Cutting and Grinding Discs - LUKAS-ERZETT

More documents

Recommendations

Info

206 Diamondtools Content Product line marking Description Page • Technical Information 207 • Qualities and application 208 • Vacuum-Brazed Diamond Cutting Discs 209 • Diamond Cutting Discs 211 Packing unit: 25 pcs. Ordering example: AS005673 The product lines are additionally marked on the table with the product line heading. Further information on page 14 and 15. • Diamond Cup Wheels 217
Diamondtools 207 Technical Information The Diamond Diamonds are the hardest known material. They are selected depending on the field of application. For diamond blade manufacture synthetic diamonds are solely used. Compared to natural diamonds, their properties are reproducible and controllable. The following quality characteristics are significant for selecting diamonds: • degree of purity • defined breaking strength • sharp edges • consistent geometry Diamonds are classified by quality levels and grain sizes. The Segment The segments consist of diamond embedded metal powder. The metal bond must be suited to the material to be cut. The metal powder consists, for example, of bronze, cobalt, iron, metal carbides, tungsten carbide. The various properties of metal powder provide for sharpness and wear and tear of the segment. Segment coating is carried out by sintering. Therefore, abrasive materials require a hard bond against what hard materials call for soft bond. Vibration Standard Forged segment break Comparison of cutting properties low vibration cutting discs with narrow gaps t Due to the patented forged segment geometry even high segments can be arranged with small gaps in between. This produces considerably lower vibration for the user. Another essential advantage is safety. The dense segments have been forged without any pores. This ensures welding properties which provide much more safety against fracture compared to the usual sintered segments. Forged segment Resistance to fracture [N/mm] • Universal and fast – owing to new types of alloys in the segments • Less vibration – owing to a trapezoid segment geometry X-rays Forged segment Standard EN13236 • More safety – owing to segment feet which are free of pores and provide for the utmost safety • Against a fracture of the segment Standard Welding properties of forged segment: with highest safety against fracture Measured value per segment • Longer life – owing to higher segments and retarded diamond shedding
Page 1 and 2: 163 163 Cutting and Grinding Discs
Page 3 and 4: Cutting and Grinding Discs 165 Tech
Page 5 and 6: Cutting and Grinding Discs 167 Rott
Page 7 and 8: 169 169 Cutting discs Content Produ
Page 9 and 10: Cutting and Grinding Discs 171 Cutt
Page 11 and 12: Cutting discs 173 Thin cutting disc
Page 13 and 14: Cutting discs 175 Cutting discs for
Page 31 and 32: 193 193 Grinding discs Content Prod
Page 33 and 34: Grinding discs 195 Grinding discs f
Page 41 and 42: Cup Wheels 203 Cup wheels for angle
Page 43: Always the right tool The new LUKAS
Page 47 and 48: Vacuum-Brazed Diamond Cutting Disc
Page 49 and 50: Diamond Cutting Disc 211 LD Multi S
Page 51 and 52: Diamond Cutting Disc 213 Blue Cut p
Page 53 and 54: Diamond Cutting Disc 215 ABRASIV S1
Page 55: Diamond Cup Wheels 217 DST HP S5 to

Cutting and Grinding Discs - LUKAS-ERZETT

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?