IP67 Digital Electronic Calipers - Swiss Instruments Ltd

TESA-HITE MAGNA 400 and 700
Made to withstand severe workshop conditions.
• Shop proof technology
• Long measuring span and rugged design
• Fully protected against:
- Water
- Oils
- Dust
Shop-proof
Technology
TESA-HITE 400
and 700
Precision in motion.
• Completely new design
featuring a built-in air
cushion and fixed panel
• Parallelism and
perpendicularity
measurements
IP67 Digital Electronic Calipers
IP67 Compliant -
Unrivaled protection against the penetration
of liquid or solid contaminants.
• Full protection from oil and coolant
splashes, as well as solid particles
• Encapsulation of the main
components prevents dust,
particles of metal,
spraying liquids
from entering
the caliper
• New electronic
measuring system
protected from liquids
and immune to
magnetic fields
• Specifications consistent
with DIN 862
• Large, 1/4” LC display for easy reading
• Auto shut-off after two hours
• Instant inch/metric conversion
• Power supply: one 3V lithium battery, type CR 2032
• Battery life: approx. 1.5 years
Catalog No. EDP No. Description List Price Sale Price
00730047 28260 Tesa Hite Magna 400 $3,305.00 $2,975.00
00730059 28261 Tesa Hite Magna 700 $4,217.00 $3,795.00
00730043 24675 Tesa Hite 400 $4,078.00 $3,670.00
00730044 24676 Tesa Hite 700 $5,211.00 $4,690.00
FREE With
Proof of
Purchase
599-9004-200
Limit one per proof-of-purchase.
FREE TESA-HITE Accessory Set
A $741.00 Value
Send proof-of-purchase and
contact information to:
Brown & Sharpe, Inc.
TESA Division
“Free Accessory Set Program”
250 Circuit Dr.
N. Kingstown, RI 02852-1700
RS-232
Models
Catalog EDP Thumb-
N0. No. Description wheel Range List Price Sale Price
00590301 27679 Dura-Cal IP67 Y 6”/150 mm $178.00 $142.00
00530300 29726 TESA-Cal IP67 N 6”/150 mm $187.00 $168.00
00530302 20117 TESA-Cal IP67 Y 8”/200 mm $288.00 $259.00
00530303 20118 TESA-Cal IP67 Y 12”/300 mm $426.00 $383.00
00530311 28466 DURA-CAL IP67 W/RS-232 Y 6”/150mm $239.00 $215.00
00530312 28467 IP67 Digital Caliper W/RS-232 Y 8”/200mm $312.00 $281.00
00530313 28468 IP67 Digital Caliper W/RS-232 Y 12”/300mm $511.00 $460.00
00530251 24749 Small-sized Caliper 0-1”/2-25mm $401.00 $361.00
with measuring tip

Brown & Sharpe Shop-Cal ® Digital Calipers
Economical Swiss-made quality and design
The Brown & Sharpe Shop-Cal provides easy-to-read, accurate
measurements of day-to-day operations. Stainless steel
for durable, reliable and accurate measurements.
•
•
•
•
•
•
Absolute and differential measuring system
A large, 1/4” LC display for easy readings
Auto shut-off
Instant inch/metric conversion
Battery life: approx. 1.5 years
Power supply: 3V lithium-battery, type CR 2032
Brown & Sharpe Dial-Cal ®
Dial Calipers
World’s First & Finest!
• Tough - Anti-backlash,
shock-proof design
• Durable - Covered stainless
steel rack
• Versatile - Measures inside,
outside, depth & step
• Precise - .100”/2mm per revolution
• Reliable - Adjustable zero set
and slide lock
• Easy-To-Read - 1.25” diameter
rotating dial w/lock
Catalog No. EDP No. Range Resolution List Price Sale Price
00590090 20971 0 - 6” / .0005” / 0.01 mm $123.00 $98.00
0 - 150 mm
INTERAPID ® LIGHT Digital Caliper
Lightweight Aluminum Alloy Frame
•
•
•
•
•
•
Titanium Jaws (O.D.)
12” to 120” Sizes
Patented Inductive Measuring System
Resolution: .0005”
INCH/METRIC Conversion
MIN/MAX and PRESET Functions
Measure
up to
10 feet!
Max.
Catalog EDP Perm. Repeat-
No. No. Range Error ability Description List Price Sale Price
00590061 23160 12”/330mm 30µm 20µm Interapid light 300 $1,177.00 $1,059.00
00590062 23161 24”/630mm 40µm 20µm Interapid light 600 $1,492.00 $1,343.00
00590063 23162 40”/1025mm 60µm 20µm Interapid light 1000 $1,702.00 $1,532.00
00590064 23163 60”/1525mm 150µm 20µm Interapid light 1500 $2,843.00 $2,559.00
00590065 23164 80”/2040mm 250µm 30µm Interapid light 2000 $3,551.00 $3,196.00
00590066 23165 100”/2545mm 350µm 30µm Interapid light 2500 $4,769.00 $4,292.00
00590067 23166 120”/3050mm 450µm 40µm Interapid light 3000 $5,326.00 $4,793.00
599-579-200
Catalog EDP Smallest Jaw List Sale
No. No. Description Division Length Price Price
599-579-4 51774 6” Dial-Cal with Silver Face .001 1.5” $143.00 $100.00
599-579-5 51879 6” Dial-Cal with Jet Console, .001 1.5” $143.00 $100.00
Black Face & Orange Hand
599-579-8-1 27594 8” Dial-Cal with Silver Face .001 1.9” $250.00 $175.00
599-579-8-5-1 27593 8” Dial-Cal with Jet Console, .001 1.9” $250.00 $175.00
Black Face & Orange Hand
599-579-12-1 27592 12” Dial-Cal with Silver Face .001 2.5” $298.00 $238.00
599-579-12-5-1 27591 12” Dial-Cal with Jet Console, .001 2.5” $298.00 $238.00
Black Face & Orange Hand
05.60013 42534 Depth Measuring Foot (6” Only) $51.00 $46.00
05.60086 27000 Depth Measuring Foot (8” & 12”) $51.00 $46.00
599-579-200 26908 Centerline Plus Accessory Kit $124.00 $112.00

TESA IP67
Models with short cut measuring faces or one or two fixed jaws
Micromaster Digital Micrometers
Catalog No. EDP No. Description
Bridge
Length List Price Sale Price
00530241 24739 IP67 Depth Caliper Elec Std 8in/200mm 3.93” $437.00 $393.00
00530242 24740 IP67 Depth Caliper Elec Std 10in/250mm 3.93 $462.00 $416.00
00530243 24741 IP67 Depth Caliper Elec Std 12in/300mm 3.93 $486.00 $437.00
00530244 24742 IP67 Depth Cal Elec Std 20in/500mm 3.93 $577.00 $519.00
00530245 24743 IP67 Depth Caliper Fixed Jaw 12in/300mm 5.90 $543.00 $489.00
00530246 24744 IP67 Depth Cal Fixed Jaw 20in/500mm 5.90 $653.00 $588.00
00530247 24745 IP67 Depth Caliper 2 Fixed Jaws 12in/300mm 5.90 $673.00 $606.00
01961000 29552 3V Lithium Battery - CR2032 5.90 $10.60 $10.00
INTERAPID ® Electronic Depth Calipers
3.937”
2.559”
.236”
.629”
3.503”
Catalog No. EDP No. Range Measuring Foot List Price Sale Price
05.90055 27575 0 - 8 A $512.00 $461.00
05.90058 27576 0 - 12 A $582.00 $524.00
05.90056 27577 0 - 8 B $620.00 $558.00
05.90059 27578 0 - 12 B $720.00 $648.00
05.90057 27579 0 - 8 C $772.00 $695.00
05.90060 27583 0 - 12 C $896.00 $806.00
Optional Accessories
05.60087 27580 Removable bridge 7 in / 180 mm $73.00 $66.00
05.60088 27581 Removable bridge 10 in / 260 mm $102.00 $92.00
05.60089 27582 Removable bridge 12.5 in / 320 mm $114.00 $103.00
Bridge Length 3.93
.709”
.709”
.299”
.079”
.137”
.944”
.488”
.236”
.059”
.196”
.551”
A
.709”
.709”
B
C
.709”
A sleek, ergonomic design and plenty of impressive features, including the new
“capa µ system ® ”, give the Micromaster Digital Micrometer a comfortable
advantage in both form and function.
• Large, easy-to-read 1/4” digital display
• Preset absolute and differential modes
• Battery life: 1 to 2 years normal usage
• Automatic shut-off after 10 minutes
• Meets or exceeds applicable Federal
and DIN standards
• Shop-hardened, fitted case
EDP Water RS-232
Catalog No. No. Range Resistant Output List Price Sale Price
Digital Electronic Micrometers
599-100 27266 0-1.2”/0-30mm N N $258.00 $219.00
599-125 27271 0-1.2”/0-30mm Y N $275.00 $234.00
599-125RS 27267 0-1.2”/0-30mm Y Y $281.00 $239.00
599-126 27272 1-2”/25-50mm Y N $332.00 $282.00
599-126RS 27268 1-2”/25-50mm Y Y $336.00 $286.00
599-127 27273 2-3”/50-75mm Y N $345.00 $293.00
599-127RS 27269 2-3”/50-75mm Y Y $349.00 $297.00
599-128 27274 3-4”/75-100mm Y N $362.00 $308.00
599-128RS 27270 3-4”/75-100mm Y Y $385.00 $327.00
0-3 Inch Set
06030029 21235 consisting of Y N $1,160.00 $986.00
599-125, 599-126, 599-127
Note: 4” through 12” ranges are also available

Brown & Sharpe
Chrome Frame Micrometers
Top-of-the-Line:
Satin-Chrome Micrometers
The original - and still the best! Silky-smooth,
precise operation and functional design
combine to continue the tradition of the
Brown & Sharpe micrometer as the basic tool
of choice for quality-minded individuals. Carbide measuring
faces, convertible friction to feel thimble sleeves, easy-reading
satin-chrome finish and spindle locks are standard on all
the micrometers listed.
1”- 2” and 2”- 3” micrometers have insulated frames.
Catalog No. EDP No. Description List Price Sale Price
599-1-31 51089 Chrome Frame Mic
with Slant-Line Grad $149.00 $127.00
599-1-32 51090 Chrome Frame Mic
with Straight-Line Grad $149.00 $127.00
Value-Line Micrometers
Brown & Sharpe micrometers continue as the standard wherever
measuring consistency is vital
Features:
• Satin-chrome thimble
• Spindle lock
• .0001” reading
• Tungsten carbide tipped faces
• Straight-line graduations.
• Fixed/friction thimble
• Black enamel frame
• Meets Federal specifications
Catalog No. EDP No. Range Graduations List Price Sale Price
599-1-44 25943 0 - 1” .0001” $102.00 $87.00
599-2-44 25944 1 - 2” .0001” $113.00 $96.00
599-3-44 25945 2 - 3” .0001” $114.00 $97.00
Metric models also available.Standards are available separately.
Individual wood cases are available for 1 to 4” Value-Line micrometers.
Micrometer Sets
599-181-923 25983 0 - 3” Without Standards $410.00 $349.00
599-181-923-1 25984 0 - 3” With Standards $446.00 $379.00
Metric sets also available.
0-6”, 0-12”, and 6”-12” Micrometer Sets also available.
ETALON ® 260 Micrometers
• High precision micrometer designed for fast,
easy reading
• Reversible fixed/friction thimble
Catalog No. EDP No. Range Graduations Accuracy Parallelism List Price Sale Price
71.115899 41565 0 - 1” 0.0001” 2 µm 1 µm $190.00 $171.00
71.115900 41566 1 - 2” 0.0001” 2 µm 1.5 µm $300.00 $270.00
71.115901 41567 2 - 3” 0.0001” 3 µm 1.5 µm $329.00 $296.00
71.115902 41568 3 - 4” 0.0001” 3 µm 1.5 µm $358.00 $322.00
ETALON ® Micrometer Stand
For micrometers up to 12 in / 300 mm and other measuring
instruments.
Catalog No. EDP Number List Price Sale Price
01.60201 39547 $116.00 $104.00
Micrometer Checking Set
The First Complete Set!
The Brown & Sharpe Micrometer Checking Set
has all the necessary components to check
the accuracy of your micrometers, ensuring
you that they are performing to their
optimum specifications
• Set assists you in meeting Federal Specification GGG-C-15c for flatness and parallelism
and conforms to MIL-STD-45662A
• Ten-piece selection of gage blocks allows checking of various spindle positions over the
complete micrometer range
• Two optical flats: .500” diameter and .5125”diameter which allows checking anvil
faces at half revolutions of the spindle for measuring flatness
• Each set and each block is individually serialized
• Gage blocks include certificate of calibration
• Includes fitted wooden case
Catalog No. EDP Number List Price Sale Price
598-10-18 27076 $292.00 $263.00

Micromaster Depth Micrometer
Micromaster Intrimik
Easy-to-Read,
Accurate Measurement
of Bore Diameters
• 3-key functions w/RS-232 data output
• Non-rotating spindle
• Hardened steel measuring foot faces: 100 x 15mm
• Hardened steel measuring rods 3mm dia.
• Measuring span 0-90 w/3 rods, 0-180mm w/6 rods
Catalog EDP Water RS-232 List Sale
No. No. Range Accuracy Resistant Output Price Price
60.30069 27460 0-3.5”/0-90mm .00016” Y Y $1,014.00 $913.00
60.30070 27461 0-7”/0-180mm .00016” Y Y $1,179.00 $1,061.00
IP54 compliant when RS-232 is not being used.
Internal Analog Depth Gage Micrometers
• 1/8 measuring rods
• Friction thimble
• Ring lock
• Hardened precision base
• Satin chrome finish
• Supplied in a fitted Mahogany case
EDP No. Base List Sale
Catalog No. No. Range Graduation Rods Length Price Price
599-603-123-3 25624 0-3” .001” 3 2.5” $188.00 $169.00
599-603-143-3 25627 0-3” .001” 3 4” $204.00 $184.00
599-603-126-3 25625 0-6” .001” 6 2.5” $219.00 $197.00
599-603-146-3 25628 0-6” .001” 6 4” $246.00 $221.00
Catalog No. EDP No. Range List Pric Sale Price
599-290-35-1 27503 0.240-0.320”/6-8 mm $806.00 $725.00
599-290-42-1 27504 0.320-0.400”/8-10 mm $806.00 $725.00
599-290-50-1 27505 0.400-0.480”/10-12 mm $806.00 $725.00
599-290-60-1 27506 0.430-0.550”/11-14 mm $827.00 $744.00
599-290-70-1 27507 0.550-0.670”/14-17 mm $827.00 $744.00
599-290-80-1 27508 0.670-0.790”/17-20 mm $827.00 $744.00
599-290-100-1 27509 0.790-0.990”/20-25 mm $857.00 $771.00
599-290-120-1 27510 0.990-1.18”/25-30 mm $857.00 $771.00
599-290-140-1 27511 1.18-1.38”/30-35 mm $921.00 $829.00
599-290-160-1 27512 1.38-1.58”/35-40 mm $931.00 $838.00
599-290-200-1 27513 1.58-1.98”/40-50 mm $942.00 $848.00
599-290-240-1 27514 1.98-2.36”/50-60 mm $972.00 $875.00
599-290-280-1 27515 2.36-2.76”/60-70 mm $1,001.00 $901.00
599-290-320-1 27516 2.76-3.16”/70-80 mm $1,017.00 $915.00
599-290-360-1 27517 3.16-3.55”/80-90 mm $1,034.00 $931.00
599-290-400-1 27518 3.55-3.95”/90-100 mm $1,061.00 $955.00
599-290-420-1 27519 3.95-4.94”/100-125 mm $1,576.00 $1,418.00
599-290-440-1 27520 4.94-5.90”/125-150 mm $1,594.00 $1,435.00
599-290-460-1 27521 5.90-6.90”/150-175 mm $1,611.00 $1,450.00
599-290-480-1 27522 6.90-7.88”/175-200 mm $1,655.00 $1,490.00
599-290-500-1 27523 7.88-8.86”/200-225 mm $1,936.00 $1,742.00
599-290-520-1 27524 8.86-9.85”/225-250 mm $2,052.00 $1,847.00
599-290-540-1 27525 9.85-10.84”/250-275 mm $2,112.00 $1,901.00
599-290-560-1 27526 10.84-11.80”/275-300 mm $2,170.00 $1,953.00
10 11

Micromaster Alesometer
• Internal measuring with 3-line contact
• Specially suited for through and blind bores
Catalog No. EDP No. Range
62.90051 28418 0.2362-0.3150”/6-8 mm
62.90052 28419 0.3150-0.3970”/8-10 mm
62.90023 28420 0.3970-0.4921”/10-12.5 mm
62.90024 28421 0.4921-0.5905”/12.5-15 mm
62.90025 28422 0.5905-0.6890”/15-17.5 mm
62.90026 28423 0.6890-0.7874”/17.5-20 mm
62.90027 28424 0.7874-0.9843”/20-25 mm
62.90028 28425 0.9843-1.1811”/25-30 mm
62.90029 28426 1.1811-1.3780”/30-35 mm
62.90030 28427 1.3780-1.5748”/35-40 mm
62.90031 28428 1.5748-1.9685”/40-50 mm
62.90032 28429 1.9685-2.3622”/50-60 mm
62.90033 28430 2.3622-2.7560”/60-70 mm
62.90034 28431 2.7560-3.3465”/70-85 mm
62.90035 28432 3.3465-3.9370”/85-100 mm
62.90036 28433 3.9370-4.9212”/100-125 mm
62.90037 28434 4.9212-5.9055”/125-150 mm
62.90038 28435 5.9055-6.8897”/150-175 mm
62.90039 28436 6.8897-7.8740”/175-200 mm
62.90040 28437 7.8740-8.8582”/200-225 mm
62.90041 28438 8.8582-9.8425”/225-250 mm
62.90042 28439 9.8425-10.8267”/250-275 mm
62.90043 28440 10.8267-11.8110”/275-300 mm
List Price Sale Price
$1,047.00 $942.00
$1,047.00 $942.00
$1,180.00 $1,062.00
$1,180.00 $1,062.00
$1,180.00 $1,062.00
$1,180.00 $1,062.00
$1,201.00 $1,081.00
$1,201.00 $1,081.00
$1,201.00 $1,081.00
$1,201.00 $1,081.00
$1,301.00 $1,171.00
$1,301.00 $1,171.00
$1,393.00 $1,254.00
$1,393.00 $1,254.00
$1,393.00 $1,254.00
$1,773.00 $1,596.00
$1,920.00 $1,728.00
$2,096.00 $1,887.00
$2,243.00 $2,019.00
$2,387.00 $2,149.00
$2,533.00 $2,280.00
$2,678.00 $2,411.00
$2,823.00 $2,541.00
INTRIMIK Internal Micrometers
with Analog Indication (Inch Models)
Features:
• Intrimik measuring arms move at right angles to the spindle
• Analog reading, with graduations as shown in the table
• Instruments in the range .275” to 4.00”
have hardened steel measuring points (770 HV)
• Instruments in the range 4.00” to 12.00” have
tungsten carbide inserts in the measuring points (1300 HV)
Measuring Depth (in.)
Smallest with Extensions
Catalog No. EDP No. Range Division None One Two List Price Sale Price
599-281-3 43972 .275 to .350 .0001 2 6 10 $502.00 $452.00
599-281-4 43974 .350 to .425 .0001 2 6 10 $504.00 $454.00
599-281-5 43976 .425 to .500 .0001 2 6 10 $507.00 $456.00
599-281-6 43978 .500 to .600 .0002 3 9 15 $534.00 $481.00
599-281-7 43980 .600 to .700 .0002 3 9 15 $519.00 $467.00
599-281-8 43982 .700 to .800 .0002 3 9 15 $532.00 $479.00
599-281-10 43984 .800 to 1.000 .0002 3 9 15 $567.00 $510.00
599-281-12 43986 1.000 to 1.200 .0002 3 9 15 $575.00 $518.00
599-281-14 43988 1.200 to 1.400 .0002 3 9 15 $584.00 $526.00
599-281-16 43990 1.400 to 1.600 .0002 3 9 15 $591.00 $532.00
599-281-20 43992 1.600 to 2.000 .0002 3 9 15 $673.00 $606.00
599-281-24 43994 2.000 to 2.400 .0002 3 9 15 $684.00 $616.00
599-281-28 43996 2.400 to 2.800 .0002 3 9 15 $725.00 $653.00
599-281-32 43998 2.800 to 3.200 .0002 3 9 15 $714.00 $643.00
599-281-36 44000 3.200 to 3.600 .0002 3 9 15 $754.00 $679.00
599-281-40 44002 3.600 to 4.000 .0002 3 9 15 $740.00 $666.00
00882701 27011 4.000 to 5.000 .0005 4 10 $1,160.00 $1,044.00
00882702 27012 5.000 to 6.000 .0005 4 10 $1,195.00 $1,076.00
00882703 20221 6.000 to 7.000 .0005 4 10 $1,227.00 $1,104.00
00882704 20222 7.000 to 8.000 .0005 4 10 $1,262.00 $1,136.00
00883201 * 20223 8.000 to 9.000 .0005 4 10 $1,646.00 $1,481.00
00883202 * 20224 9.000 to 10.00 .0005 4 10 $1,700.00 $1,530.00
00883203 * 20225 10.00 to 11.00 .0005 4 10 $1,755.00 $1,580.00
00883204 * 20226 11.00 to 12.00 .0005 4 10 $1,815.00 $1,634.00
* Comes with 6” extension in finished wooden case.
Full sets
Catalog No. EDP No. Range List Price Sale
00880100 20214 .275 - .500” $1,553.00 $1,398.00
00880400 20215 .500 - .800” $1,700.00 $1,530.00
00881200 20216 .800 - 1.600” $2,523.00 $2,271.00
00881900 20217 1.600 - 4.000” $4,643.00 $4,179.00
00882700 20218 4.000 - 8.000” $6,179.00 $5,561.00
Includes setting rings and one extension.
12 13

ETALON PISTOL GRIP
Bore Gages
Self-aligning and self-centering bore gages with 3-line
contact. All ROCH ALESOTEST are designed for
measuring not only blind bores, but also through bores,
as well as short centering shoulders, except
for the models covering the application ranges from
.236 in - 3.936 in / 6 to 10mm.
Includes
DIGICO II
Digital
Indicator
Catalog No. EDP No. Range List Price Sale Price
62.90080 28931 .236-.394 / 6-10 $1,740.00 $1,566.00
62.90081 28932 .394-.787 / 10-20 $2,602.00 $2,342.00
62.90082 28933 .787-1.575 / 20-40 $2,988.00 $2,689.00
62.90083 28934 1.575-2.756 / 40-70 $3,141.00 $2,827.00
62.90084 28935 2.756-3.936 / 70-100 $3,369.00 $3,032.00
Compaq Bore Gages
Bore Gages, type IA00 or IA0 –
complete with dial gag
•
•
•
•
•
Made to measure bore diameters,
ovality and concentricity by comparison.
Automatic 3-point centering
Also performs 2-point measuring
Contact point release button
Tungsten carbide probe sets and
dial gages are fully interchangeable.
TESA DIGICO 205
Digital Electronic
Indicator
The only electronic indicator
that fully conforms with
DIN requirements.
• Dimensions according to DIN 878
• ABSOLUTE measuring mode
• Combined analog/digital display
• Mechanical tolerance markers
• OPTO-RS data output
• Auto-reverse and lockable keypad
• Inspection report included
• Swiss made
Catalog EDP Measuring
No. No. Range Resolution Force (N) List Price Sale Price
01990230 39676 .5”/12.5mm .0005”/0.01mm < 2.0 $255.00 $204.00
TESA IP65 Electronic Dial Test Indicators
(Lever-Type)
All the mechanical advantages of a
dial test indicator, with a digital reading
and a durable IP65 compliant design
• Patented inductive measuring system
• Analog and numerical indication
• Numerical interval .0005/.00005 in / 0.01/0.001 mm
• Selectable scale division: 10, 20, 50 µm/1, 2, 5 µm
• IP65 compliant – Water and coolant resistant
• Inch/metric conversion
Catalog No. EDP No. Description Reading List Price Sale Price
• RS-232 data output combined with external power supply
S57200426 26075 Bore Gage Comp .270 - .485in .0001” $1,903.00 $1,713.00
• Displayed measuring modes (NOR/MIN/MAX/MAX-MIN)
S57200507 26076 Bore Gage Comp .270 - .485in .00005” $1,920.00 $1,728.00
• Automatic shut down
S57300427 26343 Bore Gage Comp .500 - 1in .0001” $2,153.00 $1,938.00
S57300771 26315 Bore Gage Comp .500 - 1in .0005” $2,110.00 $1,899.00
• Compatible with all TESATAST accessories
S57400428 26370 Bore Gage Comp .800 - 2in .0001” $1,933.00 $1,740.00
Catalog EDP Measuring Force
S57400772 26357 Bore Gage Comp .800 - 2in .0005” $1,894.00 $1,705.00
No. No. Range Dial Diam. N(±15%) List Price Sale Price
01830001 29015 .030” .0005”/.00005” 1” $407.00 $366.00
01830002 29016 .020” .0005”/.00005” 1.45” $491.00 $442.00
14 15

Brown & Sharpe AGD Indicators
The industry’s most popular
AGD indicator sizes
BESTEST ®
Dial Test Indicators
- Black Face Models
with Orange Hand
Easy-to-read, satin black,
“jet-console” face
BesTest ® Indicators with
high visibility orange
hand. Each BesTest ®
Indicator set comes
complete with one carbide
tip contact point, .080”
diameter; one 1/2” long x .250”
diameter extension with dovetail; one contact
point wrench; one durable molded case and certifcate
of accuracy and traceability.
D1-20261A
D5-21221F
D1-23226A
• Easy-to-read “jet-console” face w/high
visibility orange hand
• Constant clockwise rotation
• Automatic reversal
• Swivelling point
• Carbide tip point
• Universal mounting
• Monoblock (Precision Watch) body design
• Anti-magnetic and corrosion resistant
• Includes fitted case
D1-20241A
Catalog EDP AGD Dial Dial List Sale
No. No. Group Range Reading Diam Marking Price Price
D1-20141A 33638 1 .025” .0001” 1.75 0-5-0 $271.00 $217.00
D1-20241A 33836 2 .025” .0001” 2.25 0-5-0 $218.00 $174.00
D1-20126A 33611 1 .075” .0005” 1.75 0-15-0 $296.00 $237.00
D1-20226A 33786 2 .075” .0005” 2.25 0-15-0 $179.00 $143.00
D1-20111A 33557 1 .250” .001” 1.75 0-50-0 $259.00 $207.00
D1-20211A 33705 2 .250” .001” 2.25 0-50-0 $259.00 $207.00
Long-Range Indicators
D5-21221F 86002 2 1.00” .0005 2.25 0-50 $177.00 $142.00
1-Rev Indicators
D1-23226A 86006 2 .020” .0005” 2.25 0-10-0 $296.00 $237.00
D1-23241A 34018 2 .008” .0001” 2.25 0-4-0 $233.00 $186.00
Metric Indicators
D1-20261A 33857 2 2.5mm 0.01 mm 2.25 0-50-0 $257.00 $201.00
D1-20281A 33886 2 0.5mm 0.002 mm 2.25 0-10-0 $218.00 $174.00
Catalog EDP Smallest Dial Point Tip List Sale
No. No. Range Marking Division Dia. Length Dia. Price Price
599-7029-5 51732 .030” 0-15-0 .001” 1” 1/2” .080” $153.00 $138.00
599-7030-5 51733 .030” 0-15-0 .0005” 1” 1/2” .080” $155.00 $140.00
599-7031-5 51734 .030” 0-15-0 .0005” 1-1/2” 1/2” .080” $172.00 $155.00
599-7032-5 51737 .008” 0-4-0 .0001” 1” 1/2” .080” $208.00 $187.00
599-7033-5 51738 .008” 0-4-0 .00005” 1-1/2” 1/2” .080” $219.00 $197.00
599-7034-5 51735 .020” 0-10-0 .0005” 1” 1-7/16” .080” $192.00 $173.00
599-7035-5 51736 .020” 0-10-0 .0005” 1-1/2” 1-7/16” .080” $211.00 $190.00
FREE With
Proof of
Purchase
2 Brown & Sharpe Ball Contact Points
An $88.00 Value
Send proof-of-purchase and
contact information to:
Brown & Sharpe, Inc.
TESA Division
.040” and .120”
“Free Contact Points Program”
Contact Point Free
250 Circuit Dr.
16
with Proof of Purchase
N. Kingstown, RI 02852-1700
Limit one per proof-of-purchase.
17

INTERAPID ® Dial Test Indicators
• Magnetic resistant
• Two-way action – no reversing lever
• Dovetail and adjustable stem adaption
• Carbide contact point swivels 210°
• Extremely low measuring pressure
• Ball bearing and jewelled movement
• Precise repetitive readings
• Easy-to-read tilted dial
• With revolution counter
INTERAPID ® Magnetic Bases
Featuring articulating arm and dovetail clamp with fine adjustment, these bases
provide precise setting of gage. Widely used for high accuracy measuring
with high resolution indicators and electronic gages. Measuring force 400N,
V diameter 1.18”-5.9”.
016390030
01690031 016390032 016390033
EDP Dial Dial List Sale
Catalog No. No. Series Range Grad. Dia. Reading Price Price
Vertical Models
74.111377 41685 312b-1V .060” .0005” 1.5” 0-15-0
74.111378 41686 312b-2V .060” .0005” 1.0” 0-15-0
74.111379 41687 312b-20V .060” .001” 1.0” 0-15-0
74.111957 41714 312b-3V .016” .0001” 1.5” 0-4-0
74.111958 41715 312b-15V .060” .0005” 1.5” 0-15-0
Horizontal Models — for measurement at 12°
74.111370 42775 312b-1 .060” .0005” 1.5” 0-15-0
74.111371 86150 312b-2 .060” .0005” 1.0” 0-15-0
74.111372 41680 312b-3 .016” .0001” 1.5” 0-4-0
74.111373 41681 312b-4 .016” .0001” 1.5” 0-4-0
74.111374 41682 312b-20 .060” .001” 1.0” 0-15-0
74.111965 41716 312b-15 .060” .0005” 1.5” 0-15-0
Metric Model
74.111375 41683 312-1V 0.01mm 1,6mm 37.5mm 0-40-0
$256.00 $230.00
$250.00 $225.00
$233.00 $210.00
$310.00 $279.00
$330.00 $297.00
$238.00 $214.00
$236.00 $212.00
$297.00 $267.00
$293.00 $264.00
$233.00 $210.00
$329.00 $296.00
$256.00 $230.00
Base Assembly Articulating Arm
Part No. EDP No. L W H Dimensions (H & L) List Price Sale Price
01690031 29433 2.36” 1.97” 2.17” H=12.2” (310mm) L=4.7” (119.38mm) $272.00 $231.00
01690032 29434 2.36” 1.97” 2.17” H=15.36” (390mm) L=11” (280mm) $345.00 $293.00
01690033 29435 2.36” 1.97” 2.17” H=14.3” (363mm) L=11” (280mm) $413.00 $351.00
01690030 29432 1.18” 1.18” 1.18” H=8.07” (205mm) L=7.9” (200.66mm) $243.00 $207.00
INTERAPID ® Magnetic Supports
Standard model and models with powerful
holding force
Contact Points —
Catalog No. EDP No. Tip Dia. Length
74.105996 41647 .080” .6875”
74.105997 41648 .060” .6875”
74.105998 41649 .031” .6875”
74.111492 41698 .080” 1.75”
74.111493 41699 .031” 1.75”
74.111912 41712 .100” 2.75”
74.111913 41713 .080” 2.75”
Accessories —
Catalog No. EDP No. Description
74.106331 41651 Height Gage Bar
74.106353 86268 Holding Pin
74.106931 41656 Axial Support (Inch)
74.108603 41663 Universal Clamp
$18.70 $17.00
$18.70 $17.00
$18.70 $17.00
$33.00 $30.00
$33.00 $30.00
$25.00 $23.00
$25.00 $23.00
$54.00 $49.00
$13.40 $12.00
$59.00 $53.00
$33.00 $30.00
Catalog No. EDP N0. Description List Price Sale Price
16.39017 88418 V-block, Measuring Force = 600N $253.00 $228.00
16.39018 28643 V-block, Measuring Force = 1,000N $345.00 $311.00
16.39019 28644 V-block, Fine-Adjuct Measuring Force = 1,000N $471.00 $424.00
18
19

Magnetic Bases
Heavy Duty Flexbar Holder
with MAGNICATOR Base
599-7742-7
Upright: .987” dia./
7-13/16” length.
Holding Rod: .738” dia./
10-1/16”
599-7905
Upright: .738” dia.
Magnicator -
A simple push-button
turns magnetic holding
power on & off!
Catalog No. EDP No. Description List Price Sale Price
599-7770 44925 MAGNICATOR Base.
Flexbar & Fine Adjust $321.00 $273.00
Catalog
No.
EDP
No. Description
Base Assembly
(L, W, H)
Measuring
Force (N)
List
Price
Sale
Price
599-7742-7 44902 Permanent Magnet 2.75”, 2.4375”, 400N
Base Holder, Upright 2.4375”
and Holding Rod
$733.00 $624.00
599-7905 44964 Permanent Magnet 2.75”, 2.4375”, 400N
Base and Upright 2.4375”
$346.00 $311.00
599-7746 44908 Magnicator with 1.875”, 1.625”,
Fixed Upright 1.9375” $159.00 $136.00
599-7746-1 45396 Magnicator with
Swivel Upright
1.875”, 1.625”,
1.9375” $193.00 $165.00
599-7747 44909 Magnicator with 7030 1.875”, 1.625”,
BestTest Indicator 1.9375” $363.00 $309.00
599-7748 44910 Magnicator with 7032 1.875”, 1.625”,
BestTest Indicator 1.9375” $388.00 $330.00
Small Size
Magnetic Bases
MITI-MITE Series
Flexbar Holder
with MITI-MITE Magnetic Base
Catalog No. EDP No. Description List Price Sale Price
599-7769 44923 MITI-MITE Base,
Flexbar & Fine-Adjust $132.00 $112.00
Universal Magnetic Indicator Holder
with BesTest Indicator
• Includes an easy-to-read, satin-black, “jet console” face
BesTest indicator with high visibility orange hand
• BesTest Indicator comes with an .080” carbide
contact point and a.250” extension with dovetail
• Complete with powerful permanent magnet
• Overall height: 3.75”
• Features a universal swivel joint with friction movement
Catalog No. EDP No. Description List Price Sale Price
599-7755-1 27071 Universal Mag. Holder w/BesTest $283.00 $241.00
Indicator and Case
Catalog EDP
Base Assembly Post List Sale
No. No. Description
(L, W, H) Type Price Price
599-7764 44918 Heavy Duty 4”, 1.25”, .75” Ball &
Socket $154.00 $131.00
INTERAPID
599-7765 44919 Heavy Duty with 4”, 1.25”, .75” Ball &
Fine Adjust
Socket $163.00 $139.00
Measuring Supports
599-7762 44916 Medium Duty 1.25”, 1.25”, 1.75” Fixed
Upright $83.00 $71.00
599-7763 44917 Medium Duty with 1.25”, 1.25”, 1.75” Fixed
Fine Adjust
Upright $89.00 $76.00
599-7760 44914 Medium Duty 1.25”, 1.25”, 1.75” Ball &
Socket $83.00 $71.00
Catalog No. EDP No. Description List Price Sale Price
599-7761 44915 Medium Duty with 1.25”, 1.25”, 1.75” Ball &
16.39003 28645 Measuring Support - Small $449.00 $404.00
Fine Adjust
Socket $89.00 $76.00
16.39004 27527 Measuring Support $707.00 $636.00
599-849 51083 Miti-Mite Base w/BesTest 1.25”, 1.25”, 1.75” Ball &
Additional specifications available in Brown & Sharpe Metrology Equipment Catalog Page H-11.
20 599-7030-3 and Case
Socket $317.00 $269.00
Indicator sold separately.
21

Toolmaker’s Vise
Handy for use in drilling, fitting and laying
out work on surface plates. Tongue on large
jaw slides in groove in base and is held in
place by a strap that prevents jaw from lifting.
1-15/16” capacity. Furnished with two steel
jaws as shown.
Catalog No. EDP No. List Price Sale Price
599-752-3 51852 $140.00 $126.00
Precision Toolmaker’s Vise
The ultimate in precision vises offering unlimited uses.
Precision ground and hardened to RC 58-62.
The movable jaw with ground horizontal and vertical
vees pulls onto the base at 45° to 60°. This ensures
maximum holding power and holddown force and
eliminates tilting and lifting.
Catalog No. EDP No. Dimensions (in) Capacity (in) List Price Sale Price
599-9225-5 26972 5-7/8 x 2 x 2 3-1/4 $549.00 $467.00
Square and parallel within .0002 in
Toolmaker’s Clamps
Steel, case hardened. Ends of jaws
chamfered for clamping under shoulder or
in recess. Clip holds loose jaw in position
when clamp screw is released, a convenient
and original Brown & Sharpe feature.
Catalog No. EDP No. Jaws Open (in) Length Jaws (in) List Price Sale Price
599-754-8-2 28314 1-1/4 2-1/8 $39.00 $33.00
599-754-12-2 28315 2-1/4 2-3/4 $41.00 $35.00
599-754-20-2 28316 2-3/4 4 $15.90 $14.00
599-754-28-2 28317 3-1/2 5 $27.00 $23.00
Ultra Thin Parallel Set
Set of 10 pairs. Supplied in custom molded case
• Made from high-grade alloy steel, hardened and
ground from 1/32” stock with 2 holes in
each parallel
• 10 pairs, 6” length, 1/32” width
• 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”,
1-3/8”, 1-1/2”, 1-5/8”
• Height specifications relate to consistency
within each pair. Absolute heights are nominal
Catalog No. EDP No. Length List Price Sale Price
599-921-20 26884 1/32”W x 6”L $157.00 $133.00
Ultra Precision Parallel Set
Set of 10 pairs. Supplied in custom
molded case
• Made from high-grade alloy steel, hardened and
ground from 1/8” stock with 2 holes in each parallel
• 10 pairs, 6” length, 1/32” width
• 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”, 1-3/8”,
1-1/2”, 1-5/8”
• Height specifications relate to consistency within each pair.
Absolute heights are nominal
Catalog No. EDP No. Length List Price Sale Price
599-921-10 86615 1/8”W x 6”L $284.00 $242.00
Steel Parallel Set
Set of 9 pairs. Supplied in custom molded case
• Made from high-grade alloy steel, hardened and ground
from 1/4” stock with 2 holes in each parallel
• 9 pairs, 6” length, 1/4” width
• 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”,
1-5/8”, 1-3/4”
• Height specifications relate to consistency within each pair
• Absolute heights are nominal
Catalog No. EDP No. Length List Price Sale Price
599-921-4 26882 1/4”W x 6”L $342.00 $291.00
22 23

Universal 1-2-3 Block Set
Universal 1-2-3 Blocks Set Consisting of a matched pair
of 1”x 2” x 3” blocks, five plated 5/16-18 socket head
cap screws and a hex key wrench.
• “Shop-hardened” molded case
• Each block is precision ground and case
hardened on all 6 surfaces
• Surface finish 6 to 16 microinches
• Squareness on all sides to .0001”
• There are a total of 11 holes on three faces Five 5/16 - 18 tapped holes arranged for
holding down and for conversion to an angle plate. Six holes drilled through with deep
recesses for easy clamping
• Blocks are oversized to allow for normal lapping to .0003”
Catalog No. EDP No. List Price Sale Price
599-750-50 27396 $91.00 $77.00
Ultra Precision Ground
1-2-3 Blocks Set
Supplied in custom molded case.
Ideal for precision layout and setup.
• Each block is ground and case hardened on all six surfaces
• Surface finish 6 to 16 microinches
• Squareness on all sides to .0001”
• 23 holes: 5 tapped 3/8-16
• Oversized to allow for normal tapping .0001” - .0003”
• Case hardened to 50-60 HRC
• Set consists of a pair of 1x2x3 inch blocks, five 3/8-16 stainless steel socket head
cap screws and a hex key wrench
Catalog No. EDP No. List Price Sale Price
599-750-10 26764 $76.00 $65.00
Adjustable Parallel Sets
Tapped Holes
Used for checking, marking, or positioning work.
• Clamp screws lock parallels to size
• Handy gages for measuring inside dimensions of recesses or slots, or for setting tools
Catalog EDP
No. No. Range No. of Parallels List Price Sale Price
599-673-10 44515 3/8” to 1-5/16” 4 $106.00 $90.00
599-673-20 44516 3/8” to 2-1/4” 6 $156.00 $133.00
Ultra Precision Wavy Parallel Set
Ultra Precision Wavy Parallel Set reliable and precise vertical positioning
of workpieces.
• Parallel within ±.0002” — paired ±.0002”
• Made of high quality spring steel, hardened, stress
relieved and precision ground
• Includes 9 pairs 4-1/4” in length, with the
following heights: 1/2”, 5/8”, 3/4”, 7/8”, 1”,
1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”
• Shims can be compressed, which is useful in the
holding thin parts
• Complete with fitted wooden case
Catalog No. EDP No. List Price Sale Price
599-921-25 27279 $154.00 $131.00
Ultra Precision 12-Piece Angle Block Set
Complete with a protective
“shop-hardened” molded case.
• Precision ground hardened steel
• Angular accuracy .0001” per inch, ± 30 arc seconds
• 3” long x 1/4” thick
• Simple, quick angle setups
• Eliminate calculations and avoid errors
• Complete set of 12 blocks: 1/4°, 1/2°, 1°, 2°, 3°, 4°,
5°, 10°, 15°, 20°, 25°, 30°
Catalog No. EDP No. List Price Sale Price
599-921-18 26883 $225.00 $191.00
Workshop Square Set
Complete in a shop-hardened, protective
molded case!
• Squareness of the blade edge to the
working face of stock is .0006”
Catalog No. EDP No. Description Blades List Price Sale Price
599-540-246 27061 3-Pc. Square Set 2”, 4”, & 6” $75.00 $64.00
599-540-2346 27060 4-Pc. Square Set 2”, 3”, 4”, & 6” $94.00 $80.00
24 25

Edge Finders & Audible Edge Finders
• Available in three sizes: 1/2”, 3/8”, and 10mm
• Hardened and ground on all working surfaces
Telescoping Hole Gages
Satin-chrome finish
Completely assembled with handle.
Knurled lock maintains the setting of
the measuring arms to permit sizing
with a micrometer or caliper.
4 Piece Set:
• Range: 5/16” to 2-1/8” diameter
6 Piece Set:
• Range: 5/16” to 6” diameter
Audible Edge Finders
help assure accuracy by
releasing an audible click
when the tip jumps.
This allows the operator
to listen as well as
watch the tool.
Catalog No.
Edge Finders EDP No. End Size List Price Sale
599-792-2 27030 S 3/8” x .200” $12.90 $11.00
599-792-3 27031 S 1/2” x .200” $13.70 $12.00
599-792-4 27032 D 3/8” x .200” $17.20 $15.00
599-792-5 27033 D 1/2” x .200” $17.80 $15.00
599-792-11 27036 S 10mm x .375 x 10mm $15.40 $13.00
599-792-12 27037 S 10mm x 10mm $15.40 $13.00
599-792 44595 S 1/2” x .500” $13.70 $12.00
Audible Edge Finders
599-792-20 27038 S 3/8” x .200” $15.40 $13.00
599-792-21 27039 S 1/2” x .200” $16.20 $14.00
599-792-22 27040 S 10mm x .375” x 10mm $17.80 $15.00
599-792-23 27041 S 10mm x 10mm $17.80 $15.00
599-792-24 27042 S 1/2” x .500” $16.20 $14.00
Edge Finder Set
599-792-9 28447 1/4”, 3/8”, 1/2”, 3/4” $57.00 $48.00
Audible Edge Finder Set
599-792-19 28448 1/4”, 3/8”, 1/2”, 3/4” $67.00 $57.00
S = single, D = double
Catalog No. EDP No. Description Range List Price Sale Price
599-591-10 45368 4 Piece Set 5/16” to 2-1/8” dia. $106.00 $90.00
599-591-20 45369 6 Piece Set 5/16” to 6” dia. $140.00 $119.00
Sine Bar Riser Kit and Value-Line 5”
Quickly measure the desired angle
in a machine setup
Sine Bar:
• 5”, hardened and precision ground
• 1” body size, top parallel to bottom
of rods within .0002”
Risers:
• 18 risers from 1/2° to 15°, 1/4°
and 1/2° T.P.F.
• Exact constant within .0001
Catalog No. EDP No. Description List Price Sale Price
598-291-600 27264 Sine Bar Riser Kit $185.00 $157.00
598-291-500 29686 5” Sine Bar (only) $56.00 $48.00
26 27

Combination Square Sets
Industry’s most versatile tool
Combination squares are commonly used
for layout, setup, checking heights and
depths and setting angles. They are
also often used as try squares, center
gages, bevel protractors and rules.
• Square heads and protractors
are supplied with levels
• Square heads also include a hardened steel scriber
• Square heads and center heads are made from hardened steel
• Inch, metric or inch/metric reading combination squares are available
Components may be purchased separately.
EDP Blade List Sale
Catalog No. No. Size Includes Price Price
599-400-1204-1 44159 12” Square Head (Hardened) $145.00 $109.00
Center Head (Hardened)
599-438-1204-1 44193 12” Square Head (Hardened) $230.00 $173.00
Center Head (Hardened)
Protractor (Reversible)
Satin Chrome Blade.
All blades graduated in, 8ths, 16ths, 32nds, and 64ths.
Protractor Square
Inclinometer
Catalog EDP Numerical Smallest Measur. For List Sale
No. No. Indication Division Magnification Face Shafts(mm) Price Price
53.31300 87190 4 x 90° 1° 7 – 17’ 180 x 22 15-55 $813.00 $732.00
Protractor Spirit
Inclinometer
Catalog EDP Numerical Smallest Measur. For List Sale
No. No. Indication Division Magnification Face Shafts(mm) Price Price
Square model with fine adjust device for the pivoting vial
53.31150 88138 90° 10’ 1’ 50 x 40 19-108 $2,405.00 $2,165.00
Model with frame and fine adjust device for the turning vial
53.31700 86729 2 x 180° 3’ 1’ 150 x 40 19-108 $2,418.00 $2,176.00
TESA ® Spirit Levels
Scale
Interval Measuring For Shafts Dimensions List Sale
Catalog No. (mm/m) Face (mm) (mm) (mm) Price Price
Tubular spirit levels with a prismatic measuring face, Ω-shaped
05331650 1.0 100 x 30 x 35 17 – 80 32 $298.00 $268.00
05331651 0.3 100 x 30 x 35 17 – 80 32 $308.00 $277.00
05331652 0.3 150 x 30 x 35 17 – 80 32 $345.00 $311.00
05331653 0.3 200 x 30 x 35 17 – 80 32 $433.00 $390.00
Tubular spirit levels with a flat measuring face
05331250 0.1 80 x 9, Ø 16 — ø 16 $283.00 $255.00
05331251 0.3 80 x 9, Ø 16 — ø 16 $271.00 $244.00
05331252 0.1 100 x 10, Ø 20 — 20 $298.00 $268.00
05331253 0.3 100 x 10, Ø 20 — 20 $283.00 $255.00
05331254 0.05 150 x 11, Ø 22 — 22 $407.00 $366.00
05331255 0.1 150 x 11, Ø 22 — 22 $333.00 $300.00
05331256 0.3 150 x 11, Ø 22 — 22 $308.00 $277.00
05331257 0.05 200 x 12, Ø 22 — 22 $473.00 $426.00
05331258 0.1 200 x 12, Ø 22 — 22 $407.00 $366.00
05331259 0.3 200 x 12, Ø 22 — 22 $345.00 $311.00
Transmission shaft spirit levels with side viewing slots
53.31350 0.05 100 x 30 x 35 17 – 80 — $641.00 $577.00
53.31351 0.3 100 x 30 x 35 17 – 80 — $473.00 $426.00
05331352 0.1 200 x 30 x 35 17 – 80 — $765.00 $689.00
Precision Spirit Level,
Magnetic Square Model
For inspecting and aligning flat and cylindrical surfaces
in horizontal orvertical position –
Attaches magnetically on flat and cylindrical surfaces
– Fitted with insulating handle.
Catalog EDP Scale Interval Measuring For Shafts
No. No. (mm/m) Face (in) (in) List Price Sale Price
53.31000 27498 0.02 5.90 x 5.90 x 1.57 .75 - 4.25 $1,721.00 $1,549.00
05331001 21138 0.04 5.90 x 5.90 x 1.57 .75 - 4.25 $1,512.00 $1,361.00
53.31002 86594 0.05 5.90 x 5.90 x 1.57 .75 - 4.25 $1,379.00 $1,241.00
28 29

TESA ® ClinoBEVEL 1 USB
Versatile inclinometer with large, easy-to-read
LCD display. Comes complete with USB Cable
and ClinoBEVEL software, providing added
value and versatility.
TESATRONIC ®
Electronic Gage Amplifier Set
•
•
•
•
•
•
•
Calculate inclinations in direct or comparative mode
Export calculations to ClinoBEVEL software for
analysis and reporting
Reinforced aluminum housing
Measuring Range: ±45°
Accuracy: 2’ + 1 digit
Dimensions: 3.94” x 2.95” x 1.18” (100mm x 75mm x 30mm)
Calibration report included
Catalog No. EDP No. Description List Price Sale Price
05330203 36119 TESA ClinoBEVEL 1 USB $1,686.00 $1,517.00
47.68002 42748 4 batteries, type LRC 6 - 1.5 V, AA $9.50 $9.00
TESA ® ClinoBEVEL 2
Electronic Inclinometer
The top model among inclinometers –
Measuring range ± 45° with angle or inclination
display – Integrated temperature compensation
– Microprocessor controlled auxiliaries for
display setting and inclinometer adjusting –
Instrument output split for comparative
measurements etc.
Includes:
• TT60 or TT80 Amplifier
• Measuring stand with table
• Cartridge gage head
(599-982-10)
Catalog No. EDP No. Description List Price Sale Price
53.30202 28798 TESA ClinoBEVEL 2 ± 45° >5” 150 $3,086.00 $2,777.00
Optional accessories
47.68002 42748 4 batteries, type LRC 6 - 1.5 V, AA $9.50 $9.00
Catalog No. Description List Price Sale Price
44.90004P TESATRONIC TT60 Amplifier, Measuring Stand
with Table & Cartridge Gage Head $3,970.00 $3,573.00
44.90005P TESATRONIC TT80 Amplifier, Measuring Stand
with Table & Cartridge Gage Head $4,363.00 $3,927.00
30 31

Order Yours Today!
The 2009
Advanced Metrology Products Brochure
World Headquarters
250 Circuit Dr., North Kingstown, RI 02852-1700
Tel: (800) 283-3600, select option 2, then option 3
Fax: (401) 886-2553
www.brownandsharpe.com
As Brown & Sharpe is constantly improving the design of its products, the appearance,
specifications, dimensions and weights are subject to change without notice.
©2009 Hexagon Metrology, Inc., All Rights Reserved. PMI-922 03/2009