Chairside Magazine Volume 2, Issue 1 - Glidewell Dental Labs
Chairside Magazine Volume 2, Issue 1 - Glidewell Dental Labs
Chairside Magazine Volume 2, Issue 1 - Glidewell Dental Labs
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Dr.DiTolla’s<br />
CLINICAL TIPS<br />
Dr.DiTolla’s<br />
CLINICAL TIPS<br />
PRODUCT.............. Cyclone/Cyclone DS<br />
CATEGORY........... Topical Anesthetic<br />
SOURCE................ Steven’s Pharmacy, Costa Mesa, CA<br />
1-800-352-DRUG<br />
PRODUCT.................................Zir-Cut<br />
CATEGORY..............................Carbide Bur<br />
SOURCE...................................AXIS <strong>Dental</strong>, Coppell,<br />
TX<br />
Zir-Cut burs are absolutely necessary when replacing<br />
zirconia-based restorations.<br />
New from Axis <strong>Dental</strong> are Zir-Cut burs, filling a need just<br />
recently created. It’s a huge time-saver, too. Zirconia-based<br />
restorations entered the market a few years ago and are now<br />
hitting their strides. Two of the newer systems (LAVA from<br />
3M ESPE and Prismatik CZ from <strong>Glidewell</strong> <strong>Labs</strong>) are so strong<br />
that nothing will cut efficiently through their zirconia substructures.<br />
Enter the Zir-Cut burs, absolutely necessary when<br />
replacing these all-ceramic, cementable restorations.<br />
Even if you aren’t placing zirconia restorations (which I now<br />
do routinely), one day you will have to take off a zirconia<br />
crown placed by another dentist, and you’d better have some<br />
Zir-Cut burs on hand!<br />
PRODUCT.................................Razor<br />
CATEGORY..............................Carbide Bur<br />
SOURCE...................................AXIS <strong>Dental</strong>, Coppell,<br />
TX<br />
This amazing new bur will fly through both porcelain and<br />
metal on any PFM with no problem.<br />
The new Razor carbide bur from Axis <strong>Dental</strong> is a huge time<br />
saver! This amazing bur will fly through porcelain and metal<br />
on any PFM with no problem. I used to use an old diamond<br />
to cut through the porcelain and then would switch to a 57 or<br />
557 bur to cut through the coping. In addition to having these<br />
burs snap far too often, the chatter they would make as they<br />
cut through the metal was horrible!<br />
In contrast, a new Razor will fly through the porcelain and<br />
continue straight through the metal with no chatter at all. On<br />
certain cases (usually those with semi-precious or high-noble<br />
substructures), I have used the same Razor bur to remove 4 or<br />
5 entire crowns. Just order a couple of them in the 57 size and<br />
shape and you will see what I mean, especially if you have an<br />
electric handpiece like I do.<br />
We offer Cyclone DS to almost anyone having something<br />
done who is not getting local anesthesia.<br />
If you can remember about 10 years ago, there was a<br />
product named Dyclone, which was a topical anesthetic in<br />
liquid form that patients could swish with for one minute<br />
to anesthetize gingival and palatal tissues. It was fantastic<br />
for hygiene patients who need some anesthesia, but don’t<br />
want local infiltrations or blocks. It also worked well for<br />
needle-phobic sensitive hygiene patients, and for patients<br />
who gag during impressions. I searched the FDA database<br />
and found that the company decided to stop producing for<br />
their own reasons. The FDA verified that it had nothing to<br />
do with the safety or efficacy of the product.<br />
Steven’s Pharmacy’s replacement product is called Cyclone<br />
and it is available in the original strength that we used to<br />
use, 0.5%, and also in a double-strength solution called<br />
Cyclone DS that is a 1.0% solution. We have settled on<br />
the Cyclone DS as our choice because we have noticed<br />
no difference between the two solutions, except that the<br />
Cyclone DS works better on most patients.<br />
We use it on anyone who is worried about having impressions<br />
taken, whether it is for Invisalign or bleaching trays<br />
or even just study models. We use it on full arch crowns<br />
and bridge impressions when we are worried about the<br />
patient gagging while we try to capture the detail of multiple<br />
preps. We will even use it prior to taking our digital<br />
x-rays on patients who are worried about gagging.<br />
On the hygiene side, we use it for periodontal probing for<br />
patients with inflammation as well as for gross debridement<br />
patients who are sensitive. We see a lot of patients<br />
who are overdue for hygiene but do not need scaling and<br />
root planing. Since we typically only use local anesthetic<br />
for our root planing patients, Cyclone helps fill the gap by<br />
being an easy-to-use topical that provides peace of mind<br />
for the patients.<br />
The bottom line is that we offer Cyclone to almost anyone<br />
having something done who is not getting local anesthesia.<br />
We do not charge for this service, although there are<br />
dentists who have told me that they charge a small fee for<br />
it (typically $5.00) and that patients are happy to pay it.<br />
We don’t charge for local anesthetic, of course, and we feel<br />
that this falls into the same category.<br />
Dr. DiTolla’s Clinical Tips<br />
Dr. DiTolla’s Clinical Tips