Reference Manual - Segway
Reference Manual - Segway
Reference Manual - Segway
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
LeanSteer Frame/Handlebar Assembly<br />
Ensure the following:<br />
• The Handlebar is attached to the LeanSteer Frame.<br />
• The LeanSteer Frame is attached to the Powerbase.<br />
• The Handlebar is adjusted to the appropriate height.<br />
See “Setting Up Your <strong>Segway</strong> PT” in the Getting Started<br />
<strong>Manual</strong>.<br />
The LeanSteer Frame pivots at the base to control left/right direction<br />
of the <strong>Segway</strong> PT.<br />
If you lean to the left while holding the Handlebar, the LeanSteer<br />
Frame pivots and the <strong>Segway</strong> PT turns left. If you lean to the right<br />
while holding the handlebar, the LeanSteer Frame pivots and the<br />
<strong>Segway</strong> PT turns right. Always lean left or right in coordination with<br />
the LeanSteer Frame.<br />
Tire/Wheel Assembly and Fenders<br />
Ensure that Tires are inflated to the proper tire inflation pressure as<br />
specified in “<strong>Segway</strong> PT Specifications” on page 5.<br />
Tires and Wheels are shipped as an assembly. Do not remove the<br />
Tire from the Wheel.<br />
The Fenders on the <strong>Segway</strong> PT are designed to protect the rider from<br />
debris and to safeguard the rider while leaning into turns.<br />
34