SYSTEMS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Established 2003<br />
ENTRANCE PROTECTION<br />
<strong>SYSTEMS</strong>
2<br />
TABLE OF CONTENTS<br />
Introduction & Mission Statement.......... 2<br />
Grid Series 700....................................... 3<br />
Mid-Profile Tread Series 500.................. 4<br />
Low-Profile Tread Series 200.................. 5<br />
Mats Series 300...................................... 6<br />
Mats Series 400...................................... 7<br />
Grille (stainless steel) Series 800............ 8<br />
Reversible Grid Series 900..................... 9<br />
Mat-Tray Series 1000.............................. 10<br />
Colors, insert........................................... 11<br />
BASE MISSION<br />
Our business is helping you, our customer,<br />
866-391-6216<br />
www.base-spec.com<br />
info@base-spec.com<br />
P: 651-463-2273<br />
F: 651-463-2320<br />
keep buildings clean with Base Grid, Tread, Mat or<br />
Grille entrance protection systems. All Base systems<br />
are designed to collect dirt, mud and sand at the<br />
entryway – and to help prevent tracking through the<br />
interior of the building. To that end, we design and<br />
manufacture the exact entry protection product best<br />
suited to your building and application. We offer<br />
the production flexibility of a small manufacturing<br />
company (custom orders welcome). Call us on your<br />
next job. We appreciate the<br />
opportunity to show you why<br />
we say: “BASE – Built to<br />
Serve”.<br />
Ed Green, President<br />
Photos at right show Base Grids, Treads, Mats and<br />
Grilles in a variety of entrance protection applications.<br />
Buildings include banks, libraries, schools, manufacturing<br />
plants, offices, government centers – any building with<br />
foot traffic. Applications may be recessed into the floor,<br />
placed on the floor surface with an inclined perimeter<br />
vinyl frame or surface mounted in a rubber tray.
3<br />
866-391-6216<br />
www.base-spec.com<br />
info@base-spec.com<br />
P: 651-463-2273<br />
F: 651-463-2320<br />
1-3/4" I-Beam<br />
Base Grid<br />
BASE GRID SERIES<br />
GB-700 FOR HEAVY<br />
TRAFFIC AREAS<br />
l Helps keep buildings clean<br />
l Strong – 1-3/4" deep I-beam cross section<br />
l Our strongest entrance system<br />
l Ideal for heavy foot and cart traffic<br />
l Use indoors and out – versatile in<br />
most recess applications<br />
The Base GB-700 Series has a rugged 1-3/4"<br />
I-beam aluminum frame – most rugged and<br />
durable entrance protection system in our<br />
product line. An aluminum cross member<br />
gridlock keeps the grid in place while vinyl<br />
footers cushion foot and cart traffic. See<br />
page 11 for insert types and colors.<br />
GB-700 CARPET<br />
1-1/2"<br />
1/8"<br />
1-3/4"<br />
Ideal for<br />
heavy traffic areas<br />
GB-701 VINYL<br />
1-1/2"<br />
1/8"<br />
1-3/4"<br />
1-1/2"<br />
1-1/2"<br />
1/8"<br />
1/8"<br />
1-3/4"<br />
1-3/4"<br />
GB-702 POLY-BRUSH<br />
GB-704 VINYL ABRASIVE<br />
1-1/2"<br />
1/8"<br />
1-1/2"<br />
1/8"<br />
1-3/4"<br />
1-3/4"<br />
GB-705 SERRATED ALUMINUM<br />
GB-706 SERRATED INSERT<br />
1-1/2"<br />
1/8"<br />
Recessed application<br />
includes optional<br />
2" x 2" x 1/4"<br />
aluminum<br />
frame<br />
FLOOR<br />
SPECIFICATIONS<br />
Subject to change without notice<br />
2"<br />
GRIDLOCK<br />
1-3/4"<br />
Material: 6063-T52 aluminum with various insert options<br />
Depth: Grid only; 1-3/4”<br />
Depth: Grid and frame (level base); 2”<br />
LEED: Possible LEED-NC credits; MR credit 4 (1-2 points);<br />
MR credit 5 (1-2 points); IEQ credit 5 (1 point)<br />
Recycle content: 46% pre-consumer<br />
1/4"<br />
CUSHION CUSHION<br />
L-2 RECESSED FRAME<br />
CONCRETE<br />
2"
4<br />
866-391-6216<br />
www.base-spec.com<br />
info@base-spec.com<br />
P: 651-463-2273<br />
F: 651-463-2320<br />
3/4" Mid-Profile<br />
Base Tread<br />
BASE TREAD SERIES<br />
GB-500 FOR MEDIUM TO<br />
HEAVY TRAFFIC AREAS<br />
l Strongest tread – 3/4” mid-profile tread<br />
l 25% more surface wiping area<br />
l Smooth surface – less wheel bump<br />
l Use indoors and out – versatile in<br />
most recess applications<br />
Heavy<br />
duty<br />
vinyl hinge<br />
roll-up tread<br />
The Base GB-500 Series 3/4” Tread supports heavy<br />
foot and cart traffic – our most rugged and durable<br />
tread. 3/4” aluminum framework assures dimensional<br />
stability and longevity. A vinyl hinge allows<br />
the tread to be rolled up and moved for under-tread<br />
cleaning. A solid 1/8” thick vinyl “T” profile footer<br />
runs the full width and length of each section and<br />
provides a low-impact cushion for all traffic. See<br />
page 11 for insert types and colors.<br />
GB-500 CARPET<br />
1-1/2"<br />
1-1/2"<br />
1/8"<br />
1/8"<br />
5/8"<br />
3/4"<br />
5/8"<br />
3/4"<br />
GB-501 VINYL<br />
1-1/2"<br />
1/8"<br />
5/8"<br />
3/4"<br />
SPECIFICATIONS<br />
Subject to change without notice<br />
Material: Corrosion-resistant 6063-T52 aluminum with various<br />
inserts fusion bonded to backing for durability<br />
Thickness, overall: 3/4”<br />
Additional specs: 6063-T52 aluminum spaced 1-1/2” on center<br />
and connected with rubber hinges with 1/8” slotted holes for<br />
maximum drainage<br />
Weather resistance: Hinges and footpads remain flexible<br />
Rolling load: Up to 1,000 lbs./wheel<br />
LEED: Possible LEED-NC credits; MR credit 4 (1-2 points);<br />
MR credit 5 (1-2 points); IEQ credit 5 (1 point)<br />
Recycle content: 38.3% pre-consumer<br />
GB-502 POLY-BRUSH<br />
GB-504 VINYL ABRASIVE<br />
1-1/2"<br />
1-1/2"<br />
1/8"<br />
1/8"<br />
5/8"<br />
3/4"<br />
1-1/2"<br />
1/8"<br />
FLOOR<br />
5/8"<br />
3/4"<br />
1"<br />
3/4"<br />
GB-505 SERRATED ALUMINUM<br />
1/4"<br />
L-3 RECESSED FRAME<br />
CONCRETE<br />
1"<br />
Recessed application requires use of aluminum frame illustrated at left. The<br />
frame helps create a clean installation with well defined edges and corners.
5<br />
866-391-6216<br />
www.base-spec.com<br />
info@base-spec.com<br />
P: 651-463-2273<br />
F: 651-463-2320<br />
1/2" Low-Profile<br />
Base Tread<br />
BASE TREAD SERIES<br />
GB-200 FOR MEDIUM<br />
TRAFFIC AREAS<br />
l Strong – 1/2” low-profile tread<br />
l 25% more surface wiping area<br />
l Smooth surface – less wheel bump<br />
l Use indoors and out – versatile in<br />
most recess applications<br />
Weather<br />
resistant<br />
vinyl hinge<br />
roll-up tread<br />
The Base GB-200 Series 1/2” Tread supports medium<br />
foot and cart traffic. Provides a barrier against<br />
mud, dirt and soilage. The rugged 1/2” aluminum<br />
framework assures dimensional stability and<br />
longevity, while the vinyl hinge allows the tread to<br />
be rolled up and moved for under-tread cleaning. A<br />
solid 1/8” thick vinyl “T” profile footer runs the full<br />
width and length of each section and provides a<br />
low-impact cushion for all traffic. See page 11 for<br />
insert types and colors.<br />
GB-200 CARPET<br />
1-1/2"<br />
1-1/2"<br />
1/8"<br />
1/8"<br />
3/8"<br />
7/16"<br />
3/8"<br />
7/16"<br />
GB-201 VINYL<br />
1-1/2"<br />
1/8"<br />
3/8"<br />
7/16"<br />
GB-202 POLY-BRUSH<br />
SPECIFICATIONS<br />
Subject to change without notice<br />
1-1/2"<br />
1/8"<br />
Material: Corrosion-resistant 6063-T52 aluminum with various<br />
inserts fusion bonded to backing for durability<br />
Thickness, overall: 1/2”<br />
Additional specs: 6063-T52 aluminum spaced 1-1/2” on center<br />
and connected with rubber hinges with 1/8” slotted holes for<br />
maximum drainage<br />
Weather resistance: Hinges and footpads remain flexible<br />
Rolling load: Up to 1,000 lbs./wheel<br />
LEED: Possible LEED-NC credits; MR credit 4 (1-2 points);<br />
MR credit 5 (1-2 points); IEQ credit 5 (1 point)<br />
Recycle content: 38.3% pre-consumer<br />
GB-204 VINYL ABRASIVE<br />
1-1/2"<br />
1/8"<br />
3/8"<br />
7/16"<br />
3/8"<br />
7/16"<br />
1-1/2"<br />
1/8"<br />
GB-205 SERRATED ALUMINUM<br />
1/2"<br />
FLOOR<br />
7/16"<br />
1/16"<br />
L-4 RECESSED FRAME<br />
1-1/2"<br />
CONCRETE<br />
Recessed application requires use of aluminum frame illustrated at left. The<br />
frame helps create a clean installation with well defined edges and corners.
6<br />
866-391-6216<br />
www.base-spec.com<br />
info@base-spec.com<br />
P: 651-463-2273<br />
F: 651-463-2320<br />
BASE MAT SERIES<br />
MB-300 FOR LIGHT TO<br />
MEDIUM TRAFFIC AREAS<br />
l Dimensionally stable, popular<br />
aluminum hinge for roll up ease during<br />
maintenance<br />
l Surface and recessed applications<br />
l Ideal for exterior and interior entryways,<br />
foyers, vestibules, etc.<br />
Base Series 300 Mats are an economical barrier<br />
for mud, dirt and soilage deposited by foot traffic.<br />
The mats feature aluminum hinged framework with<br />
cushioned supports at the bottom of each segment.<br />
All Base Mats facilitate cleanup — roll up and clean<br />
beneath. See page 11 for insert types and colors.<br />
3/8" Low-Profile<br />
Base Mat<br />
Weather<br />
resistant<br />
roll-up mat<br />
Aluminum<br />
hinge<br />
MB-300 CARPET<br />
SPECIFICATIONS<br />
Subject to change without notice<br />
Material: Corrosion-resistant 6063-T52 aluminum with various<br />
insert options<br />
Thickness: Mat only; 3/8”<br />
Depth: Mat and frame (level base); 7/16”<br />
Frame options: Surface mount ramp or recessed frame<br />
Additional specs: Aluminum hinges<br />
LEED: Possible LEED-NC credits; MR credit 4 (1-2 points);<br />
MR credit 5 (1-2 points); IEQ credit 5 (1 point)<br />
Recycle content: 49% pre-consumer<br />
CUSHION<br />
MB-301 VINYL<br />
CUSHION<br />
MB-302 POLY-BRUSH<br />
CUSHION<br />
CUSHION<br />
Base Mat system shows (1) tapered 2” x 3/8” vinyl ramp-spacer<br />
for surface applications, (2) aluminum hinge mat 2” on centers,<br />
(3) 2” x 3/8” spacer for recess applications and (4) 1” x 7/16”<br />
aluminum frame for recess applications. Both vinyl spacers are<br />
available with and without under-mat tongues (illustrated on<br />
tapered ramp-spacer 1). A 1-3/8” x 3/8” aluminum ramp is<br />
available in place of vinyl ramp-spacer (see below).<br />
CUSHION<br />
MB-304 VINYL ABRASIVE<br />
CUSHION<br />
1-3/8"<br />
3/8"<br />
B-2 ALUMINUM RAMP<br />
MB-305 SERRATED CUSHION ALUMINUM<br />
CUSHION<br />
(1) B-1 VINYL RAMP FRAME<br />
1<br />
(2) ALUMINUM HINGE MAT (3) VINYL SPACER (4) L-1 RECESSED FRAME<br />
3<br />
4<br />
2 2<br />
CUSHION<br />
CUSHION
7<br />
866-391-6216<br />
www.base-spec.com<br />
info@base-spec.com<br />
P: 651-463-2273<br />
F: 651-463-2320<br />
BASE MAT SERIES<br />
MB-400 FOR LIGHT TO<br />
MEDIUM TRAFFIC AREAS<br />
l Dimensionally stable, quiet<br />
vinyl hinge for roll up ease<br />
during maintenance<br />
l Surface and recessed applications<br />
l Ideal for exterior and interior entryways,<br />
foyers, vestibules, etc.<br />
Base Series 400 Mats are an economical barrier for<br />
mud, dirt and soilage deposited by foot traffic. The<br />
mats feature vinyl hinged framework with cushioned<br />
supports at the bottom of each segment. All Base<br />
Mats facilitate cleanup — roll up and clean<br />
beneath. See page 11 for insert types and colors.<br />
3/8" Low-Profile<br />
Base Mat<br />
Weather<br />
resistant<br />
roll-up mat<br />
Vinyl<br />
hinge<br />
MB-400 CARPET<br />
SPECIFICATIONS<br />
Subject to change without notice<br />
Material: Corrosion-resistant 6063-T52 aluminum with various<br />
insert options<br />
Thickness: Mat only; 3/8”<br />
Depth: Mat and frame (level base); 7/16”<br />
Frame options: Surface mount ramp or recessed frame<br />
Additional specs: Rubber hinges<br />
LEED: Possible LEED-NC credits; MR credit 4 (1-2 points);<br />
MR credit 5 (1-2 points); IEQ credit 5 (1 point)<br />
Recycle content: 49% pre-consumer<br />
Base Mat system shows (1) tapered 2” x 3/8” vinyl ramp-spacer<br />
for surface applications, (2) vinyl hinge mat 2” on centers, (3) 2” x<br />
3/8” spacer for recess applications and (4) 1” x 7/16” aluminum<br />
frame for recess applications. Both vinyl spacers are available<br />
with and without under-mat tongues (illustrated on tapered<br />
ramp-spacer 1). A 1-3/8” x 3/8” aluminum ramp is available in<br />
place of vinyl ramp-spacer (see below).<br />
MB-401 VINYL<br />
MB-402 POLY-BRUSH<br />
MB-404 VINYL ABRASIVE<br />
1-3/8"<br />
B-2 ALUMINUM RAMP<br />
3/8"<br />
MB-405 SERRATED ALUMINUM<br />
(2) RUBBER HINGE MAT (3) VINYL SPACER (4) L-1 RECESSED FRAME<br />
(1) B-1 VINYL RAMP FRAME<br />
1<br />
2 2<br />
3<br />
4
8<br />
BASE GRILLE SERIES<br />
800 STAINLESS STEEL<br />
866-391-6216<br />
www.base-spec.com<br />
info@base-spec.com<br />
P: 651-463-2273<br />
F: 651-463-2320<br />
l Look and feel of stainless steel<br />
l Long-lasting entrance system<br />
l 3 heights: 3/8 " , 5/8 " , 9/8 "<br />
l Durable welded construction<br />
l Supports foot and cart traffic<br />
Base 800 Series Stainless Steel Grille systems make<br />
a stunning first impression in building entryways.<br />
Built to last, Base Grilles maintain a “like new”<br />
look through the four seasons and throughout years<br />
of service. Surface beams and cross struts are robot<br />
welded at each intersection to assure longevity and a<br />
positive appearance in your application.<br />
Base Stainless Steel Grilles<br />
enhance building appearance<br />
Base Grilles help keep buildings clean, cut floor maintenance<br />
costs and provide an aesthetic touch to any building. Dirt and<br />
soilage drop through the voids and concentrate in the grille recess.<br />
Custodians simply lift a grille section and vacuum up dirt<br />
and debris. Grilles have lockdowns — removal and replacement<br />
are easy. Available in three heights (3/8", 5/8" and 9/8").<br />
SPECIFICATIONS<br />
Subject to change without notice<br />
Material: Stainless steel with support bars spaced 1” apart for<br />
maximum load capacity<br />
Construction: Surface wires .093” (2.4 mm) by 0.156” (4 mm)<br />
with 0.70” (1.8 mm) support bars spaced 1” (24mm) o.c. Spacing<br />
between rails shall be 0.140” (3.6 mm)<br />
Tread finish: Satin, stainless steel<br />
LEED: MR credits 4.1, 4.2 – recycled content; EQ credit 5<br />
3/8" Grille (SS- 838) 5/8" Grille (SS-858) 9/8" Grille (SS-898)<br />
1/8"<br />
A<br />
“L” series frame available for<br />
recess applications – for use<br />
on all four sides of grille<br />
B<br />
Frame: A=1/2" / B=3/4" Frame: A=3/4" / B=3/4" Frame: A=1-1/4" / B=1-1/4"
BASE REVERS-A-GRID<br />
SERIES 900 FOR HEAVY<br />
TRAFFIC AREAS<br />
l Reversible – flips top to bottom<br />
l Long lasting – doubles grid life<br />
l Buffed rubber wiper bars with raised<br />
aluminum scraper strips<br />
l Supports foot and cart traffic<br />
866-391-6216<br />
www.base-spec.com<br />
info@base-spec.com<br />
P: 651-463-2273<br />
F: 651-463-2320<br />
Base Revers-A-Grid scrapes<br />
debris and absorbs moisture<br />
REVERSIBLE<br />
for long life<br />
9<br />
Base 900 Series Revers-A-Grid combines<br />
absorbent buffed rubber wiper bars with raised<br />
aluminum scraper strips – top and bottom. Grid can<br />
be reversed – doubles mat life. Functions in surface<br />
and recessed applications – indoors and out.<br />
Insert colors: gray or black. See L-4 frame option<br />
(right) for recess applications. B-2 ramp option<br />
(right) for surface applications. Connector strip<br />
joins sections.<br />
SPECIFICATIONS<br />
Subject to change without notice<br />
Dimensions<br />
Surface application<br />
1-3/8"<br />
1-1/8"<br />
1-1/8"<br />
7/16"<br />
7/16"<br />
Material: Alternating strips of scraper bars (aluminum) and wiper<br />
bars (buffed or unbuffed rubber)<br />
Design: Gray or black rubber wiper bars<br />
Depth: 15/32”<br />
LEED: Possible LEED-NC credits; MR credit 4 (1-2 points);<br />
IEQ credit 5 (1 point)<br />
Recycle content: 25% pre-consumer, 75% post-consumer<br />
Sizes: Custom made to your specifications<br />
Shallow recess application<br />
FINISHED<br />
FLOOR<br />
CONCRETE<br />
1-1/8"<br />
7/16"<br />
L4 FRAME<br />
CONCRETE<br />
1-3/8"<br />
B-2 aluminum<br />
ramp for surface applications<br />
3/8"<br />
1/2"<br />
L-4 frame available for recess<br />
applications – for use on all<br />
four sides of Revers-A-Grid<br />
1-1/2"<br />
1/2"<br />
Connector strip (inverted<br />
“T”) joins sections – for<br />
use on traffic direction<br />
abutments<br />
1"<br />
Colors<br />
Gray<br />
Black
10<br />
866-391-6216<br />
www.base-spec.com<br />
info@base-spec.com<br />
P: 651-463-2273<br />
F: 651-463-2320<br />
Base Mat-Tray helps keep sand,<br />
mud and dirt out of commercial<br />
buildings and fine homes<br />
Attractive appearance compliments any entrance. Standard sizes: 2' x 3'; 3' x 4'; 4'x 6'. Custom sizes available – contact factory.<br />
BASE MAT-TRAY<br />
SERIES 1000<br />
l Concentrates sand, mud and dirt in tray<br />
l Helps prevent inside dirt tracking<br />
l Makes clean-up simple<br />
l Easy surface application<br />
l Residential and commercial<br />
Base Mat-Tray collects tracked-in sand, dirt, etc.<br />
Base 1000 Series Mat-Tray concentrates dirt and<br />
other foot traffic debris in the tray where clean-up<br />
is quick and easy. Keeps soilage out of homes and<br />
buildings. Tray perimeter is a 2" ramp – helps<br />
maintain sure footing (no vertical edge). Tray has<br />
flexible vinyl edging with 100% recycled rubber<br />
bottom. Interior tray rectangle recess is 3/8".<br />
Accepts Base Series 300 aluminum hinge inset mat<br />
(see opposite page for insert types and colors).<br />
SPECIFICATIONS<br />
Subject to change without notice<br />
Mat rolls up, leaves debris in tray.<br />
Material: Up to 60% recycled vinyl beveled edge plane;<br />
100% recycled rubber tray<br />
Dimensions: Tray; 1/8” thick bottom; 3/8” high<br />
Base Mat-Tray is attractive – built to last.<br />
Rubber tray concentrates debris for easy disposal.
11<br />
866-391-6216<br />
www.base-spec.com<br />
info@base-spec.com<br />
P: 651-463-2273<br />
F: 651-463-2320<br />
BASE METAL AND INSERT TREAD COLORS<br />
Colors shown are printed approximations. For exact color match, request a sample.<br />
Metal<br />
Colors<br />
Mill finish is standard. Optional colors are anodized for durability.<br />
Carpet<br />
Insert<br />
Colors<br />
Carpet<br />
Insert<br />
Colors<br />
Heavy duty nylon carpet insert stands up to normal foot traffic – absorbs moisture and helps keep buildings clean.<br />
Vinyl<br />
Insert<br />
Colors<br />
Durable insert with scraping ribs<br />
Poly-<br />
Brush<br />
Colors<br />
Deep pile polypropylene with cleaning bristles<br />
Vinyl<br />
Abrasive<br />
Colors<br />
Slip-resistant insert surface provides traction and sound footing.
ENVIRONMENTALLY FRIENDLY<br />
ENTRANCE PROTECTION <strong>SYSTEMS</strong><br />
525 First St., Farmington, MN 55024<br />
Toll-free: 866.391.6216<br />
Phone: 651.463.2273<br />
Fax: 651.463.2320<br />
E-mail: info@base-spec.com<br />
Web: www.base-spec.com<br />
Represented by: