Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Slide Beams<br />
The Hepco Slide Beam consists of a Flat Slide mounted onto a precision, anodised aluminium extrusion to provide a rigid<br />
self-supporting beam which can form an integral part of a machine structure (refer slide deflection calculations). There are<br />
two basic sizes of beam, each available with a number of different Slide widths to cater for customer’s space and moment<br />
load requirements. The smaller size Beam is available as a lightweight version, this reduces inertia where the Slide Beam<br />
is to be used dynamically. All Slide Beams can be supplied in lengths of up to 8 metres in one piece* 1,3 and are compatible<br />
with all Hepco Bearings, Carriages and Lubrication Devices. Slides can be specified in any of the three grades of precision<br />
available depending upon the requirements for cost, accuracy and performance (see System Selector).<br />
Customers contemplating driving by means of a belt, steel band, cable or chain, will benefit from the large hollow centre<br />
which can be used for routing the return. If drive by timing belt is required, please consider the Hepco Belt Driven<br />
Carriage which has been specifically designed for such application. This will require the counterbored screw fixing option<br />
F<br />
±0.025<br />
-0<br />
B<br />
±0.025<br />
M6 screw (not supplied)<br />
Quick fit T nut<br />
RTN8M6<br />
(optional)<br />
8<br />
Fixing<br />
Clamp<br />
(optional)<br />
P1 P2 P3<br />
M6<br />
19<br />
15<br />
23<br />
Indicates surfaces which are precision ground<br />
End Cover x 2<br />
(optional)<br />
Heavy Duty T nut* 5<br />
TN8M6 (optional)<br />
Counterbored screw option<br />
B<br />
A<br />
9.5<br />
87.7<br />
8<br />
39.5<br />
53<br />
65.3<br />
55<br />
20<br />
7.75<br />
8<br />
33 27<br />
48<br />
R5<br />
65.3<br />
55<br />
20<br />
T Slot Cover<br />
(optional)<br />
Part No. TC8* 6<br />
8<br />
53<br />
68<br />
45<br />
R5<br />
20<br />
75<br />
20<br />
20<br />
20<br />
20 20<br />
20<br />
80 80<br />
SB S...L Lightweight<br />
Slide Beam<br />
20<br />
SB S... Slide Beam<br />
20 20<br />
100<br />
SB M... Slide Beam<br />
Part<br />
Number<br />
SB S 35...<br />
SB S 50...<br />
SB M 44...<br />
SB M 60...<br />
SB M 76...<br />
Standard<br />
AU 35 25...<br />
AU 50 25...<br />
AU 44 34...<br />
AU 60 34...<br />
AU 76 34...<br />
Use With Carriages* 4<br />
Slimline<br />
AU 35 265...<br />
AU 50 265...<br />
AU 44 360...<br />
AU 60 360...<br />
AU 76 360...<br />
Belt Drive<br />
AU BD 35 25...<br />
AU BD 50 25...<br />
AU BD 44 34...<br />
AU BD 60 34...<br />
AU BD 76 34...<br />
A<br />
~Slide Width<br />
35<br />
50<br />
44<br />
60<br />
76<br />
P1 & P2<br />
35.81<br />
50.81<br />
44.81<br />
60.81<br />
76.81<br />
B<br />
P3<br />
36.58<br />
51.58<br />
45.58<br />
61.58<br />
77.58<br />
C* 2<br />
43<br />
43<br />
43<br />
43<br />
43<br />
D* 2<br />
43<br />
43<br />
43<br />
43<br />
43<br />
E<br />
90<br />
90<br />
90<br />
90<br />
90<br />
P1<br />
4.77<br />
4.77<br />
6.27<br />
6.27<br />
6.10<br />
F<br />
P1 & P2<br />
5<br />
5<br />
6.5<br />
6.5<br />
6.5<br />
Notes:<br />
1. Beams longer than 4020 mm (6000 mm for P3 grade) will be supplied with two or more lengths of matched Slide each mounted and doweled to form a<br />
precision joint. Additional fixing screws will normally be provided adjacent to each join. Slide Beams with shorter slides fixed in any position, can be supplied<br />
upon request.<br />
2. For optimum price and delivery time, Slide Beam lengths should be specified which maintain the C and D dimensions in the table above. In all cases unless<br />
otherwise specified by the customer, C and D dimensions will be supplied equal.<br />
3. For requirements in excess of 8 m, Slide Beams can be supplied matched ready for joining. Please contact Hepco for details.<br />
4. In the table, the available choices of Carriage to use with each Slide Beam are quoted. However, it is possible to use a customer made carriage incorporating<br />
other sizes of Bearings (please see details of "mix and match" possibilities).<br />
5. The Heavy Duty T nut is recommended for the Lightweight Beam and where greater security of fixing is required. T nut section is also available in undrilled<br />
lengths up to 3000 mm. Please specify part number TN8S followed by the required length in mm.<br />
6. The T slot cover is made from black UPVC and is available in lengths up to 8000 mm. Please specify part number TC8 followed by the required length in mm.<br />
30