Mitel SRC Integration Guide - Oaisys

More documents

Recommendations

Info

4. Right-click the selected Level 2 Service select Properties change the startup type to “Automatic” click Apply 5. Press Start to begin running click OK Mitel SRC Integration Guide 5
CONFIGURE MITEL 3300 CTI CONNECTION IN OAISYS 1. Log into the OAISYS Management Studio as a System Administrator 2. Navigate to CTI – Mitel 3300 3. Click Port Settings enter the IP address of the 3300 Controller that OAISYS will connect to click Apply It is necessary to restart the Mitel Level2 Service to activate the connection immediately. 4. Click on Status to ensure the connection is active Mitel SRC Integration Guide 6
Page 1 and 2: Mitel SRC Integration Guide 6/25/20
Page 3 and 4: MITEL SETUP FOR CTI CONNECTION CONF
Page 5: MITEL LEVEL 2 SERVICE IN OAISYS 3.
Page 9 and 10: e operated on the LAN with a centra
Page 11 and 12: 5. Browse to the Mitel Border Gatew
Page 13: 9. Click Save after programming eac

Mitel SRC Integration Guide - Oaisys

Create successful ePaper yourself

Delete template?

Save as template?