Test Fixtures - Feinmetall GmbH

Compact fixture with
interface to a test system
For testing single boards or small batches with
an existing test system (e.g. Agilent 3070) the
compact fixture mechanics can be mounted on
a tester interface. This solution allows the use
of small and large interchangeable cassettes in
combination with existing test systems.
→ handle mechanics mounted on tester interface (e.g. Agilent 3070)
→ use of small and large interchangeable cassette possible
→ maximum 255 test points
→ intermediate interface designed for three interface blocks (85-pole)
→ interface realized with contact probes in the fixture and interface pins in the cassettes
→ further options on request (e.g. signal conditioner board for test jet applications etc.)
Compact fixture for larger
boards and higher forces
A stronger design with two combined handle
mechanics allows a higher number of test
points and a test of larger boards. The integrated
interchangeable cassette is brought into the
correct position by twisting an eccentric and
can be changed simply. The internal connection
between cassette and fixture housing is realized
by pylon interface blocks with maximum 340
interconnection points.
→ maximum force 450 N
→ maximum 340 test points
→ adaption to all FEINMETALL-housings possible
→ modular design allows adaption to all common interfaces
→ interface realized with contact probes in the fixture and
interface pins in the cassette
→ further options on request (e.g. HV-protected, lightproof etc.)
7