Using a Barcode Scanner with your Connect+ ... - Pitney Bowes

More documents

Recommendations

Info

1. Scan Suffix 2. 1 3. 0 Programming the Barcode Scanner for Use with Connect+ ® Series Systems 4. 0 (continued) 5. 3 3. Scan the following codes in the order shown below to program the suffix/character sequence. 4 Using a Barcode Scanner with Your Connect+® Series System 4
Section 2: How to Use the Combined ZIP Code and Customer Reference Number Barcode Label with Connect+ ® Series Systems The combined ZIP Code and Customer Reference Number barcode label can be used as part of an Electronic Return Receipt (ERR) job. • In order to use ERR, you should have a Bulk Proof of Delivery - Form 5053 on file with the USPS and been given a 9-digit USPS Mailer ID. You will need to enter this number when using ERR. If not, please contact your sales representative. • ERR is available when you use the Attached Scale or Manual Weight entry modes. Follow the steps below to create a job that will allow you to scan the combined barcode label. 1. Place a piece of mail or package on the scale. 2. Select Class from the Job Properties list on the left side of the screen. 3. Select the class from the Class services list box, for example, Priority Mail Commercial. 4. Select the mail piece type, for example, Envelope or package. 5. You are prompted to enter the Destination ZIP or Zone code. Select This is a ZIP. 6. Select the Electronic Certified special service from the Extra services list on the right. As soon as you select the service, a check mark appears in front of it and you are prompted to enter the tracking number. 7. Scan the next tracking label to be used. ◦◦ If you have used all of the labels in a series of tracking number labels, make sure you start with the top label with the lowest last 4-digits and not the bottom label with the highest last 4-digits. 8. Select Next. 9. Select Electronic Return Receipt from the Extra services list. 10. Select Skip and then select OK. 11. Scan the combined barcode label. The Destination ZIP Code and Customer Reference Number will appear in the Job Properties list box on the left side of the screen. 12. Select the Tape button to print a tape. To print postage on the piece of mail, select the Start button. NOTE: If you have accounting on your system, make sure you have selected an account for this job or you will not be able to print postage. 13. The system provides you with the option of automatically printing a receipt after every mail piece. Select the appropriate option to continue. Using a Barcode Scanner with Your Connect+® Series System 5
Page 1 and 2: Using a Barcode Scanner with your C
Page 3: 1. Scan Prefix 2. 1 3. 0 4. 0 Progr

Using a Barcode Scanner with your Connect+ ... - Pitney Bowes

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?