Windows sysinternals

376 Part II Usage Guide
adjacent if an operation completes asynchronously and also that columns are separated by
two spaces, not by tabs. Here is an example of data written to a Portmon log file:
0 0.00000000 spoolsv.exe IRP_MJ_CREATE Serial1 Options: OpenIf Sequential
0 0.00065288 SUCCESS
1 0.00000000 spoolsv.exe IRP_MJ_SET_INFORMATION Serial1 -1699359072
1 0.00000587 SUCCESS
2 0.00000000 spoolsv.exe IRP_MJ_SET_INFORMATION Serial1 -1699359044
2 0.00000223 SUCCESS
3 0.00000000 spoolsv.exe IOCTL_SERIAL_GET_BAUD_RATE Serial1
3 0.00000615 SUCCESS
4 0.00000000 spoolsv.exe IOCTL_SERIAL_GET_LINE_CONTROL Serial1
4 0.00000279 SUCCESS
Choose Print or Print Range from the File menu to print the captured data to a printer.
Choose Print Range if you want to print only a subset of the sequence numbers displayed, or
choose Print if you want to print all the output records. Note that capture must be disabled
prior to printing.
The Print Range dialog box (shown in Figure 13-7) also lets you specify whether or not data
from the sequence number and Time columns will be included in the output. Omitting these
fields can save page space if they are not necessary. The settings you choose are used in all
subsequent print operations.
FIGURE 13-7 The Portmon Print Range dialog box.
To prevent wrap-around when output lines are wider than a page, consider using landscape
mode instead of portrait when printing.
www.it-ebooks.info