Owner's Manual Blu-ray DiscTM Player - Panasonic

service.us.panasonic.com

Owner's Manual Blu-ray DiscTM Player - Panasonic

When you experience

problems with settings

Wireless Settings

Wireless Settings

Failed to complete.

A conflict with another device occurred.

Do you want to configure wireless network connection

setting again ?

OK

14 VQT3B58

Display Check the following

A conflict with another

device occurred.

A time out error

occurred.

An authentication error

or a time out error

occurred.

A device error occurred.

≥ Please wait a few moments,

and then try again.

≥ Setting of the Wireless router

for MAC Address etc.

≥ The signal may be weak.

[BDT110] : Using the USB

extension cable supplied with

the Wireless LAN Adaptor,

adjust the position of the

Wireless LAN Adaptor.

≥ The SSID (� 15) and the

encryption key of the Wireless

router.

≥ Please wait a few moments,

and then try again.

≥ [BDT110] : Connection of

Wireless LAN Adaptor

≥ Contact our Customer

Service Center or your

nearest dealer.

Network Easy Setting

(Home Network Connection Check)

Network Easy Setting (Home Network Connection Check)

Complete.

1. LAN cable connection

2. IP address setting

3. Connection to gateway

LAN cable is not connected.

Please check the connection.

Select “Yes” and press [OK] to check network

connection again. Select “No” and press [OK]

to finish Network Easy Setting.

Yes No Display

OK

1. LAN cable connection or

Wireless setting

:Fail

2. IP address setting : Fail

3. Connection to gateway : Fail

1. LAN cable connection or

Wireless setting

:Pass

2. IP address setting : Fail

3. Connection to gateway : Fail

1. LAN cable connection or

Wireless setting

:Pass

:Pass or

2. IP address setting

Home

network

available

3. Connection to gateway : Fail

Check the

following

≥ Connection of

the LAN

cables (� 10)

≥ Connection

and settings

of the hub

and router

≥ Settings of

“IP Address/

DNS

Settings”

(� 32)

Network Easy Setting (Internet Connection Check)

OK

Yes No

Display Check the following

Cannot find the

server.

(Error code: B019)

Failed to connect to

the server.

(Error code: B020)

: Fail

: Fail

: Fail

Network Easy Setting (Internet Connection Check)

Complete.

- Connection to the Internet : Fail(Error code: B019)

Failed the connection test.

Cannot find the server.(Error code: B019)

Please refer to the owner's manual for the cause of

the error and the solution for it.

Press [OK].

≥ “Primary DNS” and “Secondary

DNS” settings of “IP Address/

DNS Settings” (� 32)

≥ The server may be busy or the

service may have been

suspended. Please wait a few

moments, and then try again.

≥ Settings of “Proxy Server

Settings” (� 32) and the router

More magazines by this user
Similar magazines