Print Station Operator's Guide - Kodak

Chapter 2. Operator Controls
Status Screens
Table 2.3
System status and measurement entries (Continued)
Parameter/
Component Possible Statuses Range in Ready Description
Charge plate heater On - Status of the heater that prevents ink
condensation.
Printhead ink/ambient
temperature
Charge voltage
Ink concentration
Ink level
- 15 to 45 C Ink's temperature and the air temperature in the
printhead.
On
50.0 to 150.0 VDC Voltage on the charge plate.
Low
OK
Low
High
OK
Low
Empty
Filling
High
Not applicable
Not applicable
Darkness of the ink. Replenisher is added as
necessary. A constant low or high state may
indicate a problem.
Amount of ink in the ink tank. Ink is added as
necessary. A constant empty, filling, or high
state may indicate a problem. 1
Printhead use - 0 to 65000 h Accumulated hours the printhead has operated.
Print station use - 0 to 65000 h Accumulated hours the print station has
operated. 2
1. If the OK is displayed as light blue text, the print station ink tank will draw from the external ink supply at the next fill. If the OK is
displayed as dark blue text, the print station ink tank will draw from the external replenisher supply at the next fill.
2. If the INSTALL command is used when updating/installing operating software, the accumulated hours will be reset to 0 (zero). If the
UPDATE option is selected, the accumulated hours are not affected.
Operator’s Guide 2 - 9