Fiber Laser Application Selection Guide - IPG Photonics
Fiber Laser Application Selection Guide - IPG Photonics
Fiber Laser Application Selection Guide - IPG Photonics
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The Power to Transform ® with <strong>IPG</strong>’s Low & Mid Power Infrared <strong>Laser</strong>s<br />
Pulsed Nanosecond Infrared <strong>Fiber</strong> <strong>Laser</strong>s<br />
Pulsed Nanosecond Infrared<br />
<strong>Fiber</strong> <strong>Laser</strong>s (continued from reverse)<br />
YLP-C<br />
<strong>IPG</strong>’s YLP-C is designed specifically for gray<br />
scale, bit stream marking and applications<br />
that demand a more compact unit. These<br />
lasers have a fast turn-on, turn-off time with<br />
asynchronous triggering and are available in<br />
1 mJ and 0.5 mJ versions with 100 nsec and<br />
30 W.<br />
YLP-R<br />
<strong>IPG</strong>’s YLP-R, a short pulse, high frequency<br />
laser (1-10 ns, >500 kHz) has a peak power<br />
of up to 40 kW and is well suited to very fine<br />
micro-machining applications.<br />
YLP-HP Series<br />
<strong>IPG</strong>’s high power end of the YLP range with<br />
average power up to 500 W and pulse energy<br />
up to 50 mJ available at lower beam quality<br />
and longer pulse lengths. These<br />
rack-mounted lasers may be recommended<br />
for specific ablation processes; please<br />
contact <strong>IPG</strong> with your requirements.<br />
Pulsed Nanosecond 532 nm<br />
Green <strong>Fiber</strong> <strong>Laser</strong>s<br />
YLP-G<br />
A 532 nm, green wavelength version of the<br />
YLP laser available in 5 and 10 W with each<br />
producing M 2 =1.2. The 5 W version operates<br />
at a maximum of 300 kHz with 1.3 nsec pulse<br />
width and 0.014 mJ per pulse. The 10 W<br />
version operates at up to 600 kHz with the<br />
same fixed pulse width and pulse energy with<br />
no change in beam quality. This laser is best<br />
used for thin film removal.<br />
DLR Series<br />
Direct Diode <strong>Fiber</strong> <strong>Laser</strong>s<br />
A full line of rack-mounted, direct diode,<br />
industrial grade CW lasers from 20 W to<br />
1 kW at 970 nm typ. with other wavelengths<br />
available. These lasers can be modulated to<br />
50 kHz with pulse width down to 10 μsec.<br />
Units are air-cooled to 500 W; other<br />
modulation and collimator options are also<br />
available.<br />
Legal notices: All product information is believed to be accurate and is subject to change without notice. Information contained herein shall legally bind<br />
<strong>IPG</strong> only if it is specifically incorporated into the terms and conditions of a sales agreement. Some specific combinations of options may not be<br />
available. The user assumes all risks and liability whatsoever in connection with use of a product or its application. <strong>IPG</strong>, <strong>IPG</strong> <strong>Photonics</strong>, <strong>IPG</strong> <strong>Photonics</strong>’<br />
logo and The Power to Transform are trademarks of <strong>IPG</strong> <strong>Photonics</strong> Corporation. © 2010 <strong>IPG</strong> <strong>Photonics</strong> Corporation. All rights reserved.<br />
Contact <strong>IPG</strong>’s <strong>Application</strong>s Facilities to discuss complimentary sample processing.<br />
Oxford, MA Novi, MI Santa Clara, CA<br />
+1 508.373.1100 +1 248.863.5001 +1 408.748.1361<br />
50 Old Webster Road 46695 Magellan Drive 3930 Freedom Circle, Ste. 103<br />
Oxford, MA 01540 Novi, MI 48377 Santa Clara, CA 95054<br />
www.ipgphotonics.com * sales.us@ipgphotonics.com<br />
rev. 07/12