PDF Download - Glidewell Dental Labs

More documents

Recommendations

Info

Alternate Uses of the Laboratory Jig ® Screw-Retained BruxZir Solid Zirconia Crown The use of a jig is not limited solely to custom implant abutments. It may also be used to seat single-unit, screw-retained restorations. The following images (Figs. 10, 11) illustrate a screw-retained BruxZir ® Solid Zirconia crown with jig, as prepared on a laboratory model. Multiple-Unit Bridge A jig may also be used for multi-unit applications. The following images (Figs. 12–14) illustrate a pair of Inclusive Titanium Abutments with accompanying jig, as prepared on a laboratory model. In this case, the abutments will be used to support a multi-unit bridge. Figure 10: Checking Torque Wrench Driver access for a jig on a screw-retained BruxZir crown. Figure 11: Screw-retained BruxZir crown on model Figure 12: Jig carrying tooth #18 and #19 abutments; jig for tooth #21 seated Figure 13: Jigs and abutments on model Figure 14: Inclusive Titanium Abutments seated on model 32 – www.inclusivemagazine.com –
Delivery of a Screw-Retained BruxZir Solid Zirconia Crown The same procedure used to seat an Inclusive Custom Abutment can be used to ensure proper seating of a screw-retained BruxZir Solid Zirconia crown, as demonstrated by the following images (Figs. 15–17b). Figure 15: Jig used to carry and seat a screw-retained BruxZir crown Figure 16: Abutment screw tightened to recommended torque 17a 17b Figures 17a, 17b: Seated screw-retained BruxZir crown Summary All-zirconia custom implant abutments offer a natural esthetic and significant abutment connection strength, but the short length of the abutment connection can pose a clinical challenge when it comes to proper seating. Using the jig-assisted delivery technique outlined above makes the process of seating any Inclusive Custom Implant Abutment quick and convenient, no matter the length of the implant-abutment connection. It works well for single-unit restorations, and even better for bridges, where a single jig is used to seat multiple units. (This is typically limited to three units per jig, as larger spans can become cumbersome to handle in the mouth.) With this method, doctors have seated a full-arch roundhouse in a matter of minutes. All the clinician has to do is ensure proper alignment between abutment and jig, and then again between jig and implant site. If the lab has done its job correctly, the precise nature of digital CAD/CAM processing will ensure a successful outcome every time. IM – Lab Corner: Accurately Seating Inclusive Custom Abutments Using an Acrylic Jig 33
Page 1 and 2: Inclusive® Restorative Driven Impl
Page 3: Contents 6 15 From Intraoral Scan t
Page 6 and 7: Contributors ■ Bradley C. Bockhor
Page 8 and 9: From Intraoral Scan to Final Custom
Page 10 and 11: Figure 4: Healing abutments at six
Page 12 and 13: Figure 15: iTero virtual scan (Alig
Page 14 and 15: Figure 25: 4-unit BruxZir Solid Zir
Page 17 and 18: Implant Q&A: An Interview with Dr.
Page 19 and 20: Not only are we maintaining the bon
Page 21: BB: If you go that route — four i
Page 24 and 25: For proper prosthetic function, zir
Page 26 and 27: On the abutment, there were three a
Page 28: Finite element analysis (FEA) provi
Page 31 and 32: Figure 1: Graph depicting usage of
Page 33: Clinical Delivery The following pro
Page 39 and 40: Figure 1: Preoperative digital trea
Page 41 and 42: Figure 8: Inclusive Mini Implant Im
Page 43 and 44: Figure 16: Wax rim delivered on cas
Page 45 and 46: Figure 26: Articulated model with b
Page 47 and 48: Implant-retained overdentures can o
Page 49 and 50: Figure 2: Sagittal MPR view with ma
Page 52 and 53: Understanding Zirconia Crown Esthet
Page 54 and 55: Spectrophotometry A spectrophotomet
Page 56 and 57: The key to increasing light transmi
Page 58: Inclusive ® Image Contest: Name Th

PDF Download - Glidewell Dental Labs

Create successful ePaper yourself

Delete template?

Save as template?