Basacote® Plus 6 month (16-3.5-10) - BASF Asia Pacific

Three reason’s
to have confidence
in BASF...
BASF Australia proudly acknowledge their partnership
with these internationally renowned companies. Manufacturers
of quality products for the Australian agricultural market.

Contents
Broadacre
Horticulture
Turf
Nursery
Home Garden
Entec Next Generation Fertilisers N P K Mg S TE
Field Grade
These products have been treated to inhibit ENTEC® blue special 12 5 14 1 6 ✔
nitrification for a period of time. ENTEC® perfekt 14 3 14 1 11 ✔
These products have application for users striving ENTEC® 26 26 13
for quality and/or yield gains in conventional and ENTEC® N-Mag 22 4 12
environmentally sensitive areas.
Fertigation Grade
ENTEC® solub 21 21 24
ENTEC® solub 14-21 14 21 5
ENTEC® solub 20-2.2-8.3 20 2 8 1 13
ENTEC® solub 16-4.4-14.1 16 4 14 11
ENTEC® solub 14-3.5-24.9 14 4 25 6
Compound Fertilisers N P K Mg S TE
Each granule of these products contains Nitrophoska® blue special 12 5 14 1 6 ✔
the same amount of nutrient. This allows for Nitrophoska® elite 12 4 17 1 8 ✔
uniform and efficient plant uptake. Nitrophoska® perfekt 15 2 17 1 8 ✔
Nitrophoska® suprem 20 2 8 1.8 3 ✔
Field Grade Fertilisers N P K Mg S TE
Fine particle size enables use on turf to Ferro Top 6 10 4 18 ✔
improve nutrient levels. Kali Gazon 22 7 17
Use of these products allows the flexible Ammonium sulphate nitrate 26 14
application of efficient, immediately plant
Ammonium sulphate nitrate
useable Nitrogen sources, in the form of with boron 26 13 ✔
ammonium and nitrate.
Ammonium sulphate nitrate
with magnesium 22 4 12
Calcium ammonium nitrate 29 (Ca = 9)
Magnesium and Potassium products with ESTA® Kieserite Fine 16 22
readily plant available nutrients which can be ESTA® Kieserite Granular 15 20
field applied. Korn-Kali Granular 33 4 4
Patent Kali Granular 25 6 17
Patent pk 5 13 3
Muriate of Potash Granular 50
Sulphate of Potash Granular 42 8

Broadacre
Horticulture
Turf
Nursery
Home Garden
Controlled Release Fertilisers N P K Mg S TE
The controlled even release of nutrient for Basacote® Plus 3M 16 4 10 1 5 ✔
these products is controlled by the products Basacote® Plus 6M 16 4 10 1 5 ✔
polymer coating. Basacote® Tabs 6M 16 4 10 1 5 ✔
Basacote® Plus 6MK 11 4 16 1 7 ✔
Basacote® Tabs 6MK 11 4 16 1 7 ✔
Basacote® Plus 9M 16 4 10 1 5 ✔
Basacote® Plus 9MK 11 4 16 1 7 ✔
Basacote® Plus 12M 15 4 10 1 5 ✔
The slow release of nutrients for these products is Floranid® Club 10 2 17 2 8 ✔
controlled by the Isodur Ntrogen content. Floranid® Eagle 24 2 8 ✔
Floranid® Eagle K 12 3 20 ✔
Floranid® Eagle NK 20 17 2 3 ✔
Floranid® Eagle Start 18 11 4 ✔
Floranid® Master 16 2 8 3 8 ✔
Floranid® Master Extra 19 2 8 1 8 ✔
Floranid® N32% 32
Floranid® NK 14 16 2 10
Floranid® Turf 20 2 7 1 7 ✔
Nitrophoska® Slow Release 15 4 13 1 8 ✔
The ploymer coating on part of these products Nitrophoska® Top 15 15 4 13 1 6 ✔
enables these products to exhibit both controlled Nitrophoska® Top 20 20 2 8 2 5 ✔
and quick acting release characteristics. Nutriforest 9 10 12 2 7 ✔
The slow release of nutrient for this product is Triabon® 16 4 10 2 9 ✔
controlled by the Crotodur Nitrogen content.
Soil Conditioners N P K Mg S TE
Improves soil conditions to aid in root growth Agrosil LR 9
Wetting agent concentrate
KICK
Organic Fertilisers N P K Mg S TE
Products certified by the Biological Farmers of Epsom Salt Pure, Technical 16 20
Australia Co-op Ltd for use on Organic Farms ESTA® Kieserite Fine 16 22
ESTA® Kieserite Granular 15 20
Patent Kali Granular 25 6 17
Patent pk 5 13 3
Sulphate of Potash Granular 42 18

Broadacre
Horticulture
Turf
Nursery
Home Garden
Foliar & Soluble Fertilisers N P K Mg S Ca TE
Fertigation Grade
These products can be used for Fertigation to ENTEC® solub 21 21 24
supply plants with necessary nutrients. ENTEC® solub 14- 21 14 21 5
ENTEC® solub 20-2.2-8.3 20 2 8 1 13
ENTEC® solub 16-4.4-14.1 16 4 14 11.2
ENTEC® solub 14-3.5-24.9 14 4 25 6
Monoammonium Phosphate
(MAP), Greenhouse Grade 12 27
Monopotassium Phosphate (MKP) 23 29
Muriate of Potash Fine 50
Nitrophoska® solub 14-2.6-19.9 14 3 20 2 7 ✔
Nitrophoska® solub 15-4.4-12.5 15 4 13 1 12 ✔
Nitrophoska® solub 8-5.2-19.9 8 5 20 2 12 ✔
Basafer (Iron = 6) ✔
Used for Fertigation and or Foliar application
Other Products
Calcium Nitrate,
Greenhouse Grade 15 20
Epsom Salt Pure, Technical 16 20
Foliar Nitrophoska® 12 2 7 1 ✔
Potassium Nitrate 13 38
SoluPotasse® Sulphate of Potash 42 18
Trace Elements
Range of nutrients to be applied as foliar Basfoliar Combi-Stipp 9 11 ✔
or fertigation applications based on various Basfoliar 36 extra 27 2 ✔
technologies. Basfoliar range (various nutrients) ✔
Fetrilon® 13% (Iron = 13) ✔
Fetrilon® Combi-2
Zitrilon SM 10% (Zinc = 10) ✔
✔
Articles

Controlled Release Fertilisers
Controlled Release Fertilisers

Controlled Release Fertilisers
Controlled Release Fertilisers
Basacote ® Plus 3 month (16-3.5-10)
TECHNICAL DATA
Primary Nutrients:
16.0% Nitrogen (N)
7.4%NO 3 Nitrogen
8.6% NH 4 Nitrogen
3.5% Phosphorus (P) soluble in neutral ammonium citrate
2.4% P water soluble
10.0% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.2% Magnesium (Mg)
0.8% water soluble
5.0% Sulphur (S),
4.0% water soluble
0.02% Boron (B)
0.05% Copper (Cu)
0.4% Iron (Fe)
0.06% Manganese (Mn)
0.015% Molydenum (Mo)
0.02% Zinc (Zn)
Physical Properties:
Granular solid fertiliser, surface-treated,
100% polymer-coated
Granulometry:
Min. 90% 2.0 - 4.0 mm
Controlled nutrient release:
The nutrients are released out of the coated granules via diffusion influenced by moisture and
temperature.
The product lasts 3 months under temperate conditions.
Recommendations for application:
Basacote Plus 3 month (16-3.5-10) contains all nutrients required for the healthy growth of plants. As
a result, additional fertiliser applications are not necessary. Mixing into substrate is recommended
directly before use (maximum storage time 10 days).
The amount of Basacote Plus 3 month (16-3.5-10) applied will vary according to useage pattern,
desired outcome and seasonal influences such as temperature and wet conditions but the below
rates are given as a guide. These recommendations are given as a practical guide to good
agronomic practice under most situations. Local agronomic conditions should also be taken into
account, as these may affect responsiveness of fertiliser application.
Suggested application:
Nutrient Requirement
Rate in g/l or kg/m 3 Low Medium High
Shrubs & Cover Crops 1.0 - 2.0 1.0 - 2.0 2.0 - 3.0
Potplants 2.0 - 2.5 2.5 - 3.5 3.5 - 4.5
Bedding and balcony plants 2.0 - 2.5 2.5 - 3.5 3.5 - 4.5
Cutflowers 3.0 - 7.0 kg/100m 3
The rates are based on potting media not containing added fertilisers and mature plants. One has to
account for nutrients in readymade potting media or soils. Half of the above rates are suggested for
young plants.
For more detailed instructions contact your local Basacote Plus agent.
Bulk Density:
Approx. 1100 kg/m 3
Colour:
Green
Storage Notes:
Store Basacote Plus 3 month (16-3.5-10) in a dry location protected from frost, heat and direct
sunlight.
A 25kg bag of Basacote Plus 3month (16-3.5-10) contains
4.0 kg Nitrogen (N)
0.9 kg Phosphorus (P)
2.5 kg Potassium (K)
0.3 kg Magnesium (Mg)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Basacote ® Plus 6 month (16-3.5-10)
TECHNICAL DATA
Primary Nutrients:
16.0% Nitrogen (N)
7.4% NO 3 Nitrogen
8.6% NH 4 Nitrogen
3.5% Phosphorus (P) soluble in neutral ammonium citrate
2.4% P water soluble
10.0% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.2% Magnesium (Mg)
0.8% water soluble
5.0% Sulphur (S),
4.0% water soluble
0.02% Boron (B)
0.05% Copper (Cu)
0.4% Iron (Fe)
0.06% Manganese (Mn)
0.015% Molydenum (Mo)
0.02% Zinc (Zn)
Physical Properties:
Granular solid fertiliser, surface-treated,
100% polymer-coated
Granulometry:
Min. 90% 2.0 - 4.0 mm
Bulk Density:
Approx. 1100 kg/m 3
Colour:
Green
Controlled nutrient release:
The nutrients are released out of the coated granules via diffusion influenced by moisture and
temperature.
The product lasts 5 - 6 months under temperate conditions.
Recommendations for application:
Basacote Plus 6 month (16-3.5-10) contains all nutrients required for healthy growth of plants. As a
result, additional fertiliser applications are not necessary. Mixing into substrate is recommended
directly before use (maximum storage time 10 days).
The amount of Basacote Plus 6 month (16-3.5-10) applied will vary according to usage pattern,
desired outcome and seasonal influences such as temperature and wet conditions but the below
rates are given as a guide. These recommendations are given as a practical guide to good
agronomic practice under most situations. Local agronomic conditions should also be taken into
account, as these may affect responsiveness of fertiliser application
Suggested application:
Nutrient Requirement
Rate in g/l or kg/m 3 Low Medium High
Substrate fertiliser for tree nurseries 2.0 - 3.0 3.0 - 4.0 4.0 - 5.0
Shrubs & Cover Crops 1.0 - 2.0 1.0 - 2.0 2.0 - 3.0
Potplants 2.0 - 3.0 3.0 - 4.0 4.0 - 6.0
Bedding and balcony plants 2.0 - 3.0 3.0 - 4.0 4.0 - 5.0
Cutflowers 4.0 - 8.0 kg/100m 3
Landscaping applications;
Turf establishment 100 - 150 g/m 2 or 1.5 - 2.0 kg/m 2
Tree & Shrub planting 150 - 200 g/m 2 or 2.0 - 3.0 kg/m 2
Shrubs 60 - 150 g/m 2 or 1.5 - 2.5 kg/m 2
Public green 60 - 100 g/m 2 or 3.0 - 4.0 kg/m 2
The rates are based on potting media not containing added fertilisers and mature plants. One has to
account for nutrients in readymade potting media or soils. Half of the above rates are suggested for
young plants.
For more detailed instructions contact your local Basacote Plus agent.
Storage Notes:
Store Basacote Plus 6 month (16-3.5-10) in a dry location protected from frost, heat and direct
sunlight.
A 25kg bag of Basacote Plus 6 month (16-3.5-10) contains
4.0 kg Nitrogen (N)
0.9 kg Phosphorus (P)
2.5 kg Potassium (K)
0.3 kg Magnesium (Mg)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Basacote ® Tabs 6 month (16-3.5-10)
TECHNICAL DATA
Primary Nutrients:
16.0% Nitrogen (N)
7.4% NO 3 Nitrogen
8.6% NH 4 Nitrogen
3.5% Phosphorus (P) soluble in neutral ammonium citrate
2.4% P water soluble
10.0% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.2% Magnesium (Mg)
0.8% water soluble
5.0% Sulphur (S)
4.0% water soluble
0.02% Boron (B)
0.05% Copper (Cu)
0.4% Iron (Fe)
0.06% Manganese (Mn)
0.015% Molydenum (Mo)
0.02% Zinc (Zn)
Physical Properties:
Granular solid fertiliser, surface-treated,
100% polymer-coated, in cone form
Size:
Approx 7.5g each
Controlled nutrient release:
The nutrients are released out of the coated granules via diffusion influenced by moisture and
temperature.
The product lasts 5 - 6 months under temperate conditions.
Recommendations for application:
Basacote Tabs 6 month (16-3.5-10) contains all nutrients required for healthy growth of plants. As a
result, additional fertiliser applications are not necessary. Application into substrate is recommended
directly before use (maximum storage time 10 days). Distribute the Cones evenly when potting; press
the Cones approximately 3 centimetres into the substrate when topdressing.
The amount of Basacote Tabs 6 month (16-3.5-10) applied will vary according to useage pattern,
desired outcome and seasonal influences such as temperature and wet conditions but the below
rates are given as a guide. These recommendations are given as a practical guide to good
agronomic practice under most situations. Local agronomic conditions should also be taken into
account, as these may affect responsiveness of fertiliser application
Suggested application:
Volume in Litres
Rate Cones / pot 2 3 4 5
Container Nursery Stock 1 2 3 3
Potplants 1 2 2 3
Planting Containers - 2 2 4
The rates are based on potting media not containing added fertilisers and mature plants. One has to
account for nutrients in readymade potting media or soils. Half of the above rates are suggested for
young plants.
For more detailed instructions contact your local Basacote Tabs agent.
Storage Notes:
Store Basacote Tabs 6 month (16-3.5-10) in a dry location protected from frost, heat and direct
sunlight in the bucket tightly sealed.
A 7.5g Cone of Basacote Tabs 6 month (16-3.5-10) contains
1.2 g Nitrogen (N)
0.3 g Phosphorus (P)
0.8 g Potassium (K)
0.1 g Magnesium (Mg)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Basacote ® Plus
6 month K (11-3.9-15.8)
TECHNICAL DATA
Primary Nutrients:
11.0% Nitrogen (N)
4.5% NO 3 Nitrogen
6.5% NH 4 Nitrogen
3.9% Phosphorus (P) soluble in neutral ammonium citrate
3.1% P water soluble
15.8% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.2% Magnesium (Mg)
0.8% water soluble
7.0% Sulphur (S)
6.0% water soluble
0.02% Boron (B)
0.05% Copper (Cu)
0.23% Iron (Fe)
0.06% Manganese (Mn)
0.015% Molydenum (Mo)
0.02% Zinc (Zn)
Physical Properties:
Granular solid fertiliser, surface-treated,
100% polymer-coated
Controlled nutrient release:
The nutrients are released out of the coated granules via diffusion influenced by moisture and
temperature.
The product lasts 5 - 6 months under temperate conditions.
Recommendations for use:
Basacote Plus 6 month K (11-3.9-15.8) contains all nutrients required for healthy growth of plants.
As a result, additional fertiliser applications are not necessary. Mixing into substrate is recommended
directly before use (maximum storage time 10 days).
The amount of Basacote Plus 6 month K (11-3.9-15.8) applied will vary according to usage pattern,
desired outcome and seasonal influences such as temperature and wet conditions but the below
rates are given as a guide. These recommendations are given as a practical guide to good
agronomic practice under most situations. Local agronomic conditions should also be taken into
account, as these may affect responsiveness of fertiliser application
Suggested application:
Nutrient Requirement
Rate in g/l or kg/m 2 Low Medium High
Container nursery stock 2.5 - 3.5 3.5 - 4.5 4.5 - 6.0
Potplants 2.5 - 3.5 3.5 - 4.5 4.5 - 6.0
The rates are based on potting media not containing added fertilisers and mature plants. One has to
account for nutrients in readymade potting media or soils. Half of the above rates are suggested for
young plants.
For more detailed instructions contact your local Basacote Plus agent.
Granulometry:
Min. 90% 2.0 - 4.0 mm
Bulk Density:
Approx. 1100 kg/m 3
Colour:
Reddish-olive
Storage Notes:
Store Basacote Plus 6 month K (11-3.9-15.8) in a dry location protected from frost, heat and
direct sunlight.
A 25kg bag of Basacote Plus 6 month K (11-3.9-15.8) contains
2.8 kg Nitrogen (N)
0.4 kg Phosphorus (P)
2.5 kg Potassium (K)
0.3 kg Magnesium (Mg)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Basacote ® Tabs
6 month K (11-3.9-15.8)
TECHNICAL DATA
Primary Nutrients:
11.0% Nitrogen (N)
4.5% NO 3 Nitrogen
6.5% NH 4 Nitrogen
3.9% Phosphorus (P) soluble in neutral ammonium citrate
3.1% P water soluble
15.8% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.2% Magnesium (Mg)
0.8% water soluble
7.0% Sulphur (S)
6.0% water soluble
0.02% Boron (B)
0.05% Copper (Cu)
0.23% Iron (Fe)
0.06% Manganese (Mn)
0.015% Molydenum (Mo)
0.02% Zinc (Zn)
Physical Properties:
Granular solid fertiliser, surface-treated,
100% polymer-coated, in cone form
Controlled nutrient release:
The nutrients are released out of the coated granules via diffusion influenced by moisture and
temperature.
The product lasts 5 - 6 months under temperate conditions.
Recommendations for use:
Basacote Tabs 6 month K (11-3.9-15.8) contains all nutrients required for healthy growth of plants.
As a result, additional fertiliser applications are not necessary. Application into substrate is
recommended directly before use (maximum storage time 10 days). Distribute the Cones evenly
when potting; press the Cones approximately 3 centimetres into the substrate when topdressing.
The amount of Basacote Tabs 6 month K (11-3.9-15.8) applied will vary according to usage pattern,
desired outcome and seasonal influences such as temperature and wet conditions but the below
rates are given as a guide. These recommendations are given as a practical guide to good
agronomic practice under most situations. Local agronomic conditions should also be taken into
account, as these may affect responsiveness of fertiliser application
Suggested application:
Volume in Litres
Rate Cones / pot 2 3 4 5
Container Nursery Stock 1 2 3 3
Potplants 1 2 2 3
The rates are based on potting media not containing added fertilisers and mature plants. One has to
account for nutrients in readymade potting media or soils. Half of the above rates are suggested for
young plants.
For more detailed instructions contact your local Basacote Plus agent.
Size:
Approx 7.5g each
Storage Notes:
Store Basacote Tab 6 month K (11-3.9-15.8) in a dry location protected from frost, heat and direct
sunlight in the bucket tightly sealed.
A 7.5 g Cone of Basacote Tabs 6 month K (11-3.9-15.8) contains
0.9 g Nitrogen (N)
0.3 g Phosphorus (P)
1.2 g Potassium (K)
0.1 g Magnesium (Mg)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Basacote ® Plus 9 month (16-3.5-10)
TECHNICAL DATA
Primary Nutrients:
16.0% Nitrogen (N)
7.4% NO 3 Nitrogen
8.6% NH 4 Nitrogen
3.5% Phosphorus (P) soluble in neutral ammonium citrate
2.4% P water soluble
10.0% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.2% Magnesium (Mg)
0.8% water soluble
5.0% Sulphur (S)
4.0% water soluble
0.02% Boron (B)
0.05% Copper (Cu)
0.4% Iron (Fe)
0.06% Manganese (Mn)
0.015% Molydenum (Mo)
0.02% Zinc (Zn)
Physical Properties:
Granular solid fertiliser, surface-treated,
100% polymer-coated
Granulometry:
Min. 90% 2.0 - 4.0 mm
Bulk Density:
Approx. 1100 kg/m 3
Controlled nutrient release:
The nutrients are released out of the coated granules via diffusion influenced by moisture and
temperature.
The product lasts 8 - 9 months under temperate conditions.
Recommendations for application:
Basacote Plus 9 month (16-3.5-10) contains all nutrients required for healthy growth of plants. As a
result, additional fertiliser applications are not necessary. Mixing into substrate is recommended
directly before use (maximum storage time 10 days).
The amount of Basacote Plus 9 month (16-3.5-10) applied will vary according to usage pattern,
desired outcome and seasonal influences such as temperature and wet conditions but the below
rates are given as a guide. These recommendations are given as a practical guide to good
agronomic practice under most situations. Local agronomic conditions should also be taken into
account, as these may affect responsiveness of fertiliser application
Suggested application:
Nutrient Requirement
Rate in g/l or kg/m 3 Low Medium High
Substrate fertiliser for tree nurseries 2.5 - 3.5 3.5 - 4.5 4.5 - 6.0
Shrubs & Cover Crops 1.0 - 2.0 2.0 - 3.0 2.0 - 3.0
Cutflowers 6.0 - 12.0 kg/100m 2
Landscaping applications;
Tree & Shrub planting 150 - 200 g/m 2 or 2.0 - 3.0 kg/m 2
Public green 60 - 100 g/m 2 or 3.0 - 4.0 kg/m 2
The rates are based on potting media not containing added fertilisers and mature plants. One has to
account for nutrients in readymade potting media or soils. Half of the above rates are suggested for
young plants.
For more detailed instructions contact your local Basacote Plus agent.
Colour:
Green
Storage Notes:
Store Basacote Plus 9 month (16-3.5-10) in a dry location protected from frost, heat and direct
sunlight.
A 25kg bag of Basacote Plus 9 month (16-3.5-10) contains
4.0 kg Nitrogen (N)
0.9 kg Phosphorus (P)
2.5 kg Potassium (K)
0.3 kg Magnesium (Mg)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Basacote ® Plus
9 month K (11-3.9-15.8)
TECHNICAL DATA
Primary Nutrients:
11.0% Nitrogen (N)
4.5% NO 3 Nitrogen
6.5% NH 4 Nitrogen
3.9% Phosphorus (P) soluble in neutral ammonium citrate
3.1% P water soluble
15.8% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.2% Magnesium (Mg)
0.8% water soluble
7.0% Sulphur (S)
6.0% water soluble
0.02% Boron (B)
0.05% Copper (Cu)
0.23% Iron (Fe)
0.06% Manganese (Mn)
0.015% Molydenum (Mo)
0.02% Zinc (Zn)
Physical Properties:
Granular solid fertiliser, surface-treated,
100% polymer-coated
Controlled nutrient release:
The nutrients are released out of the coated granules via diffusion influenced by moisture and
temperature.
The product lasts 8 - 9 months under temperate conditions.
Recommendations for use:
Basacote Plus 9 month K (11-3.9-15.8) contains all nutrients required for healthy growth of plants.
As a result, additional fertiliser applications are not necessary. Mixing into substrate is recommended
directly before use (maximum storage time 10 days).
The amount of Basacote Plus 9 month K (11-3.9-15.8) applied will vary according to usage pattern,
desired outcome and seasonal influences such as temperature and wet conditions but the below
rates are given as a guide. These recommendations are given as a practical guide to good
agronomic practice under most situations. Local agronomic conditions should also be taken into
account, as these may affect responsiveness of fertiliser application
Suggested application:
Nutrient Requirement
Rate in g/l or kg/m 3 Low Medium High
Container nursery stock 2.5 - 3.5 3.5 - 4.5 4.5 - 6.0
Potplants 2.5 - 3.5 3.5 - 4.5 4.5 - 6.0
The rates are based on potting media not containing added fertilisers and mature plants. One has to
account for nutrients in readymade potting media or soils. Half of the above rates are suggested for
young plants.
For more detailed instructions contact your local Basacote Plus agent.
Granulometry:
Min. 90% 2.0 - 4.0 mm
Bulk Density:
Approx. 1100 kg/m 3
Colour:
Reddish-olive
Storage Notes:
Store Basacote Plus 9 month K (11-3.9-15.8) in a dry location protected from frost, heat and
direct sunlight.
A 25kg bag of Basacote Plus 9 month K (11-3.9-15.8) contains
2.8 kg Nitrogen (N)
0.4 kg Phosphorus (P)
2.5 kg Potassium (K)
0.3 kg Magnesium (Mg)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Basacote ® Plus 12 month (15-3.5-10)
TECHNICAL DATA
Primary Nutrients:
15.0% Nitrogen (N)
7.0% NO 3 Nitrogen
8.0% NH 4 Nitrogen
3.5% Phosphorus (P) soluble in neutral ammonium citrate
2.4% P water soluble
10.0% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.2% Magnesium (Mg)
0.8% water soluble
5.0% Sulphur (S)
4.0% water soluble
0.02% Boron (B)
0.05% Copper (Cu)
0.4% Iron (Fe)
0.06% Manganese (Mn)
0.015% Molydenum (Mo)
0.02% Zinc (Zn)
Controlled nutrient release:
The nutrients are released out of the coated granules via diffusion influenced by moisture and
temperature.
The product lasts 10 - 12 months under temperate conditions.
Recommendations for use:
Basacote Plus 12 month (15-3.5-10) contains all nutrients required for healthy growth of plants.
As a result, additional fertiliser applications are not necessary. Mixing into substrate is recommended
directly before use (maximum storage time 10 days).
Suggested application:
Nutrient Requirement
Rate in g/l or kg/m 3 Low Medium High
Substrate fertiliser for tree nurseries 2.5 - 3.5 3.5 - 4.5 4.5 - 6.0
Landscaping applications;
Tree & Shrub planting 150 - 200 g/m 2 or 2.0 - 3.0 kg/m 2
The rates are based on potting media not containing added fertilisers and mature plants. One has to
account for nutrients in readymade potting media or soils. Half of the above rates are suggested for
young plants.
For more detailed instructions contact your local Basacote Plus agent.
Physical Properties:
Granular solid fertiliser, surface-treated,
100% polymer-coated
Granulometry:
Min. 90% 2.0 - 4.0 mm
Bulk Density:
Approx. 1100 kg/m 3
Colour:
Green
Storage Notes:
Store Basacote Plus 12 month (15-3.5-10) in a dry location protected from frost, heat and
direct sunlight.
A 25kg bag of Basacote Plus 12 month (15-3.5-10) contains
4.0 kg Nitrogen (N)
0.9 kg Phosphorus (P)
2.5 kg Potassium (K)
0.3 kg Magnesium (Mg)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Floranid ® Club
TECHNICAL DATA
Primary Nutrients:
10.0% Nitrogen (N)
1.2% NO 3 Nitrogen
2.8% NH 4 Nitrogen
6.0% Isobutylidene diurea nitrogen (Isodur)
2.2% Phosphorus (P) soluble in neutral ammonium citrate
1.3% P water soluble
16.6% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
2.4% Magnesium (Mg)
0.9% water soluble
8.0% Sulphur (S)
6.4% water soluble
0.01% Boron (B)
0.01% Copper (Cu)
0.5% Iron (Fe)
0.01% Manganese (Mn)
0.01% Zinc (Zn)
Physical Properties:
Finely granulated fertiliser
Granulometry:
Min. 90% 0.7 - 2.8 mm
Bulk Density:
Approx. 1050 kg/m 3
Colour:
Reddish-brown
Storage Notes:
In unopened original containers or bags Floranid Club can be stored for longer periods of time.
Opened containers or bags should be resealed tightly after removal of fertiliser and be stored in a dry
place.
Recommendations for application:
Floranid Club is a complete slow release fertiliser with a broad field of use in turf, landscaping and
horticulture. The ammonium and nitrate content of Floranid Club supplies the immediate and short
term demand for nitrogen. Isodur (IBDU) ensures thereafter a continuous supply of nitrogen over 8-
12 weeks, depending on the climatic conditions. This supply of nitrogen therefore enables constant
and consistent plant growth under normal circumstances.
The very high potassium and magnesium content of Floranid Club makes this product an ideal
choice for use on soils with low magnesium and potassium levels. Adequate supplies of magnesium
and potassium promote healthy growth, and generally increase the resistance of plants to disease.
Thanks to its fine granulation Floranid Club can be applied evenly with spreaders or by hand. For use
as basal dressing as well as for maintenance, especially recommended for autumn and winter
application.
There is no risk of burning at the rates recommended if applied on dry crops. However, one should
avoid spreading granules on leaves of sensitive plants. Irrigation, whilst not essential after application,
promotes the starter effect. The fine granules enter well into the sward and break down with
moisture and irrigation after a short period of time.
Application rates:
kg/100 m 2 g/m 2 Applications per year.
Turf
sports fields 4 - 6 40 - 60 1 - 3
golf fairways 4 - 5 40 - 50 1 - 2
public green 3 - 4 30 - 40 1 - 2
playing grounds 4 - 6 40 - 60 1
seeding bed 5 - 7 50 - 70 1
Ornamentals
Yearly flowers 4 - 6 40 - 60 1 - 2
Shrubs 3 - 6 30 - 60 1 - 2
roses, ornamental plants 5 - 8 50 - 80 1 - 2
Wood
plantation, newly established 6 - 8 60 - 80 1
land planting, seeds 4 - 6 40 - 60 1
top dressing 3 - 5 30 - 50 2
Tree nursery
nursery bed 4 - 5 40 - 50 1 - 2
A 25kg bag of Floranid Club contains
2.5 kg Nitrogen (N)
0.6 kg Phosphorus (P)
4.2 kg Potassium (K)
0.6 kg Magnesium (Mg)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Floranid ® Eagle
TECHNICAL DATA
Primary Nutrients:
24.0% Nitrogen (N)
3.0% NO 3 Nitrogen
1.0% NH 4 Nitrogen
5.3% Urea Nitrogen
14.7% Isobutylidene diurea nitrogen (Isodur)
2.2% Phosphorus (P) soluble in neutral ammonium citrate
1.3% P water soluble
8.3% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.0% Iron (Fe)
0.5% Manganese (Mn)
Physical Properties:
Granular solid fertiliser, surface-treated treated for improved handling and storage
Granulometry:
Min. 90% 0.5 - 1.4 mm
Bulk Density:
Approx. 900 kg/m 3
Colour:
Grey
Storage Notes:
In unopened original containers or bags Floranid Eagle can be stored for longer periods of time.
Improper storage (e.g. humidity) may cause the product to cake. However, this does not influence
the chemical properties of the fertiliser. Reseal opened containers or bags tightly after removal of
fertiliser and store in a dry place.
Recommendations for application:
Floranid Eagle is a complete slow release fertiliser with a broad field of use in high-value sports turf.
The ammonium and nitrate content of Floranid Eagle supplies the immediate and short term demand
for nitrogen. Isodur (IBDU) ensures thereafter a continuous supply of nitrogen over 8-12 weeks,
depending on the climatic conditions. This supply of nitrogen therefore enables constant and
consistent plant growth under normal circumstances.
The granule size is very fine and consequently ideal for low-cut turf and it is possible to be applied
during the whole vegetative period. The recommended rates do not bear the risk of scorching.
Watering-in is not obligatory, nevertheless promotes the immediate effect. The fine granules enter
well into the sward and decompose with moisture or irrigation already after a short period of time.
Application rates:
Area kg/100m 2 g/m 2 Applications per year.
Golf greens 2 - 4 20 - 40 4 - 6
Tees 2 - 4 20 - 40 3 - 4
Sports fields 2 - 4 20 - 40 2 - 3
Cool Season Grasses Nitrogen Desired Application Rate (g/m 2 )
25 11
40 * 17
50 21
Warm Season Grasses Nitrogen Desired Application Rate (g/m 2 )
30 13
45 * 19
60 25
* Recommended Rate for Australia
A 25kg bag of Floranid Eagle contains
6.0 kg Nitrogen (N)
0.6 kg Phosphorus (P)
2.0 kg Potassium (K)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Floranid ® Eagle K
TECHNICAL DATA
Primary Nutrients:
12.0% Nitrogen (N)
1.2% NH 4 Nitrogen
3.6% Urea Nitrogen
7.2% Isobutylidene diurea nitrogen (Isodur)
2.6% Phosphorus (P) soluble in neutral ammonium citrate
1.7% P water soluble
19.9% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
0.4% Iron (Fe)
0.2% Manganese (Mn)
Physical Properties:
Granular solid fertiliser, surface-treated for improved handling and storage
Granulometry:
Min. 90% 0.5 - 1.4 mm
Bulk Density:
Approx. 800 kg/m 3
Colour:
Grey
Storage Notes:
In unopened original containers or bags Floranid Eagle K can be stored for longer periods of time.
Improper storage (e.g. humidity) may cause the product to cake. However, this does not influence
the chemical properties of the fertiliser. Reseal opened containers or bags tightly after removal of
fertiliser and store in a dry place.
Recommendations for application:
Floranid Eagle K is a complete slow release fertiliser with a broad field of use in high-value sports
turf. The ammonium content of Floranid Eagle K supplies the short term demand for nitrogen. Isodur
(IBDU) ensures thereafter a continuous supply of nitrogen over 8-12 weeks, depending on the
climatic conditions. This supply of nitrogen therefore enables constant and consistent plant growth
under normal circumstances.
The high potassium content is adapted to sand-based golf greens and sports fields with a low cation
exchange capacity. The trace elements - iron and manganese - ensure optimal growth especially
under these conditions.
The granule size is very fine and consequently ideal for low-cut turf and it is possible to be applied
during the whole vegetative period. The recommended rates do not bear the risk of scorching.
Watering-in is not obligatory, nevertheless promotes the immediate effect. The fine granules enter
well into the sward and decompose with moisture or irrigation already after a short period of time.
Application rates:
Area kg/100m 2 g/m 2 Applications per year.
Golf greens 3 - 5 30 - 50 4 - 6
Tees 3 - 5 30 - 50 3 - 4
Other high value turf 3 - 5 30 - 50 2 - 3
Cool Season Grasses Nitrogen Desired Application Rate (g/m 2 )
25 21
40 * 34
50 42
Warm Season Grasses Nitrogen Desired Application Rate (g/m 2 )
30 25
45 * 38
60 50
* Recommended Rate for Australia
A 25kg bag of Floranid Eagle K contains
3.0 kg Nitrogen (N)
0.7 kg Phosphorus (P)
5.0 kg Potassium (K)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Floranid ® Eagle NK
TECHNICAL DATA
Primary Nutrients:
20.0% Nitrogen (N)
5.0% NO 3 Nitrogen
4.3% Urea Nitrogen
10.7% Isobutylidene diurea nitrogen (Isodur)
16.6% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.8% Magnesium (Mg)
1.8% water soluble
3.0% Sulphur (S),
3.0% water soluble
0.5% Iron (Fe)
0.25% Manganese (Mn)
Physical Properties:
Granular solid fertiliser, surface-treated for improved handling and storage
Granulometry:
Min. 90% 0.5 - 1.4 mm
Bulk Density:
Approx. 900 kg/m 3
Colour:
Brownish
Storage Notes:
In unopened original containers or bags Floranid Eagle NK can be stored for longer periods of time.
Improper storage (e.g. humidity) may cause the product to cake. However, this does not influence
the chemical properties of the fertiliser. Reseal opened containers or bags tightly after removal of
fertiliser and store in a dry place.
Recommendations for application:
Floranid Eagle NK is a complete slow release fertiliser with a broad field of use in high-value sports
turf. The urea and nitrate content of Floranid Eagle NK supplies the immediate and short term
demand for nitrogen. Isodur (IBDU) ensures thereafter a continuous supply of nitrogen over 8-12
weeks, depending on the climatic conditions. This supply of nitrogen therefore enables constant and
consistent plant growth under normal circumstances.
The high potassium and magnesium content are adapted to sand-based golf greens and sports
fields with a low cation exchange capacity. The trace elements - iron and manganese - ensure
optimal growth especially under these conditions.
The granule size is very fine and consequently ideal for low-cut turf and it is possible to be applied
during the whole vegetative period. The recommended rates do not bear the risk of scorching.
Watering-in is not obligatory, nevertheless promotes the immediate effect. The fine granules enter
well into the sward and decompose with moisture or irrigation already after a short period of time.
Application rates:
Area kg/100m 2 g/m 2 Applications per year.
Golf greens 2 - 4 20 - 40 4 - 6
Tees 3 - 4 30 - 40 3 - 4
Sports fields 3 - 5 30 - 50 2 - 3
Cool Season Grasses Nitrogen Desired Application Rate (g/m 2 )
25 13
40 * 20
50 25
Warm Season Grasses Nitrogen Desired Application Rate (g/m 2 )
30 15
45 * 23
60 30
* Recommended Rate for Australia
A 25kg bag of Floranid Eagle NK contains
5.0 kg Nitrogen (N)
4.2 kg Potassium (K)
0.5 kg Magnesium (Mg)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Floranid ® Eagle Start
TECHNICAL DATA
Primary Nutrients:
18.0% Nitrogen (N)
1.6% NO 3 Nitrogen
4.8% NH 4 Nitrogen
5.0% Urea Nitrogen
6.6% Isobutylidene diurea nitrogen (Isodur)
10.5% Phosphorus (P) soluble in neutral ammonium citrate
7.0% P water soluble
4.2% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.0% Iron (Fe)
0.5% Manganese (Mn)
Physical Properties:
Granular solid fertiliser, surface-treated for improved handling and storage
Granulometry:
Min. 90% 0.5 - 1.4 mm
Bulk Density:
Approx. 900 kg/m 3
Colour:
Grey
Storage Notes:
In unopened original containers or bags Floranid Eagle Start can be stored for longer periods of time.
Improper storage (e.g. humidity) may cause the product to cake. However, this does not influence
the chemical properties of the fertiliser. Reseal opened containers or bags tightly after removal of
fertiliser and store in a dry place.
Recommendations for application:
Floranid Eagle Start is a complete slow release fertiliser with a broad field of use in high-value sports
turf at establishment and/or renovation time. The ammonium and nitrate content of Floranid Eagle
Start supplies the immediate and short term demand for nitrogen. Isodur (IBDU) ensures thereafter a
continuous supply of nitrogen over 8-12 weeks, depending on the climatic conditions. This supply of
nitrogen therefore enables constant and consistent plant growth under normal circumstances.
The granule size is very fine and consequently ideal for low-cut turf and it is possible to be applied
during the whole vegetative period. The high level of phosphorus in Floranid Eagle Start promotes
root growth in high-value sports turf at establishment and/or renovation time. The recommended
rates do not bear the risk of scorching. Watering-in is not obligatory, nevertheless promotes the
immediate effect. The fine granules enter well into the sward and decompose with moisture or
irrigation already after a short period of time.
Rates for application:
Area kg/100m 2 g/m 2 Applications per year.
Golf greens 2 - 4 20 - 40 for establishment
Tees 3 - 4 30 - 40 and turf
Sports fields 3 - 5 30 - 50 renovation
Cool Season Grasses Nitrogen Desired Application Rate (g/m 2 )
25 14
40 * 23
50 28
Warm Season Grasses Nitrogen Desired Application Rate (g/m 2 )
30 17
45 * 26
60 34
* Recommended Rate for Australia
A 25kg bag of Floranid Eagle Start contains
3.0 kg Nitrogen (N)
0.7 kg Phosphorus (P)
5.0 kg Potassium (K)
5.0 kg Magnesium (Mg)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Floranid ® Master
TECHNICAL DATA
Primary Nutrients:
16.0% Nitrogen (N)
1.0% NO 3 Nitrogen
5.0% NH 4 Nitrogen
10.0% Isobutylidene diurea nitrogen (Isodur)
2.2% Phosphorus (P) soluble in neutral ammonium citrate
1.3% P water soluble
8.3% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
3.0% Magnesium (Mg)
1.8% water soluble
8.0% Sulphur (S),
6.4% water soluble
0.01% Boron (B)
0.01% Copper (Cu)
0.5% Iron (Fe)
0.01% Manganese (Mn)
0.01% Zinc (Zn)
Physical Properties:
Granular solid fertiliser, surface-treated for improved handling and storage
Granulometry:
Min. 90% 0.5 - 2.0 mm
Bulk Density:
Approx. 920 kg/m 3
Colour:
Grey
Storage Notes:
In unopened original containers or bags Floranid Master can be stored for longer periods of time.
Improper storage (e.g. humidity) may cause the product to cake. However, this does not influence
the chemical properties of the fertiliser. Reseal opened containers or bags tightly after removal of
fertiliser and store in a dry place.
Recommendations for application:
Floranid Master is a complete slow release fertiliser with a broad field of use in high-value sports turf.
The ammonium and nitrate content of Floranid Master supplies the immediate and short term
demand for nitrogen. Isodur (IBDU) ensures thereafter a continuous supply of nitrogen over 8-12
weeks, depending on the climatic conditions. This supply of nitrogen therefore enables constant and
consistent plant growth under normal circumstances.
The high potassium content is adapted to sand-based golf greens and sports fields with a low cation
exchange capacity. The complete set of trace elements - iron, boron, copper, manganese and zinc -
ensure optimal growth especially under these conditions.
Floranid Master is specially formulated for fine turf. The granule size is particularly fine (0.5-1.5mm).
Floranid Master contains a high nitrogen content in the slow release form (63%) and is additionally
fortified with iron (0.5%) to improve turf colour and tolerance to wear. Floranid Master minimises the
effect of the turf flushing after fertiliser use.
The granule size is very fine and consequently ideal for low-cut turf and it is possible to be applied
evenly with spreaders or by hand during the whole vegetative period. The recommended rates do
not bear the risk of scorching. Watering-in is not obligatory, nevertheless promotes the immediate
effect. The fine granules enter well into the sward and decompose with moisture or irrigation already
after a short period of time.
Application rates:
Area kg/100m 2 g/m 2 Applications per year.
Golf greens 3 - 4 30 - 40 4 - 5
Tees 4 - 6 40 - 60 2 - 3
Sports turf 5 - 6 50 - 60 2 - 3
Ornamental turf 4 - 5 40 - 50 1 - 3
Cool Season Grasses Nitrogen Desired Application Rate (g/m 2 )
25 16
40* 25
50 31
Warm Season Grasses Nitrogen Desired Application Rate (g/m 2 )
30 19
45 * 26
60 38
* Recommended Rate for Australia
A 25kg bag of Floranid Master contains
4.0 kg Nitrogen (N)
0.6 kg Phosphorus (P)
2.0 kg Potassium (K)
0.8 kg Magnesium (Mg)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Floranid ® Master Extra
TECHNICAL DATA
Primary Nutrients:
19.0% Nitrogen (N)
2.5% NO 3 Nitrogen
8.0% NH 4 Nitrogen
8.5% Isobutylidene diurea nitrogen (Isodur)
2.2% Phosphorus (P) soluble in neutral ammonium citrate
1.3% P water soluble
8.3% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.2% Magnesium (Mg)
1.2% water soluble
8.0% Sulphur (S)
6.4% water soluble
0.01% Boron (B)
0.002% Copper (Cu)
0.50% Iron (Fe)
0.01% Manganese (Mn)
0.002% Zinc (Zn)
Recommendations for application:
Floranid Master Extra is a complete slow release fertiliser with a broad field of use in high-value
sports turf. The ammonium and nitrate content of Floranid Master Extra supplies the immediate and
short term demand for nitrogen. Isodur (IBDU) ensures thereafter a continuous supply of nitrogen
over 8-12 weeks, depending on the climatic conditions. This supply of nitrogen therefore enables
constant and consistent plant growth under normal circumstances.
The high potassium content is adapted to sand-based golf greens and sports fields with a low cation
exchange capacity. The complete set of trace elements - iron, boron, copper, manganese and zinc -
ensure optimal growth especially under these conditions.
The granule size is very fine and consequently ideal for low-cut turf and it is possible to be applied
evenly with spreaders or by hand during the whole vegetative period. The recommended rates do
not bear the risk of scorching. Watering-in is not obligatory, nevertheless promotes the immediate
effect. The fine granules enter well into the sward and decompose with moisture or irrigation already
after a short period of time.
Application rates:
Area kg/100m 2 g/m 2 Applications per year.
Golf greens 2 - 4 20 - 40 4 - 6
Tees 3 - 4 30 - 40 3 - 4
Sports fields 3 - 5 30 - 50 2 - 3
Physical Properties:
Granular solid fertiliser, surface-treated for improved handling and storage
Granulometry:
Min. 90% 0.5 - 1.8 mm
Bulk Density:
Approx. 900 kg/m 3
Colour:
Brownish
Storage Notes:
In unopened original containers or bags Floranid Master Extra can be stored for longer periods of
time. Improper storage (e.g. humidity) may cause the product to cake. However, this does not
influence the chemical properties of the fertiliser. Reseal opened containers or bags tightly after
removal of fertiliser and store in a dry place.
A 25kg bag of Floranid Master Extra contains
4.8 kg Nitrogen (N)
0.6 kg Phosphorus (P)
2.0 kg Potassium (K)
0.3 kg Magnesium (Mg)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Floranid ® N 32%
Technical data
Primary Nutrients:
32.0% Nitrogen (N)
4.0% NH 4 Nitrogen
28.0% Isobutylidene diurea nitrogen (Isodur)
Physical Properties:
Finely granulated fertiliser, surface-treated for improved handling and storage properties.
Granulometry:
Min. 90% 0.7 - 2.8 mm
Bulk Density:
Approx. 520 kg/m 3
Colour:
White
Storage Notes:
In unopened original containers or bags Floranid N32% can be stored for longer periods of time.
Improper storage (e.g. humidity) may cause the product to cake. However, this does not influence
the chemical properties of the fertiliser. Reseal opened containers or bags tightly after removal of
fertiliser and store in a dry place.
A 25kg bag of Floranid N32% contains
8.0 kg Nitrogen (N)
Recommendations for application:
Floranid N32% is a straight N slow release fertiliser with use in turf and ornamental production.
Isodur-N (IBDU) is the key component of Floranid N 32% with a share of approx. 90% of the
Nitrogen-fraction. The high Isodur content in combination with the immediately plant-available
nitrogen ensures a starter effect and an even slow release effect over several months (2 - 4
depending on the weather conditions). Floranid N 32% is therefore especially suited for areas where
leaching into deeper horizons shall be avoided. Floranid N 32% does not supply any salt-active
materials and consequently does not result in burning even with relatively high quantities.
Thanks to its fine granulation Floranid N 32% can be applied evenly with spreaders or by hand as a
basal dressing and/or for maintenance. There is no risk of burning at the rate recommended if
applied on dry crops. However, one should avoid spreading granules on leaves of sensitive plants.
Application rates:
Crop kg per 100 m 2
Sports turf 3 - 6
Ornamental lawns 3 - 4
Ornamental shrubs
(slow growing) 1 - 2
(fast growing) 3 - 4
Ornamental flowers 2 - 4
Cut flowers 3 - 5
Apply Floranid N32% onto dry crops (turf: 2 to 3 days after mowing); subsequent irrigation will help
to get the fertiliser into the root zone.
Cool Season Grasses Nitrogen Desired Application Rate (g/m 2 )
25 8
40 * 12
50 16
Warm Season Grasses Nitrogen Desired Application Rate (g/m 2 )
30 9
45 * 14
60 18
* Recommended Rate for Australia
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Floranid ® NK
TECHNICAL DATA
Primary Nutrients:
14.0% Nitrogen (N)
3.0% NO 3 Nitrogen
6.0% NH 4 Nitrogen
5.0% Isobutylidene diurea nitrogen (Isodur)
15.7% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.8% Magnesium (Mg)
0.9% water soluble
10.0% Sulphur (S)
8.0% water soluble
Physical Properties:
Granular complex mineral fertiliser of surface-treated for improved handling and storage properties.
Granulometry:
Min. 90% 0.7 - 2.8 mm
Bulk Density:
Approx. 990 kg/m 3
Colour:
Light yellow
Storage Notes:
In unopened original containers or bags Floranid NK can be stored for longer periods of time.
Opened containers or bags should be resealed tightly after removal of fertiliser and be stored in a dry
place.
A 25kg bag of Floranid NK contains
3.5 kg Nitrogen (N)
4.0 kg Potassium (K)
0.5 kg Magnesium (Mg)
Recommendations for application:
Floranid NK is a complete slow release fertiliser with a broad field of use in turf, landscaping and
horticulture. The ammonium and nitrate content of Floranid NK supplies the immediate and short
term demand for nitrogen. Isodur (IBDU) ensures thereafter a continuous supply of nitrogen over 8-
12 weeks, depending on the climatic conditions. This supply of nitrogen therefore enables constant
and consistent plant growth under normal circumstances.
The potassium and magnesium content of Floranid NK makes this product an ideal choice for use
on soils with low magnesium and potassium levels or low cation exchange capacity. Adequate
supplies of magnesium and potassium promote healthy growth, and generally increase the
resistance of plants to disease. Floranid NK has been especially developed for soils with high
phosphorus reserves.
Floranid NK can be uniformly applied both by hand and by spreader. As a rule 2 to 3 dressings
during the vegetative period are sufficient.
Application rates:
kg/100 m 2 number of dressings kg N/ha
per dressing per crop/season
Turf
Public areas, parks 4 - 6 1 approx. 70
Playing fields 4 - 6 3 approx. 210
Golf fairways 4 - 6 2 approx. 140
Vegetables
Tomato 6 - 8 2 approx. 200
Cucumber 10 3 - 4 approx. 500
Sweet pepper 8 - 10 2 approx. 250
Lettuce 6 - 8 1 approx. 100
Fruit crops
Strawberry 7 1 approx. 100
Raspberry 7 1 approx. 100
Gooseberry 7 1 approx. 100
Red currant 7 1 approx. 100
Tree nurseries 3 - 7 1 - 2 approx. 105
Cut flowers
Roses 6 2 - 3 approx. 210
Carnation 8 - 10 3 - 4 approx. 440
Chrysanthemum 8 - 10 2 approx. 250
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Floranid ® Turf
TECHNICAL DATA
Primary Nutrients:
20.0% Nitrogen (N)
2.5% NO 3 Nitrogen
8.0% NH 4 Nitrogen
9.5% Isobutylidene diurea nitrogen (Isodur)
2.2% Phosphorus (P) soluble in neutral ammonium citrate
1.0% P water soluble
6.6% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.2% Magnesium (Mg)
0.6% water soluble
7.0% Sulphur (S)
5.6% water soluble
0.01% Boron (B)
0.002% Copper (Cu)
0.3% Iron (Fe)
0.01% Manganese (Mn)
0.002% Zinc (Zn)
Physical Properties:
Granular complex mineral fertiliser, surface-treated for improved handling and storage properties.
Granulometry:
Min. 90% 0.7 - 2.8 mm
Bulk Density:
Approx. 880 kg/m 3
Colour:
Light green
Storage Notes:
In unopened original containers or bags Floranid Turf can be stored for longer periods of time.
Opened containers or bags should be resealed tightly after removal of fertiliser and be stored in a
dry place.
Recommendations for application:
Floranid Turf is a complete slow release fertiliser and contains an ideal nutrient ratio for turf of
medium to high intensity. The ammonium and nitrate content of Floranid Turf supplies the immediate
and short term demand for nitrogen. Isodur (IBDU) ensures thereafter a continuous supply of
nitrogen over 8-12 weeks, depending on the climatic conditions. This supply of nitrogen therefore
enables constant and consistent plant growth under normal circumstances.
Floranid Turf is a micro-granulated but a larger particle size than Floranid Master. Floranid Turf can be
used on greens and as ideally suited for open thatch, fairway or less dense areas of grass. It is also
ideal for rapid turf regeneration (fairways and tees), Pre-tournament preparation and following
scarification. Floranid Turf provides completely balanced turf nutrition with an emphasis on nitrogen. It
can be uniformly applied both by hand and by spreader. As a rule 2 to 3 dressings during the
vegetative period are sufficient.
Rates of application:
Type of turf Annual nitrogen Spring Summer Autumn
requirement (g/m 2 ) (g/m 2 ) (g/m 2 ) (g/m 2 )
Ornamental lawns, 20 50 --- 50
fairways, parks
Sports grounds subject 24 40 40 40
to medium wear
Sports grounds subject 30 50 50 50
to heavy wear
Sports grounds subject 36 60 60 60
to extreme wear
Golf greens 38 40+40 40+40 30
Cool Season Grasses Nitrogen Desired Application Rate (g/m 2 )
25 13
40 * 20
50 25
Warm Season Grasses Nitrogen Desired Application Rate (g/m 2 )
30 15
45 * 23
60 30
* Recommended Rate for Australia
A 25kg bag of Floranid Turf contains
5.0 kg Nitrogen (N)
0.6 kg Phosphorus (P)
1.7 kg Potassium (K)
0.3 kg Magnesium (Mg)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Nitrophoska ® Slow Release
TECHNICAL DATA
Primary Nutrients:
15.0% Nitrogen (N)
2.5% NO 3 Nitrogen
7.5% NH 4 Nitrogen
5.0% Isobutylidenediurea nitrogen (Isodur)
3.9% Phosphorus (P) soluble in neutral ammonium citrate
2.2% P water soluble
12.5% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.2% Magnesium (Mg)
0.6% water soluble
8.0% Sulphur (S)
6.4% water soluble
0.01% Boron (B)
0.002% Copper (Cu)
0.3% Iron (Fe)
0.01% Manganese (Mn)
0.002% Zinc (Zn)
Physical Properties:
Granular fertiliser, surface-treated for improved handling and storage properties.
Granulometry:
Min. 90% 0.7 - 2.8 mm
Bulk Density:
Approx. 960 kg/m 3
Colour:
Reddish-brown
Storage Notes:
In unopened original containers or bags Nitrophoska Slow Release can be stored for longer periods of
time. Opened containers or bags should be resealed tightly after removal of fertiliser. Nitrophoska Slow
Release should be stored in a dry location protected from frost, heat and direct sunlight.
A 25kg bag of Nitrophoska Slow Release contains
3.8 kg Nitrogen (N)
1.0 kg Phosphorus (P)
3.1 kg Potassium (K)
0.3 kg Magnesium (Mg)
Recommendations for application:
Nitrophoska Slow Release is a complete slow release fertiliser with a broad field of use in turf,
landscaping and horticulture. The ammonium and nitrate content of Nitrophoska Slow Release
supplies the immediate and short term demand for nitrogen. Isodur (IBDU) ensures thereafter a
continuous supply of nitrogen over 8-12 weeks, depending on the climatic conditions. This supply of
nitrogen therefore enables constant and consistent plant growth under normal circumstances. The
potassium and magnesium content promotes healthy growth, and generally makes the plants more
resistant to disease.
Nitrophoska Slow Release can be uniformly applied both by hand and by spreader. Irrigation after
application enhances the starter effect. There is no risk of burning at the rates recommended if
applied on dry crops. However, one should avoid spreading granules on the leaves of sensitive plants.
The amount of Nitrophoska Slow Release applied will vary according to useage pattern, desired
outcome and seasonal influences such as temperature and wet conditions but the below rates are
given as a guide. These recommendations are given as a practical guide to good agronomic practice
under most situations. Local agronomic conditions should also be taken into account, as these may
affect responsiveness of fertiliser application
Application rates:
kg/100 m 2 number of dressings kg N/ha
per dressing per crop/season
Vegetables
Tomato 6 - 8 2 approx. 200
Cucumber 10 3 - 4 approx. 550
Sweet pepper 8 - 10 2 approx. 270
Lettuce 6 - 8 1 approx. 120
Fruit crops
Strawberry 7 1 approx. 100
Raspberry 7 1 approx. 100
Gooseberry 7 1 approx. 100
Red currant 7 1 approx. 100
Tree nurseries 3 - 7 1 - 2 approx. 110
Cut flowers
Roses 6 2 - 3 approx. 300
Carnation 8 - 10 3 - 4 approx. 500
Chrysanthemum 8 - 10 2 approx. 200
Turf
Public areas, parks 4 - 6 1 approx. 75
Playing fields 4 - 6 3 approx. 200
Golf fairways 4 - 6 2 approx. 150
For all substrates and soils with a pH below 5.5 we recommend the use of the reliable slow release
action of Triabon®
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Nitrophoska ® Top 15
TECHNICAL DATA
Primary Nutrients:
15.0% Nitrogen (N)
6.8% NO 3 Nitrogen
8.2% NH 4 Nitrogen
4.3% Phosphorus (P) soluble in neutral ammonium citrate
2.1% water soluble
12.5% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.2% Magnesium (Mg)
0.9% water soluble
6.0% Sulphur (S)
4.8% water soluble
0.02% Boron (B)
0.3% Iron (Fe)
0.01% Zinc (Zn)
Physical Properties:
Granular solid fertiliser, surface-treated,
30% polymer-coated
Granulometry:
Min. 90% 2.0 - 5.0 mm
Bulk Density:
Approx. 1050 kg/m 3
Colour:
Grey
A 25kg bag of Nitrophoska Top 15 contains
3.8 kg Nitrogen (N)
1.0 kg Phosphorus (P)
3.1 kg Potassium (K)
0.3 kg Magnesium (Mg)
Controlled nutrient release:
The nutrients are released in two steps:
1) Starter effect after application under moisture influence. As a result, the relatively high
immediate demand is met.
2) In a second step, the nutrients are released out of the coated granules via diffusion influenced
by moisture and temperature.
Under normal influence and under temperate conditions, the controlled supply lasts two to three
months.
The nutrient supply is linked to temperature, i.e. warm (cold) temperature will reduce (increase) the
longevity. Drought will also inhibit the nutrient supply.
Both effects ensure that nutrient supply is well-adapted to the plant growth factors.
Application:
Thanks to its even granulation and resistant coating Nitrophoska Top 15 can be applied easily with
spreaders or by hand. Nutrient distribution is even as every granule contains all nutrients and
micronutrients. Application is possible during the whole vegetation period.
The recommended rates do not bear the risk of scorching when applied on a dry surface. Wateringin
promotes the immediate effect.
Recommendations for application:
Crop kg/100m 2 no of applications kg N/ha
per dressing per year
Vegetables
Tomato 6 - 8 2 approx. 200
Cucumber 10 3 - 4 approx. 550
Sweet Pepper 8 - 10 2 approx. 270
Lettuce 6 - 8 1 approx. 120
Fruit crops
Strawberry 7 1 approx. 100
Raspberry 7 1 approx. 100
Gooseberry 7 1 approx. 100
Red currant 7 1 approx. 100
Tree nurseries 3 - 7 1 - 2 approx. 110
Cut flowers
Roses 8 2 - 3 approx. 300
Carnation 8 - 10 3 - 4 approx. 500
Chrysanthemum 7 2 approx. 200
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Nitrophoska ® Top 20
TECHNICAL DATA
Primary Nutrients:
20.0% Nitrogen (N)
9.5% NO 3 Nitrogen
10.5% NH 4 Nitrogen
2.1% Phosphorus (P) soluble in neutral ammonium citrate
1.0% P water soluble
8.3% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
1.8% Magnesium (Mg)
2.4% water soluble
5.0% Sulphur (S)
4.0% water soluble
0.02% Boron (B)
0.3% Iron (Fe)
0.02% Zinc (Zn)
Physical Properties:
Granular solid fertiliser, surface-treated,
30% polymer-coated
Granulometry:
Min. 90% 2.0 - 5.0 mm
Bulk Density:
Approx. 1050 kg/m 3
Colour:
Grey
A 25kg bag of Nitrophoska Top 20 contains
5.0 kg Nitrogen (N)
0.5 kg Phosphorus (P)
2.0 kg Potassium (K)
0.5 kg Magnesium (Mg)
Controlled nutrient release:
The nutrients are released in two steps:
1) Starter effect after application under moisture influence. As a result, the relatively high
immediate demand is met.
2) In a second step, the nutrients are released out of the coated granules via diffusion influenced
by moisture and temperature.
Under normal influence and under temperate conditions, the controlled supply lasts two to three
months.
The nutrient supply is linked to temperature, i.e. warm (cold) temperature will reduce (increase) the
longevity. Drought will also inhibit the nutrient supply.
Both effects ensure that nutrient supply is well-adapted to the plant growth factors.
Application:
Thanks to its even granulation and resistant coating Nitrophoska Top 20 can be applied easily with
spreaders or by hand. Nutrient distribution is even as every granule contains all nutrients and
micronutrients. Application is possible during the whole vegetation period.
The recommended rates do not bear the risk of scorching when applied on a dry surface.
Watering-in promotes the immediate effect.
Recommendations for application:
Crop kg/100m 2 no of applications kg N/ha
per dressing per year
Vegetables
Tomato 4 - 6 2 approx. 200
Cucumber 8 3 - 4 approx. 550
Sweet Pepper 6 - 7 2 approx. 270
Lettuce 5 - 7 1 approx. 120
Fruit crops
Strawberry 5 1 approx. 100
Raspberry 5 1 approx. 100
Gooseberry 5 1 approx. 100
Red currant 5 1 approx. 100
Tree nurseries 3 - 4 1 - 2 approx. 110
Cut flowers
Roses 6 2 - 3 approx. 300
Carnation 6 - 8 3 - 4 approx. 500
Chrysanthemum 4 - 6 2 approx. 200
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Nutriforest
TECHNICAL DATA
Primary Nutrients:
9.0% Nitrogen (N)
9.0% NH 4 Nitrogen
10.0% Phosphorus (P) soluble in neutral ammonium citrate
9.2% water soluble
11.6% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
2.4% Magnesium (Mg)
2.4% water soluble
7.0% Sulphur (S)
7.0% water soluble
0.1% Boron (B)
Physical Properties:
Granular solid fertiliser, surface-treated,
50% polymer-coated
Recommendations for application:
Under normal temperate conditions, the controlled supply of nutrients lasts 9 months.
The supply of nutrients is linked to temperature (warm (cold) temperature will reduce (increase) the
longevity) and moisture (minimal moisture will also inhibit the nutrient supply). Both effects ensure that
nutrient supply is well-adapted to the plant growth factors.
Application:
The product should be applied at tree planting in the field. There are 2 possible recommendations for
application.
The fertiliser should be placed on the bottom of the hole and covered with a layer of soil (2-3 cm).
The young tree should be planted on top of the soil layer.
or
The fertiliser should be evenly mixed with the planting soil.
The recommended rates do not bear the risk of scorching when applied as recommended.
Crop
g/tree at planting
Forest trees like
Eucalyptus 30 - 40
Pine 30 - 40
Poplar 30 - 40
Granulometry:
Min. 90% 2.0 - 5.0 mm
Bulk Density:
Approx. 1050 kg/m 3
Colour:
Grey
Controlled nutrient release:
The Nitrogen and Phosphorus are released out of the coated granules via diffusion influenced by
moisture and temperature. Potassium and Magnesium are uncoated.
A 25kg bag of Nutriforest contains
2.3 kg Nitrogen (N)
2.5 kg Phosphorus (P)
2.9 kg Potassium (K)
0.6 kg Magnesium (Mg)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.

Controlled Release Fertilisers
Controlled Release Fertilisers
Triabon ®
TECHNICAL DATA
Primary Nutrients:
16.0% Nitrogen (N)
5.0% NH 4 Nitrogen
11.0% Crotonylidene diurea nitrogen (Crotodur)
3.5% Phosphorus (P) soluble in neutral ammonium citrate
2.6% P water soluble
10.0% Potassium (K) as potassium sulphate, water soluble
Secondary Nutrients:
2.4% Magnesium (Mg),
1.8% water soluble
9.0% Sulphur (S),
7.2% water soluble
0.02% Boron (B)
0.04% Copper (Cu)
0.1% Iron (Fe)
0.1% Manganese (Mn)
0.015% Molybdenum (Mo)
0.007% Zinc (Zn)
Physical Properties:
Granular fertiliser, surface-treated for improved handling and storage properties.
Granulometry:
Min. 90% 1.0 - 4.0 mm
Bulk Density:
Approx. 950 kg/m 3
Colour:
Pale yellow
Storage Notes:
In unopened original bags Triabon can be stored for longer periods of time. Opened bags should be
resealed tightly after removal of fertiliser. Triabon should be stored in a dry location protected from
frost, heat and direct sunlight.
Recommendations for application:
With Crotodur, Triabon contains a slowly flowing source of nitrogen that is effective at every pH.
Triabon contains phosphorus, potassium and other secondary nutrients which makes it an ideal
fertiliser for potted plants and horticultural substrates.
The amount of Triabon applied will vary according to useage pattern, desired outcome and seasonal
influences such as temperature and wet conditions but the below rates are given as a guide. These
recommendations are given as a practical guide to good agronomic practice under most situations.
Local agronomic conditions should also be taken into account, as these may affect responsiveness
of fertiliser application
Application rates
g / litre of substrate (=kg/m 3 )
1. Potted plants
Highly sensitive to salt and/or with low young plants 0.5 - 1.0
nutrient requirement mature plants 1.0 - 2.0
Moderately sensitive to salt and/or with young plants 0.5 - 1.0
average nutrient requirement mature plants 1.5 - 3.0
With high nutrient requirement young plants 1.5 - 2.0
mature plants 3.0 - 3.5
2. Container plants
Conifers young plants 0.5 - 1.0
mature plants 1.5 - 2.5
Foliage trees young plants 0.5 - 1.0
mature plants 2.5 - 3.0
3. Vegetables (potted seedlings)
Lettuce 0.5 - 1.0
Tomato 1.5 - 2.0
Cabbage 1.5 - 2.5
4. Fertilisation of cut flowers
Freesias, gladiolus, gerberas, 6 - 8 kg/100 m 2
Chrysanthemums, carnations, roses 8 - 10 kg/100 m 2
The higher application rates are to be applied to well buffered -e.g. clayey-substrates /soils.
Depending on the crop, 1 - 2 additional topdressings with Triabon may be made.
NOTE: When moist horticultural substrates are being stored for long periods, Triabon should be
added just before use in order to prevent the mineralization process from taking place before it is
required.
A 25kg bag of Triabon contains
4.0 kg Nitrogen (N)
0.9 kg Phosphorus (P)
2.5 kg Potassium (K)
0.6 kg Magnesium (Mg)
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.
Important Information:
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential
loss and damage arising therefrom are not the responsibility of BASF. Always check label before use and heed label instructions.