Instructions for Use, Manual JURA IMPRESSA Z5 - Esperanza

2 Preparing and using your IMPRESSA for the first time
Example: To change the fineness of grind during coffee preparation,
proceed as follows:
T Open the cover of the bean container.
T Place a cup under the coffee spout.
o T Press the Coffee button.
The grinder starts and 1 COFFEE appears on the display.
After this, the coffee strength is briefly displayed.
T Turn the grinding wheel to the desired position while the
grinder is running.
The coffee will be prepared and the fineness of grind is
adjusted.
Switching on
When the IMPRESSA is switched on, a prompt for the rinse operation
automatically appears which is initiated by pressing the maintenance
button c.
This setting can be changed in programming mode so that the
machine automatically activates the switch-on rinse (see Chapter 6
‘Permanent settings in programming mode – Rinses’).
Precondition: Your IMPRESSA is switched on at the power switch
and the On/Off button Q is illuminated (standby).
Q T Press the On/Off button to switch the IMPRESSA on.
WELCOME TO JURA
UNIT IS HEATING
PRESS RINSE, the maintenance button c lights up.
T Place a receptacle under the coffee spout.
c T Press the maintenance button.
The machine rinses itself, stopping automatically.
COFFEE READY appears on the display. Your IMPRESSA
is ready to use.
24