RK11100-SCOM - RIVA Racing
RK11100-SCOM - RIVA Racing
RK11100-SCOM - RIVA Racing
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Flip connector over and depress connector pin lock.<br />
Place supplied heat shrink over end of wire removed so<br />
end is centered inside sleeve.<br />
Remove brown wire with white stripe & silver bans.<br />
NOTE: Be careful not to dislodge other wires.<br />
Insert white S.C.O.M. wire into ECU connector<br />
completely.<br />
Using a heat gun warm heat shrink until it contracts<br />
around end of wire.<br />
Secure wires by depressing white tabs (2) below<br />
connector locking tab.<br />
Using a small pair of pliers crimp end of heat shrink,<br />
while warm, together to seal. NOTE: Do not crush!<br />
Plug connector into stock ECU.<br />
Remove ECU bracket by pulling forward evenly at push<br />
pins (4)<br />
NOTE: Tabs must be pressed in evenly. Ensure all<br />
wires are installed in connector properly.<br />
Word doc. Part # <strong>RK11100</strong>-<strong>SCOM</strong> © H1 11/25/11 2