Nanosurf easyScan 2 AFM Operating Instructions

CHAPTER 1: THE EASYSCAN 2 AFM
8. AFM Sample stage (option).
9. AFM Tool set (option). The items contained in the AFM Tool set are described in the
next section.
10. The easyScan 2 Installation CD (not shown): Contains software, calibration files, and
PDF files of all manuals.
11. A calibration certificate for each easyScan 2 AFM Scan Head (not shown).
12. This easyScan 2 AFM Operating Instructions manual (not shown).
13. AFM Extended Sample Kit (option; not shown), which comes with a set of 10 samples
and description of experiments.
14. Micrometer Translation Stage (option; not shown).
15. User's Guide; Translation Stage, Model 9064 (not shown; comes with Micrometer
Translation Stage).
16. Positioning Tool Set (not shown; comes with the Micrometer Translation Stage).
17. Break-out cable (comes with Signal Module S).
18. Connector box (comes with Signal Module A).
19. Two Signal Module cables (come with Signal Module A).
20. Scripting Interface certificate of purchase with Activation key printed on it (not shown;
comes with Scripting Interface).
21. Lithography Option certificate of purchase with Activation key printed on it (not
shown; comes with the Lithography Option).
22. Instrument Case (not shown).
The package may also contain easyScan 2 STM head(s) and modules for the STM, which are
described in the easyScan 2 STM Operating Instructions.
Please keep the original packaging material (at least until the end of the warranty period),
so that it may be used for transport at a later date, if necessary. For information on how to
store, transport, or send in the instrument for repairs, see Section 7.3: Storing the instrument
(page 83).
1.2.1: Contents of the Tool Set
The content of the Tool set depends on the modules and options included in your order. It
may contain any of the following items:
1. Ground cable.
2. Protection feet.
3. Cantilever tweezers: (103A CA).
4. Screwdriver, 2.3 mm.
14