Operators and Installation Manual TR-810.pdf - Jotron
Operators and Installation Manual TR-810.pdf - Jotron
Operators and Installation Manual TR-810.pdf - Jotron
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4 <strong>Installation</strong><br />
4.1 Compass safe distance<br />
The Compass safe distance for the <strong>TR</strong>‐810 is minimum 110cm.<br />
4.2 Introduction.<br />
The procedures for installing the transceiver are described in Table 4.2‐1 below.<br />
It is recommended that these procedures are completed in the order shown.<br />
Procedure<br />
Reference<br />
1 Initial inspection 4.3<br />
2 Install equipment 4.4<br />
4 Connect remote connectors as required 4.7<br />
5 Connect antenna 4.5<br />
6 Connect DC supply 4.6<br />
Table 4.2‐1, <strong>Installation</strong> procedures<br />
4.3 Initial inspection<br />
Items included for a <strong>TR</strong>‐810 transceiver<br />
1 <strong>TR</strong>‐810 transceiver<br />
2 CD with <strong>Operators</strong> <strong>Manual</strong><br />
3 Accessories ordered according to model <strong>and</strong> installation. See Table 1.1‐2,<br />
Accessory list<br />
Table 4.3‐1, Inspection procedures<br />
On receipt of the radio unit, remove all transit packaging <strong>and</strong> check that there is no damage<br />
to the equipment. If damage is evident, contact <strong>Jotron</strong> AS immediately <strong>and</strong> retain the<br />
original transit packaging.<br />
84417_O&I_<strong>TR</strong>-810_D 3B<strong>Installation</strong> Page 4‐1
Change language