Industrial Communication for Automation and Drives - Induteq

Process or field communication
PROFIBUS DP/PA
PROFIBUS links field devices such as
distributed I/O or drives with automation
systems such as SIMATIC S7
programmable controllers, SIMOTION or
PCs.
PROFIBUS, which is based on the
IEC 61158/EN 50170 Standard, is a
powerful, open, rugged fieldbus system
with short response times.
The following protocols are available for
process or field communication with
PROFIBUS:
PROFIBUS DP
(distributed peripherals)
PROFIBUS DP is used to connect
distributed field devices such as SIMATIC
ET 200 ® or drives with very fast response
times.
PROFIBUS PA
(Process Automation)
PROFIBUS PA is an expanded version of
PROFIBUS DP which offers intrinsically
safe data and power transmission (e.g.
measuring transducers in the food
industry) in conformance with
International Standard IEC 6158-2.
PROFIBUS DP/PA is used when
actuators/sensors in the machine or plant
(e.g. at the field level) are widely
distributed and can be spatially combined
in a single station (such as the ET 200).
In this case, the actuators/sensors are
connected to the field devices, which are
supplied with output data as per the
master/slave principle and provide the
controller or PC with input data.
At SIMOTION's drive interface, the
isochrone PROFIBUS is supported by
PROFIdrive's "drive engineering" profile.
S7-400
S7-300
SIMATIC C7
S7-400
S7-300
SIMATIC TDC
SIMATIC C7
CPU 41x -2/3
FM 458-1 DP
CPU 317T-2 DP
31xF-2 DP
31x-2 DP
31xC-2 DP
C7-633 DP
C7-634 DP
C7-635
C7-626
C7-636
CP 443-5 Extended
IM 467/467 FO
CP 342-5/CP 342-5 FO
CP 50M0
CP 342-5/CP 342-5 FO
SIMOTION C/P/D
Integrated interface
10