AT Commands Set

SIM5320 AT Command Set
Write command informs TA which character set is used by the TE. TA is then able to
convert character strings correctly between TE and MT character sets.
Read command shows current setting and test command displays conversion schemes implemented
in the TA.
SIM PIN
References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CSCS=?
Read Command
AT+CSCS?
Write Command
AT+CSCS=
Execution Command
AT+CSCS
Responses
+CSCS: (list of supported s)
OK
Responses
+CSCS:
OK
Responses
OK
ERROR
Responses
Set subparameters as default value:
OK
Defined values
Character set, the definition as following:
“IRA” International reference alphabet.
“GSM” GSM default alphabet; this setting causes easily software flow control (XON
/XOFF) problems.
“UCS2” 16-bit universal multiple-octet coded character set; UCS2 character strings are
converted to hexadecimal numbers from 0000 to FFFF.
Examples
AT+CSCS=”IRA”
OK
AT+CSCS?
+CSCS:”IRA”
OK
SIM5320_ATC_V1.24 31
8/14/2012