Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
BECAUSE IT COUNTS<br />
Quality is a word that gets used a lot in kiting. At <strong>Ozone</strong>, we don’t use it lightly. When we use it, we mean it. We’re proud of our design and manufacturing and believe they set a<br />
precedent for the rest of the industry.<br />
At <strong>Ozone</strong> quality begins with design; we produce kites with the best quality handling and feel combined with the highest level of performance and safety.<br />
Choosing materials: This is a simple issue, when we choose materials, we base our decision solely upon the fact that the materials we use are the best available for the job.<br />
Kite production: All <strong>Ozone</strong> kites are manufactured in our own facility. We have total control over every aspect of the manufacturing process, and each kite is fully inflated and<br />
inspected to certified paragliding standards before leaving our DHV-approved factory.<br />
Product testing: Your kite has undergone thousands of hours of development, from CAD design through to riding in extreme conditions. Our riders and design team are out testing<br />
all year round in temperatures of -40˚C in Norway to the baking heat and sand blasts of Chile.<br />
SUPERIOR FABRICS DOUBLE STITCHED<br />
<strong>Ozone</strong> kites are double-needle stitched, which is stronger and more durable than single line stitching in the event of the kite being dragged over rough ground. Even our thread<br />
used for stitching the lines and sail is anti-UV coated, bonded thread further adding to the strength and life-span of our kites. Every seam is checked to within 0.5 mm; a look at<br />
how well the colour - scheme on the outside matches, and the accuracy of the seams inside the kite will highlight this fact. Extensive research, testing and development between<br />
<strong>Ozone</strong> and NCV Porcher Marine has led to the release of NCV Porcher A767. We also developed our own cloth which we have named <strong>Ozone</strong>40D. Both Nylon Rip-Stop fabrics<br />
offer an unbeatable blend of UV resistance, stiffness and tear resistance.<br />
MYLAR EDGED<br />
Aerodynamics tell us that the leading and trailing edges are the two most critical lines in an aerofoil section. <strong>Ozone</strong> kites are Mylar taped for the leading edge cell openings, giving<br />
a more rigid structure, a clean and efficient aerofoil and absolutely zero stretching. The Mylar tape effectively locks the sail shape, meaning your kite keeps its factory trim. Just<br />
remember that only a 1mm error on a cell in a kite with 30 cells leads to an overall error of 3cm, this can make a marked difference to a kites handling, performance and safety! It’s<br />
why we started our own factory.