Service temperature

Drop point

Load-carrying capacity,

wear protection, service life

Four-ball tester

Weld load

Wear scar under 400N load

Wear scar under 800N load

SRV test, type Optimol ball/plane, load 300N

endurance test, friction coefficient

Step load test, max. load

Almen-Wieland Tester

OK load

Frictional force with OK load

Fretting corrosion – Deyber tester

Coefficient of friction

Pressfit test

Screw test in bolted connection

Screw test in bolted connection

Alloy Sopral P 40 aluminium

Alloy Sopral P 40 aluminium

Initial break-away torque of Alloy 1.7709,

M-12 at 540°C

Break-away torque after 21h at 300°C,

Alloy Sopral 60

Break-away torque after 21 hours at 1100°C

Break-away torque after 21 hours at 300°C

Resistance

Water Resistance at 40°C

Water Resistance at 90°C

Corrosion protection

SKF-Emcor method Degree of corrosion

Salt spray test (50 µm thickness)

Flow pressure at -40°C

Oil separation, 7 days, 40°C

Application method

Packages

mm/10

g/ml

mm 2 /s

°C

°C

N

mm

mm

µ

N

N

N

cycles

µ

µ thread

µ head

µ thread

µ head

Nm

Nm

Nm

Nm

h

mbar

%

• For metal/metal combinations that are subjected to high

temperatures and frictional contacts which, typically for

bolted joints, are free from lead or nickel

• Suitable for lubrication points with low speeds, subjected

to high temperatures and corrosive effects, and also

require a low and constant coefficient of friction. As a

contact lubricant for electrically conducting components

• Used successfully for stud bolts of gas and steam

turbines, stud bolts of turbochargers of diesel engines,

flanged connections in chemical and petrochemical

plants

• Can be used over a wide range of temperature

(-30ºC to +1100ºC)

• Enables non-destructive dismantling, even after long use

at high temperatures

• High load-carrying capacity

• Due to stated coefficient of friction, defined pre-stressing

forces for bolted joints can be achieved

• Good corrosion protection

• Good electrical conductivity

• Mineral oil

• Thickening agents

• Solid lubricants

• Metal powder (lead free)

Copper

250-280

1.4

-30 to +1100

None

4800

0.6

1.1

20000

1700

0.14

0.09

120

Clean, where possible, threads resp. contact surfaces.

Apply paste liberally in order to obtain good seal. Do not

mix paste with oil or grease.

Aerosol: 400ml

Tube: 100g

Tins: 250g, 1kg

Container: 5kg

• Suitable for screws, nuts and bolts that are subjected to

extremely high temperatures and which are made of

heat-resistant or extremely heat-resistant steels, eg

those made from nickel-based alloys

• Used successfully for the bolted joints of gas and steam

turbines and in power stations

• Highly pure (less than 500mg of sulphur, less than

200mg of chlorine and fluorine per kg of lubricant)

• Can be used at temperatures up to +1400°C

• Coefficient of friction in the range of oiled bolts

• Low scatter of pre-stressing force on tightening

• Avoidance of stress cracks and solder brittleness

• Enables non-destructive loosening of bolted joints even

after long use at high temperatures

• Solid lubricants in practically sulphur free, partly

synthetic oil

• Thickener

• Adhesion improver

Grey-Black

280-310

1.2

-40 to +1400

4400

1.7

0.15

0.09

126

Clean the thread with solvent, used bolts with wire brush.

Spread paste liberally up to the root of the thread in order

to obtain a good seal.

Aerosol : 400ml

Tin: 500g

Container: 25kg

Usable life and storage

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

15


Thread Pastes Pastes

Product

P 74 1000

Description

Applications

Solid lubricant paste used in the assembly and fitting of a

wide range of components such as metal threaded

connections.

• Suitable for a wide range of applications in the chemical,

petrochemical, paper and automotive industry, and in

engineering, wood and plastic processing

• Used on bolted connections, sliding contact bearings,

linear sliding guides, splined shafts, press-fit joints,

exhaust bolts, spark plug threads, flanges and flange

seals, door hinges, brake mechanisms and plate

springs

Solid lubricant paste for bolted metal joints; contains no

lead or nickel.

• Suitable for bolted joints that are subjected to high

temperatures up to 650ºC and to corrosive effects, and

which, after assembling and the initial operation, have to

be re-tightened or disconnected. In order to ensure

constant pre-stressing forces, uniform and steady

coefficients of friction of the lubricant are necessary

• Used successfully for cylinder head bolts, nozzle head

screws of plastic injection molding machines, bolted

joints in the chemical industry, and also for the tension

rings of centrifuges

Features

Composition

Typical Properties

Color

Consistency, penetration, density, viscosity

Unworked penetration

Density at 20°C

Base oil viscosity at 40°C

Temperature

Service temperature

Drop point

Load-carrying capacity,

wear protection, service life

Four-ball tester

Weld load

Wear scar under 400N load

Wear scar under 800N load

SRV test, type Optimol ball/plane, load 300N

endurance test, friction coefficient

Step load test, max. load

Almen-Wieland Tester

OK load

Frictional force with OK load

Fretting corrosion – Deyber tester

Coefficient of friction

Pressfit test

Screw test in bolted connection

Screw test in bolted connection

Alloy Sopral P 40 aluminium

Alloy Sopral P 40 aluminium

Initial break-away torque of Alloy 1.7709,

M-12 at 540°C

Break-away torque after 21h at 300°C,

Alloy Sopral 60

Break-away torque after 21 hours at 1100°C

Break-away torque after 21 hours at 300°C

Resistance

Water Resistance at 40°C

Water Resistance at 90°C

Corrosion protection

SKF-Emcor method Degree of corrosion

Salt spray test (50 µm thickness)

Flow pressure at -40°C

Oil separation, 7 days, 40°C

Application method

Packages

Usable life and storage

mm/10

g/ml

mm 2 /s

°C

°C

N

mm

mm

µ

N

N

N

cycles

µ

µ thread

µ head

µ thread

µ head

Nm

Nm

Nm

Nm

h

mbar

%

• Metal-free

• Good corrosion protection

• High load-carrying capacity

• Coefficient of friction is of the same order as for oiled

bolts

• Low scattering of pre-tensioning force

• Prevention of stress cracking and brittleness

• Wide service temperature range

• Solid lubricants

• Synthetic oil

• Thickener

• Adhesion promoter

Greyish black

280-310

1.21

65

-40 to +200 as a paste, up to + 1500 as a dry lubricant

None

4800

1.1

0.10

1200

0.14

0.117

0.078

0.13

0.094

115

12.5

0

0-1

120

approx. 400

2.8

Clean, where possible, threads resp. contact surfaces.

Apply paste liberally in order to obtain good seal. Do not

mix paste with oil or grease.

Aerosol: 400ml

Tins: 500g, 1kg

Container: 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

• Can be used over a wide range of temperature

(-30ºC to +650ºC)

• High load-carrying capacity

• Enables non-destructive dismantling, even after long use

at high temperatures

• Coefficient of friction unchanged in the area of oiled

bolts, even after several bolt re-tightening and loosening

processes

• Good corrosion protection

• Solid lubricants

• Mineral oil

• Thickener

• Powdered metal

Brown

280-310

1.26

-30 to +650

4800

0.08

20000

2600

0.13

0.08

135

1

Rub sufficient quantity of paste into the cleaned threads in

order to achieve a good seal. Excess need not be removed.

Do not mix with greases or oils.

Aerosol: 400ml

Tube: 100g

Tins: 250g, 1kg

Containers: 5kg, 25kg

Drum: 180kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

16


Assembly Pastes Pastes Product

D

G-n plus

Description

Light-colored, solid lubricant paste for assembly and

running-in of metallic components.

Solid lubricant paste for the assembly and running-in of

metal components.

Applications

Features

Composition

Typical Properties

Color

Consistency, penetration, density, viscosity

Unworked penetration

Density at 20°C

Base oil viscosity at 25°C

Temperature

Service temperature

Load-carrying capacity,

wear protection, service life

Four-ball tester

Weld load

Wear scar under 800N load

Almen-Wieland machine

OK load

Frictional force with OK load

Coefficient of friction

Press-Fit test

Screw test in bolted connection

Screw test in bolted connection

Resistance

Water resistance, static, evaluation

Corrosion protection

SKF-Emcor method Degree of corrosion

Fretting corrosion – Deyber tester

Oil separation

Oil separation, standard test

Application method

Packages

Usable life and storage

mm/10

g/ml

mm 2 /s

°C

N

mm

N

N

µ

µ thread

µ head

cycles

%

• Sliding surfaces and friction contacts exposed to heavy

loads, requiring "clean" lubrication, particularly at low

speeds, and as a running-in lubricant

• Used successfully, for example, on many friction

contacts of electrical and domestic appliances,

packaging and office machinery, precision instruments,

machinery in foodstuffs and beverages industry, as well

as in textile and plastics processing machinery

• Wherever thin-film lubrication is impossible, the white

multi-purpose grease paste Molykote ® DX Paste

is recommended. This can also be applied with a brush

or rag, and may even be applied with a grease gun

• High load-carrying capacity

• Prevents stick-slip and seizure

• Good corrosion protection

• Excellent protection against galling and fretting corrosion

• Cleanness

• Thickener

• Mineral oil

• Solid lubricants

Whitish

250-280

1.2

-25 to +250

2600

1.08

20000

0.10, no chatter

1-90

0

36x10 6

Apply thinly and evenly to clean surface using a brush,

lint-free cloth or chamois leather.

Do not mix with other greases or pastes.

Aerosol: 400ml

Tube: 50g

Tins: 250g, 1kg

Container: 5kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

• Press-fit production of all types of machine elements, as

a running-in lubricant for new machines and gear-boxes

• Permanent lubrication of machine elements that are

moved only rarely or slightly and also for drilling, sawing

and thread cutting

• Used successfully for lubricating threaded spindles,

splined shafts, toothed gears, worm and transmission

gears, screws, valves, pumps, machine-tool guides and

also for the tightening and fitting of roller bearings,

washers, wheels, flanges and bolts

• High pressure-absorption capacity

• Low coefficient of friction, (µ = 0.09, no stick-slip)

• Prevents frictional corrosion and scoring

• Protection from stick-slip

• Good anti-corrosion properties

• Reduces frictional corrosion

• Mineral oil

• Solid lubricants

• Thickener

Black

280-310

1.35

-25 to +450, with reduced air access +630

2800

0.75

>20000

2600

0.08, no chatter

0.12

0.06

2-90

Apply thinly and evenly to clean surface using a brush,

lint-free cloth or chamois leather. Burnishing improves

adhesion.

Do not mix with other greases or pastes.

Tubes: 50g, 100g

Tins: 250g, 500g, 1kg

Containers: 5kg, 25kg, 50kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

17


Assembly Pastes Pastes Product

G-Rapid plus

U-n

Description

Applications

Features

Composition

Typical Properties

Color

Consistency, penetration, density, viscosity

Unworked penetration

Density at 20°C

Base oil viscosity at 25°C

Temperature

Service temperature

Load-carrying capacity,

wear protection, service life

Four-ball tester

Weld load

Wear scar under 800N load

Almen-Wieland machine

OK load

Frictional force with OK load

Coefficient of friction

Press-Fit test

Screw test in bolted connection

Screw test in bolted connection

Resistance

Water resistance, static, evaluation

Corrosion protection

SKF-Emcor method Degree of corrosion

Fretting corrosion – Deyber tester

Oil separation

Oil separation, standard test

Application method

Packages

Usable life and storage

mm/10

g/ml

mm 2 /s

°C

N

mm

N

N

µ

µ thread

µ head

cycles

%

Solid lubricating paste with particularly low friction

coefficient for assembly and running-in of metallic

components.

• Suitable for the press-fit production of all types of

machine elements, as a running-in lubricant for new

machines and gears, as permanent lubrication of

machine elements which are submitted to slight or

intermittent movement only, as well as for drilling,

sawing and thread-cutting

• Used to lubricate threaded spindles, splined shafts,

tooth gearing, worm gearing, moving screws, fittings,

pumps, guides on machine tools, as well as for fitting ball

and roller bearings, pulleys, wheel flanges and bolts

• Low friction coefficient

• High pressure-absorption capacity

• Prevents seizure and scoring

• Suppresses stick-slip

• Reduces formation of fretting corrosion

• Provides emergency running performance

• Mineral oil

• Solid lubricants

Black

255-275

1.40

-35 to +450

5300

>20000

0.05, no chatter

0.10

0.06

1-90

Apply thinly and evenly to clean surface using a brush,

lint-free cloth or chamois leather. When sprayed on,

burnishing is not necessary.

Do not mix with other greases or pastes.

Aerosol: 400ml

Tube: 50g

Tins: 250g, 1kg

Containers: 5kg, 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

Solid lubricant paste with synthetic carrier oil.

• For assembling, running-in and permanent lubrication

of components that are subjected to high temperatures

• Suitable for the dry lubrication of bearings (low rotary

speeds), slideways and joints that are subjected to

temperatures exceeding 200°C. At higher temperatures

the carrier volatilizes leaving virtually no residue, and

the remaining dry, anti-friction film alone takes over the

only lubrication up to +450°C - even beyond this in a

protective gas atmosphere

• As the paste has a synthetic oil base, it is also suitable

for lubricating construction elements that consist of

materials that are not resistant to mineral oils

• Dry lubrication up to +450°C

• Reduced friction and wear

• Low coefficient of friction

• High load-carrying capacity

• Compatible with some types of natural rubber and

plastics (test for compatibility required before use)

• Polyalkylene glycol oil

• Lithium soap

• Solid lubricants

Black

250-280

1.7

-40 to +450, up to +630 with restricted air access

3800

0.8

18000

3160

0.09, no chatter

0.7

Apply thinly and evenly to clean surface using a brush,

lint-free cloth or chamois leather. Burnishing improves

adhesion.

Do not mix with other greases or pastes.

Tube: 50g

Tin: 1kg

Container: 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

18


M 77

Solid lubricant paste with silicone carrier oil.

• Suitable for lubrication points with low to moderate loads

and low speeds which are subjected to water and

extreme temperatures. At temperatures above 230°C,

the carrier volatilizes leaving virtually no residue, and the

remaining dry sliding film itself takes over the lubrication

up to +450°C

• Suitable for lubricating parts consisting of materials that

are not resistant to mineral oils

• This product is used successfully on metal/metal

combinations with frictional and contact surfaces, brake

anchor plates and the brake pistons of disc brakes

• Paste lubrication up to +230°C,

dry lubrication up to +450°C

• Good water resistance

• Good volatilization properties

• Compatible with many types of elastomers and plastics

• Polyphenylmethyl siloxane oil

• Lithium soap

• Molybdenum disulphide

Black - Grey

280-330

1.95

125

-45 to +230 (paste-like), up to +450 (dry)

2000

Clean the contact areas and apply with brush, spatula,

grease gun or automatic lubricating device. Can be used in

central lubricating systems.

Do not mix with other greases ot pastes.

Tin: 1kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

19


Grease Pastes Pastes

DX

Product

E

Description

Light-colored grease paste with solid lubricants for

assembly and long-term lubrication of metallic components.

Light-colored, solid lubricant paste.

Applications

Features

Composition

• Sliding surfaces and friction contacts exposed to heavy

loads, requiring "clean" lubrication, especially at low to

medium speeds

• Used successfully, for example, on many friction

contacts of electrical and domestic appliances,

packaging and office machinery, precision instruments,

machinery in foodstuffs and beverages industry, as well

as in textile and plastics processing machinery

• Particularly high load-carrying capacity

• Good water and water wash-out resistance

• Prevents stick-slip and seizure

• Good corrosion protection

• Excellent protection against galling

• Cleanness

• Mineral oil

• Lithium soap

• Solid lubricants

• Corrosion inhibitor

• For the long-term and permanent lubrication of

metal/plastic and plastic/plastic combinations

• Suitable for sliding bearings and sliding surfaces that

are subject to high compressive loads made of dry

metal/metal and plastic/plastic combinations, and also

combinations of metal and oil-resistant rubber. The

paste is particularly suitable for components made of

fiberglass-reinforced plastic

• Used successfully for automatically operated car aerials,

vehicle seat adjusters, switches, ski attachments and

furniture hinges. Also for sliding bearings, bushes and

toothed gears in domestic appliances

• Low coefficient of friction

• High load-carrying capacity

• Compatible with most plastics

• No drop point, hence no melting or leakage from the

lubrication point

• Effective long-term lubrication, since it is very resistant

to oxidation, and has little tendency to volatilize

• Good low-temperature properties

• Polyalphaolefine

• Organic thickener

• EP additive

• Solid lubricants

Typical Properties

Color

Consistency, penetration, density, viscosity

NLGI consistency class

Unworked penetration

Worked penetration

Density at 20°C

Base oil viscosity at 40°C

Temperature

Service temperature

Drop point

Low temperature torque test at

Initial break-away torque

Torque after 20 minutes running time

Kesternich method - flow pressure at -20°C

Kesternich method - flow pressure at -30°C

Deutsche Bahn AG test Stirrability at -35°C

Load-carrying capacity, wear protection,

service life

Four-ball tester

Weld load

Wear scar under 400N load

Wear scar under 800N load

Almen-Wieland machine

OK load

Frictional force with OK load

Coefficient of friction

Press-Fit test

Screw test in bolded connection

Screw test in bolded connection

Initial break-away torque (M12 with starting

torque Ma=80Nm and heat treatment at 300°C,

21h, bolt material: C 45, 8.8, mat.no. 1.0503)

Steel ball against plastic (POM)

SRV Optimol Oscillating endurance test

Resistance

Water resistance, static, evaluation

Oxidation resistance, pressure drop 100h, 99°C

Corrosion protection

SKF-Emcor method Degree of corrosion

Fretting corrosion - Deyber tester

Salt spray test

Oil separation, evaporation

Oil separation standard test

Application method

mm/10

mm/10

g/ml

mm 2 /S

°C

°C

°C

Nm

Nm

mbar

mbar

N

mm

mm

N

N

µ

µ thread

µ head

Nm

µ

µ

bar

h

%

White

285-315

1.1

110

-25 to +125

-20

124x10 -3

63x10 -3

200

4800

0.75

20000

1560

0.10, no chatter

2-90

0.8

2-3

>36x10 6

3.8

By brush or lint-free cloth or grease gun to clean

components. Can be used in centralized lubrication

systems. Do not mix with other greases or pastes.

Yellow

2

265-295

1.20

18

-50 to +160

>280

-40

200x10 -3

82x10 -3

4800

0.5

>20000

1200

0.04

0.05

1.4

By brush or lint-free cloth onto clean surfaces. Due to the

variations of plastics, compatibility tests should always be

carried out prior to the final use.

Do not mix with other greases or pastes.

Packages

Tube: 50g

Tins: 250g, 1kg

Containers: 5kg, 50kg

Tin: 1kg

Container: 20kg

20

Usable life and storage

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.


TP 42 CU-7439 plus P 40

Light-colored adhesive grease paste with solid lubricants

for metallic friction combinations.

• Sliding surfaces exposed to high pressure loadings and

subject to the influence of water of metal machining

emulsions

• Recommended and successfully used by leading

clamping-element manufacturers, especially for chucks

on metal processing machines

Copper paste for components subjected to high

temperatures, high pressures and corrosive influences.

• Well suited for all areas which need to be protected

against water, steam and corrosion, e.g. brake

mechanisms, flange seals, exhauster bolts

Metal-free adhesive lubrication paste which can be used

for all assembly and continuous lubricating jobs,

particularly those exposed to corrosive environments such

as splash water or humidity.

• Assembly and threaded connections, spline shafts,

mounting of bearings

• Continuous lubrication: for various parts in brake

systems, in brake rods, guide bolts. Axles of commercial

vehicles, cams and plain bearings

• Open Gears

• Marine applications

• High load-carrying capacity

• Particularly adhesive

• Particularly resistant to wash-out by water and metal

machining emulsions

• Prevents stick-slip

• Good corrosion protection

• Excellent protection against galling

• Mineral oil

• Synthetic oil

• Lithium soap

• Solid lubricants

• Adhesion improver

Light beige

• Wide service temperature range

• Good pressure resistance

• Very adhesive and resistant against water wash-out

• Good corrosion protection

• Low evaporation

• No drop point

• Powdered copper

• Partly synthetic oil

• Inhibitor

Copper colored

• Excellent adhesion

• Good corrosion protection

• Good water resistance

• Good antifretting

• Assembly and continuous lubrication

• Metal-free

• Low water pollution class

Dark green

265-300

1.19

-25 to +250

125

-20

224x10 -3

59x10 -3

740

320-370

1.0

1100

-30 to +650; as a paste up to +300

None

310-350

900

-40 to +230 as paste; -40 to +1200 as solid lubricant

None

960

4

3000

0.9

20000

1710

0.09

2500

1.0

>20000

0.07

0.17

0.10

110

3000

0.94

0.12

0.16

0.08

2-90

1-90

0.13

0-1

0

0

25 x10 6

500

1.5

By brush, cloth or grease gun.

Do not mix with other greases or pastes.

Tube: 100g

Cartridge: 500g

Tin: 1kg

Container: 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

Contact surfaces should be cleaned. Then apply paste with

a brush or cloth. Excess lubricant need not be removed.

Can be used in grease guns and centralized lubrication

systems. For disk brakes treat only the rear of the brake

block. Do not mix with other greases or pastes.

Aerosol: 400ml

Tube: 100g

Tins: 500g, 1kg

Containers: 5kg, 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

The sliding surfaces should be cleaned. The paste should

then be applied with a suitable brush, rag or grease gun.

It should not be mixed with greases or oils.

Aerosol: 400ml

Tin: 1kg

Containers: 5kg, 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production. Do not mix with other greases

or pastes.

21


Metal Forming Forming Paste Paste Product

HTP

Description

Solid lubricating paste for hot forming of metals.

Applications

Features

Composition

Typical Properties

Color

Penetration, density, viscosity

Unworked penetration

Density at 20°C

Temperature

Service temperature

Load-carrying capacity, wear protection,

service life

Four-ball tester

Weld load

Wear scar under 800N load

Almen-Wieland machine

OK load

Frictional force with OK load

Application method

Packages

Usable life and storage

mm/10

g/ml

°C

N

mm

N

N

• Suitable for the lubrication of tools for hot forming,

particularly on hot-flow presses and drop forging, also as

a parting agent and slip additive at high temperatures

• Used successfully for the hot bending of flat steel St 37

or St 70, the rolling of the ends of vehicle leaf-springs,

folding of sheet metal edges, hot rolling of cutters, and

drop forging of flywheels made from St 37, as well as for

the lubrication of separator plates on chipboard presses

• High temperature resistance (up to 1150°C) as a dry

lubricant

• Reduces friction and wear

• Reduces scoring

• Increases service life of tools

• Mineral oil

• Thickener

• Solid lubricant

White

250-280

1.5

-20 to +1150

2200

1.0

20000

2300

Clean tools, then apply paste thinly and evenly with a

brush, cloth or swab. Repeat from time to time as required.

Do not mix with other greases or pastes.

Container: 5kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

22


Greases

No matter what your industry – Automotive, Food and

Beverage, Power Generation, Pulp and Paper Manufacturing,

Chemical, or Petrochemical, we have the exact products and

services to support your business.

A lubricating grease is a semi-solid product of the dispersion of

a thickening agent in a liquid lubricant. The lubricating grease

operates by releasing the lubricating fluid from the thickening

agent and provides a way to supply a lubricant where the use of

oil is not practical.

Molykote high performance greases are designed and tailored

for use under extreme conditions like extreme pressure, harsh

chemical environment, low and high temperatures and all

velocities. Molykote greases are based on mineral oils or

synthetic fluids including silicone oils. A number of Molykote

greases contain special additives and/or solid lubricants like

Molybdenium disulfide to provide effective lubrication.

23


Mineral Oil Greases Oil Greases

Multilub

Product

BR 2 plus

Description

Applications

Features

Composition

High-performance grease for metal/metal combinations

involving slow to fast movements and medium to high

loadings.

• Lubrication contacts with light to medium loadings and low

to high speeds, even in the presence of moisture and spray

• Used on roller bearings, plain bearings, sliding guides,

roller guides, ball-and-socket joints, splined shafts and

threaded spindles

• Used for chassis lubrication on cranes, fork lift trucks

and lifting apparatus

• Good load-carrying capacity

• Suitable for long-term lubrication by virtue of low oil

evaporation

• Good water wash-out resistance

• Good corrosion protection (degree of corrosion 0-1 in

the SKF-Emcor test)

• Good oxidation resistance

• Reduction of wear and scoring

• Mineral oil

• Lithium soap

• EP additive

• Corrosion inhibitor

High performance grease with solid lubricants for

metal/metal combinations involving slow to fast

movements, particularly with medium to high loads.

• Used successfully on roller bearings, plain bearings,

sliding guides, roller guides, ball-and-socket joints,

splined shafts and threaded spindles

• High load-carrying capacity

• Suitable for long-term lubrication

• Good oxidation resistance

• Emergency running properties, i.e. in the case of mixed

friction providing of wear protection by solid lubricants

and EP additives

• Good protection against scaring (false Brinelling)

• Good water wash-out resistance

• Good corrosion protection

• Good protection against fretting corrosion

• Mineral oil

• Lithium soap

• Solid lubricants

• EP additive

• Corrosion inhibitor

24

Typical Properties

Color

Consistency, penetration, density, viscosity

NLGI consistency class

Unworked penetration

Worked penetration

Density at 20°C

Base oil viscosity at 40°C

Base oil viscosity at 100°C

Temperature

Service temperature

Drop point

Low temperature torque test

Initial break-away torque

Break-away torque

Torque after 20 minutes running time

Kesternich method - flow pressure at -20°C

Kesternich method - flow pressure at -40°C

Load-carrying capacity, wear protection,

service life

Four-ball tester

Weld load

Wear scar under 600N load

Wear scar under 800N load

FAG roller element bearing tester

FE 9, 1500/6000-110, F 50

FAG roller element bearing tester

FE 9, 4500/6000-130, F 50

Almen-Wieland machine

OK load

Frictional force with OK load

Fretting corrosion – Deyber tester

Coefficient of friction

Steel ball against plastic surface

(POM) Ø ball = 12.7mm, load = 6.3N,

v = 10mm/s, 24h

Resistance

Water resistance, static evaluation step

Oxidation resistance, pressure drop 100h, 99°C

Corrosion protection

SKF-Emcor method Degree of corrosion

Oil separation - evaporation

Standard test

Oil bleeding, 24h, 100°C

Oil evaporation, 24h, 100°C

Speed

DN value

Application method

Packages

Usable life and storage

mm/10

mm/10

g/ml

mm 2 /s

mm 2 /s

°C

°C

Nm

Nm

Nm

mbar

mbar

N

mm

mm

h

h

N

N

µ

bar

%

%

%

mm/min

Yellowish beige

2

265-295

0.87

114

-25 to +120

2200

0.8

1

450000

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Tube: 100g

Cartridge: 400g

Tin: 1kg

Containers: 5kg, 20kg, 50kg

Drum: 180kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

Black

2

265-295

0.89

114

-30 to +130, +150 for short periods

>=175

151x10 -3

59x10 -3

3600

0.8

121

15500

3150

0.1

0

3.8

450000

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Tube: 100g

Cartridge: 400g

Tin: 1kg

Container: 5kg, 25kg, 50kg

Drum: 180kg

Combi: 24 cartridges plus hand gun

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.


Longterm 2 plus

Longterm W 2

TTF 52

Lubricating grease for metal/metal combinations with slow

to medium-fast movements especially with high loads.

• Used successfully for bearings, spline profiles and

clutches in highly stressed motor vehicles, tractors,

cranes, earth-moving machines, conveyor belts and

forklift trucks

• Also where there is a risk of fretting corrosion, groove

formation (Brinell effect) or moisture

White lubricating grease for metal/metal combinations with

slow to fast movements and medium loads.

• Used successfully for bearings in machinery used in the

food and pharmaceutical industries, in textile and paper

making machines, domestic appliances and mechanical

precision instruments

High performance grease for metal/metal combinations

with slow to fast movements and moderate to high

stresses, especially at low temperatures.

• Used successfully for sliding and roller bearings,

gear systems in transport vehicles, in cold stores,

and also for equipment and instruments used in the

meteorological service. In addition it conforms to

BWB 9150-12-174-2260

• High load-carrying capacity

• Suitable for long-term lubrication

• In mixed friction it provides wear protection due to solid

lubricants and EP (extreme pressure) additives

• Good adhesion strength

• Good protection against corrosion

• Good load-carrying capacity

• Suitable for long-term lubrication since it has no

tendency to oxidize

• Wear protection through solid lubricants

• Good adhesion strength due to incorporated adhesion

improver

• Good corrosion protection (corrosion step 0-1 in the

SKF-Emcor test)

• Prevents the formation of frictional corrosion

• No drop point, hence no melting or leakage from the

lubrication point

• Grease remains soft and usable down to -52°C

• Possesses wear-reducing and anti-seize properties due

to incorporated solid lubricants

• Contains no lead or nickel

• Mineral oil

• Lithium soap

• Solid lubricants

• EP additive

• Corrosion inhibitor

• Adhesion improver

• Mineral oil

• Lithium soap

• Solid lubricants

• Adhesion improver

• Mineral oil

• Inorganic thickener

• Solid lubricants

• Corrosion inhibitor

• Adhesion improver

Black

White

Black

2

2

1

265-295

0.9

265

265-295

0.9

125

310-340

0.92

23

-25 to +110, +130 for short periods

>=175

-30 to +110, +130 for short periods

>=180

-52 to +100

None

420x10 -3

35x10 -3

125x10 -3

44x10 -3

153x10 -3

18x10 -3

3800

2400

2400

1.0

100

1.4

155

2.0

20000

3200

7500

1540

0.3

1-90

0-1

0-1

1.7

3.3

0.5

6.8

250000

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Cartridge: 400g

Tin: 1kg

Containers: 5kg, 25kg, 50kg

Drum: 180kg

Combi: 24 cartridges plus hand gun

450000

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Cartridge: 400g

Tin: 1kg

Containers: 5kg, 25kg, 50kg

Drum: 180kg

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Tube: 100g

Tin: 1kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

25


Mineral Oil Greases Oil Greases

Product

FB 180 X5-6020

Description

Applications

Features

High performance grease for metal/metal combinations

involving slow to medium-fast movements and light to

heavy loadings, particularly at high temperatures.

• Suitable for lubrication points with light to heavy loadings

and low to medium speeds, particularly those exposed to

continuous high temperatures

• Used successfully on plain and roller bearings of

conveyor installations in drying kilns, vulcanizing plants,

heating installations, fans and electric motors

• Contains no lead or nickel

• Suitable for long-term lubrication due to low oil

evaporation and low tendency towards oxidation

• Emergency running properties and reduction of wear by

virtue of incorporated solid lubricants

• No drop point: consequently no melting or run-out from

lubrication point

• Good water wash-out resistance

High duty mineral oil grease containing solid lubricants.

• Sliding contact bearings in audio and video recorders,

CD players and cameras, gears of household machines,

photocopiers and other office machinery

• Good pressure resistance

• Good water resistance

• Very low coefficient of friction

• Compatible with many plastics and elastomers

• Well suited for fibre reinforced plastics

Composition

• Mineral oil

• Inorganic thickener

• Corrosion inhibitor

• Solid lubricants

• White oil

• Lithium soap

• Solid lubricants

Typical Properties

Color

Consistency, penetration, density, viscosity

NLGI consistency class

Unworked penetration

Worked penetration

Density at 20°C

Base oil viscosity at 40°C

Base oil viscosity at 100°C

Temperature

Service temperature

Drop point

Low temperature torque test

Initial break-away torque

Break-away torque

Torque after 20 minutes running time

Kesternich method - flow pressure at -20°C

Kesternich method - flow pressure at -40°C

Load-carrying capacity, wear protection,

service life

Four-ball tester

Weld load

Wear scar under 600N load

Wear scar under 800N load

FAG roller element bearing tester

FE 9, 1500/6000-110, F 50

FAG roller element bearing tester

FE 9, 4500/6000-130, F 50

Almen-Wieland machine

OK load

Frictional force with OK load

Fretting corrosion – Deyber tester

Coefficient of friction

Steel ball against plastic surface

(POM) Ø ball = 12.7mm, load = 6.3N,

v = 10mm/s, 24h

Resistance

Water resistance, static evaluation step

Oxidation resistance, pressure drop 100h, 99°C

Corrosion protection

SKF-Emcor method Degree of corrosion

Oil separation - evaporation

Standard test

Oil bleeding, 24h, 100°C

Oil evaporation, 22h, 99°C

Speed

DN value

Application method

mm/10

mm/10

g/ml

mm 2 /s

mm 2 /s

°C

°C

Nm

Nm

Nm

mbar

mbar

N

mm

mm

h

h

N

N

µ

bar

%

%

%

mm/min

Black

2

265-295

0.86

260

-30 to +160, +180 for short periods

None

593x10 -3

68x10 -3

2200

1.3

20000

3085

0-1

2.0

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

White

1-2

300-330

0.93

80

-30 to +130

208

3200

0.45

0.01

0.01

0

5.2

4.0

0.7

Clean contact surfaces. Apply grease using a brush, grease

gun or automatic lubricating system. Grease can be used in

centralized lubrication systems. Do not mix with other greases.

Due to the many plastics available, compatibility and performance

tests should always be carried out with the material

specified and the lubricant selected prior to their final use.

Packages

Usable life and storage

Tin: 1kg

Container: 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

Tin: 1kg

Container: 16kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 36 months

from the date of production.

26


1102

For gas taps and cocks with metal, glass and plastic

combinations.

• Used successfully with natural gas stop-cocks of main

and secondary lines in domestic equipment,

instantaneous water heaters and similar equipment

• Lubrication of smaller taps made of metal, glass or

plastic

• Highly resistant to water

• No drop point therefore no melting or leakage from

lubrication points

• Mineral oil

• Inorganic thickener

• Solid lubricants

Black

approx. 3

205-240

0.96

900

42

0 to +160, short term +220

None

Longterm 00

Fluid grease for the lubrication of highly stressed

transmissions with metal gears.

• Closed gears that are subjected to frictional corrosion

and moisture

• Used successfully for gears that are subjected to

frictional corrosion and moisture

• Extremely high load-carrying capacitiy

• Resistant to galling through mixed friction.

• Wear protection due to solid lubricants and extreme

pressure (EP) additives

• Extremely adhesive due to incorporated adhesion

improver

• Good protection against corrosion

• Contains no lead or nickel

• Mineral oil

• Lithium soap

• Solid lubricants

• Corrosion inhibitor

• Adhesion improver

• EP additives

Black

00

400-430

0.93

300

-40 to +110

190

G 67

Soft, adhesive extreme pressure solid lubricant grease.

• Spur gear systems, load chains, settling shims, springs,

shaft-hub connection, encapsulated joints, gears, linear

motion guides

• Excellent protection against fretting corrosion

• Good load carrying capacity

• High level of protection against wear

• Particularly adhesive

• Mineral oil

• Lithium soap

• Adhesion improver

• Solid lubricants

Beige

1

310-340

1.12

115

-25 to +120

155

1120x10 -3

220x10 -3

340

2100

0.85

3400

0.9

4800

0.75

14500

1300

12000

20000

>36x10 6

0.08

0-90

1.3

0.0

1-90

0.3

1 (sea water)

2.5

0-1

4.3

Clean contact surfaces. Apply grease using a brush, grease

gun or automatic lubricating system. Grease can be used

in centralized lubrication systems.

Do not mix with other greases.

Due to the many plastics available, compatibility and performance

tests should always be carried out with the material

specified and the lubricant selected prior to their final use.

Tube: 50g

Tin: 1kg

Container: 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Containers: 5kg, 50kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Cartridge: 400g

Tin: 1kg

Container: 50kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

27


Mineral Oil Greases Oil Greases

Description

Applications

Features

Composition

Typical Properties

Color

Consistency, penetration, density, viscosity

NLGI consistency class

Unworked penetration

Worked penetration

Density at 20°C

Base oil viscosity at 40°C

Base oil viscosity at 100°C

Temperature

Service temperature

Drop point

Low temperature torque test

Initial break-away torque

Break-away torque

Torque after 20 minutes running time

Kesternich method - flow pressure at -20°C

Kesternich method - flow pressure at -40°C

Load-carrying capacity, wear protection,

service life

Four-ball tester

Weld load

Wear scar under 600N load

Wear scar under 800N load

FAG roller element bearing tester

FE 9, 1500/6000-110, F 50

FAG roller element bearing tester

FE 9, 4500/6000-110, F 50

Almen-Wieland machine

OK load

Frictional force with OK load

Fretting corrosion – Deyber tester

Coefficient of friction

Steel ball against plastic surface

(POM) Ø ball = 12.7mm, load = 6.3N,

v = 10mm/s, 24h

Resistance

Water resistance, static evaluation step

Oxidation resistance, pressure drop 100h, 99°C

Corrosion protection

SKF-Emcor method Degree of corrosion

Oil separation - evaporation

Standard test

Oil bleeding, 24h, 100°C

Oil evaporation, 24h, 100°C

Speed

DN value

Application method

Packages

mm/10

mm/10

g/ml

mm 2 /s

mm 2 /s

°C

°C

Nm

Nm

Nm

mbar

mbar

N

mm

mm

h

h

N

N

µ

bar

%

%

%

mm/min

Product

165 LT 1122

Gearwheel grease for the lubrication of highly stressed

open gears and reducing gears made of metal, with a

peripheral speed of up to 2.5 m/s.

• Open gears that are subjected to high stresses and bad

weather effects

• Successfully used in crushing plants and in transmission

gears and threaded spindles of heavy, crank-driven

presses

• Extremely high load-carrying capacity

• Wear protection and reduction of existing pitting in gear

teeth flanks during operation, due to the solid lubricants

incorporated in the grease. Extremely adhesive due to

build-in adhesion improver

• Good protection against corrosion (corrosion index 0

when tested using the SKF-Emcor method)

• Contains no lead or nickel

• Mineral oil

• Lithium soap

• Solid lubricants

• Corrosion inhibitor

• Adhesion improver

• EP additives

Black

240-270

0.96

320

-25 to +120

175

880x10 -3

115x10 -3

1350

4400

1.2

20000

2900

2-90

0.2

0

1.2

Clean contact surfaces. Apply grease using a hard brush

or a spatula. Do not mix with other greases.

Tin: 1kg

Container: 5kg

Synthetic grease with solid lubricants.

• Used for initial lubrication of chains with hollow pins

equipped with grease nipples, e.g. high tenter clamp

chains in the textile industry and conveyor chains in food

sterilizer units

• Also used for gear drives and open gears, sliding

bearings operating at low speeds and high temperatures,

such as bearings in drying systems and calendaring

machines used in various industrial processes

• Emergency lubrication

• High pressure resistance

• High wear protection

• Extremely adhesive

• Resistance against water

• Synthetic oil

• Solid lubricants

• Inorganic thickener

• Adhesion improver

Black

250-280

0.95

1500

+10 to +160

2600

0.9

18000

Clean contact surfaces.

Chains: Fill chain pins with grease, relubricate through

grease nippels.

Gears and sliding contacts: Apply grease by spatula, brush

or grease gun.

Do not mix with other greases.

Aerosol: 400ml

Container: 25kg

Usable life and storage

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

28


MKL-N

Mineral oil grease with solid lubricants dispersed in solvent.

• Used for lubrication of chains

• Penetration

• Adhesion

• Protection against wear

• Corrosion protection

• Ageing stability

• Mineral oil

• Inhibitors

• Adhesion improver

• Solid lubricants

• Solvents

Black

0.87

1200

0.9

0-1

Apply thinly to clean, dry surfaces using a brush or the

aerosol can. Small chains can also be dipped. The chain

can be used after solvent evaporation (approx. 30 min).

Aerosol: 400ml

Tin: 1kg

Container: 5kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 36 months

from the date of production.

29


Semi-synthetic Greases Greases

Product

G 68 PG 75

Description

Applications

Features

Composition

Typical Properties

Color

Penetration, density, viscosity

NLGI consistency class

Worked penetration

Density at 20°C

Base oil viscosity at 40°C

Temperature

Service temperature

Drop point

Low temperature torque test

Initial break-away torque

Torque after 20 minutes running time

Kesternich method - flow pressure at -20°C

Load-carrying capacity, wear protection,

service life

Four-ball tester

Weld load

Wear scar under 400N load

Wear scar under 600N load

Almen-Wieland machine

OK load

Coefficient of friction

Steel ball against plastic surface (POM)

dia (ball) = 12.7mm; load = 5N;

v = 10cm/s, 24h

Resistance

Oxidation resistance, pressure drop 100h, 99°C

Corrosion protection

SKF Emcor method - Degree of corrosion

Oil separation

standard test

Oil bleeding, 24h, 100°C

Oil evaporation, 24h, 100°C

Application method

Packages

Usable life and storage

mm/10

g/ml

mm 2 /s

°C

°C

Nm

Nm

mbar

N

mm

mm

N

µ

bar

%

%

%

Partly synthetic grease for enclosed steel and plastic

gears.

• Used in gears of electrical toothbrushes and paper

shredders

• High water resistance

• Low coefficient of friction

• Good compatibility with most plastics

• Mineral oil

• Polyalphaolefine

• Lithium soap

• EP additives

• Solid lubricants

Beige

2-3

250-280

0.85

75

-30 to +140

190

1900

0.75

18500

0.014

0.1

0

3.4

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Containers: 5kg, 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

Lubricating grease for plastic/plastic and plastic/metal

combinations with slow to medium-fast movements and

light loads.

• Used on vehicle track-rod joints

• Suitable for long-term lubrication

• Good low temperature characteristics

(usable down to -40°C)

• Very low coefficient of friction

• Compatible with many plastics and elastomers

• Mineral oil

• Polyalphaolefine

• Lithium soap

• Solid lubricants

Beige

approx. 2

270-300

0.86

32

-40 to +130

>190

222x10 -3

36x10 -3

280

1300

0.8

0.02

1-2

4.8

2.4

0.2

Clean contact surfaces. Apply grease using a brush,

grease gun or automatic lubricating system. Grease can

be used in centralized lubrication systems.

Do not mix with other greases.

Due to the many plastics available, compatibility and performance

tests should always be carried out with the material

specified and the lubricant selected prior to their final use.

Tin: 1kg

Containers: 5kg, 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

30


Synthetic Greases, Greases, PAO PAO

EM-30L, EM-30LG

Product

EM-50L

Description

Applications

Features

Composition

Typical Properties

Color

Consistency, density, viscosity

NLGI consistency class

Worked penetration

Density at 20°C

Base oil viscosity at 40°C

Base oil viscosity at 100°C

Specific gravity at 25°C

Temperature

Service temperature

Drop point

Low temperature torque test

Low temperature torque test at -40°C

Starting torque

Torque after 20 minutes running time

Low temperature torque test at -50°C

Initial break-away torque

Torque after 20 minutes running time

Kesternich method - flow pressure at -20°C

Load-carrying capacity, wear protection,

service life

Four ball tester

Weld load

Weld load

Wear scar under 400N load

Almen-Wieland machine

OK load

Coefficient of friction

Steel ball against plastic surface

(POM) Ø ball = 12.7mm; load = 6.3N;

v = 10mm/s; 24h

Dn value

Resistance

Oxidation resistance, pressure drop 100h, 99°C

Corrosion protection

SKF-Emcor method Degree of corrosion

Oil separation – evaporation

Standard test

Oil bleeding, 24h, 100°C

Oil evaporation, 22h, 99°C

Application method

Packages

Usable life and storage

mm/10

g/ml

mm 2 /s

mm 2 /s

g/ml

°C

°C

Nm

Nm

Nm

Nm

mbar

kg

N

mm

N

µ

mm/min

bar

%

%

%

High performance greases for plastic/plastic, plastic/metal

and rubber/metal combinations involving slow and

medium-fast movements and medium to heavy loadings.

• Suitable for lubrication points with medium to heavy

loadings and low to medium speeds

• Contains no lead or nickel

• High load carrying capacity

• Suitable for long-term lubrication by virtue of low oil

evaporation and low tendency towards oxidation

• Low friction coefficient

• Compatible with most plastics and elastomers

• Polyalphaolefine

• Lithium soap

• Solid lubricants

EM-30L: White, EM-30LG: Light Green

1

310-340

0.90

90

-45 to +150

195

110 x 10 -3

51 x 10 -3

177 x 10 -3

77 x 10 -3

80

3800

0.4

16000

0.05

0.02

2-3

9.2

5.0

0.4

Clean contact surfaces. Apply grease using a brush,

spatula or automatic lubricating system. Grease can be

used in centralized lubrication systems.

Do not mix with other greases.

Due to the many different plastics available, compatibility

and performance tests should always be carried out with

the material specified and the lubricant selected, prior to

their final use.

Tin: 1kg

Container: 16kg

When stored at or below 20°C in the original unopened

containers, these products have a usable life of 36 months

from the date of production.

Synthetic hydrocarbon oil/lithium soap grease. It has

excellent compatibility with plastics such as polyacetals

and polyamides, and is formulated for enhanced surface

adhesion and noise damping.

• Designed for plastic/plastic and plastic/metal lubrication

in electromechanical applications such as small gears

and moving components in printers, tape recorders and

CD players

• Wide service temperature range

• Compatible with many plastics

• Good lubricity

• Formulated for enhanced surface adhesion

• Noise damping

• Polyalphaolefine

• Lithium soap

White/semi-transparent

1

310-340

0.84

1050

-40 to +150

195

300 x 10 -3

140 x 10 -3

1400

0.7

0.12

0.02

1

4.9

2.5

0.3

Clean contact surfaces. Apply grease using a brush,

spatula or automatic lubricating system.

Do not mix with other greases.

Due to the many different plastics available, compatibility

and performance tests should always be carried out with

the material specified and the lubricant selected, prior to

their final use.

Tin: 1kg

Container: 16kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 36 months

from the date of production.

31


Synthetic Greases, Greases, PAO PAO

EM-60L

Product

YM-102

Description

Applications

Low temperature synthetic grease containing solid

lubricants.

• Auto-focus of video cameras, electrical motors

operating at low temperatures

Synthetic lithium soap-based grease.

• Heavy duty grease for plastic/plastic and plastic/metal

pairs at low to moderate speeds to high loads (e.g. highly

stressed plastic gears in cars and in audio-video units)

Features

• Extremely low torque at low temperatures

• High pressure resistance

• Low coefficient of friction

• Compatible with most plastics

• Suitable for long term lubrication

• Broad service temperature range

• Good plastic compatibility

• High load carrying capacity

• Low coefficient of friction

• Free from molybdenum disulphide

Composition

Typical Properties

Color

Consistency, density, viscosity

NLGI consistency class

Worked penetration

Density at 20°C

Base oil viscosity at 40°C

Base oil viscosity at 100°C

Specific gravity at 25°C

Temperature

Service temperature

Drop point

Low temperature torque test

Low temperature torque test at -40°C

Starting torque

Torque after 20 minutes running time

Low temperature torque test at -50°C

Initial break-away torque

Torque after 20 minutes running time

Kesternich method - flow pressure at -20°C

Load-carrying capacity, wear protection,

service life

Four ball tester

Weld load

Weld load

Wear scar under 400N load

Almen-Wieland machine

OK load

Coefficient of friction

Steel ball against plastic surface

(POM) Ø ball = 12.7mm; load = 6.3N;

v = 10mm/s; 24h

Dn value

Resistance

Oxidation resistance, pressure drop 100h, 99°C

Corrosion protection

SKF-Emcor method Degree of corrosion

Oil separation – evaporation

Standard test

Oil bleeding, 24h, 100°C

Oil evaporation, 22h, 99°C

Application method

Packages

Usable life and storage

mm/10

g/ml

mm 2 /s

mm 2 /s

g/ml

°C

°C

Nm

Nm

Nm

Nm

mbar

kg

N

mm

N

µ

mm/min

bar

%

%

%

• Polyalphaolefine

• Lithium soap

• Solid lubricants

White

1

310-340

0.88

18

-60 to +130

195

39 x 10 -3

20 x 10 -3

3100

0.8

16500

0.06

0.02

6.2

5.0

0.3

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Do not mix with other greases.

Due to the many different plastics available, compatibility

and performance tests should always be carried out with

the material specified and the lubricant selected, prior to

their final use.

Tin:1kg

Container: 15kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 36 months

from the date of production.

• Polyalphaolefine

• Lithium soap

• Solid lubricants

Yellow

1-2

285-315

0.91

29

-50 to +150

195

78 x 10 -3

34 x 10 -3

4200

0.4

0.03

0.02

0

4.1

3.8

0.2

Clean contact surfaces. Apply grease using a brush,

spatula or automatic lubricating system. Grease can be

used in centralized lubrication systems.

Do not mix with other greases.

Due to the many different plastics available, compatibility

and performance tests should always be carried out with

the material specified and the lubricant selected, prior to

their final use.

Tin: 1kg

Container: 16kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 36 months

from the date of production.

32


YM-103

G-4500

G-4700

High performance grease for metal/metal, metal/plastic

and plastic/plastic combinations, involving slow to fast

movements and medium to heavy loads.

• Suitable for frictional contacts involving medium to heavy

loads and low to high speeds, particularly those which

have to remain fully serviceable at low temperatures

• Used successfully on the adjusting gear of rear-view

mirrors in cars; in car steering systems and videorecorders

• Contains no lead or nickel

• Suitable for long-term lubrication by virtue of low

tendency towards oxidation

• High load carrying capacity

• Good water-wash-out resistance

• Low-starting torque

• Compatible with many plastics and elastomers

• Polyalphaolefine

• Lithium soap

• Solid lubricants

Specialty lubricant that combines the benefits of wide

operating temperature and broad compatibility with varied

materials.

• Long-term lubrication for assembly and maintenance

• Can be used in food-processing applications involving

mixers, motors, conveyors, low-temperature equipment,

packaging machines and many other applications in or

out of the food processing industry where a white grease

may be desirable. Such applications may involve

furniture, instrumentation, photo and optical equipment

• Multi-purpose capabilities

• Wide temperature operating range

• Broad compatibility

• Complies with FDA Regulation 21 CFR 1789.3570 as a

lubricant with incidental food contact

• Polyalphaolefine

• Aluminium complex thickeners

• Solid lubricants

Specialty lubricant that combines the benefits of wide

operating temperature and broad compatibility with varied

materials.

• Long-term lubrication for assembly and maintenance

• Can be used in most non-food related grease

applications such as metal working machines, motors,

fans, blowers, conveyors, wheel bearings and custom

machinery where heavy duty, long-lasting lubrication is

desired

• Multi-purpose capabilities

• Wide temperature operating range

• Broad compatibility

• Meets Cinncinnati Machine P-64, Ford ESA-MIC75-B,

GM998525H

• Polyalphaolefine

• Lithium complex thickeners

• Solid lubricants

Yellow

1-2

285-315

0.9

29

-45 to +150

195

White

280

30

5.6

0.84

-51 to +163

271

Black

280

30

5.6

0.87

-40 to +177

285

93 x 10 -3

49 x 10 -3

900 x 10 -3

2300 x 10 -3

5200

0.4

315

0.5

400

0.35

0.02

325000

350000

3.2

3.0

0.2

Clean contact surfaces. Apply grease using a brush,

spatula or automatic lubricating system. Grease can be

used in centralized lubrication systems.

Do not mix with other greases.

Due to the many different plastics available, compatibility

and performance tests should always be carried out with

the material specified and the lubricant selected, prior to

their final use.

Tin: 1kg

Container: 16kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 36 months

from the date of production.

2.5

0.2

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Tube: 85g

Cartridge: 400g

Container: 16kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

3.8

0.5

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Tube: 85g

Cartridge: 400g

Container: 16kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

33


Synthetic Greases, Greases, PAO PAO

EM-D110

Product

PG-661

Description

Applications

Features

Composition

Typical Properties

Colour

Consistency, density, viscosity

NLGI consistency class

Worked penetration

Density at 20°C

Base oil viscosity at 40°C

Specific gravity at 25°C

Temperature

Service temperature

Drop point

Low temperature torque test

Low temperature torque test at -40°C

Starting torque

Torque after 20 minutes running time

Low temperature torque test at -50°C

Initial break-away torque

Torque after 20 minutes running time

Kesternich method - flow pressure at -20°C

Load-carrying capacity, wear protection

service life

Four ball tester

Weld load

Weld load

Wear scar under 400N load

Almen-Wieland machine

OK load

Coefficient of friction

Steel ball against plastic surface

(POM) µ= Ø ball = 12.7mm; load = 6.3N;

v = 10mm/s; 24h

Dn value

Resistance

Oxidation resistance, pressure drop 100h, 99°C

Corrosion protection

SKF-Emcor method Degree of corrosion

Oils separation - evaporation

Standard test

Oil bleeding, 24h, 100°C

Oil evaporation, 22h, 99°C

Application method

Packages

Usable life and storage

mm/10

g/ml

mm 2 /s

g/ml

°C

°C

Nm

Nm

Nm

Nm

mbar

kg

N

mm

N

mm/min

bar

%

%

%

Molykote EM-D110 is designed for plastic parts with better

compatibity

• Plastic lubrication in automotive parts, electronics

assembly, precision instruments, Audio equipment, office

machines

• It is used for noise damping of plastic gears and improve

feeling of moving parts

• Compatible with many plastics

• Formulated for enhanced surface adhesion and noise

damping

• Low oil bleeding, good for the use does not like stain.

• Not cause the dielectric problem because of non-silicone

product

• Poly olefine

• Lithium soap

• PTFE Solid lubricants

White

0-1

340-370 (unworked)

0.86

9850

-10 to +150

+195

0.02

2.5

0.2

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Tin: 1kg

When stored at or below 20°C in the original unopened

container, this product has a usable life of 60 months from

the date of production.

High performance lithium soap grease containing several

kinds of solid lubricants in a non-silicone, synthetic oil.

Prevents contamination to surroundings, contact problem,

and lubrication problem due to dry grease.

Provides both low torque at low temperature and noise

elimination of plastic gears.

• Lubrication for audio-visual equipments, precision and

optical appliances

• Lubrication for various automotive actuators

• Lubrication where non-oil spreading is required

• Little oil spreading

• Good compatibility with plastics

• High load carrying capacity

• Anti-corrosive

• Synthetic oil

• Lithium soap

• Solid lubricants

Light green

1

300-340

0.88

200

-40 to +150

+195

130 x 10 -3

69 x 10 -3

0.6

3.0

0.2

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Tin: 1kg

Container: 16kg

When stored at or below 20°C in the original unopened

container, this product has a usable life of 60 months from

the date of production.

34


PG-662

PG-663

6166

High performance lithium soap grease containing several

kinds of solid lubricants in a non-silicone, synthetic oil.

Prevents contamination to surroundings, contact problem,

and lubrication problem due to dry grease.

High load carrying capacity and can be used metal to meta

lubrication as well as plastic to plastic lubrication.

• Lubrication for audio-visual equipment, precisions and

optical appliances

• Lubrication for various automotive actuators

• Lubrication where non-oil spreading is required

High performance lithium soap grease containing several

kinds of solid lubricants in a non-silicone, synthetic oil.

Outstanding non-oil spreading property.

Provides both log life-time lubrication and good

compatibility with plastics.

• Lubrication for audio-visual equipment, precisions and

optical appliances

• Lubrication for various automotive actuators

• Lubrication where non-oil spreading is required

High performance lithium soap grease containing several

kinds of solid lubricants in synthetic hydrocarbon oil.

Good compatibility with plastics, noise prevention and

provides and adequate sliding torque.

• Little oil spreading

• High load carrying capacity

• Low torque

• Good compatibility with plastics and rubber

• Little oil spreading

• Wide temperature range

• Low torque

• Good compatibility with plastics and rubber

• Wide temperature range

• Excellent adhesive property

• Good compatibility with plastics and rubber

• Synthetic oil

• Lithium soap

• Solid lubricants

Yellow-green

1-2

285-315

0.90

29

White

1

310-340

0.87

29

White

1

310-340 (unworked)

0.86

1300

-45 to +150

+195

-50 to +130

+195

-40 to 130

+195

78 x 10 -3

39 x 10 -3

64 x 10 -3

29 x 10 -3

660 x 10 -3

310 x 10 -3

5100

0.40

1900

0.50

0.39

0.02

0.02

0.02

3.5

0.1

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Tin: 1 kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months from

the date of production.

5.0

0.5

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Tin: 1kg

Container: 16kg

When stored at or below 20°C in the original unopened

container, this product has a usable life of 60 months

from the date of production.

1.5

0.2

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Tin: 1kg

When stored at or below 20°C in the original unopened

container, this product has a usable life of 60 months

from the date of production.

35


Synthetic Greases, Greases, POE POE

BG 20

Product

Description

Applications

Features

Composition

Typical Properties

Color

Consistency, density, viscosity

Unworked penetration

Density at 20°C

Base oil viscosity at 40°C

Temperature

Service temperature

Drop point

Low temperature torque test

Low temperature torque test at -20°C

Starting torque

Torque after 20 minutes running time

Low temperature torque test at -50°C

Starting torque

Torque after 20 minutes running time

Load-carrying capacity, wear protection,

service life

Four-ball tester

Weld load

Wear scar under 800N load

Almen-Wieland machine

OK load

Frictional force with OK load

FAG rolling element bearing tested FE9,

1500/6000/160, average value

Speed

DN value

Corrosion protection

SKF-Emcor method Degree of corrosion

Oil separation

Standard test

Application method

Packages

Usable life and storage

mm/10

g/ml

mm 2 /s

°C

°C

Nm

Nm

Nm

Nm

N

mm

N

N

h

mm/min

%

High performance grease for metal/metal combinations

involving rapid movements and medium to heavy loadings.

• Suitable for lubrication points with medium to heavy

loadings and high to very high speeds, particularly when

they are also exposed to high temperatures

• Used successfully on clutch release bearings, blower

and calender-roller bearings and electric motor bearings

• Contains no lead or nickel

• High load carrying capacity

• Suitable for long-term lubrication by virtue of low oil

evaporation and low tendency towards oxidation

• Wide service temperature range (-45°C to +180°C;

for short periods up to +200°C)

• Suitable for very high rotational speeds

(DN value 750000)

• Ester oil

• Lithium complex thickener

• EW/AW-Additive

• Oxidation inhibitor

Beige

240-270

1.01

55

-45 to +180, up to +200 for short periods

>295

207x10 -3

130x10 -3

530x10 -3

130x10 -3

2400

1.0

20000

2250

662

750000

1-2

1.2

Clean contact surfaces. Apply grease using a brush,

spatula or automatic lubricating system. Grease can

be used in centralized lubrication systems.

Do not mix with other greases.

Tin: 1kg

Containers: 5kg, 50kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

36


Synthetic Greases, Greases, Fluorosilicone Fluorosilicone

Product

FS 1292 FS 3451

Description

Applications

Features

Composition

Typical Properties

Color

Consistency, density, viscosity

NLGI consistency class

Worked penetration

Density at 20°C

Base oil viscosity at 25°C

Temperature

Service temperature

Drop point

Low temperature torque test

Low temperature torque test at -20°C

Initial break-away torque

Torque after 20 minutes running time

Low temperature torque test at -30°C

Initial break-away torque

Torque after 20 minutes running time

Low temperature torque test at -40°C

Initial break-away torque

Torque after 20 minutes running time

Kesternich method – flow pressure at -20°C

Load carrying capacity, wear protection,

service life

Four ball tester

Weld load

Almen-Wieland machine

OK load

Frictional force with OK load

FAG rolling bearing test equipment,

FE9, 1500/6000/180, F 50

Resistance

Water resistance, static evaluation step

Oxidation resistance, pressure drop 100h, 99°C

Oil separation

Standard test

Application method

Packages

Usable life and storage

mm/10

g/ml

mm 2 /s

°C

°C

Nm

Nm

Nm

Nm

Nm

Nm

mbar

N

N

N

h

bar

%

Extreme pressure, high temperature fluoro-silicone grease.

• Lubricating grease for metal/metal combinations with

slow to medium-fast movements and medium loads

over a wide temperature range

• Particularly suitable for long-term lubrication by virtue

of its extremely low tendency towards oxidation

• High drop point (>250°C); consequently reduced risk

of melting and run-out from lubrication point

• Wide service temperature range (-40°C to +200°C;

for short periods up to +230°C)

• High resistance to water and water washout

• Resistant to mineral oil, fuels and many chemicals

• Fluorosilicone oil

• Organic thickener

Whitish

1-2

280-340

1.28

1000

-40 to +200, up to +230 for short periods

>250

118 x10 -3

41 x10 -3

856x10 -3

56x10 -3

3400

0.3

Clean contact surfaces. Apply grease using a brush,

grease gun or automatic lubricating system. Grease can

be used in centralized lubrication systems. Do not mix with

other greases.

Tube: 100g

Tin: 1kg

Containers: 5kg, 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

Heavy duty, chemically resistant, high temperature

fluoro-silicone grease.

• Lubricating grease for metal/metal combinations with

slow to medium-fast movements and medium to high

loads over a wide temperature range. Particularly

suitable in harsh environments found with chemicals,

acids and alkalis

• High oxidation resistance

• High drop point

• Wide service temperature range

(-40°C to +230°C)

• High resistance to water and water washout

• Resistant to most solvents and chemicals

• Fluorosilicone oil

• PTFE thickener

White

2

265-295

1.50

1000

-40 to +230

>260

615 x10 -3

70 x10 -3

3200

20000

250

0

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Tube: 100g

Tin: 1kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 36 months

from the date of production.

37


Synthetic Greases, Greases, Fluorosilicone Fluorosilicone

Product

FS 3452

Description

Applications

Features

Composition

Typical Properties

Color

Consistency, density, viscosity

NLGI consistency class

Worked penetration

Density at 20°C

Base oil viscosity at 25°C

Temperature

Service temperature

Drop point

Low temperature torque test

Low temperature torque test at -20°C

Initial break-away torque

Torque after 20 minutes running time

Low temperature torque test at -30°C

Initial break-away torque

Torque after 20 minutes running time

Low temperature torque test at -40°C

Initial break-away torque

Torque after 20 minutes running time

Kesternich method – flow pressure at -20°C

Load carrying capacity, wear protection,

service life

Four ball tester

Weld load

Almen-Wieland machine

OK load

Frictional force with OK load

FAG rolling bearing test equipment,

FE9, 1500/6000/180, F 50

Resistance

Water resistance, static evaluation step

Oxidation resistance, pressure drop 100h, 99°C

Oil separation

Standard test

Application method

Packages

Usable life and storage

mm/10

g/ml

mm 2 /s

°C

°C

Nm

Nm

Nm

Nm

Nm

Nm

mbar

N

N

N

h

bar

%

Lubricating and sealing grease for metal/metal,

metal/plastic and metal/elastomer combinations involving

slow movements and heavy loadings over very wide

temperature ranges, particularly under unfavorable

environmental influences.

• Suitable for the above friction contacts and service

conditions

• Successfully used on valves, mechanical seals and

pumps, ball-and socket-joints, bearings, on loading

arms for ships and vacuum contained equipment

• Low evaporation

• High oxidation resistance

• Wide service temperature range (-30°C to +230°C)

• High resistance to water and water washout

• Resistant to most solvents and chemicals

• Compatible with many plastics and elastomers

• Fluorosilicone oil

• PTFE thickener

White

2-3

240-280

1.47

10000

-30 to +230

>220

392x10 -3

94 x10 -3

280

4400

15500

3500

0-90

0.0

2.8

Clean contact surfaces. Apply grease using a brush or

grease gun. Do not mix with other greases.

Due to the many plastics available compatibility and

performance tests should always be carried out with the

material specified and the lubricant selected prior to their

final use.

Tube: 100g

Tin: 1kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

38


Synthetic Greases, Greases, PFPE PFPE Product

HP-870

HP-300

Description

Applications

Features

Composition

Typical Properties

Color

Consistency, density, viscosity

NLGI consistency class

Worked penetration

Density at 20°C

Base oil viscosity at 25°C

Specific gravity

Temperature

Service temperature

Drop point

Low temperature torque test

Low temperature torque test at -20°C

Initial break-away torque

Torque after 20 minutes running time

Low temperature torque test at -30°C

Initial break-away torque

Torque after 20 minutes running time

Low temperature torque test at -40°C

Initial break-away torque

Torque after 20 minutes running time

Load-carrying capacity, wear protection,

service life

Four ball tester

Weld load

Wear scar under 400N load

Wear scar under 1200N load

Almen-Wieland machine

OK load

Frictional force with OK load

Resistance

Water resistance, static evaluation step

Water wash-out at 38°C, 1h

Oxidation resistance, pressure drop 100h, 99°C

Vapor pressure, base oil at 20°C

Corrosion protection

SKF-Emcor method Degree of corrosion

Oil separation

Standard test

Evaporation at 200°C/1000 hours

Application method

Packages

Usable life and storage

mm/10

g/ml

mm 2 /s

g/ml

°C

°C

Nm

Nm

Nm

Nm

Nm

Nm

N

mm

mm

N

N

%

bar

torr

%

%

Fully fluorinated grease, provides extraordinary

Performance under extreme conditions.

• Used successfully, for example, for sliding and roller

bearings in refrigeration plants, in pump and fan

bearings, and also for charging equipment in the

chemical and petrochemical industry

• Suitable for long-term lubrication

• High loading capacity

• Can be used over a wide temperature range

(-35 to +250 and up to +280°C for a short period)

• Highly resistant to water

• Resistant to many chemicals

• Compatible with many plastics and elastomers

• Perfluorinated polyether

• PTFE thickener

• Temperature resistant corrosion inhibitor

White

2

265-295

1.96

-35 to +250, up to +280°C for short periods

None

540 x 10 -3

28 x 10 -3

3400

1.3

13000

3500

0-90

2 x10 -6

4

1.7

3.0

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Do not mix with other greases.

Due to the many plastics available compatibility and

performance tests should always be carried out with the

material specified and the lubricant selected prior to their

final use.

Plastic bottle: 100g

Cartridge: 750g

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

Fully fluorinated grease, provides extraordinary

performance under extreme conditions.

Molykote HP-300 Grease is designed for use in wide

temperature range and/or high-vacuum operations

such as semiconductor applications

• Low vapor pressure (base oil)

• Excellent chemical and solvent resistance

• Outstanding high temperature stability

• Good compatibility with elastomers and plastics

• Low temperature service capability

• Perfluoropolyether (PFPE) oil

• Polytetrafluoroethylene (PTFE) thickener

White

2

265-295

2.0

Continuous: -65 to +250, up to +280°C for short periods

None

41 x 10 -3

18 x 10 -3

110x10 -3

36x10 -3

3300

1.1

0.0

4 x 10 -10

1.0

Clean contact surfaces. Apply grease using a brush,

grease gun or automatic lubricating system. Do not mix

with other greases.

Plastic bottles: 100g, 500g

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 36 months

from the date of production.

39


Synthetic Greases, Greases, PFPE PFPE Product

HP-500 6169

Description

Applications

Features

Composition

Typical Properties

Colour

Consistency, density, viscosity

NLGI consistency class

Worked penetration

Density at 20°C

Base oil viscosity at 25°C

Specific gravity

Temperature

Service temperature

Drop point

Low temperature torque test

Low temperature torque test at -20°C

Initial break-away torque

Torque after 20 minutes running time

Low temperature torque test at -30°C

Initial break-away torque

Torque after 20 minutes running time

Low temperature torque test at -40°C

Initial break-away torque

Torque after 20 minutes running time

Load-carrying capacity, wear protection

service life

Four ball tester

Weld load

Wear scar under 400N load

Wear scar under 1200N load

Almen-Wieland machine

OK load

Frictional force with OK load

Resistance

Water resistance, static evaluation step

Water wash-out at 38°C, 1h

Oxidation resistance, pressure drop 100h, 99°C

Vapor pressure, base oil at 20°C

Corrosion protection

SKF-Emcor method Degree of corrosion

Oils separation - evaporation

Standard test

Evaporation at 200°C/1000hours

Application method

Packages

Usable life and storage

mm/10

g/ml

mm 2 /s

g/ml

°C

°C

Nm

Nm

Nm

Nm

Nm

Nm

N

mm

mm

N

N

%

bar

torr

%

%

Fully fluorinated grease provides extraordinary

performance under extreme conditions.

• Can be used under harsh conditions such as high

temperatures, corrosive, solvent, liquefied natural

gasses, high vacuum, etc.

• Clean room equipment and semiconductor

manufacturing equipment where the vaporization of the

lubricating material in undesirable.

• Compatible with most plastics

• Excellent stability at high temperatures

• Superior resistance to chemicals and solvents

• Minimal deterioration due to oxidation, appropriate for

long-term lubrication

• Low vapor pressure

• Perfluoro polyether

• PTFE thickener

White

2

280

2.0

-20 to +250

340 x 10 -3

180 x 10 -3

3400

0.9

2x10 -6

0.4

3.0

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Do not mix with other greases.

Plastic bottles: 100g, 500g

When stored at or below 20°C in the original unopened

container, this product has a usable life of 60 months

from the date of production.

Special lubricant designed for stainless valves for LNG and

LPG.

• Provide the proper sealing for long period and prolong

the maintenance period of valves. Non-in flammability

improve the safety of working environment

• Decrease friction and wear. Prolong the intervals of

grease supplement and gas cock replacement. Minimize

the possibility of leakage problem

• Can be used for long period because of non-solubility to

most chemicals and petroleum

• Not to be dissolved by LNG and LPG

• Excellent lubricity at extreme low temperature

• Not inflammable

• Superior sealing capability with high viscosity

• Meet the grease specification of the Gas Cock Standard,

JIZ S2120

• Perfluoro polyether

• PTFE thickener

White

3

210-250

2.0

-60 to +250

59 x 10 -3

20 x 10 -3

170 x 10 -3

49 x 10 -3

3600

1.0

4 x 10 -10

0.5

1.3

Tin: 1kg

40


Synthetic Grease, Grease Silicone Silicone

Product

Description

Applications

Features

Composition

Typical Properties

Color

Consistency, penetration, density, viscosity

NLGI consistency class

Worked penetration

Unworked penetration

Density at 20°C

Base oil viscosity at 25°C

Temperature

Service temperature

Drop point

Low temperature torque test

Initial break-away torque

Torque after 20 minutes running time

Kesternich method - flow pressure at -20°C

Load carrying capacity, wear protection,

service life

Four ball tester

Weld load

FAG rolling element bearing tester FE9,

1500/6000-150, F 50

Resistance

Water resistance, static evaluation step

Oxidation resistance, pressure drop 100h, 99°C

Coefficient of friction

Steel ball against plastic surface (POM)

Ø ball = 12.7mm load = 6.3N, v = 10mm/s, 24h

Corrosion protection

SKF-Emcor method - degree of corrosion

Oil Separation

Standard test

Separation, 24 hours, 150°C

Application method

Packages

Usable life and storage

mm/10

mm/10

g/ml

mm 2 /s

°C

°C

Nm

Nm

mbar

N

h

bar

µ

%

%

33 Light 41

Lubricating grease for metal/metal, metal/plastic

combinations involving slow to medium-fast movements

and light load, especially over a wide range of

temperatures.

• Used successfully for rollers in mobile refrigerating

equipment and refrigerating plants, control cables,

electric clocks, motors, windscreen wiper motors, vehicle

starter motors, photographic and optical equipment,

surveying instruments

• High oxidation resistance

• Wide service temperature range (-73°C to +180°C)

• Good low temperature performance

• Compatible with many plastics

• Water resistant

• Silicone oil

• Lithium soap

Pink

1

300-340

1.0

100

-73 to +180

220

(at -73°C) 130x10 -3

(at -73°C) 13x10 -3

1400

3.2

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Due to the many plastics available, compatibility and

performance tests should always be carried out with the

material specified and the lubricant selected prior to their

final use.

Tube: 100g

Tin: 1kg

Containers: 25kg, 50kg

Drum: 180kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

Silicone grease for very high temperature applications at

low speeds.

• Suitable for rolling-element bearings in oven conveyors,

kiln cars and pumps for molten salts, governor linkage of

steam turbines

• Non-melting

• High temperature stability

• High oxidation resistance

• Good resistance against water wash-out

• Silicone oil

• Carbon black

• Corrosion inhibitor

Black

approx. 2

260-300

1.1

316

-20 to +290

None

(at -20°C) 136x10 -3

(at -20°C) 80x10 -3

1500

1-90

0.4

2.6

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Tube: 100g

Tin: 1kg

Containers: 5kg, 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

41


Synthetic Grease, Grease Silicone Silicone

Product

44 Light 44 Medium

Description

High temperature bearing grease.

High temperature bearing grease.

Applications

• Suitable for rolling-element bearings in oven fans, driers,

conveyors, clutch release bearings, plastic components

• Suitable for rolling-element bearings in oven fans, driers,

conveyors, clutch release bearings, plastic components

Features

Composition

• Low evaporation

• High oxidation resistance

• Good resistance to water wash-out

• Compatible with many plastics

• Wide service temperature range

• Silicone oil

• Lithium soap

• Low evaporation

• High oxidation resistance

• Good resistance to water wash-out

• Compatible with many plastics

• Wide service temperature range

• Silicone oil

• Lithium soap

Typical Properties

Color

Consistency, penetration, density, viscosity

NLGI consistency class

Worked penetration

Unworked penetration

Density at 20°C

Base oil viscosity at 25°C

Temperature

Service temperature

Drop point

Low temperature torque test

Initial break-away torque

Torque after 20 minutes running time

Kesternich method - flow pressure at -20°C

Load carrying capacity, wear protection,

service life

Four ball tester

Weld load

FAG rolling element bearing tester FE9,

1500/6000-150, F 50

Resistance

Water resistance, static evaluation step

Oxidation resistance, pressure drop 100h, 99°C

Coefficient of friction

Steel ball against plastic surface (POM)

Ø ball = 12.7mm load = 6.3N, v = 10mm/s, 24h

Corrosion protection

SKF-Emcor method - degree of corrosion

Oil Separation

Standard test

Separation, 24 hours, 150°C

Application method

Packages

mm/10

mm/10

g/ml

mm 2 /s

°C

°C

Nm

Nm

mbar

N

h

bar

µ

%

%

Brown

1-2

290-330

1.02

125

-40 to +200

>210

(at -40°C) 225x10 -3

(at -40°C) 60x10 -3

110

0

2.4

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Due to the many plastics available, compatibility and

performance tests should always be carried out with the

material specified and the lubricant selected prior to their

final use.

Containers: 5kg, 45kg

Brown

2-3

240-280

1.03

125

-40 to +200

>210

(at -40°C) 336x10 -3

(at -40°C) 124x10 -3

110

0.1

1.4

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Due to the many plastics available, compatibility and

performance tests should always be carried out with the

material specified and the lubricant selected prior to their

final use.

Tube: 100g

Tin: 1kg

Containers: 5kg, 25kg

Usable life and storage

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

42


7348

PG 21

PG 54

High temperature silicone grease for rolling-element

bearings.

• Used successfully on bearings in driers and on conveyor

chains of wood coatings plants. Also suitable for

sterilizers

• Low evaporation

• High oxidation resistance

• Good long term lubrication

• High drop point

• Water resistant

• Silicone oil

• Lithium complex thickener

• Anti-oxidant

• Solid lubricants

High performance grease for plastic/plastic and

plastic/metal combinations involving slow to medium-fast

movements and light to medium loadings.

• Suitable for friction contacts with low to medium loadings

and speeds which have to remain serviceable through a

wide temperature range

• Used on control cables, water pumps, bearing bushes,

gearwheels, slideways and other plastic parts in

domestic appliances, toys and electrical appliances

• High oxidation resistance

• Wide service temperature range (-50°C to +190°C)

• High water resistance

• Excellent corrosion protection

• Compatible with many plastics and elastomers

• Silicone oil

• Lithium complex thickener

High performance grease for plastic/plastic, plastic/metal

and rubber/metal combinations involving slow to mediumfast

movements and light to medium loadings.

• Suitable for lubrication points with low to medium

loadings and speeds

• Used in silent block bushings, video and audio cassettes,

water-pump packings, brake-caliper guide bolts, control

cables and on sliding-contact surfaces of washing

machines and dishwashers

• High oxidation resistance

• Wide service temperature range (-50°C to +180°C)

• Good low temperature performance

• Low coefficient of friction

• Good corrosion protection

• Excellent compatibility with most plastics and elastomers

• Silicone oil

• Lithium complex thickener

• Solid lubricants

• EP additive

Light beige

2

265-295

1.09

500

-20 to +230; +250 for short periods

>290

White

2

265-295

0.96

200

-50 to +190

250

(at -20°C) 39x10 -3

(at -20°C) 15x10 -3

210

White

2-3

245-275

1.02

200

-50 to +180

250

(at -50°C) 120x10 -3

(at -50°C) 90x10 -3

280

1500

1600

2000

1-90

0.1

0.1

0.1

0.04

1.9

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Cartridge: 400g

Tin: 1kg

Container: 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

0

4.5

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Due to the many plastics available, compatibility and

performance tests should always be carried out with the

material specified and the lubricant selected prior to their

final use.

Tin: 1kg

Containers: 5kg, 25kg

Drum: 180kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

0-1

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Due to the many plastics available, compatibility and

performance tests should always be carried out with the

material specified and the lubricant selected prior to their

final use.

Tube: 100g

Tin: 1kg

Containers: 5kg, 25kg

Drum: 180kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

43


Synthetic Grease, Grease Silicone Silicone

Product

822 M 55 M

Description

Applications

Features

Composition

High performance grease for metal/metal, metal/plastic

and metal/elastomer combinations.

• Friction combinations with low stresses and low to

moderate speeds which have to function over a wide

temperature range in a wet or moist atmosphere

• Used successfully for vehicle servo brakes and seal

rings in pneumatic and hydraulic systems

• Low evaporation

• Wide service temperature range (-40°C to +200°C)

• Good corrosion protection properties

• Compatible with many plastics and elastomers

• Silicone oil

• Lithium soap

Silicone based lubricant for O-rings.

• Dynamic lubrication between rubber and metal parts in

pneumatic systems in aircraft, automotive and general

industrial applications

• High oxidation resistance

• Wide service temperature range (-65°C to +175°C)

• Good corrosion protection

• Compatible with many plastics and elastomers

• Silicone oil

• Ester

• Lithium soap

Typical Properties

Color

Consistency, penetration, density, viscosity

NLGI consistency class

Worked penetration

Unworked penetration

Density at 20°C

Base oil viscosity at 25°C

Temperature

Service temperature

Drop point

Low temperature torque test

Initial break-away torque

Torque after 20 minutes running time

Kesternich method - flow pressure at -20°C

Load carrying capacity, wear protection,

service life

Four ball tester

Weld load

FAG rolling element bearing tester FE9,

1500/6000-150, F 50

Resistance

Water resistance, static evaluation step

Oxidation resistance, pressure drop 100h, 99°C

Coefficient of friction

Steel ball against plastic surface (POM)

Ø ball = 12.7mm load = 6.3N, v = 10mm/s, 24h

Corrosion protection

SKF-Emcor method - degree of corrosion

Oil Separation

Standard test

Separation, 24 hours, 150°C

Application method

Packages

Usable life and storage

mm/10

mm/10

g/ml

mm 2 /s

°C

°C

Nm

Nm

mbar

N

h

bar

µ

%

%

Whitish

approx. 2

250-280

1.03

400

-40 to +200

(at -40°C) 307x10 -3

(at -40°C) 106x10 -3

0

1.6

0.5

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Due to the many plastics available, compatibility and

performance tests should always be carried out with the

material specified and the lubricant selected prior to their

final use.

Container: 20kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

Pink

approx. 2

260-300

0.96

100

-65 to +175

205

(at -65°C) 325x10 -3

(at -65°C) 35x10 -3

0.1

0.03

0

0.9

Clean contact surfaces. Apply grease using a brush,

spatula, grease gun or automatic lubricating system.

Grease can be used in centralized lubrication systems.

Do not mix with other greases.

Due to the many plastics available, compatibility and

performance tests should always be carried out with the

material specified and the lubricant selected prior to their

final use.

Tube: 100g

Tin: 1kg

Container: 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

44


Dow Corning ® Compounds

Dow Corning silicone compounds are grease-like lubricants

containing silicone fluids and inert silica fillers. They are

resistant to oxidation and thermal degradation while

maintaining their properties over a wide temperature range.

They are designed as release agents and may be used as O-ring

assembly lubricants, non-conductors of electricity, non-curing

sealants and as assembly lubricants for plastic and rubber

parts. Silicone compounds may be used for applications where

they function in a dual role as both lubricant and sealant.

45


Compounds

Dow Corning ® Product

Dow Corning ® 111 Dow Corning ® 4

Description

Applications

Valve lubricant and sealant.

• Lubrication for control and pressure plug valves, water

softener and faucet valves

• Sealant for vacuum and pressure systems

• Sealant for outdoor equipment (also shipboard) subject

to washing and harsh environmental exposure: meters,

electrical service entrance and underground

connections

• Chemical barrier coating

• Rubber and plastic O-rings, gaskets and seals

Grease like material containing an inert silica filler in

combination with selected polydimethyl silicone fluids.

• A moisture proof seal for aircraft, automotive and marine

ignition systems and spark plug connections,

disconnection junctions in electrical wiring systems also

in electrical assemblies and terminals

• Used as a seal in lubricant for cable connectors, battery

terminals, rubber door seals, switches and rubber and

plastic O-rings and as assembly lubricant for various

metal-on-plastic and metal-on-rubber combinations

Features

• Good resistance to most chemicals

• Wide service temperature range (-40°C to +200°C)

• Low vapor pressure

• Low volatility

• Excellent water resistance

• High dielectric strength

• Moisture resistant

• Good thermal oxidation and chemical stability

• Meets MIL-S-8660C

• Retains its grease like consistency from -55°C to +200°C

• Odorless

• Highly water repellent

Composition

Typical Properties

Physical nature

Color

Penetration, density

Density at 25°C

Penetration unworked

Penetration, worked 60, max.

Temperature

Service temperature range

Drop point

Oil separation - evaporation

Bleed 24 hours/200°C , max.

Bleed 30 hours/200°C, max.

Evaporation 24 hours/200°C, max.

Evaporation 30 hours/200°C, max.

Electrical Properties

Dielectric strength, 1.27 mm gap

Permittivity at 100Hz

Dissipation factor at 100Hz

Volume resistivity at 23°C

Arc resistance

Application method

Packages

Usable life and storage

g/ml

mm/10

mm/10

°C

°C

%

%

%

%

kV/mm

Ohm.cm

seconds

• Silicone oil

• Inorganic thickener

• Additives

Stiff compound

White to light grey, translucent

175 to 210

260

-40 to +200

None

0.5

2.0

This product can be applied by hand, specially designed

automated equipment, brushing or wiping. Certain designs

of grease guns may seize up with silicone compounds; test

prior to use.

Tubes: 100g, 150g

Tin: 1kg

Containers: 3.6kg, 5kg, 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

White, translucent

1.0

220

310

-55 to +200

None

6.0

2.0

16

3.1

0.0025

0.10 x 10 15

120

This product can be applied by hand, specially designed

automated equipment, brushing or wiping. Certain designs

of grease guns may seize up with silicone compounds; test

prior to use.

Tube: 150g

Containers: 3.6kg, 18.1kg, 25kg

Drum: 199.5kg

When stored in the original unopened containers, this

product has a usable life of 36 months from the date of

production.

46


Dow Corning ® 7

Polydimethylsiloxane polymer.

Rubber industry:

• Lubricant and preservative for tight fitting parts: they

slide into place quickly and easily

• For difficult release job, e.g. battery cases

Plastic industry:

• Release agent for epoxy resins, polystyrenes, PVC,

polyesters and other plastic materials

Foundry and smelting industries:

• Breaking-in of new or freshly cleaned shells, for core

molds

Other industries:

• Release agent for TNT, rocket propellants, ram heads

and other parts of extruders

• Release agent in forming integral seals for clay tiles

• Heat stable; withstand molding temperatures up to

+200°C

• Minimizes build up on molds due to heat stability and

resistance to oxidation

• Efficient-low quantities required

• Inert to metals and most plastic and organic materials

• Insoluble in water, methanol, ethanol, glycerol, and

mineral oil

White, translucent

1.1

250

270

Up to +200

7.0

2.0

This product may be applied by brushing or wiping. Diluted,

this product may be applied by brushing, wiping or

spraying. Suitable solvents (diluents) include xylene,

mineral spirits, perchloroethylene and methyl ethyl ketone.

Carton: 150g

Containers: 3.6kg, 18.1kg

When stored at or below 25°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

47


Oils / Dispersions

Oils

Molykote oils are either based on hydrocracked mineral oils or

synthetic fluids. Both types are supplied with performance

enhancing additives. Molykote oils are suited for most plant

maintenance applications.

Dispersions

Molykote dispersions are finely divided solid lubricants

suspended in lubricating fluids. They are preferred where

it is necessary to apply solid lubricants in liquid form to

units in operation or to otherwise inaccessible points. Some

dispersions serve as antiwear and extreme pressure additives

for lubricating oils like gear and engine oils.

48


Semi-Synthetic Oils Oils

CO 220

Product

S-1500

Description

Applications

Features

Composition

Typical Properties

Color

Density, viscosity

Density at 15°C

Density at 20°C

Viscosity at 40°C

Viscosity at 100°C

Viscosity index

Temperature

Service temperature

Flash point

Evaporation rate after 24 hours at 200°C

Oxidation resistance after 4 hours at 200°C,

200ml O 2/minute, weight loss

Load-carrying capacity, wear protection,

service life

Four-ball tester (VKA)

Weld load

Four-ball tester (1 hour/400N/1200rpm)

wear scar diameter

Wear scar under 800N load

SRV coefficient of friction (200N, 1mm, 50Hz,

50ºC)

Almen-Wieland machine

OK load

Application method

Packages

Usable life and storage

g/cm 3

g/ml

mm 2 /s

mm 2 /s

°C

°C

%

%

N

mm

mm

N

Chain oil.

• Suitable for lubrication of chains

• Low evaporation

• Contains no solvents

• Synthetic oil

• Antioxidant

• EP additives

Brownish, transparent

0.94

220

1800

0.8

18000

Clean contact surfaces. Apply with a brush, spray can,

spray gun, drop-feed oiler or conventional metering

devices. This product can also be applied by dipping.

Container: 5l, 20l

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

Semi-synthetic oil for lubricating metal chains even at high

temperatures (+200ºC).

• Suitable and used for oil-lubricated chains in lacquering

plants and drying installations

• Wide service temperature range (-10°C to +200°C)

• Longer lubrication intervals even at high temperatures

• Low evaporation rate

• Mixture of mineral and synthetic oils

• Corrosion inhibitors

• EP additives

• Oxidation inhibitors

Yellowish, transparent

0.92

90-110

10-12

>100

-10 to +200

>240


Synthetic Oils Oils

S-1501

Product

S-1502

Description

Applications

Features

Composition

Synthetic oil for lubricating metal chains even at very high

temperatures (+250ºC).

• Suitable and used for oil-lubricated chains in lacquering

plants and drying installations

• Wide service temperature range (-25°C to +250°C)

• Longer lubrication intervals even at very high

temperatures (up to +250°C)

• Low evaporation rate

• Mixture of synthetic oils

• Corrosion inhibitors

• EP additives

• Oxidation inhibitors

Synthetic oil for lubricating metal chains even at very high

temperatures (+250ºC). Very low coefficient of friction.

• All kind of oil lubricated chains

• Suitable and used for oil-lubricated chains in lacquering

plants and drying installations

• Wide service temperature range (-30°C to +250°C)

• Longer lubrication intervals even at very high

temperatures (up to +250°C)

• Very low coefficient of friction

• Mixture of synthetic oils

• Friction improver additives

• Corrosion inhibitors

• EP additives

• Oxidation inhibitors

Typical Properties

Color

Density, viscosity

Density at 15°C

Density at 20°C

Viscosity at 40°C

Viscosity at 100°C

Viscosity index

Temperature

Service temperature

Flash point

Evaporation rate after 24 hours at 200°C

Oxidation resistance after 4 hours at 200°C,

200ml O 2/minute, weight loss

Load-carrying capacity, wear protection,

service life

Four-ball tester (VKA)

Weld load

Four-ball tester (1 hour/400N/1200rpm)

wear scar diameter

Wear scar under 800N load

SRV coefficient of friction (200N, 1mm, 50Hz,

50ºC)

Almen-Wieland machine

OK load

Application method

g/cm 3

g/ml

mm 2 /s

mm 2 /s

°C

°C

%

%

N

mm

mm

N

Yellowish, transparent

0.98

125-140

10.5-12.5

-25 to +250

>250


S-1503

Synthetic oil for lubricating highly stressed metal chains

even at very high temperatures (+250ºC). Very low

coefficient of friction.

• All kind of oil lubricated chains

• Suitable and used for oil-lubricated chains in lacquering

plants and drying installations

• Wide service temperature range (-20°C to +250°C)

• Longer lubrication intervals even at very high

temperatures (up to +250°C)

• Very low coefficient of friction

• Mixture of synthetic oils

• Friction improver additives

• Corrosion inhibitors

• EP additives

• Oxidation inhibitors

Greenish, transparent

0.97

200-240

220

15.5-17.5

-20 to +250

>250


Dispersions

Description

Applications

Product

Omnigliss Spray

Quick-action penetrating agent incorporating corrosion

protection, water-repellent and lubricating properties.

• Suitable for frictional contacts, running at low to medium

speeds, which are not equipped with grease nipples or

oiling holes

• Used on joints, levers, chains and other components of

transport and conveyor equipment, textile machinery,

automatic filling units and all types of packaging

equipment

M 55 Plus

Black dispersion of solid lubricants in mineral oil.

• Used successfully as an additive for mineral oils

Features

Composition

Typical Properties

Color

Density, viscosity

Density at 20°C

Viscosity (4 Din 53211)

Viscosity at 40°C

Base oil viscosity at 40°C

Temperature

Service temperature range

Load-carrying capacity, wear protection,

service life

Four–ball tester (VKA)

Weld load

Wear scar under 800N load

Almen-Wieland machine

OK load

Particle size

Particle size

Application method

Packages

Usable life and storage

g/ml

s

mm 2 /s

mm 2 /s

°C

mm

N

N

µm

• Good penetration

• Water repellent

• High pressure resistance

• Temporary corrosion protection

• Mineral oil

• Solid lubricants

• Corrosion inhibitors

• Stabilizer

Light amber

0.84

11.8

-30 to +80

1.1

2900

Shake before use. Can be applied with a brush, oil can,

spray can, hand-held or compressed-air spraying

equipment, or by dipping. On badly corroded parts, allow

longer to react. Repeat if necessary.

Aerosol: 400ml

Plastic bottle: 500ml

Tin: 5l

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

• Increases load carrying capacity

• Reduces friction and wear

• Reduces running noise

• Improves running-in

• Emergency running properties

• Prevents and reduces pitting in gears

• Mineral oil

• Molybdenum disulphide

• Dispersant

Black

0.91

73.2

Depends on the oil to which Molykote M55 Plus is added

1.35

3000

Add to lubricating and gear oils in quantity of 5% by

volume; for particularly high stress add 10% by volume.

Do not add to aqueous metalworking emulsion. Suitable

for use in all lubricating systems, such as drip oilers, central

lubricating systems, etc.

Use undiluted to improve the operation of hot-boxes.

Tins: 1l, 5l

Container: 20l

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 18 months

from the date of production.

52


M 30

Black dispersion of solid lubricants in synthetic oil.

• Used successfully on chains and rollers of conveyor

belts

• Fluid lubrication up to +200°C

• Dry lubrication up to +450°C

• No resinification

557

Extreme-pressure, dry film lubricant provides exceptional

release and lubricating properties

• In steel production where it can increase slitter-blade life,

resulting in clean, square edges

• In aluminum production where it can lengthen the life of

tools and dies, improve surface finish, lubricate sliding

surfaces and surfaces during extruding, deep drawing or

spinning

• In machine shops where it can improve surface finishes;

extend the life of cutting tools, taps, dies, drills, slitters,

and forming tools; reduce wear and reduce stick-slip or

metal seizure on bearings, slides, cams adjusting

screws, guides and ways

• For textile, paper and woodworking industries where it

can reduce wear and friction and reduce product staining

from spinning frames, knives, scissors, punches, chain,

conveyors or material-handling equipment

• For rubber and plastic industries where it can reduce

sticking, pickup or product contamination from handling

equipment, knives, conveyors or sliding surfaces

• Colorless

• Nonstaining

• Synthetic oil

• Molybdenum disulphide

• Dispersant

Black

• Waxlike, extreme-pressure lubricant

• Supplied as liquid or aerosol

• Remains as wax film after solvent

• Evaporation

Clear

1.0

120

Fluid lubrication up to +200; dry lubrication up to +450

-40 to +43

1.02

2000

0.85

1200

20000

Clean areas of contact before first application. Apply using

brush, oil can, spray gun or drip oiler. Can also be used with

metering equipment and automatic spray devices. Do not

mix with grease or oils.

Can be applied using brush, dipping aerosol can or

automatic luibricator. Only a very thin film is needed for

maximum results. The film is useful immediately after the

solvent evaporates.

Can: 1.5kg

Container: 20kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 12 months

from the date of production.

Spray: 312g

Container: 15.1kg

When stored at or below 25°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

53


Dispersion, Metal Forming Metal Forming

Product

HTF

Description

Applications

Features

Composition

Typical Properties

Color

Density, viscosity

Density at 20°C

Viscosity (4 DIN 53211)

Temperature

Service temperature range (temperature

resistance of solid lubricants)

Load-carrying capacity, wear protection,

service life

Four–ball tester (VKA)

Weld load

Wear scar under 800N load

Application method

Packages

Usable life and storage

g/ml

s

°C

N

mm

White dispersion of solid lubricants in mineral oil.

• Separation and lubrication at high temperatures.

• Used successfully for the hot-rolling of tools and the

drop-forging of taper plugs made from Ms 58

• High load-carrying properties

• Formation of a separating lubricant layer between tool

and machine

• Wide temperature range (-20°C to +1150°C)

• The mineral oil content volatilizes at high temperatures

without leaving any residue

• Extends the service life of tools

• Mineral oil

• Solid lubricant

• Stabilizer

• Thickener

White

0.86

29

-20 to +1150

2100

1.5

Stir well before use. Apply, without thinning, by means

of a brush or spray, to cleaned machines or tool. Can

also be applied using automatic spray units (tube cross

section >3 mm).

Can: 5kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 12 months

from the date of production.

54


Fluorosilicone

Product

FS 1265 Fluid

Description

Applications

Features

Composition

Fluorosilicone fluid designed for lubricating in harsh environments.

• Typically used as a lubricating oil in vacuum pumps handling reactive gases

• In high- and low-temperature bearings

• In bearings subjected to washing by fuels or solvents

• In vapor cycle engines such as those handling steam or Freon ®

• As a base fluid for thickening greases

• Resists oxidation, harsh chemicals, fuels, wide temperature ranges

• Available in 300, 1000 and 10000 cSt

• Service temperature range of -40 to 204°C

Fluorosilicone oil

Fluorosilicone oil

Fluorosilicone oil

Typical Properties

Color

Density, viscosity

Viscosity at -18°C

Viscosity at 100°C

Viscosity at 204°C

Viscosity Temperature Coefficient

Viscosity Index

Specific Gravitiy at 25°C

Temperature

Service temperature range

Melt point

Pour Point

Flash point, closed cup

Fire point

Gel time at 200°C

Coefficient of thermal expansion 25 to 204°C

Volatility

After 4 hours at 200°C

After120 hours at 200°C

Surface Tension

Application method

cSt

cSt

cSt

°C

°C

°C

°C

°C

hours

%

%

Dynes

per cm

Viscosity Grade,

300 centistokes at 25°C

Clear to straw

5500

30

5.5

0.84

220

1.25

-40 to +204

-48

-43

260

>315

552

0.949 x 10 -3

2.0 weight loss

18.0 weight loss

25.7

Viscosity Grade,

1000 centistokes at 25°C

Clear to straw

22000

74

11.5

1.28

-40 to +204

-40

-41

304

>315

576

1.5 weight loss

5.0 weight loss

26.1

Viscosity Grade,

10000 centistokes at 25°C

Clear to straw

440000

690

80

1.30

-40 to +204

-32

-1

315

>315

336

28.7

Packages

Pails: 4.5kg; 22.7kg net weight.

Usable life and storage

When stored in original, unopened containers at room temperature, the product has a shelf life of 48 months

from date of manufacture.

55


Corrosion Protection Protection Oil Oil

Supergliss

Product

Description

Applications

Features

Composition

Typical Properties

Color

Density, viscosity

Density at 20°C

Viscosity at 40°C

Load-carrying capacity, wear protection

Four-ball tester (VKA)

Weld load

Wear scar at 400N load

Corrosion protection

Salt spray test

Application method

Packages

Usable life and storage

g/ml

mm 2 /s

N

mm

h

Lubricating oil with penetrating properties.

• Simplify dismantling of rusty components

• Used as corrosion protection

• Penetration

• Rust loosening properties

• Lubrication

• Corrosion protection

• Mineral Oil

• Adhesion improver

• Solvent

• Corrosion inhibitors

• Propellant

Bright, transparent

0.83

3.6

1400

0.9

8

Can be applied by means of a brush, oil can or spray can

or hand-operated spray equipment. When used as a

corrosion protection, apply thinly and uniformly to the

cleaned areas. Depending on the environmental conditions

repeat the process form time to time.

Aerosol: 400ml

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

56


Mineral oil Oil

Multigliss

Product

Description

Dispersion with penetrating properties.

Applications

Features

Composition

Typical Properties

Color

Density, viscosity

Density at 20°C

Viscosity

Load-carrying capacity, wear protection

Four-ball tester (VKA)

Weld load

Wear scar under 400N load

Application method

Packages

Usable life and storage

g/ml

s

N

mm

• Penetration

• Rust loosening properties

• Lubrication

• Mineral oil

• Solid lubricants

• Stabilizers

• Solvent

• Corrosion inhibitor

Transparent

0.85

12.5

1200

0.72

Shake before use. Can be applied with brush, oil can, spray

can, hand-held or compressed-air spraying equipment or

by dipping. On badly corroded parts, allow longer to react.

Repeat if necessary.

Aerosol: 400ml

Containers: 500cc, 5l

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

57


Coatings

Molykote Anti-Friction Coatings (AF-Coatings) are paint-like

products. They contain, instead of a coloring pigment, submicron

sized particles of solid lubricants dispersed through carefully

selected resin blends and solvents. Important for the lubricating

and corrosion protection properties are the choice of the right

raw materials and the volume concentration of the lubricant

content. In addition to greases and oils, or where possible, as

replacement of those hydrodynamic lubricants, Molykote AF-

Coatings form a slippery film, which covers all surface roughness

and thus protects against surface to surface friction (e.g.

metal to metal, plastic to metal, plastic to plastic) even under

extreme loads. They are applied by conventional painting

techniques: e.g. spraying, dip-spinning or brushing.

58


Dry Film Film Lubricant Lubricant

Product

PTFE-N-UV 106

Description

Air-curing dry lubricant.

Heat-curing dry lubricant.

Applications

Features

Composition

Typical Properties

Color

Physical Properties

Density at 20°C

Viscosity at 20°C (DIN3 cup)

Viscosity at 20°C (DIN4 cup)

Non-volatile content

Temperature

Service temperature range

Drying time at 20 °C

Curing time

Load-carrying capacity, wear protection,

service life

Falex load-carrying capacity

LFW-1, rotating

F=2860N, n=72 rpm, v=7.9m/minute

Number of revolutions x1000 to µ=0.1

LFW-1, rotating

F=680 N, n= 72 rpm, v=7.9 m/min

Number of revolutions x1000 to µ=0.1

LFW-1, oscillating

F=900N, frequency=89.5osc./min.

No. of oscillations to µ=0.08

Corrosion protection

Fretting corrosion - Deyber tester

Salt spray test

Application method

Packages

Usable life and storage

g/ml

s

s

%

°C

min

min./°C

N

h

• Suitable for rubber guides, sliding doors, furniture

hinges, small mechanisms in office machines and

sunroof seals

• For nearly all material combinations such as

metal/metal, plastic/metal, plastic/plastic combinations

involving slow to medium movements and low loads

• The UV indicator enables the end user to readily inspect

and confirm, using UV inspection lamps, that the product

has been applied to the substrate

• Very low coefficient of friction

• Colorless, therefore non-staining

• Detectable on the surface

• PTFE

• Binder

• Solvent

• Ultra-Violet indicator

Colorless

0.87

12

23

-180 to +240

5-10

120/20

b=6*

p=30*

s=10*

Stir the Anti-friction Coating thoroughly before applying by

spraying, dipping, centrifuging or brushing. Recommended

dry film thickness: 5 to 20µm.

Aerosol: 400ml

Containers: 5kg, 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 24 months

from the date of production.

• For smooth coating of metal/metal combinations

• Maintenance-free, permanent lubrication of highly

stressed friction combinations with low speeds or

oscillating operation

• Used where design construction prevents the use of oil

or grease or where the risk of soiling is undesirable

• This product is used successfully for the dry lubrication

of locks, hinges, joints, magnetic armatures and for the

anti-seizure coating of engine and gear components

• Low coefficient of friction

• High load carrying capacity

• Protection from corrosion

• Good adhesion

• Can be painted over

• Solid lubricants

• Organic binder

• Solvent

Dark grey

1.16

42

41

-70 to +250

60/150, 30/180

p=13600*

s=11300*

p=187*

p=409*

2

Stir the Anti-friction Coating thoroughly before applying by

spraying, dipping, centrifuging or brushing. Recommended

dry film thickness: 5 to 20µm.

Tin: 500g

Container: 5kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 12 months

from the date of production.

* Surface pretreatment: b=blanc, p=phosphated, s=sandblasted

59


Dry Film Film Lubricant Lubricant

Product

D 321 R D 708

Description

Air-curing dry lubricant.

Heat-curing dry lubricant.

Applications

Features

• For metal/metal combinations with slow to medium fast

movements and high loads

• Suitable for the permanent lubrication of highly stressed

sliding guides with low sliding speeds, oscillating

movements or intermittent operation

• Improving the running-in process and for lubrication

under high vacuum and at extreme temperatures

• Used successfully for cylinder-head bolts, toaster guides,

car mirror adjustment mechanisms, high voltage

switches, for the running in of highly stressed gear wheel

• Emergency lubricant for parts of the rotor head of wind

energy installations and for groove-free cold extrusion of

steel

• Air drying

• Avoidance of stick-slip

• High ageing resistance

• For plastic/metal and metal/metal combinations for low to

medium loads

• Used on parts for door and locking mechanisms, safety

belts, springs, hinges, pins, and washers

• Suitable for office machines and precision mechanics

• Outstanding corrosion protection

• Good aesthetics

Composition

Typical Properties

Color

Physical Properties

Density at 20°C

Viscosity at 20°C (DIN3 cup)

Viscosity at 20°C (DIN4 cup)

Non-volatile content

Temperature

Service temperature range

Drying time at 20 °C

Curing time

Load-carrying capacity, wear protection,

service life

Falex load-carrying capacity

LFW-1, rotating

F=2860N, n=72 rpm, v=7.9m/minute

Number of revolutions x1000 to µ=0.1

LFW-1, rotating

F=680 N, n= 72 rpm, v=7.9 m/min

Number of revolutions x1000 to µ=0.1

LFW-1, oscillating

F=900N, frequency=89.5osc./min.

No. of oscillations to µ=0.08

Corrosion protection

Fretting corrosion - Deyber tester

Salt spray test

g/ml

s

s

%

°C

min

min./°C

N

h

• Solid lubricants

• Solvents

• Binder

Grey-black

1.07

29

-180 to +450

5

b=4500*

p=12500*

s=6800*

b=212*

p=146*

s=306*

b=178*

p=400*

s=362*

• Solid lubricants

• Organic binder

• Solvent

Black

0.95

12

28

-180 to +240

10

20/200

s=2250*

On request

1x10 6

s=120*

Coefficient of friction

Press-Fit test, µ =

Screw test: Erichsen, µ thread

Screw test: Erichsen, µ head

Application method

Packages

Usable life and storage

0.075

Stir the Anti-friction Coating thoroughly before applying by

spraying, dipping, centrifuging or brushing. Recommended

dry film thickness: 5 to 20µm.

Aerosol: 400ml

Tin: 1kg

Container: 5kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 24 months

from the date of production.

0.12

0.12

Stir the Anti-friction Coating thoroughly before applying by

spraying, dipping, centrifuging or brushing. Recommended

dry film thickness: 5 to 20µm.

Container: 18l

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 6 months

from the date of production.

60

* Surface pretreatment: b=blanc, p=phosphated, s=sandblasted


3400 A Leadfree

Heating curing dry lubricant.

• Sliding contact of metal/metal combinations with slow to

moderately fast movements and high loads

• Used successfully in automotive applications such as:

Pins, springs and bearings surfaces in brakes, body

hinges and linkages

• Moving parts in locks, switches, ventilation controls and

servo mechanisms

• Under the hood linkages exposed to dust, moisture,

fuels, oils and other contaminants

• Hinge pins, sleeve bearings and cams

• Servo mechanism and instrument bearing

Threaded connections and fasteners

• Excellent lubrication

• Excellent corrosion protection

• Good solvent resistance

• High load carrying capacity

• Excellent adhesion to metal

• Low coefficient of friction

• High resistance to oil and fuels

• Solid lubricants

• Organic binder

• Solvents

Grey

1.2

42

-200 to +430

10

30/200

p=16000*

p=48000*

p=50000*

p = >500* (spraying / dipping)

p = >240* (dip - spinning)

Stir the Anti-friction Coating thoroughly before applying by

spraying, dipping, centrifuging or brushing. Recommended

dry film thickness: 5 to 20µm.

Tin: 500g

Container: 5kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 24 months

from the date of production.

61


Dry Film Film Lubricant Lubricant

Product

3402 C D 3484

Description

Applications

Air-curing dry lubricant.

• Excellent combination of corrosion protection and

lubrication

• Used on main axle threads of drill hammers, spindles

Heat-curing, anti-friction coating.

• Sliding contacts of metal/metal combinations with slow

to moderately fast movements and moderate to high

loads

• Used successfully for carburetor springs, lorry-coupling

sleeves, toothed gears and parts of car safety belts and

car-boot lock parts

• Bolts and levers in tractors and construction machines

Features

Composition

Typical Properties

Color

Physical properties

Density at 20°C

Viscosity at 20°C (DIN3 cup)

Viscosity at 20°C (DIN4 cup)

Non-volatile content

pH at 20°C

Temperature

Service temperature range

Curing time

Drying time at 20°C

Load-carrying capacity, wear protection,

service life

Falex load-carrying capacity

g/ml

s

s

%

°C

min./°C

min.

N

• Excellent corrosion protection

• Excellent lubricity

• Air-curing

• High load carrying capacity and wear resistance

• Solid lubricants

• Organic binder

• Corrosion inhibitor

• Solvent

Grey

1.08

47

34.5

-200 to +310

120/20

15

s=10700*

• Combines excellent lubricating effect with good

corrosion protection

• Fast curing, hence particularly suitable for series

production operations

• High load carrying capacity

• High abrasion resistance, hence long service life

• Solid lubricants

• Organic binders

• Solvents

Grey-black

1.11

18

35

-70 to +250

10/170, 5/200

b=12500*

LFW-1, rotating

F=680 N, n= 72 rpm, v=7.9 m/min

Number of revolutions x1000 to µ=0.1

LFW-1, rotating

F=2860N, n=72 rpm, v=7.9m/min.

No. of revolutions x1000 to µ=0.1

LFW-1, oscillating

F=900N, frequency=89.5osc/min.

No. of oscillations µ=0.08

Corrosion protection

Fretting corrosion - Deyber tester

Salt spray test

Resistance

Radiation resistance

Coefficient of friction

Screw test: Erichsen, µ thread

Screw test: Erichsen, µ head

Application method

Packages

Usable life and storage

h

rad

s=45*

s=25*

10 8

Stir the Anti-friction Coating thoroughly before applying by

spraying, dipping, centrifuging or brushing. Recommended

dry film thickness: 5 to 20µm.

Tin: 500g

Container: 5kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

b=298000*

p=126000*

s=149000*

b=90000*

p=245000*

s=306000*

18

Stir the Anti-friction Coating thoroughly before applying by

spraying, dipping, centrifuging or brushing. Recommended

dry film thickness: 5 to 20µm.

Tin: 500g

Container: 5kg, 50kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

62

* Surface pretreatment: b=blanc, p=phosphated, s=sandblasted


7400

Air-curing dry lubricant.

7405

Heat-curing dry lubricant.

7409

Heat-curing dry lubricant.

• Sliding contacts of metal/metal combinations with slow

to moderately fast movements and high loads

• Suitable for improving the running-in of gearboxes,

sliding bearings and sliding guides

• For running-in car transmission shafts, for the

maintenance-free, permanent, non-soiling lubrication of

threaded sleeves of car seat adjusting mechanisms, and

for the cold working of steel

• Free from flammable solvents

• Water-based, environmentally friendly

• High load_carrying capacity

• Low coefficient of friction

• Solid lubricants

• Inhibitor

• Organic binder

• Water

• Stabilizers

• For metal/metal and metal/plastic combinations with

slow to moderately fast movements and low to medium

loads

• Suitable for car door locks, small parts of cameras,

cylinder head bolts and self-tapping screws

• Avoidance of stick-slip

• Resistant to oil, grease and solvents

• Good corrosion protection

• Electrically insulating

• Low coefficient of friction

• Resistant to adhesion and abrasion

• Solid lubricants

• Organic binder

• Solvent

• Sliding contacts of metal/metal combinations with slow

to moderately fast movements and moderate to high

loads

• Suitable for oscillating movements or intermittent

operations. For improving the running-in process, for

permanent lubrication at high temperatures and also

where oils and greases cannot be used

• Used successfully for piston rings and tappets of

combustion engines, magnetic armatures of vehicle

starter motors, parts of vehicle brakes, locks, hinges

and pumps

• Corrosion protector for hydraulic and pneumatic parts

• Outstanding lubrication, coupled with corrosion

protection properties

• Resistant to oil, grease, solvents and many other

chemicals

• Avoidance of fretting corrosion

• Solid lubricants

• Organic binder

• Solvent

Dark grey

1.16

24

30

8

-70 to +200

5/90, 10/50, 40/23

15

Yellowish, transparent

1.04

-70 to +200

60/120

Greyish black

1.10

80

31

-70 to +380

30/220, 120/150

p=11300*

s=7900*

b=8000*

p=63*

s=14700*

p=343*

p=364*

p=76*

p=4*

p=214*

10x10 6

36x10 6

10 9

Stir the Anti-friction Coating thoroughly before applying by

spraying, dipping, centrifuging or brushing. Recommended

dry film thickness: 5 to 20µm.

Tin: 500g

Container: 5kg

When stored between -10°C and 40°C in the original

unopened containers, this product has a usable life of

12 months from the date of production.

0.13

0.09

Stir the Anti-friction Coating thoroughly before applying by

spraying, dipping, centrifuging or brushing. Recommended

dry film thickness: 5 to 20µm.

Tin: 500g

Container: 5kg

When stored at or below 23°C in the original unopened

containers , this product has a usable life of 60 months

from the date of production.

Stir the Anti-friction Coating thoroughly before applying by

spraying, dipping, centrifuging or brushing. Recommended

dry film thickness: 5 to 20µm.

Tin: 500g

Container: 5kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

63


Corrosion Protection Protection Product

Metal Protector Plus

Description

Applications

Corrosion protection coating.

• Corrosion protection for metal parts which have to be

stored or transported

Features

Composition

Typical Properties

Color

Physical properties

Density at 20°C

Flash point

Temperature

Service temperature range

Coefficient of friction

Press-Fit test µ=

Corrosion protection

Salt spray test

Application method

Packages

Usable life and storage

g/ml

°C

°C

h

• Long-term corrosion protection

• Transparent coating

• Low coefficient of friction

• Synthetic wax

• Corrosion inhibitor

• Solvent

• Contains white spirit

Transparent

0.84

28

0.12

510

Clean contact surfaces. Stir/shake thoroughly before

applying by spraying, dipping, centrifuging or brushing.

Recommended dry film thickness: minimum 5-20µm.

Aerosol: 400ml

Containers: 5kg, 20kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

64


Powder-Dry lubricants lubricants

Product

Microsize

Z

Description

Applications

Features

Composition

Molykote Microsize effectively lubricates metal surfaces of

all kinds in many difficult and extreme environments e.g.

metal/metal pairings at extreme loads and slow speeds or

metal/plastic pairings at low loads and low to medium

speeds.

• Coating of metallic friction contacts which cannot be

sufficiently lubricated with oil or grease due to high

loads, low speed or unfavorable environmental

influences

• For finely finished surfaces and highly alloyed steels with

dense structure Molykote Microsize Powders is the

preferred product. Incorporation as a friction reducing

additive in plastic elastomers and sintered metals

• Reduction of friction and wear

• Excellent adhesion on metal surfaces

• Extreme pressure resistance

• Resistant to oxidation

• Wide service temperature range

• Molybdenum disulphide

Molykote Z effectively lubricates metal surfaces of all kinds

in many difficult and extreme environments e.g.

metal/metal pairings at extreme loads and slow speeds or

metal/plastic pairings at low loads and low to medium

speeds.

• Coating of metallic friction contacts which cannot be

sufficiently lubricated with oil or grease due to high

loads, low speed or unfavorable environmental

influences

• Reduction of friction and wear

• Excellent adhesion on metal surfaces

• Extreme pressure resistance

• Resistant to oxidation

• Wide service temperature range

• Molybdenum disulphide

Typical Properties

Color

Temperature

Service temperature range

In hydrogen atmosphere

In vacuum

In inert gas (argon)

Density, viscosity

Density at 20°C

Load-carrying capacity, wear protection,

service life

Almen Wieland machine

OK load

Coefficient of friction

Press-fit test

Particle size (Fischer)

Application method

Packages

Usable life and storage

°C

°C

°C

°C

g/ml

N

µ

µm

Black

-185 to +450

up to +700

up to +1100

up to +1300

4.80

>20000

0.06

0.65-0.75

Burnish onto degreased, dry surfaces. Small parts can be

tumbled. For plastics, elastomers and sintered metals mix

into formulation before molding.

Tin: 1kg

Containers: 5kg, 25kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

Black

-185 to +450

up to +700

up to +1100

up to +1300

4.80

>20000

0.05, no chatter

3-4

Burnish onto degreased, dry surfaces. Small parts can be

tumbled. For plastics, elastomers and sintered metals mix

into formulation before molding.

Tin: 1kg

Containers: 5kg, 25kg, 50kg

Drum: 100kg

When stored at or below 20°C in the original unopened

containers, this product has a usable life of 60 months

from the date of production.

65

More magazines by this user
Similar magazines