AJ4 (J4) TOGGLE SWITCHES - Panasonic Electric Works Europe AG

More documents

Recommendations

Info

AJ4 2. Characteristics Mechanical life Electrical life Insulation distance Insulation resistance Breakdown voltage Contact resistance Vibration resistance Shock resistance Actuator strength (static load) Terminal strength (static load) Ambient temperature Contact material CIRCUIT DIAGRAM Min. 10 5 (20 cpm) See above. (10 cpm) Between grounds: Min. 6 mm, Between poles: Min. 3 mm, Between contacts: Min. 3 mm (ON-OFF and ON-ON type only) Min. 100 MΩ (at 500 V DC measured by insulation resistive meter) ON-OFF and ON-ON type: 2000 Vrms, Other types: 1500 Vrms (at detection current: 10mA) Initial, Max. 10 mΩ (By voltage drop at 1 A, 2 to 4 V DC) 10 to 55 Hz at double amplitude of 1.5 mm (contact opening Max. 10µs) Min. 490 m/s 2 (contact opening Max. 10µs) 112.7N for 1 min. 24.5N for 1 min. –25°C to +85°C (Not freezing below 0°C) AgZnO alloy 1-pole 2-pole 4-pole Terminal arrangement (As seen from terminal side) Keyway Keyway Keyway ON-OFF Keyway Keyway 2-3 2-3, 5-6 1-3, 4-6, 7-9, 10-12 — — — Handle position and contact terminal number ON-ON ON- ON-OFF- -OFF- ON-OFF- Keyway Keyway Keyway Keyway Keyway 2-3 2-3, 5-6 2-3, 5-6, 8-9, 11-12 1-2 1-2, 4-5 1-2, 4-5, 7-8, 10-11 2-3 2-3, 5-6 2-3, 5-6, 8-9, 11-12 — — — 1-2 1-2, 4-5 1-2, 4-5, 7-8, 10-11 Remark ON-OFF type does not have a terminal No. 1. ON-OFF type does not have terminal No. 1 and No. 4. Remark: For ON-, ON-OFF- type, the lever springs back (momentary position) when pushed toward the keyway side. ON-OFF type does not have terminal No. 2, 5, 8 and 11. MOUNTING DIMENSIONS 12.5 dia. 12.5 dia. 12.3 dia. Panel cutout (mm) Panel thickness +0.2 3 0 dia. 9.2 ±0.1 Max. 3.5 mm Remark: For panel installations, be sure to use the back hex nut. Max. 4.0 mm (without keying washer) 1.5 11.5 Max. 4.0 mm (without keying washer) Front hex nut Keying washer Lock washer Back hex nut HANDLE SHAPE (mm) Standard toggle Flat lever 6.1 dia. Turn angle: 24° ±4° 17.5 ±0.4 2.5 dia. Turn angle: 24° ±4° 18 ±0.4 M12 x 1 Keyway 10.9 ±0.4 M12 x 1 Keyway 10.9 ±0.4 94
AJ4 DIMENSIONS (mm) body and terminal shape (For standard toggle) (General tolerance: ±0.5) 1. Solder terminal 1-pole type M12 x 1 1-pole 2-pole 4-pole Turn angle: 24° ±4° 6.1 dia. 17.5 ±0.4 Keyway 10.9 ±0.4 4-pole type 17.6 6.9 7.62 7.62 25.4 2.8 15 7.62 7.62 7.62 7.62 19.5 35 Remarks: For 1-pole, ON-OFF type does not have a terminal No. 1. For 2-pole, ON-OFF type does not have terminal No. 1 and No. 4. For 4-pole, ON-OFF type does not have terminal No. 1, 4, 7 and 10. 2. .110 Quick-connect terminal Turn angle: 1-pole 2-pole 4-pole 24° ±4° 6.1 dia. 17.5 ±0.4 M12 x 1 Keyway 10.9 ±0.4 7.62 17.6 7.1 ±0.15 9.4 5.5 ±0.1 2.8 ±0.1 t = 0.8 ±0.025 7.62 7.62 7.62 25.4 +0 19.5 4–0.15 3-1.2 ±0.05 dia. Hole 15 7.62 7.62 35 Remarks: For 1-pole, ON-OFF type does not have a terminal No. 1. For 2-pole, ON-OFF type does not have terminal No. 1 and No. 4. For 4-pole, ON-OFF type does not have terminal No. 1, 4, 7 and 10. 95
Page 1 and 2: TOGGLE SWITCHES WITH HIGH INRUSH RE
Page 3: AJ4 3. Accessories 1) Installation

AJ4 (J4) TOGGLE SWITCHES - Panasonic Electric Works Europe AG

Create successful ePaper yourself

Delete template?

Save as template?