Molykote(R) Thread Pastes (Asia Products)
Molykote(R) Thread Pastes (Asia Products)
Molykote(R) Thread Pastes (Asia Products)
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
TP 42 CU-7439 plus P 40<br />
Light-colored adhesive grease paste with solid lubricants<br />
for metallic friction combinations.<br />
• Sliding surfaces exposed to high pressure loadings and<br />
subject to the influence of water of metal machining<br />
emulsions<br />
• Recommended and successfully used by leading<br />
clamping-element manufacturers, especially for chucks<br />
on metal processing machines<br />
Copper paste for components subjected to high<br />
temperatures, high pressures and corrosive influences.<br />
• Well suited for all areas which need to be protected<br />
against water, steam and corrosion, e.g. brake<br />
mechanisms, flange seals, exhauster bolts<br />
Metal-free adhesive lubrication paste which can be used<br />
for all assembly and continuous lubricating jobs,<br />
particularly those exposed to corrosive environments such<br />
as splash water or humidity.<br />
• Assembly and threaded connections, spline shafts,<br />
mounting of bearings<br />
• Continuous lubrication: for various parts in brake<br />
systems, in brake rods, guide bolts. Axles of commercial<br />
vehicles, cams and plain bearings<br />
• Open Gears<br />
• Marine applications<br />
• High load-carrying capacity<br />
• Particularly adhesive<br />
• Particularly resistant to wash-out by water and metal<br />
machining emulsions<br />
• Prevents stick-slip<br />
• Good corrosion protection<br />
• Excellent protection against galling<br />
• Mineral oil<br />
• Synthetic oil<br />
• Lithium soap<br />
• Solid lubricants<br />
• Adhesion improver<br />
Light beige<br />
• Wide service temperature range<br />
• Good pressure resistance<br />
• Very adhesive and resistant against water wash-out<br />
• Good corrosion protection<br />
• Low evaporation<br />
• No drop point<br />
• Powdered copper<br />
• Partly synthetic oil<br />
• Inhibitor<br />
Copper colored<br />
• Excellent adhesion<br />
• Good corrosion protection<br />
• Good water resistance<br />
• Good antifretting<br />
• Assembly and continuous lubrication<br />
• Metal-free<br />
• Low water pollution class<br />
Dark green<br />
265-300<br />
1.19<br />
-25 to +250<br />
125<br />
-20<br />
224x10 -3<br />
59x10 -3<br />
740<br />
320-370<br />
1.0<br />
1100<br />
-30 to +650; as a paste up to +300<br />
None<br />
310-350<br />
900<br />
-40 to +230 as paste; -40 to +1200 as solid lubricant<br />
None<br />
960<br />
4<br />
3000<br />
0.9<br />
20000<br />
1710<br />
0.09<br />
2500<br />
1.0<br />
>20000<br />
0.07<br />
0.17<br />
0.10<br />
110<br />
3000<br />
0.94<br />
0.12<br />
0.16<br />
0.08<br />
2-90<br />
1-90<br />
0.13<br />
0-1<br />
0<br />
0<br />
25 x10 6<br />
500<br />
1.5<br />
By brush, cloth or grease gun.<br />
Do not mix with other greases or pastes.<br />
Tube: 100g<br />
Cartridge: 500g<br />
Tin: 1kg<br />
Container: 25kg<br />
When stored at or below 20°C in the original unopened<br />
containers, this product has a usable life of 60 months<br />
from the date of production.<br />
Contact surfaces should be cleaned. Then apply paste with<br />
a brush or cloth. Excess lubricant need not be removed.<br />
Can be used in grease guns and centralized lubrication<br />
systems. For disk brakes treat only the rear of the brake<br />
block. Do not mix with other greases or pastes.<br />
Aerosol: 400ml<br />
Tube: 100g<br />
Tins: 500g, 1kg<br />
Containers: 5kg, 25kg<br />
When stored at or below 20°C in the original unopened<br />
containers, this product has a usable life of 60 months<br />
from the date of production.<br />
The sliding surfaces should be cleaned. The paste should<br />
then be applied with a suitable brush, rag or grease gun.<br />
It should not be mixed with greases or oils.<br />
Aerosol: 400ml<br />
Tin: 1kg<br />
Containers: 5kg, 25kg<br />
When stored at or below 20°C in the original unopened<br />
containers, this product has a usable life of 60 months<br />
from the date of production. Do not mix with other greases<br />
or pastes.<br />
21