Simrad Autopilot, Gyro Compass and Heading Sensor ... - ProNav

PROFESSIONAL SERIES 

Simrad Autopilot, Gyro Compass and 

Heading Sensor Solutions 

WWW.SIMRAD-YACHTING.COM/PROFESSIONAL

2 

Simrad Professional Autosteering and Gyro Compasses 

SIMRAD PROFESSIONAL 

The Simrad Professional portfolio offers a comprehensive range of marine electronic products spanning instruments, autosteering, 

gyro compasses, navigation systems, radar, communications and safety. Simrad Professional products are synonymous with 

sophistication and rugged reliability, providing tried and trusted solutions for a wide range of professional applications. With more 

than 60 years experience of developing quality products, Simrad are well positioned to meet the needs of today’s professional 

mariners. 

SIMRAD PROFESSIONAL AUTOSTEERING AND GYRO COMPASSES 

Simrad autopilots are developed to provide commercial vessels, large yachts and megayachts with the highest standards of reliability 

and the functionality needed in a professional environment. 

The Simrad Gyro Compasses are the most reliable Gyro Compasses on the market and with no liquids to change every other year 

like most other gyro compasses, they are virtually maintenance free. 

Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions

AP35 Autopilot 

3 

Solid, rugged and simple to operate with a dedicated WORK mode. 

Simrad AP35 Autopilot is developed with the particular needs of the professional 

mariner in mind. Fishing vessels will find a perfect partner in the AP35. The control 

unit is made of solid marine grade aluminum, and the AP35 presents you with 

features mentioned. Reliability is what counts after all. A full selection of remote 

controls and steering levers is available. 


AP35 Key Features 

Simple operation 

Reliability 

Dedicated WORK mode 

Multistation capability 

Interfaces to: Magnetic, fluxgate or gyrocompass 

Optional Rate Compass 

Radar Heading Interface 

Simple operation with dedicated push buttons 

and the innovative QS50 Quickstick operation 

AP35 BASIC System 


Part Number 

RC25 Rate 

Compass 

Description 

J3XX 

Junction Unit 

000-10117-001 AP35 Pack 1 (AP35, J3000X, RF300, without 

heading sensor) 

RF300 Rudder 

Feedback 

000-10118-001 AP35 Pack 2 (AP35, J300X, RF300, RC25) 

000-10119-001 AP35 Pack 3 (AP35, J300X-40, RF300, RC25) 

TYPICAL SIMRAD PROFESSIONAL aP35 SYSTEM 

RC25 Rate 


AP35 Remote 

Control Unit 

QS50 

AP35 Control Unit 

NSE GPS/ 

Chartplotter 

RGC50 

Gyro Compass 

Boats Magnetic 


RI35 MK2 

Rudder Angle 

Indicator 

S35 NFU 

Lever 

FU50 

Lever 

JS10 

Lever 

R3000X 

Remote 

Control 

MX575A DGPS 


RFC35 Fluxgate 


GI51 Gyro 

Interface 

CDI35 

Interface 

J3XX 

Reversible 

Pump 

Solenoid 

Valve 

NMEA Heading Sensor 

RF300 

Rudder 

Feedback 

RF45X 

Rudder 

Feedback 

System Components 

System Variables 

System Expansion 

Basic System 


4 


The Simrad AP50 offers the ultimate in autopilot performance 

for vessels over 50 feet. More than 60 years of experience and 

development is embedded in the most comprehensive of all pilot system 

packages. It offers a wide range of controls, displays and interfaces 

to build up a complete bridge steering system suitable for commercial 

craft, super and mega yachts, power and sailboats. You will find all the 

features you would expect from a true commercial pedigree. 

The steering algorithms in the AP50 is the result of over 60 years of 

steering experience. The special Auto Heading Capture is based on 

experience with the offshore market. The AP50 will provide precise 


steering, using the least amount of rudder movements necessary. 

Save fuel and wear on the steering-gear with the Adaptive Sea state 

Filter, Automatic rudder offset, Adaptive rudder deadband, Adaptive speed response, Second compass for course monitoring and 

Adaptive pump speed. 

The WORK mode of Simrad autopilots has been taken to an even higher level in the AP50 autopilot. The Auto Work mode 

is an automatic steering mode to be used under operational conditions, different from those normally found when a vessel is 

in normal transit on a pre-set course. Examples are trawling, towing, being towed, trolling on one engine, slow speed etc. As 

GPS Chartplotters and Electronic Charting Systems (ECS) have become standard equipment on most vessels today, this Work 

feature has now been implemented in the AP50 navigation mode resulting in a Nav Work mode. Combined with a bow-thruster, 

navigational steering is now possible at low speeds previously considered unsuitable for autopilot use. 

AP50 Key Features 

Excellent steering performance 



Two complete sets of preprogrammable 

steering parameters 

Multiple combination of dual compass 

Thruster control for improved low speed manoeuvring 

Wheelmark approved including HSC, US 

coastguard approved 

Part Number 

Description 

000-10122-001 AP50 Pack 1 (AP50, J50, RF300, RC25) 

000-10121-001 AP50 Pack 2 (AP50, J50, RF45X, without 


000-10120-001 AP50 Pack 3 (AP50, J50, RF300, without 


AP50 BASIC System 

GC80 / GC85 



RF45X Rudder 

Feedback 

J50 / J50-40 

Junction Unit 


TYPICAL SIMRAD PROFESSIONAL aP50 SYSTEM 

5 

CS66 ECS / 

CS68 ECDIS GI51 NI300X RC25 AP50 AP50 AP51 QS50 

FU50 

IS70 Rudder / 

IS80 Rudder 

Robnet 

Radar 

CLK/Data 

RI35 MK2 

MX575A DGPS 


Ext. Alarm 

Mains 

J50/J50- 

40 

TI51 

AD50 

GPS/Chartplotter 

(NSE, NX...) 


GC80/GC85 

S35 

JS10 

R3000X 

S9 

Panorama 

MK2 

Non Simrad 


NMEA Data 



Reversible 

Pump 

Solenoid 

Valve 

CD100A 

CDI35 

2-wire freq. 

2-wire freq. 

RF300 RF45X RF14XU 

U 

C 

Popular Simrad features like 

U-turn and C-turn 

Use the QuickStick to maneuver 

from the dock or mooring, point 

and push the stick forward, and 

head for your destination 

The QS50 will, by a single press on 

a button, also engage the thruster. 

You can activate both rudder and 

thruster or thruster only 


6 

AP50 Plus Autopilot 

With the new range of distribution units, the AP50 Plus can interface with almost any magnetic compass, gyrocompass, steering 

gear and navigation receiver. The new system is Wheelmark approved for commercial vessels including HSC. 

AP50 Plus has been designed to produce very accurate steering under autopilot control. The autopilot has been programmed to 

learn how the rudder responds to commands. This both reduces rudder activity and ensures that the rudder is positioned exactly 

as required, so eliminating rudder overshoot. It also compensates for wear and play in the steering gear, which can be of particular 

importance when using AP50 Plus as a retrofit autopilot. Precise course keeping is guaranteed due to the ability to set all 

parameters on the AP50 Plus individually with a high level of fine tuning. 

The AP50 Plus can be built up as a part of a complete steering system 

for all types of vessels. A combination of steering levers, rudder angle 

indicators and gyro repeaters can be used to create an integrated steering 

station on the bridge. 

As an optional feature, the AP50 Plus can be configured to control a bow 

thruster. Rudders are inefficient at the slow speeds often required by 

dredgers and survey vessels. A vessel can, however, maintain an accurate 

heading by automatic control of a bow thruster through the AP50 Plus 

autopilot. 


The configuration possibilities of Simrad autopilots, made by the selection 

of specific modules, will cover all applications, from small inshore fishing boats to large ferries and survey ships. Flexibility in 

system choice covers all retrofit applications. 

The AP50Plus can be built up as a part of a complete steering system for all types of vessels. A conmbination of steering levers, 

rudder angle indicators and gyro repeaters can be used to create an integrated steering station on the bridge. 

The AP51 portable remote control may simply be plugged in to the network and it is ready to use. The remote will provide total 

portable control over the autopilot system including direct thruster control. 

With the QuickStick TM connected, the autopilot performance and functionality can be greatly enhanced. Features and benefits are 

easily available without having to be within reach of the AP50 main station. 

AP50 plus Key Features 

Excellent steering performance 



Two complete sets of preprogrammable 

steering parameters 

Multiple combination of dual compass 

Interface to virtually any type of steering gear 

Thruster control for improved low speed manoeuvring 

Ruggedized Autopilot computer 

Dual galvanic isolated analog output 

Dual galvanic isolated solid state 

19-40V DC / 110V DC / 110/220V AC output 

Wheelmark approved including HSC.US coastguard 

approved 

Part Number 

Description 

000-10123-001 AP50+ Pack (AP50, JD53, without heading 

sensor) 

AP50 PLUS BASIC System 

GC80 / GC85 


AP50 

JD5X Junction Unit 

OR 

RF45X Rudder 

Feedback 

RF14XU 

Rudder Feedback 


7 

TYPICAL SIMRAD PROFESSIONAL AP50 PLUS SYSTEM 

CS66 ECS / 

CS68 ECDIS 

GI51 NI300X 

AP50 AP50 AP51 QS50 

FU50 

IS70 Rudder / 

IS80 Rudder 

Robnet 

RI35 MK2 

GPS/Chartplotter 

(NSE, NX...) 

MX575A DGPS 


System Select 

Radar CLK/Data 

Ext. Alarm 

24 VDC Mains 


GC80/GC85 

JD5X 

TI51 

S35 

JS10 

R3000X 

S9 

Panorama 

MK2 

Non Simrad 




NMEA Data 

Steering gear 1 

Electronics 

Steering gear 2 

Electronics 

CD100A 

CDI35 

2-wire freq. 

2-wire freq. 

RF45X 

RF14XU 

Distribution units for steering gears: 

JD50 

JD51 

JD52 

JD53 

Solid state switching of 2 independent 

sets of directional valve solenoids. 

19-40V DC, 3A 

110V DC, 1A 

110/220V AC, 1A 

Two galvanic isolated output control 

signals of +/- 10V DC, 4-20 mA or a 

control signal that can be adjusted within a 

certain range of an input reference voltage. 


8 

Remotes 

qs50 remote control unit 

With the QuickStick TM connected, the autopilot performance and functionality can be greatly enhanced. 

Features and benefits are easily available without having to be within reach of the AP50 main station. 

• NFU steering with automatic Centring of rudder 

• Rudder and thruster control 

• Mode selection 

• Course change 

• Heading capture 

• Status LEDs 

Status LEDs adapted to day and night vision monitor the operation and flash a warning if particular attention 

is required. QuickStick is weather and water proof for outdoor operation. 

QS50 

Remote Control 

Part Number 

Description 

22089494 QS50 Controller: 2-axis joystick for armrest and 

flush mounting. Mode change (except into Nav), 

NFU with quick rudder center function, and course 

change in Auto mode. Note: QS50 does not provide 

FU steering 

AP51 Remote control 

The AP51 portable remote control may simply be plugged into the network and it is ready to 

use. The remote will provide total portable control over the autopilot system including direct 

thruster control. 

WHEELMARK APPROVED FOR AP50 AND AP50 PLUS SYSTEMS 

Part Number Description 

20214052 AP51 Remote Control: With standard mounting kit 

AP51 

Remote Control 

S35 steering control 

NFU steering lever. Two sets of micro switches. Illuminated mode button provides power steering or course 

change. Outdoor mounting; IP56 (splash proof) protection. 


Part Number 

Description 

23241227 S35 Non Follow Up Steering Lever: Spring loaded. 

Designed for indoor/outdoor mounting. Illuminated 

mode button. 

S35 

Steering Control 

s9 steering control 

NFU Steering lever. For indoor/outdoor, panel/bulkhead mounting. Can operate solenoids directly. Facility 

for priority steering and mode change on AP50 autopilots. Lever mid-position has lock mechanism. 


Part Number 

Description 

23601800 S9 Steering Lever (NFU): Indoor/outdoor panel 

bulkhead mounting. Can operate solenoids directly. 

Facility to change mode on autopilot. 

S9 

Steering Control 


9 

FU50 follow-up STEERING lever 

The FU50 Follow-up steering lever features a unique non linear dial (scale) to allow precise rudder 

control around rudder mid position, with 5° rudder angle markings. The rudder will move and stop at the 

angle selected on the dial. The FU50 has a mid-position indent, buttons for (limited) mode selection, and 

mode indicators (STBY, FU, AUTO, NAV, WORK, and THRUSTER). It is designed for indoor and outdoor 

bulkhead- or panelmounting. 


Part Number 

Description 

20214037 FU50 Follow Up Steering Lever; with mode buttons 

for FU, STBY and AUTO for indoor/outdoor 

mounting. Illuminated mode indicators. For use with 

AP35 and AP50 only. 

20214375 FU50 Flush Mount Kit NEW: For use with the 

upgraded FU50 steering levers. Fits FU50 rev EA 

and higher. 144mm x 144mm aluminum matches 

size of RI9. 

FU50 Follow-up 

Steering Lever 

RI35 Mk2 

The RI35 Mk2 Rudder Angle Indicator gives a continuous reading of the rudder position up to 45 degrees on either side of the 

amidships position.Designed to operate from frequency or current input signals, generated by a Simrad autopilot feedback unit, the 

RI35 Mk2 will also accept a NMEA 0183 rudder angle (RSA) signal. 

Manufactured in noncorrosive aluminium with a nonreflective black finish, the instrument is a standard 

modular size (132 x108 mm) to match the Simrad AP35 autopilot. A front panel key is used for 

illumination and setup. The splash proof construction allows panel, bulkhead or bracket mounting in 

exposed locations, such as bridge wings as well as wheel house and engine room. 


Part Number 

Description 

22085146 RI35 MkII Rudder Indicator. RI35MK2 Rudder Angle 

Indicator; Designed for indoor/outdoor mounting. 

Operates with RF300, or RF45X feedback units. 

Maximum of four units if operated on frequency; two 

units if operating on current. 

RI35 Mk2 Rudder 

Angle Indicator 

Panorama RAI (RUDDER ANGLE INDICATOR) 

The Panorama Mk2 Rudder Angle Indicator is designed for overhead mounting on the bridge. The splash proof ABS/PC blend 

cabinet contains 3 identical scales, for accurate reading of rudder angles from any position in the wheel-house. The indicator is 

designed for rudder angles up to 45 degrees on either side of midship position. 

Part Number 

Description 

22060966 Panorama U45 Rudder Indicator. Panorama 

Mk2 (45°-0-45°). 3-way indicator. For overhead 

mounting. Adjustable dial light. 24 V. “U” version for 

voltage input. Works with RF14XU only 

Panorama U45 

Rudder Angle Indicator 


10 

Drive Units 

RPU80, RPU160 and RPU300 REVERSIBLE PUMP 

Hydraulic steering systems are now being used in every category of vessel. In many respects hydraulic steering is preferable to 

mechanical steering. Hydraulic systems normally comprise of two main components, a steering wheel pump and steering cylinder(s). 

The steering wheel pump may be either a gear pump or a plunger pump. Which ever type is installed, steering is achieved by turning the 

steering wheel in either direction causing oil from the wheel pump to be supplied to the appropriate side of the cylinder. Oil is returned 

via the opposite side of the cylinder back to the pump. 

The linear motion of the cylinder rod is transformed to a rotary motion by the tiller, which turns the rudder shaft and rudder. Check valves 

(non-return valves) are usually incorporated to prevent the rudder driving the steering wheel pump. If an autopilot is to be included in 

such a hydraulic steering system, then the oil flow providing the rudder movement must be controlled by electrical signals from the 

autopilot. The maximum flow rate of RPU80, RPU160 and RPU300 is 0,8 l/min., 1,6 l/min. and 3,0 l/min. respectively, measured at a 

pressure of 10 bar with nominal voltage (12 VDC) on the motor terminals. 

Rpu80 reversible pump 

Part Number 

Description 

21116165 RPU-80: Reversible Pump for cylinder size 80 - 200 

cu.cm. (4,9 – 12,2 cu.in.) 

RPU80 


Part Number 

Description 

21118203 RPU-160: Reversible Pump for cylinder size 160 - 

400 cu.cm. (9,8 – 24,4 cu.in.) 

RPU160 


Part Number 

Description 

21118211 RPU300-12 V: Reversible Pump. For cylinder size 

320 – 740 cu.cm. (19,5 – 45,2 cu.in.) 

21118476 RPU300-24 V DC: Reversible Pump. For cylinder 

size 320 – 740 cu.cm. (19,5 – 45,2 cu.in.) 

Rudder Feedback Units 

RPU300 

RF14XU RUDDER FEEDBACK UNIT 

The rudder feedback unit transmits a signal proportional to the rudder angle. It is mounted close to the 

rudder stock and is mechanically connected to the rudder by a transmission link in a 1:1 ratio. 

The RF14XU Rudder Feedback Unit consists of a glass reinforced non-flammable polyester housing 

with a mounting plate of sea-water resistant aluminium. It contains a potentiometer, limit switches and an 

electronic drive module. 

Output is either a voltage varying ±9 volts around half the supply voltage, or a frequency signal with 3400 

RF14XU 

Hz for use with a Simrad autopilot. The shaft of the Feedback Unit is free to travel 360 degrees, but only 

±90 degrees from midposition are used for signal control. RF14XU is equipped 

with two sets of micro switches, which can be used as electrical limit switches for 

the steering gear. 

Rudder Indicator Compatibility 

Rudder Feedback IS80/IS70 RI35 Mk2 Panorama 


Unit 

Rudder 

22506950 RF14XU Heavy Duty Feedback Unit; Long life 

RF14XU 

• • • 

feedback unit with transmission linkage. Separate 

output for rudder angle indicators. Double set of 

RF45X 

• 

limit switches. Requires 24VDC supply voltage. 

RF300 

• 


RF45X RUDDER FEEDBACK UNIT 

The RF45X is a medium duty rudder feedback unit. It is a repairable rather than a potted “throw 

away” item. The RF45X has “universal” frequency output which can be used with both AP35 and 

AP50, and the older AP45 and AP9 without the use of internal jumpers. 

11 

Part Number 

Description 

22011415 RF45X Rugged rudder Feedback Unit; with 

transmission link and 2m Cable. 

RF45X 

RF300 Rudder Feedback 

The RF300 is a medium duty rudder feedback unit which connects directly to the Autopilot 

Pilot Computer using 2 wire frequency interface. 

Part Number 

Description 

20193744 RF300 Rudder Feedback Unit: with transmission 

link and 10m Cable. 

RF300 Rudder Feedback 

Heading Sensors 

CD100A course detector 

Magnetic compass course detector to be mounted under the boats own compass. Used together with CD135. 

Part Number 

Description 

20106688 CD100A Course Detector; with 5m. Cable. Magnetic 

course detector with tripod holder for overhead and for 

conventional magnetic compass. 

CDI35 dedicated magnetic compass interface unit 

The CDI35 is used with CD100A only. It converts the Sine/cosine signal from CD100A into a two-wire pwm signal, similar to the 

RFC35 Compass. Also used with AP35. 

Part Number 

Description 

22087001 CDI35 Course detector interface. Interface unit to 

connect autopilot to magnetic compass with CD100A 

or CD109 course detector. 

RC25 rate compass 

The Simrad RC25 Rate Compass is used with AP35 and AP50 (Robnet). Fluxgate compass with 

integrated rate of turn sensor. Utilizes a solid state rate sensor and a magnetic fluxgate sensor. Provides a 

dramatic improvement to the dynamic performance of both the autopilot and a stabilized radar display. 

Part Number 

Description 

22084438 RC25 Rate compass; High performance fluxgate 

compass with integrated rate gyro provides more 

stable heading, with 15 m cable 

RC25 

RFC35 fluxgate compass 

Simrad RFC35 Fluxgate Compass can be used with AP35 and AP50 (Two wire pwm) 

Part Number 

Description 

22086995 RFC35 Electronic fluxgate compass; with 15 m cable 

RFC35 


12 

GC80 and GC85 Gyrocompasses 

The Simrad Gyro Compasses are the most reliable Gyro 

Compasses on the market and with no liquids to change every 

other year like most other gyro compasses, they are virtually 

maintenance free. A wide range of control units provide complete 

flexibility of system configuration for new installation and easy 

retrofit into existing repeater systems. The standard range of 

interfaces can easily be expanded to provide signals for all vessel 

applications. The distribution of power and heading signals from 

the control units enables practical installation and easy retrofit. 

The unique technology in the GC85 and GC80 gyrocompasses 

eliminates “practically” the need for annual service. The GC85 and 

GC80 are fully IMO approved for standard and High Speed Craft 

(GC85) and can be configured in a dual gyrocompass system. 

The highest possible accuracy and stability is provided from new 

technology, by sophisticated and fully sealed sensitive element. 

GC80, GC85 and RGC50 Gyrocompasses 

The Simrad GC85 and GC80 gyrocompasses are the ideal 

solutions for the advanced DP system needed in offshore industry. Shipowners as well as DP system providers all over the world 

have learned that the Simrad GC series gyrocompass offers the most flexible gyro compass solution on the market. A combination 

of a Dual- and an Expanded system, consisting of all together three gyro compasses will offer a DP vessel all the heading and 

control information needed for effective operations under the most harsh conditions. The simple and quick installation and set-up 

process as well as the fact that no annual service is required makes a Simrad gyro system the best solution for any 24/7 operator. 

The world wide service and warranty network ensures extra support whenever needed. 

gc80 and gc85 Key Features 

Unique, new technology, sensitive elements require no 

annual servicing 

Very low RPM reduces wear and increases lifetime 

Swappable sensitive elements for onboard service 

No oil change and quick installation 

Sealed sensitive element 

High follow-up rate 

Full 2 year warranty 

GC80 approved according to IMO A.424(XI) performance 

standards for gyro-compasses 

GC85 approved according to IMO A821(19) performance 

standards for gyro-compasses for high speed craft 

Part Number 

Description 

27101617 GC80 Compact Gyro system 

GC80 Exp Sys 

GC80 Dual Sys 

GC85 Comp Sys 

GC85 Exp Sys 

GC80 Expanded Gyro System 

GC80 Dual Gyro System with changeover switch 

GC85 Compact Gyro System 

GC85 Expanded Gyro System 

27102169 Second GC80 Master Compass and GC80 

Sensitive Element 

27102177 Second GC85 Master compass including sensitive 

element 

Control Units 

Compact EXpanded Dual 

GC85 Gyrocompass 


GC80/85 basic System 

HR80 Heading 

Repeater 

AR81 Bearing 

Repeater 

13 

UP 

SimNet 

SimNet 

AT10HD Converter 

White Rx+, A 

Brown Rx-, B 

Yellow Tx+, A 

Green Tx-, B 

From NMEA 

"Talker" 

To NMEA 

"Listener" 

GC80 / 85 


Control Unit 

SimNet 

NMEA 0183 

Part Number 

Description 

24005936 AT10 Two way general NMEA 0183 to SimNet 

converter 

27107523 HR80 Heading repeater 

Repeater 

AR81 bearing repeater 

A full range of analog and digital repeaters are available for all vessel applications. Analog, digital and bearing 

repeaters can be used with all Simrad gyrocompasses. All repeaters are water resistant for external use. 

Part Number 

Description 

27101732 AR81 Single scale Bearing Repeater NMEA. 

To be mounted in BB holder, MB Holder or BH 

stand. IMO A424. 

Wheelmark approved for GC80/ 85 gyro systems 

RGC50 Compact Gyrocompass 

AR81 Bearing 

Repeater 

The small, compact ”all in one” RGC50 Gyrocompass is designed for smaller vessels and non- 

IMO applications. 

The RGC50 is a compact gyrocompass, designed to enhance the navigation capabilities on 

small commercial, fishing vessels, and large pleasure yachts. A gyrocompass eliminates the 

inconvenience and limitations of magnetic compasses, and provides a variety of electrical 

outputs to supply accurate and consistent heading information to other navigation equipment. 

The capabilities and precision of the RGC50 will provide exceptional heading information to the 

navigation equipment installed on your vessel. 

Part Number 

Description 

27102185 RGC50 Gyrocompass for small vessels. Built in 

timer. 

RGC50 Compact Gyrocompass 

000-10124-001 RGC50 Pack (RGC50, GI51) 


14 

MX575A DGPS Compass 

The MX575A D/GPS compass is designed to provide the 

Simrad Professional Autopilots, MX5XX Series navigation 

and AIS systems with reliable heading, ROT (Rate of Turn) 

and position information. The MX575A delivers a heading 

accuracy of better than 0.5° at update rates of up to 10 

Hz. It also provides sub-meter DGPS positioning accuracy 

at rates of up to 5 Hz when using RTCM correction data 

supplied from internal beacon demodulator. 


To augment the GPS-derived heading, the MX575A 

includes other supplemental devices. The combination 

of inclinometer and magnetic sensing devices aid the rate at which a heading solution is computed on startup and also speeds 

up reacquisition. A rate gyro provides a secondary source of heading data in times when the GPS heading is not available due to 

temporary obstructions. These sensors improve performance and increase dependability of the MX575A. The MX575A features 

two independent RS-232 serial ports and one RS-422 port. Either RS-232 port may be configured freely for a variety of NMEA 

0183 output sentences or for the input of RTCM correction data from an external source. The output of the RS-422 port mirrors 

that of one RS-232 port. It also features COAST technology that allows it to use old correction data for up to 40 minutes without 

seriously affecting positioning performance. This feature offers peace of mind and allows you to focus on more important issues 

than reliability of a differential signal. 

MX575A Key Features 

Type-Approved as a Transmitting Heading Device (THD) 

and a Primary Positioning Device 

Compatible with MX5XX family of CDUs 

Stand-alone automatic operation 

Heading accuracy of 0.5° 

Heading updates up to 10 Hz 

Integrated DGPS sources including WAAS, EGNOS, and 

Beacon 

Sub-meter DGPS accuracy 

Fast start-up times 

Sustained tracking during Rates of Turn up to 90º/s 

Sealed enclosure with IP 67 rating 

NMEA 0183 V3.0 interface with provision for 

external RTCM SC-104 corrections 


9525-200-80900 MX575A DGPS Compass with 15M Cable 

MX575A basic System 

MX500 / 510 Head Unit 

AT10HD Converter 

UP 

SimNet 

SimNet 

White Rx+, A 

Brown Rx-, B 

Yellow Tx+, A 

Green Tx-, B 

From NMEA 

"Talker" 

To NMEA 

"Listener" 


MX500 / 510 

Junction Box 

SimNet 

NMEA 0183 


Technical Specifications 

15 

ap35, ap50 and ap50 plus sPECIFICATIONS 

AP35 AP50 AP50 

Plus 

Multi-language display • • • 

Transflective matrix LCD 70x29mm 102x83mm 102x83mm 

Analog presentation • • 

Rudder angle bargraph • • • 

Adjustable backlight • • • 

Dedicated mode keys • • • 

Course change, rotary knob • • • 

Course change keys, 

±1/5/10°Dedicated/Selectable 

Dedicated 1° Selectable 1°, 

5 ° or 10° 

Heading capture in turns • • 

Rate/radius turn control • • 

Work mode • • • 

DODGE, resume of previous heading • • • 

U-turn, C-turn • • • 

NFU/FU Power steering • • • 

Automatic tuning (Autotune) • • • 

Seastate and parameter speed control 

(Automatic/Manual) 

Rudder deadband adjust (Adaptive/ 

Manual) 

A/M A/M A/M 

A A/M A/M 

Rudder angle calibration • • • 

Multiple stations • • • 

Remote station lock • • • 

Master station operation • • 

Solenoid or reversible motor control 

interface 

Galvanic isolated solenoid or analog 

control (AD50) interface 

Dual galvanic isolated solenoid or 

analog control interface 

• • • 

Thruster Control (TI51) • • 

Multiple compass input • • • 

Multiple NMEA 0183 input/output • • • 

System selector interface (manual/ 

automatic steering) 

• 

• • 

Off course alarm • • • 

Compass difference alarm • • 

System monitoring alarms • • • 

Remote alarm station interface 

option (NAUT-OSV class) 

IMO - High Speed - Wheelmark - 

USCG approved 

• • 

• • 

Selectable 1°, 

5 ° or 10° 

• 

108 mm (4.2") 

144 mm (5.7”) 

ap35 

216 mm (8.5") 

87 mm (3.4") 

36mm (1.4") 

ap50 

252 mm (9.9”) 

37 mm (1.5”) 

57.5 mm (2.3”) 

152 mm (6.0”) 

25.5 mm (1.0”) 


16 

ap35 compatible accessories 

Part Number 

Description 

22085112 J3000X Junction unit: One NMEA0183 input and output port. Heading out at 4 Hz. Controls reversible drive 

units and solenoid activated steering systems drawing up to 6 A. (continuous load) 12 or 24 V DC only 

22085120 J300X Junction unit: Two NMEA0183 input and output ports. Supplies 10 Hz. heading output from Tx. port 

2. Radar clock/data interface. External alarm. Controls reversible drive units and solenoid activated steering 

systems drawing up to 10 A. (continuous load) 12/24/32 V DC 

22085138 J300X-40 Junction unit: Two NMEA0183 input and output ports. Supplies 10 Hz. heading output from Tx. port 

2. Radar clock/data interface. External alarm. Controls reversible drive units and solenoid activated steering 

systems drawing up to 20 A. (continuous load) 12/24/32 V DC 

22084438 RC25 Rate compass; High performance fluxgate compass with integrated rate gyro provides more stable 

heading, with 15 m cable 

22086995 RFC35 Electronic fluxgate compass; with 15 m cable 

22087001 CDI35 Course detector interface. Interface unit to connect autopilot to magnetic compass with CD100A or 

CD109 course detector. 

20106688 CD100A Course Detector; with 5m. Cable. Magnetic course detector with tripod holder for overhead and for 

conventional magnetic compass. 

9525-200-80900 MX575A DGPS Compass with 15M Cable 

Parts included: 

MX575A DGPS Compass Sensor 

MX575A Power/Data 15m Cable 

MX575A Manual 

MX575A Pole Mount 

MX575A Fixed Mount 

MX575A Mounting Kit 

27102185 RGC50 Gyrocompass for small vessels. Built in timer. Including RGC50 Master compass and RGC50 Sensitive 

element 

20213773 GI51 Gyro Interface; Mains 12-40VDC. Input – synchro (1:1 and geared), 20 – 70 VDC step signal, and 

NMEA0183. Outputs – NMEA0183 (per source- HDT, HDG, ROT). Simrad clock data, 24VDC step, sine/cosine 

(2.5VDC reference). 

20193744 RF300 Rudder feedback unit: with transmission link and 10 m cable 

22011415 RF45X Rugged rudder feedback unit; with transmission link and 2 m cable 

21116165 RPU80; Reversible Pump. For cylinder displacement of 80-200 cm3 

21118203 RPU160: Reversible Pump. For cylinder displacement of 160-400 cm3 

21118211 RPU300-12 V: Reversible Pump. For cylinder displacement of 320 - 740 cm3 (requires J300X-40) 

21118476 RPU300-24 V DC: Reversible Pump. For cylinder displacement of 320 - 740 cm3 

22082929 AP35 Standard mounting kit 

22089536 NI300X NMEA 0183 Interface Unit; For installations requiring additional NMEA ports. Features 4 NMEA Rx/Tx 

ports, 1 AD10 type heading output port. Order required length Robnet cable separately. 

22085146 RI35MK2 Rudder Angle Indicator; Designed for indoor/outdoor mounting. Operates with RF300, or RF45X 

feedback units. Maximum of four units if operated on frequency; two units if operating on current. 

20214037 FU50 Follow Up Steering Lever; with mode buttons for FU, STBY and AUTO for indoor/outdoor mounting. 

Illuminated mode indicators. For use with AP35 and AP50 only. 


Part Number 

Description 

17 

20214375 FU50 Flush Mount Kit: For use with the upgraded FU50 steering levers. Fits FU50 rev EA and higher. 144mm x 

144mm aluminum matches size of RI9. 

23241227 S35 Non Follow Up Steering Lever: Spring loaded. Designed for indoor/outdoor mounting. Illuminated mode 

button. 

22088165 JS10 Non Follow Up Steering Lever: Two position NFU lever for indoor/outdoor mounting. 

22022446 R3000X Hand-held Remote: with 7m. cable and mounting bracket. Provides NFU steering in STBY and Dodge 

modes, course changing in Auto mode. 

22089494 QS50 Controller: 2-axis joystick for armrest and flush mounting. Mode change (except into Nav), NFU with quick 

rudder center function, and course change in Auto mode. Note: QS50 does not provide FU steering 

ap50 and ap50 plus compatible accessories 

Part Number 

Description 

20214011 “J50 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz heading output from Tx. port 2. Radar 

clock/data interface, External alarm, System select Autopilot/Main steering. Controls reversible drive units 

drawing up to 10A (continuous load) and solenoid activated steering system up to 3A (isolated output). Wheelmark 

approved for AP50 systems 

20214029 J50-40 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2. 

Radar clock/data interface, External alarm, System select Autopilot/Main steering. Controls reversible drive units 

drawing up to 20A (continuous load). 

20126819 "JD50 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2. Radar 

clock/data interface, External alarm, System select Autopilot/Main steering. Steering commands provided through 

solid state switching of two independent sets of directional solenoid valves. 19-40VDC,3A. Wheelmark approved 

for AP50 systems. 



solid state switching of two independent sets of directional solenoid valves. 110VDC, 1A. Wheelmark approved for 

AP50 systems. 

20126835 "JD52 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2. 

Radar clock/data interface, External alarm, System select Autopilot/Main steering. Steering commands provided 

through solid state switching of two independent sets of directional solenoid valves. 110/220VAC, 1A. Wheelmark 

approved for AP50 systems. 



two galvanic isolated output control signals of +/-10VDC, 4-20mA., or a control signal that can be adjusted within a 

certain range of an input reference voltage. Wheelmark approved for AP50 systems 

20214292 Optional Dual Analog board for NAUT-OSV alarm interface in JD5X. 

22084438 RC25 Rate Compass; Fluxgate compass with integrated rate gyro provides more stable heading. With 15m. Cable 

22086995 RFC35 Electronic Fluxgate Compass; with 15m. cable. Note: Not recommended as primary steering compass for 

larger vessels. Can be used as back up/Monitor compass. 

22087001 "CDI35 Course detector interface; Interface unit to connect autopilot to magnetic compass with CD100A or 

CD109 course detector. Wheelmark approved for AP50 systems. 

20106688 "CD100A Course Detector; with 5m. cable. Magnetic course detector with tripod holder for overhead and for 

conventional magnetic compass. Wheelmark approved for AP50 systems 

27102185 “RGC50 Gyrocompass for small vessels. Built in timer. Including RGC50 Master compass and RGC50 Sensitive 

element 


18 

Part Number 

Description 

20213815 GI51 pendulum ferry feature 

22011415 "RF45X Rugged rudder Feedback Unit; with transmission link and 2m Cable. Wheelmark approved for AP50 

systems. 

22506950 "RF14XU Heavy Duty Feedback Unit; Long life feedback unit with transmission linkage. Separate output for rudder 

angle indicators. Double set of limit switches. Requires 24VDC supply voltage. Wheelmark approved for AP50 

systems. 

20193744 "RF300 Rudder Feedback Unit: with transmission link and 10m Cable. Wheelmark approved for AP50 systems. 

21116165 RPU80; Reversible Pump. For cylinder displacement of 80-200 cm3 

21118203 RPU160: Reversible Pump. For cylinder displacement of 160-400 cm3 

21118211 RPU300-12 V: Reversible Pump. For cylinder displacement of 320 - 740 cm3 (requires J300X-40) 

21118476 RPU300-24 V DC: Reversible Pump. For cylinder displacement of 320 - 740 cm3 

20212130 AP50 Optional Mounting Bracket 

22089189 "TI51 Thruster Interface: Provides signal for operating one thruster by on/off solenoid, continuous control or 

Dantoss PVEM valve. Order required length Robnet cable separately. Wheelmark approved for AP50 systems. 

20213088 "AD50 Analog Drive: The AD50 provides Analog or Proportional control of a rudder, by either continuous voltage, 

or Danfoss PVEM valve signal. Set-up from AP50 Control Unit and communicates via RobNet. Please note that a ± 

10V controlled rudder requires no rudder feedback unit. Order required length Robnet cable separately. Wheelmark 


22085146 RI35 Mk2 45°-0-45° Rudder angle indicator. Operates on RF300, RF45 and RF45X feedback units. Adjustable 

illumination. IP56 (splashproof) protection. Can be used as stand-alone with RF45X independent of an autopilot. 

12/24V DC. 20 m cable included. Wheelmark approved for AP50 systems. 

22060966 Panorama Mk2 (45°-0-45°). 3-way indicator. For overhead mounting. Adjustable dial light. 24 V. "U" version for 

voltage input. Works with RF14XU only 

20214052 AP51Remote Control: With standard mounting kit. Wheelmark approved for AP50 systems. 

22086433 JP21 Bulkhead Socket: For connection of AP51. Supplied with 7m cable. 

22022446 R3000X Hand-held Remote Control: With 7m cable and mounting bracket. Provides NFU steering in STBY and 

Dodge modes plus course changing in auto mode. Wheelmark approved for AP50 systems. 

22089494 QS50 Controller: 2-axis joystick for armrest and flush mounting. Mode change (except into Nav), NFU with quick 

rudder center function, and course change in Auto mode. Note: QS50 does not provide FU steering 

22089734 Outdoor Mount: Designed for QS50 to fit inside of, for waterproof mounting in exposed locations. 

20214037 FU50 Follow Up Steering Lever; for indoor/outdoor mounting. Illuminated mode indicators. Wheelmark approved 

for AP50 systems. 

20214375 FU50 Flush Mount Kit NEW: For use with the upgraded FU50 steering levers. Fits FU50 rev EA and higher. 

144mm x 144mm aluminum matches size of RI9. 


Part Number 

Description 

19 

23601800 S9 Steering Lever (NFU): Indoor/outdoor panel bulkhead mounting. Can operate solenoids directly. Facility to 

change mode on autopilot. Wheelmark approved for AP50 systems. 

23241227 S35 NFU Spring loaded Steering Lever: Indoor/outdoor mounting, Hard wired to the junction box. Illuminated mode 

button. Wheelmark approved for AP50 systems. 

22088165 JS10 Steering lever (NFU): Remote for indoor/outdoor flat panel mounting. Includes 2m cable. Wheelmark 


ap50 standard junction units specifications 

J50 j50-40 

Supply Voltage 10-40 V 10-40 V 

Reverse voltage protection Yes No 

Solenoid/Motor drive (continuous/peak) 10/20 A 20/40 A 

Solenoid, external supplied 

• 

Total no. of Robnet control units Up to 10 Up to 10 

NMEA ports (in/out) 2 2 

Input for NFU control • • 

External alarm • • 

Radar clock / data interface • • 

System select Autopilot / Main steering • • 

Reversible hydraulic pump specifications 

model 

m oto r 

Autopilot 

ram capacity 

flow rate 

M a X 

pwr. 

boat 

volts 

computer 

min CM3 

(cu.in.) 

m a X C M 3 

(cu.in.) 

at 10 bar 

cm3 / min 

(cu.in / min) 

p r e s s u r e 

bar 

consumption 

lenght 

RPU80 12V AC10 

80 

250 

800 

50 2.4-6 A

20 

rgc50, GC80 and GC85 sPECIFICATIONS 

RGC50 GC80 GC85 

Setting time < 4h < 3h < 3h 

Pitch/Roll angle +/- 45 deg +/- 45 deg +/- 45 deg 

Follow-up rate > 36 deg/sec > 75 deg/sec > 75 deg/sec 

Weight 15.5 kg 23 kg 23 kg 

Type approval 

ACCURACY 

Wheelmark IMO: A424 (XI), 

A694 (17)IEC: 60945, 61162 

ISO: 8728 (1997) 

Wheelmark IMO: MSC97 (73), 

13.2.6 (2000 HSC Code) IEC: 

60945, 61162 ISO: 6328 (2001) 

Settle point error (x secant latitude) Less than -1.8deg ± Less than -0.1deg ± Less than -0.1deg ± 

Static error (x secant latitude) Less than -1.0 deg ± Less than -0.1 deg ± Less than -0.1 deg ± 

Dynamic error (x secant latitude) Less than -1.8 deg ± Less than -0.4 deg ± Less than -0.4 deg ± 

range of speed correction 0-50 knots 0-70 knots 

Horizontal acceleration 1m/s2 2m/s2 

Annual maintenance Not required Not required Not required 

Warranty period 2 years 2 years 2 years 

O p t i o n a l A C 

DATA OUTPUTS RGC50 Compact 

(power supply 

Expanded 

Dual 

for Compact) 

Stepper 1 *1 1 x 24V 

4 x 24V (option 2 

x 35 V) 

4 (option 2 x 35V) 

Serial (NMEA) 1 *1 4 (option 9) 10 (option 15) 10 (option 15) 

Syncro 

1:1 100V/400Hz 

Repeater back-up 1 + 4 4 + 10 4 + 10 

Rate of turn 3 3 

Weight 7 kg 9 kg 16 kg 23 kg 

Data inputs 

Serial (GPS) 1 1 1 

Serial (External Heading) 1 1 1 

Serial (LOG) 1 1 1 

Pulse (LOG) 

1 (200/400p p/ 

nm) 

1 (200/400p p/ 

nm) 

1 (200/400 p 

p/nm) 

POWER 

Power supply 24V DC 24V DC 

110/220V AC 50 

/60Hz 

110/220V AC 50 

/60Hz 

110/220V AC 50 

/60Hz 

Backup supply 24V DC 24V DC 24V DC 

Current consumption startup (A) 5A 3.3A 

1.4A incl. 

Compact 

1.5A 1.7A 

Current consumption normal (A) 2A 2.6A 1.1A incl. Compact 1.2A 1.4A 


mm 

gc80 and gc85 sPECIFICATIONS 

mm 

BOW 

mm 

SERVICE 

AREA 

21 

SERVICE 

AREA 

mm 

SERVICE 

AREA 

mm 

mm 

mm 

SERVICE 

AREA 

mm 

SERVICE 

AREA 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

BOW 

mm 

mm 

SERVICE 

AREA 

mm 

mm 

mm 

mm 

mm 

mm 

BOW 

mm 

mm 

mm 

mm 

mm 

SERVICE 

AREA 

SERVICE 

AREA 

mm 

mm 

mm 

BOW 

BOW 

mm 

mm 

SERVICE 

AREA 

gc80 and gc85 SERVICE compact system 

AREA 

SERVICE 

AREA 

mm 

SERVICE 

AREA 

mm 

mm 

mm 

SERVICE 

AREA 

mm 

mm 

mm 

mm 

mm 

mm 

m 

ERVICE 

AREA 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

m 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 


mm 

mm 

mm 

mm 

mm 

22 

gc80 and gc85 expanded system 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

gc80 and gc85 dual system 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

m 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

mm 

rgc50 sPECIFICATIONS 

228 mm (9.3”) 

1 1 

377 mm (15”) 

321 mm (12.6”) 

mm 


Mx575A SPECIFICATIONS 

23 

GPS / NAVIGATION 

GPS Receiver Channels: 12 channels 

DGPS: Receiver Type 

L1, C/A code, with carrier phase 

smoothing 

DGPS: Position Update Rate 1 Hz default (Position) up to 10 Hz 

heading output 

DGPS: Horizontal Accuracy < 1 m 95% (DGPS), < 5 m 95% 

(autonomous, no SA) 

DGPS: Heading Accuracy < 0.5 degrees rms 

DGPS: Rate of Turn 

90°/s max 

DGPS: Pitch / Roll Accuracy < 1 degree rms 

DGPS: Start-Up Time 

< 60 s typ. 

DGPS: Heading Fix 

< 20 s 

DGPS: Satellite Reacquisition < 1 s 

DGPS: Frequency Range 283.5 to 325 kHz 

DGPS: Adjacent Channel 61 dB @ f° +/- 400 Hz offset 

Rejection 

OTHER 

Bearing Accuracy: 

< 0.5 degrees rms 

Operating Temperature: -30°C to +70°C 

Operating Temperature Stored: -40°C to +85°C 

ENVIRONMENTAL 

Dimensions: 

60 cm (l) x 16 cm (w) x 18 cm (h) (Not 

including mounts) 

Weight: 

1.5 kg \ 3.31 lbs 

Humidity: 

100% condensing 

POWER 

Power Supply: 

8.0 to 40 VDC vDC 

Power Consumption: 

< 4.5 W, < 360 mA @ 12.0 VDC 

Reverse Polarity Protection: Yes (but not reverse polarity operation) 

Power Data Connector: 18-pin, Environmentally sealed 

COMMUNICATIONS 

Serial Ports 

3 full duplex RS-232 and 2 half-duplex 

RS-422 

Isolation: 

All serial ports optically isolated from 

power 

Baud Rates: 4800, 9600, 19200 

Data I/O Protocol: NMEA 0183 V3.0 

Correction I/O Protocol: RTCM SC-104 

NMEA Heading Messages: GPHDT, GPROT, PSAT, HPR, GGA, VTG, 

ZDA,GSA, GSV, GST, GBS, GRS 

Mx575A compatible accessories 

Part Number Picture Description 

575-500-03 MX575A DGPS Compass with MX500, and JB (add cable) 

Parts included:MX575A DGPS compass sensor, MX575A Power/Data 15m Cable, MX575A Manual, MX575A 

Pole Mount,MX575A Fixed Mount, MX575A Mounting Kit, MX500 2 port CDU, MX500 Mount Bracket Kit, 

Power/NMEA 3m Cable 

MX-500 

MX-500 CDU 

510-000-0000 MX510 CDU 

512-000-0000 MX512 CDU (also order JB P/N 512-100-1001) 

27107523 HR80 Heading repeater 

Parts included: 2 port MX500 CDU, Mount Bracket Kit, Power/NMEA 12-pins 3m Cable, Operator/Installation 

Manual, Quick Reference Guide 

Parts included: 2 port MX510 CDU, Mount Bracket kit, Power/NMEA 12-pins 3m Cable, Operator/Installation 

manual, Quick Reference Guide 

Parts included: 9 port MX512 CDU, Mount Bracket kit, Power/Date 3m Cable, Operator/Installation manual, 

Quick Reference Guide 


Sales and Service Worldwide 

EUROPE/MIDDLE EAST/ 

AFRICA 

ALGERIA 

Algerian Technical Services & 

Systems 

Lotissement El Bina 142 

Dely Ibrahim - Alger 16302 

Tel.: 213 21 37 05 56 

Fax.: +213 21 37 05 86 

ANGOLA 

JEMBAS-Assistència Tecnica 

Liimitada, Largo Do Soweto 88 

Luanda 

Tel.: +244 222 637 000 

Fax: +244 222 637 038 

BENELUX 

Simnav BV 

Van Hennaertweg 17a 

2952 CA Alblasserdam 

Tel.: +31 78 6921900 

BULGARIA 

BS Marine EOOD 

Bulstar Str #1 

8140 Atia Bulgaria 

Tel.: +359 550 422 42 

CROATIA 

Almar d.o.o. 

Porec - Kamenarija 12 

52452 Funtana 

Tel.: +385 52 445 005 

Fax: 385 52 445 276 

DENMARK 

See Germany 

ESTONIA 

Admiral Trade OÜ 

Regati 1 

11911 Tallinn 

Tel.: +372 639 89 46 

Fax: 372 639 89 30 

FINLAND 

At Marine OY 

Mesikukantie 16 

O1300 Vantaa 

Tel.: +35 89 5494 2600 

Fax: +35 89 5494 2700 

FRANCE 

Navico France S.A. 

Parc d’Activités Ragon, 

23 Avenue Pasteur 

44 119 Treillieres 

Tel.: +33 2 28 01 23 01 

Fax: +33 2 28 01 21 43 

GERMANY & AUSTRIA 

Navico GmbH 

Carl-Friedrich-Gauss Strasse 2 

24837 Schleswig 

Germany 

Tel.: +49 4621 96130 

Fax: +49 4621 961329 

GREECE & CYPRUS 

Aegean Electronics S.A. 

4, Zosimadon Street. 

185 31 Piraeus 

Greece 

Tel.: +30 210 413 7269 

Fax: +302 10 413 7270 

ICELAND 

Fridrik A. Jonsson EHF 

Akralind 2 

210 Kopavogur 

Tel.: +354 552 2111 

Fax: +354 552 2115 

ISRAEL 

P. Fischeles 

Building 62. Ma’agan Hadayig 

Kyshin 

26298 Haifa bay. Haifa. 

Tel.: +97 25444 19379 

ITALY 

Navico Italia Srl. 

Via Benadir 14 

20132 Milan 

Tel.: +39 02 26149517 

Fax: +39 02 8970035 

LEBANON & SYRIA 

Selcom Marine Sarl. 

P.O. Box 55541 

Dekwaneh Main Street 

Beirut 

Lebanon 

Tel.: +961 149 1489 

Fax: +961 149 5325 

MALTA 

Medcomms Ltd 

4 Msida Rd. 

Gzira GZR03 

Tel.:+356 21 335521 

Fax: +356 21 310820 

MOROCCO 

Soremar 

17 Rue Le Catelet, 

Edif. Emilie Zola 

21900 Casablanca 

Tel.: +212 22 24 82 45/49 

Fax: +212 22 24 83 36/52 

NORWAY 

ProNav AS 

Hovlandsveien 52 

N-4370 Egersund 

Tel.: +47 51 46 43 00 

POLAND 

Escort Ltd. Electronics Syst. 

Grudziadzka 3 

70–130 Szczecin 

Tel.: +48 91 43 10 400 

Fax: +48 91 48 24 777 

PORTUGAL 

Nautel - Sistemas 

Electronics Lda. 

Rua Fernando Mendes 

Pinto 46 

1400-146 Lisboa 

Tel.: +351 21 300 70 30 

Fax: +351 21 300 70 39 

ROMANIA 

Navtron Srl 

Str. Vasile Marcovici nr. 7 

9100130 Constanta 

Tel.: +40 241 545 650 

Fax: +40 241 555 582 

RUSSIA 

Simbia Engineering 

Company Ltd 

4A Verhneozernaya Str. 

236018 Kaliningrad 

Tel.: +7 0112 215492 

Fax: +7 0112 365380 

SOUTH AFRICA 

Marine Radio Acoustic Devices 

P.O. Box 12076 

N1 City 7463 

Cape Town 

Tel.: +27 21 559 4003 

Fax: +27 21 559 2752 

SPAIN 

Navico Marine Electronics S.L. 

Pol. Ind. Finestrat nave 14 

Avda. Pais Valenzia 28 

03509 Finestrat (Alicante) 

Tel.: +34 902 350 750 

Fax: +34 902 350 950 

SWEDEN 

Sportmanship Marin AB 

Bolshedens Industriväg 30 

427 50 Billdal 

Tel.: +46 31 726 14 00 

SWITZERLAND 

Marine Parts Technics AG 

In der Au 5 

CH-8406 Winterthur 

Tel: +41 52 203 66 55 

Fax: +41 52 203 66 56 

TUNISIA 

Méditerranée Services 

Résidence Du Lac Bloc D, 

no 11 

1053 Les Berges Du Lac 

Tel.: +216 71 86 02 01 

Fax: 216 71 86 10 23 

TURKEY 

Promar Marine Equip. Ltd. 

Igrip Sokak Gul. Apt. No: 7/2 

81030 Fenerbache (Istanbul) 

Tel.: +90 216 3460 894 

Fax: +90 216 3461 493 

UNITED ARAB EMIRATES 

Emphor FZCO 

P.O. Box 61232 

Jebel Ali Free Zone 

Dubai 

UAE 

Tel.: +97 148 830 233 

Fax: +97 148 830 133 

UNITED KINGDOM & IRELAND 

Navico Ltd (UK) 

Premier Way, Abbey Park 

Romsey, Hampshire 

UK, S051 9DH 

Tel.: +44 1794 51 0010 

Fax: +44 1794 51 0006 

ASIA PACIFIC 

AUSTRALIA 

Navico Australia Pty. Ltd. 

Unit 5, 12 Mars Rd, 

Lane Cove NS W 2066 

Tel: +02 9936 1000 

Fax: +02 9936 1001 

CHINA & HONG KONG 

CITE Limited 

Rm C-E, 16/F, Yan’s Tower 

26-27 Wong Chuk Hang Road 

Aberdeen 

Hong Kong 

Tel.: +852 2552 0178 

Fax: +852 2873 0679 

Peaceful Marine Electronics Co., 

Ltd. 

FRoom 1002 Unit 2 

No.32 XiAn Road 

Shahekou District 

Dalian China 116021 

Tel: +86 411 84643892 

INDIA 

Elektronik Lab 

R/13 Navroz Baug, Lalbaug, 

Mumbai 400012 

Tel: +91 2224 71 5115 

Elcome Marine Services Private 

Limited 

Great Eastern Summit “A” 

11th Floor, Plot No. 56, Sector -15 

C.B.D. Belapur, 

New Mumbai 400 614 

Tel: +91 22 676 18000 

JAPAN 

KGK JAPAN 

Relax Building 7F, 2-5-15, 

Ogi-Cho, Naka-Ku, Yokohama, 

231-0027, Japan 

Tel: +81 45 664 7318 

Fax: +8145 664 7319 

MALDIVES 

Maizan Electronics Pte. Ltd 

Henveyru, 08 Sosunmagu 

Male’ 20012, 

Tel: +960 332 3211 

NEW CALEDONIA 

Altomarine S.A.R.L. 

ZT Nouville Plaisance 

9 Rue Capitaine BOIS 

98846 Noumea BP 14348 

Tel: +687 259612 

Fax: +687 254330 

NEW ZEALAND 

Advance Trident Ltd 

383 New North Road 

Kingsland, P.O. Box 4174 

Auckland 

Tel.: +64 9 845 5347 

Fax: + 64 9 845 5348 

PHILIPPINES 

Norwegian Marine Consultancy 

Inc. 

Bldg. 1, Cebu yacht Club 

Pusok, Lapu Lapu City 6015 

Tel.: +63 32 34 00 292 

Fax: +63 32 34 07 303 

SINGAPORE, MALAYSIA & 

VIETNAM 

Jason Electronics Pte Ltd 

Blk 194 Pandan Loop #06-05 

Pantech Industrial Complex 

Singapore 128383 

Tel.: +65 6 872 0211 

Fax: +65 6 872 1800 

SRI LANKA 

International Marine Services 

420/23/B1, Welipara, 

Thalawathugoda 

Sri Lanka 

Tel.: +94 717 262 233 

SOUTH KOREA 

Turn-On Electronics Co. 

7th fl. Dong-A Ilbo Bldg. 

53-11, 4-KA 

Choongang-Dong 

Choong-Ku, Busan 

Tel.: +82 51 462 3930 

Fax: +82 51 462 3089 

TAHITI - FRENCH POLYNESIA 

Tahiti Sport S.A. 

P.O. Box 62 

98713 Papeete 

French Polynesia 

Tel.: +689 50 59 59 

Fax: +689 42 17 75 

TAIWAN 

Dragon & Elephant Enterprise Co. 

Ltd 

12F-4, No. 251 

Min Chuan 1st Road 

Kaohsiung 

Taiwan R.O.C. 

Tel.: +886 722 72887 

Fax: +886 722 72910 

THAILAND 

Electrical Marine Co.Ltd 

Phuket Boat Lagoon 

20/9-10 Moo 

Thepkasattri Road, 

Koh Kawe, Muang 

Phuket 83200 

Tel.: +66 76 239 112 

Fax: +66 76 239 058 

VIETNAM 

AMI International Pte Ltd. 

Tel.: +65 67 75 00 81 

Fax: +65 67 79 78 56 

AMERICAS 

ARGENTINA 

R.C. International 

Av. Corrientes 3150 13F 

1193 Buenos Aires 

Tel.: +54 11 4866 0430 

Fax: +51 11 4862 0430 

BRAZIL 

Electra Service 

P.O. Box 111 

11410-971 Guarujà 

Sao Paulo 

Tel.: +55 3354 3599 

Fax: +55 3354 3471 

CHILE 

Robinson Marine Electronics S.A. 

Avda. Vitacura 3568 OF 502 

Casilla 19012 Cooreo 19 

Vitacura Santiago 

Tel.: +56 2 207 3059 

Fax: +56 2 207 2695 

URUGUAY 

Electromaritima Uruguaya Ltda 

Guatemala 1260 

11800 Montevideo 

Tel.: +59 82 9247 789 

Fax: +59 82 9247 138 

USA, CANADA & MEXICO 

Navico 

410 Amherst Street 

Suite 110 

03063 Nashua, NH 

USA 

Tel.: 1-800-628-4487 

Tel.: +1 603-324-2042 

Navico Torrance 

23868 Hawthorne Blvd., 

Suite 201 

Torrance, CA 90505 

Tel.: +1 310 791 8213 

Fax: +1 310 791 6108 

Navico Operational Headquarters | Donker Duyvisweg 56 3316 BM Dordrecht, The Netherlands 

www.simrad-yachting.com/professional

Simrad Autopilot, Gyro Compass and Heading Sensor ... - ProNav

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?