GME™ 131 / AEQ™ 215 User Manual - Peavey.com
GME™ 131 / AEQ™ 215 User Manual - Peavey.com
GME™ 131 / AEQ™ 215 User Manual - Peavey.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ENGLISH<br />
Description<br />
These equalizers are ruggedly constructed audio <strong>com</strong>ponents intended for fixed installation applications.<br />
Engineered with the <strong>com</strong>mercial sound systems contractor in mind, these two rack-space units provide<br />
high-quality audio performance and user friendly controls. Both the GME <strong>131</strong> and the AEQ <strong>215</strong> incorporate<br />
low-noise, low-distortion design, and feature three-screw Euro connectors for ease and versatility of<br />
connection. Both units also offer bypass switches, switchable low-cut filters, and equalizer filters set at<br />
ISO center frequencies within 3% accuracy. Center-detented 45 mm sliders, enclosed in metal for durability,<br />
allow smooth control of boost and cut. If you have a <strong>com</strong>ment about this manual, or would like to make a<br />
suggestion, please write to: <strong>Peavey</strong> Electronics Corp., Architectural Acoustics Division, 711 A St., Meridian, MS<br />
39301. Thank you for using <strong>Peavey</strong>!<br />
Features<br />
GME <strong>131</strong><br />
- Single channel (31 band)<br />
- 1/3 octave filter sets<br />
- 20 Hz to 20 kHz effective equalization range<br />
- Constant Q filters<br />
- 12 dB boost/18 dB cut per band<br />
- Output level LEDs (-12 to +12 dB)<br />
- 24 dB per octave 40 Hz low-cut filter with status LED<br />
- Three-screw Euro input and output connectors<br />
- Bypass switch with status LED<br />
- 15 dB boost/15 dB cut gain control<br />
- FLS ® (Feedback Locating System) circuitry<br />
AEQ <strong>215</strong><br />
- Dual channel (15 bands per channel)<br />
- 2/3 octave filter sets<br />
- 25 Hz to 16 kHz effective equalization range<br />
- Constant Q filters<br />
- 15 dB boost/15 dB cut per octave<br />
- Output level LEDs (-12 to +12 dB)<br />
- 24 dB per octave 40 Hz low-cut filter with status LED<br />
- Three-screw Euro input and output connectors<br />
- Bypass switch with status LED<br />
- 15 dB boost/15 dB cut gain control<br />
4