Chevrolet Equinox - Scosche

2012
Chevrolet Equinox
ABOUT THE VEHICLE
Make: Chevrolet
Model: Equinox
Year: 2012
Scosche Pro App
STANDARD/ OPTIONAL
- AM/FM/CD/MP3/SAT Radio
- 3.5mm Aux/USB ipod input
- Steering Wheel Controls
- Bluetooth
- OnStar
SPEAKER NOTES
Front Speakers
A-Pillar Speaker: 1”
Upper Door: N/A
Lower Door: 6 1/2 ”
Speaker Adapter: TBA
Speaker Harness: N/A
Speaker Assembly: (3) 7mm Screw Securing
Speaker
Dimensions:
A-Pillar Speaker
L: 1.56” L: 6.50”
W: 1.56” W: 6.50”
D: 0.56” D: 2.75”
Rear Speakers
Lower Door: 6 1/2”
Subwoofer: TBA
Speaker Adapter: TBA
Speaker Harness: N/A
Speaker Assembly: (1) 7mm Screw Securing
Speaker
Dimensions:
Speaker Subwoofer:
L: 6.50” L: TBA
W: 6.50” W: TBA
D: 2.75” D: TBA
APPLICATIONS
Dash Type: New Custom Dash
Aftermarket Type: Double Din
Aftermarket Kit: TBA
Harness:
TBA
Antenna Adapter: TBA
TBA
Auxiliary Input: Center Console
USB Input: Center Console
FACTORY COLOR CODES
(+)12v Battery:
TBA
(+)12v Accessory:
TBA
(-) 12v Ground: TBA
(+)12v Amp Turn On: TBA
Left Front Speaker (+): TBA
Left Front Speaker (-): TBA
Right Front Speaker (+): TBA
Right Front Speaker (-): TBA
Left Rear Speaker (+): TBA
Left Rear Speaker (-): TBA
Right Rear Speaker (+): TBA
Right Rear Speaker (-): TBA

2012
Chevrolet Equinox
PRELIMINARY:
Disconnect the negative battery cable.
RADIO REMOVAL
VEHICLE DISASSEMBLY
Make:
Model:
Year:
Chevrolet
Equinox
2012 Scosche Pro App
A-PILLAR TWEETER
TBA
FRONT DOOR SPEAKERS
1. Use PRT to unclip the a-pillar, unplug and remove.
2. Use PRT to remove the tweeter from the a-pillar.
REAR DOOR SPEAKERS
1. Use PRT to unclip plastic cover behind door handle.
2. Extract (1) 7mm. screw behind panel just removed.
3. Use PRT to unclip panel under arm rest.
4. Extract (2) 7mm. screws behind panel just removed.
5. Use PRT to unplug window switch and remove.
6. Use PRT to unclip the door panel, unplug and remove.
7. Unscrew (3) 7mm. bolt securing the speaker, unplug and
remove.
1. Use PRT to remove plastic cover behind door handle.
2. Extract (1) 7mm. screw behind the panel just removed.
3. Use PRT to unplug and remove window switch.
4. Extract (2) 10mm. behind the panel just removed.
5. Use PRT to unclip the door panel, unplug and remove.
6. Extract (3) 7mm. screw securing the speaker, unplug and
remove.