Sinergroup Reverse osmosis - spare parts solenoid valves sensors Catalog

INDEX 

Solenoid valves ................................................................................................................................................... 3 

Anti leaking systems .......................................................................................................................................... 6 

Water purity testers ............................................................................................................................................ 7 

Sensors ................................................................................................................................................................ 16 

Pressure switch .................................................................................................................................................. 18 

Shut-Off valves .................................................................................................................................................... 20 

Flow Restrictors .................................................................................................................................................. 21 

Booster pumps .................................................................................................................................................... 23 

Vane pumps ......................................................................................................................................................... 25 

Engines vane pumps .......................................................................................................................................... 27 

Accumulator tanks .............................................................................................................................................. 28 

Control unit .......................................................................................................................................................... 31 

Plugs switches cables ........................................................................................................................................ 32 

Miscellaneous ..................................................................................................................................................... 33

Solenoid valves 

Code: 060001 

Auto-Flushing Valve 24VDC 

Code: 060002 

Solenoid valve 24VDC NC female 1/4" FTP w/filtering mesh 

Code: 060003 

Solenoid Valve , Female 3/8" , 24V/110V/220V/240V 20Kg/Cm² 

Orifice 10mm valve body (brass) 

19 June 2014 3/34

Code: 060004 

Floating Valve , Mechanical Style , Tube 1/4" 

Code: 060005 

Floating , Micro-Switch , 10 Ampere 

Code: 060007 

Solenoide valve 3 entrances - 1 OutPut 220V / 24V 

Variants 

Code 

Description 

060007-01 Solenoide valve 3 entrances - 1 OutPut Voltage 220V-AC 

060007-02 Solenoide valve 3 entrances - 1 OutPut Voltage 24V-DC 

3-ways solenoide valve, with body in food grade resin and membrane in platinic silicone 3/4" x 1/4". 

Flow rate: 6,7 Lt/Min - 3,5 bar 

Nominal pressure: 10 bar 

Voltage: 220V - AC 

Voltage: 24V - DC 

19 June 2014 4/34

Code: 060008 

Solenoid valve at one way 220V-AC / 24V-DC / 24V-AC 

Variants 

Code 

Description 

060008-01 Solenoid valve at one way Voltage 220-AC 

060008-02 Solenoid valve at one way Voltage 24V-DC 

060008-03 Solenoid valve at one way Voltage 24V-AC 

1-way solenoide valve with body in food grade resin membrane in platinic silicone 3/4" X 1/4" 



Code: 060009 

Solenoid valve at one way 220V quick fitting 1/4'' 

1-way solenoide valve with body in food grade resin membrane in platinic silicone 3/4" X 1/4" quick fitting. 




Code: 060010 

Solenoid valve at 2 ways 220V-AC 

19 June 2014 5/34

2-ways solenoide valve with body in food grade resin membrane in platinic silicone 3/4" x 1/4" 


Code: 060011 

Solenoid valve 24V-DC / 24V-AC 1/4" FPT - N.C. 

Variants 

Code 

Description 

060011-01 Solenoid valve 24V-DC / 24V-AC 1/4" FPT - N.C. 

060011-02 Solenoid valve 24V-AC 1/4" FPT - N.C 

Normally closed. 

Code: 060038 

3 ways solenoid valve 1/8" F. 230V - 50Hz - TA:80°C - P:0/18bar 

Normally Closed (NC). 

Anti leaking systems 

Code: 060006 

Anti leak water (sensor + electronic board) 

19 June 2014 6/34

Variants 

Code 

Description 

060006-24 Anti leak water (sensor + electronic board) 24V. 

060006-36 Anti leak water (sensor + electronic board) 36V. 

060006-01 Replacement Anti leak sensor 24, 36V. 

System to stop the water in-let. 

Sensor dipped in gold 

Electronic dedicated PCB 

Electrovalve Mod. 4030-ID00637 not included 

Voltage: 24V or 36V 

Code: 060053 

Leaking sensor's PCB w/wiring complete set 

Set: electronic card + box + aquastop sensor 

Water purity testers 

Code: 060013 

Electrolysis system for reverse osmosis test 

Variants 

Code 

Description 

060013-01 Electrolysis 220 V. 

060013-02 Electrolysis 220V. (Last pieces) 

060013-04 Aluminium electrode replacement for 060013-02 

060013-05 Iron electrode replacement for 060013-02 

19 June 2014 7/34

Code: 060058 

Electrolysis system for reverse osmosis test 

Variants 

Code 

Description 

060058-01 Electrolysis demostration briefcase 24 VDC. 

060058-02 Electrolysis replacement precipitator 

060058-03 Aluminium electrode replacement for 060058-02 

060058-04 Iron electrode replacement for 060058-02 

060058-05 Electrolysis replacement ballast 

060058-06 Empty electrolysis briefcase with foam 

The produced electrolysis process, as well as its viewing, increases intensity and reaction rate depending 

on the quantity of dissolved salts, among other factors. Water increases its electricity proportionally to the 

quantity of dissolved salts it contains. 

Contents of the briefcase: 

* Electrolysis precipitator * 2 aluminium electrodes * 2 iron electrodes * Transformer * 

Code: 060014 

RT-770 In-Line TDS Tester 

Variants 

Code 

Description 

060014-01 RT-770 In-Line TDS Tester AA batteries x 2 - 40ppm. 

060014-02 RT-770 In-Line TDS Tester AA batteries x 2 - 80ppm. 

060014-03 RT-770 In-Line TDS Tester AA batteries x 2- 100ppm. 

060014-04 RT-770 In-Line TDS Tester AA batteries x 2- 150ppm. 

060014-05 RT-770 In-Line TDS Tester 12-24V DC power connection - 40ppm. 




The RT-770 is an in-line and low cost testing device to monitor the quality of pure water which is generated 

by Reverse Osmosis water filters. It measures the conductivity of water and convert it to be TDS reading. 

The measured TDS reading is compared to the pre-setting TDS value. 

The RT-770 turns on RED light if the measured TDS reading is over the pre-setting TDS value. If it’s under 

the pre-setting TDS value, the RT-770 turns on Green light. 

19 June 2014 8/34

Alert options available: 40ppm - 80ppm - 100ppm - 150ppm. 

Features: 

One push-button testing 

Internal battery power or external power 

Easy connected to most of reverse osmosis water filters 

Operating guide 

1-Cut off the outlet tube(between tank of the reverse osmosis water filter and faucet). 

2-Insert the tube into the quick fitting. 

The probe needs to be cleaned every year to avoid scaling which may result into inaccuracy 

testing. 

Specification : 

Dimension : 70mm(L) x 55m(W) x 33mm(D) 

Weight : 80 g 

Cable length : 45 cm. 

Operating : 3000 operating times 

Power : AA batteries x 2 or 3 – 24V DC 

Code: 060015 

RT-790, In-Line Programmable Automatic TDS Tester 

The RT-790 is an in-line and low cost testing device to monitor the quality of pure water which is generated 

by reverse osmosis water filters. It measures the conductivity of water and convert it to be TDS reading. 

The measured TDS reading is compared to the pre-setting TDS value. The RT-790 turns on RED light if the 

measured TDS reading is over the pre-setting TDS value. If it’s under the pre-setting TDS value, the 

RT-790 turns on Green light. 

Feature : 

* Automatic testing or manual testing 

* Internal battery power 

* Easy connected to most of reverse osmosis water filters 

Connecting Fitting 

Cut off the outlet tube (between tank of the reverse osmosis water filter and faucet). Insert the tube into the 

quick fitting 

Operating 

Automatic testing: 

a)Testing per hour. 

b)If testing resistance value is bigger than setting resistance value, it isn’t displayed on LCD. 

c)If testing resistance value is smaller than setting resistance value, it will be recorded. After five times 

record, it will enter into warning status and stop testing. 

Manual testing: 

a)Press the button for testing. 

19 June 2014 9/34

)If testing resistance value is bigger than setting resistance value, the blue light will flash five times and 

enter into automatic testing model. 

c)If testing resistance value is smaller than setting resistance value, after red light flashing and alarm 

warning five times, it will enter into warning status and stop testing. 

5.4 Reset Use stick to keep pressing the “RESET” button for 4 seconds or reset the batteries. 

The probe needs to be cleaned every year to avoid scaling which may result into inaccuracy testing. 

Specification : 

* Dimension : 70mm(L) x 55m(W) x 33mm(D) 

* Weight : 80g. 

* Cable length : 45 cm. 

* Operating : 3000 operating times 

* Power : AA batteries x 2 

* Operating current : 1 mA@3V DC 

Code: 060016 

Quick Check TDS/Conductivity Monitor 

Press the "Push-to-Check" button for an instant water quality check! 

FEATURES 

* With the push of a button, the unit displays a green or red light, indicating good water quality or service 

required, respectively. 

* Tests for TDS or conductivity levels. 

* Eight programmable set points (by dip switch). 

* Bright LED lights. 

* Simple to use. 

* Factory Calibrated to 100 ppm NaCl. Re-calibration is unncessary. 

* Comes equipped with Mur-lok® Quick-Connect T-fitting (1/4 inch standard, also available in 3/8" or 1/2" ). 

* Excellent Reverse Osmosis (RO) or Deionization (DI) monitor. 

* Installs quickly and easily. 

SPECIFICATIONS 

TDS/EC Range: 0-5000 ppm (10,000 µS) 

Max. Set Point: 50 ppm (100 µS) 

Accuracy: ±3% 

ATC: No 

Cable Length: 24.5" (including sensor) 

Fittings: 1/4" 

Power source: 4 x 1.5V button cell batteries (included) 

Battery life: Approx. one year 

Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.) 

19 June 2014 10/34

Code: 060017 

Quick Check TDS LCD Monitor 

Ideal for any water filtration system, including reverse osmosis systems, coolers and much more. 

FEATURES 

* Displays TDS level of a single water line. 

* Highly efficient and accurate due to its advanced microprocessor technology. 

* Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. 

* Wide Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the 

resolution is 10 ppm, indicated by a blinking 'x10' image.) 

* Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated 

with a mini-screwdriver. 

* Comes equipped with Mur-lok® Quick-Connect T-fitting (1/4 inch standard, also available in 3/8" or 1/2" ). 



Range: 0-9990 ppm 


Conversion Factor: NaCl (avg. 0.5) 


Fittings: 1/4" standard, also available with 3/8" or 1/2" 


Battery life: approx. 1000 hours of continuous use 

Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.) 

Code: 060018 

DM-1 In-Line Dual TDS Monitor 

Measure the tap water coming in vs. the purified water going out of your water filtration system at any time. 

FEATURES 

* Displays TDS levels of the feed water and product water with in & out electrode probes. 


* Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. 

19 June 2014 11/34

* Dual Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the 

resolution is 10 ppm, indicated by a blinking 'x10' image.) 



* Comes equipped with Mur-lok® Quick-Connect T-fittings. 







Fittings: 1/4" standard, also available with 3/8" or 1/2" 


Battery life: approx. 1000 hours of continuous use 

Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.) 

Code: 060019 

Dual TDS Sensor Probes for the DM-1 

* Stainless steel sensors 

* Probe: 1/4" 

* Cable: 24.5" 

* Connector: 8-pin 

* Thermometer pins: Yes 

* Each sensor of the pair has a blue or red wrap and labeled "IN" or "OUT" 

* Pressure Rating: 16bar @ +23°C 

Code: 060020 

DM-2 Commercial/residential in-Line Dual TDS Monitor 

Install on industrial systems such as car washes, window washing, manufacturing, and food processing. 

FEATURES 


* Displays TDS levels of the Feed Water and Product Water with in & out electrode probes. 

19 June 2014 12/34

* Auto-Off function conserves battery power. The unit shuts off automatically after 20 seconds. 

* Dual Range - Measures from 0-999 ppm, with a resolution of 1 ppm. From 1000 to 9990 ppm, the 

resolution is in 10 ppm increments, indicated by a blinking 'x10' image. 



* Comes equipped with 1/4 inch Mur-lok® Quick-Connect T-fittings. Also available with 3/8" or 1/2" fittings. 


Differences from the DM-1: 

* Designed for commercial/industrial applications. 

* Stronger, water-resistant casing. 

* Calibration can be done individually or simultaneously on each line. 

* Improved design, including an extra large, easy-to-read LCD display. 

* Longer, waterproof, shielded cables. 

* Variable mounting bracket. 





Cable Length: 46" (including sensor) 

Calibration: Factory calibrated to NaCl 342 ppm. Re-calibration can be done separately for each line, or 

simultaneously for both. 

Power source: 2 x AA batteries (included) 

Battery life: Approx. 12-18 months 

Size: 11.6 x 6.8 x1.8 cm (4.6 x 2.6 x .7in.) 

Code: 060067 

DM-2EC Commercial/residential in-Line Dual Conductivity 

Monitor (5) 

Inline ELECTRICAL CONDUCTIVITY monitor that can be installed on industrial water filtration systems 

such as car washes, window washing, manufacturing, and food processing. 

FEATURES 


* Displays EC levels of the Feed Water and Product Water with in & out electrode probes. 

* Auto-Off function conserves battery power. The unit shuts off automatically after 3 minutes. 

* Dual Range - Measures from 0-999 µS, with a resolution of 1 ppm. From 1000 to 9990 µS, the resolution 

is in 10 µS increments, indicated by a blinking 'x10' image. 

* Factory Calibrated: calibrated to 1413 µS. The DM-2EC features digital calibration. 

* Diagnostic error messaging 

* Shielded sensor cables 

* Comes equipped with 1/4 inch Mur-lok® Quick-Connect T-fittings. Also available with 3/8" or 1/2" fittings. 


Differences from the DM-1: 

* Measures EC (Electrical Conductivity) in µS (micro-Siemens). 

19 June 2014 13/34

* Designed for commercial/industrial applications. 

* Stronger, water-resistant casing. 

* Digital calibration can be done individually on each line. 

* Improved design, including an extra large, easy-to-read LCD display. 

* Longer, waterproof, shielded cables. 

* Variable mounting bracket. 


* Range: 0-9990 µS 

* Accuracy: ±2% 

* Cable Length: 46" (including sensor), shielded cables 

* Sensor: Dual, 1/4" diameter for quick-connect fittings (model SP-3, included) 

* Digital Calibration: Digitally factory calibrated to 1413 µS. Re-calibration can be done separately for each 

line. 

* Power source: 2 x AA batteries (included) 

* Battery life: Approx. 2 years 

* Size: 11.6x6.8x1.8cm (4.6x2.6x.7in.) 

Code: 060021 

Dual TDS Sensor Probes for the DM-2 


* Probe: 1/4" 

* Cable: 45" (114,3 cm.) 

* Connector: dual 4+4-pin 

* Thermometer pins: Yes 

* Each sensor of the pair has a blue or red wrap and labeled "IN" or "OUT" 


Code: 060054 

PM1 OEM In-Line TDS purity monitor 

An ideal monitor/alert for water coolers and other enclosed water purification systems. Alerts a user when 

the filtration system requires service. 

FEATURES 

* OEM single line internal TDS monitor that is ideal for enclosed water purification systems. 

19 June 2014 14/34

* Includes a light and optional alarm that alerts the user service is required when the TDS level reaches the 

pre-programmed set-point. 

* User-defined set points (any even number between 2 and 200). 


* Range: 0-200 ppm (mg/L) * Accuracy: +/- 2% * Calibration: Factory calibrated * Alert: Warning light, 

optional alarm * Light color: Either red or yellow * Light function: Either flashes or is steady * Alarm: Beeps 

for 20 seconds, then goes silent * Power Source: AC 110V / 220V ±2% * Cable Length: 62.86 cm (24.75") * 

Fittings: 1/4" standard, also available with 3/8" or 1/2" * Max. Water Pressure: 200 PSIG (at 23°C with a 

1/4" fitting) * Circuit Board Dimensions: 8.9 x 6.9 x 3.8 cm (3.5 x 2.7 x 1.5 in.) * Weight: 266.5 g (9.4 oz.) 

Code: 060065 

PM-2 external In-Line TDS Purity Monitor 220V.,110V. 

Variants 

Code 

Description 

060065-01 PM-2 external In-Line TDS Purity Monitor 220V. 

060065-02 PM-2 external In-Line TDS Purity Monitor 110V. 

An ideal monitor/alert for water coolers and other enclosed water purification systems. Alerts a user when 

the filtration system requires service. 

FEATURES 

* External single line internal TDS monitor that is ideal for most water purification systems. 

* Includes a light and optional alarm that alerts the user service is required when the TDS level reaches the 

pre-programmed set-point. 

* User-defined set points (any even number between 2 and 200). 


* Range: 0-200 ppm (mg/L) * Accuracy: +/- 2% * Calibration: Factory calibrated * Alert: Warning light, 

optional alarm * Light color: Either red or yellow * Light function: Either flashes or is steady * Alarm: Beeps 

for 20 seconds, then goes silent * Power Source: AC 110V / 220V ±2% * Cable Length: 62.86 cm (24.75") * 

Fittings: 1/4" standard, also available with 3/8" or 1/2" * Max. Water Pressure: 200 PSIG (at 23°C with a 

1/4" fitting) * Dimensions: 12.9 x 7.3 x 6 cm (5 x 2.9 x 2.4 in.) * Weight: 340 g (12 oz.) 

19 June 2014 15/34

Sensors 

Code: 060022 

Dual TDS Sensor Probes 


* Probe: 1/4" 

* Cable: 24,5" (62,22 cm.) 

* Connector: dual 4-pin 

* Thermometer pins: No 

* Each sensor of the pair has a blue and yellow wrap and labeled "IN" and "OUT" 


Code: 060023 

Single TDS Sensor Probes 

* Stainless steel sensor 

* Probe: 1/4" 

* Cable: 45" (114,30 cm.) 

* Connector: Single 4-pin 

* Thermometer pin: Yes 

* Sensors have a green wrap and no label 


19 June 2014 16/34

Code: 060024 

In-line flow sensor 

The FS-2000(H) flow sensor comes with a reed switch or Hall effect switch which delivers a switch signal or 

digital signal to electronic control unit when it is activated by the magnetic force of the flow sensor turbine. It 

can detect water flow from 1.7 to 14.1 L /min. 

The connection of the FS-2000(H) is 3/ 8” NPT female. 

Its body and turbine are made of acetal copolymer (POM) material. 

The best location to connect the FS-2000(H) is on the outlet channel of the filter. 

Because it's sensitive to rust and dirt. It could be installed at vertical or horizontal position. 

For most of residential water filters and coolers, the FS-2000(H) is an ideal flow measurement and control 

solution for filter life or water dispensation monitor , it detects precisely, works reliable and is most 

affordable. The FS-2000(H) is compatible with the PWA 608M , the electronic flow monitor control board 

and the PWA608T, the electronic flow totalizer control board. 

Switching Voltage : Max. 200 Volts 

Switching Current : Max. 0.5 Amps 

Carry Current : Max. 1.5 Amps 

Switching Frequency : Max. 500 Hz 

Contact Resistance : Max. 150 mO 

Life Expectancy : 1 x 108 Ops 

Mounting Method: Horizontal to Vertical 

Flowing Direction: Bi-Direction 

Flow Rate: 

Maximum 3.72 gpm, 14.1 lpm (vertical and horizontal mounting) 

Minimum 0.40 gpm, 1.50 lpm (horizontal mounting) 

Minimum 0.26 gpm, 1.00 lpm (vertical mounting) 

Calibration: 

0.00106 gallon, 0.004 liter per pulse 0.00088 gallon, 0.0033 liter per pulse (vertical mounting) 

Connection: 3/8 inch NPT Female 

Temperature: 0 to 40? (32 to 104 ?) 

Pressure: Max. 6.0 bar (85 psi) 

Weight: 50g (1.92 oz.) 

Accuracy: +/- 10% 

Materials: Sensor Body : Acetal Copolymer, TICONA M90 

Turbine: Acetal Copolymer, TICONA M90 

Stick of Turbine: #304 Stainless Steel 

O-Ring: E.P.D.M. 

19 June 2014 17/34

Code: 060057 

TDS Sensor Probes for the RT-770, RT-790 

For models: 060014 * 06015 

Pressure switch 

Code: 060025 

Low Pressure Switch 1/4'' 

Code: 060026 

Low Pressure Switch 

19 June 2014 18/34

Code: 060027 

High Pressure Switch (15-30 psi) (20-40 psi) , Female Type 1/4'' 

Variants 

Code 

Description 

060027-01 High Pressure Switch (15-30 psi) 1/4'' female 

060027-02 High Pressure Switch (20-40 psi) 1/4'' female 

15 - 30 psi (1 psi = 0.07 bar) adjustable high-pressure pressure, switch for equipment with pump. 

20 - 40 psi (1 psi = 0.07 bar) adjustable high-pressure pressure, switch for equipment with pump. 

Code: 060028 

High Pressure Switch (20-40 psi) , Male Type 1/4'' 

15 - 30 psi (1 psi = 0.07 bar) adjustable high-pressure switch for equipment with out pump. 

Code: 060029 

High Pressure Switch (20-40 psi) , Male Type 1/4'' Jaco 

19 June 2014 19/34

Code: 060030 

High Pressure Switch (20-40 psi) , Type 1/4'' quick fitting 

Shut-Off valves 

Code: 060031 

Shut-off valve 4 ways (6 screws) 1/4'' 

Code: 060032 

Shut-off valve white 1/4'' 

19 June 2014 20/34

Code: 060033 

Shut-Off Valve ( White ) with Quick Connector 1/4'' 

Variants 

Code 

Description 

060033-01 Shut-Off Valve ( White ) with Quick Connector 1/4'' (Last pieces) 

060033-02 Shut-Off Valve ( White ) with Quick Connector 1/4'' 

Flow Restrictors 

Code: 060034 

Flow Restrictor, Female 1/4'' 300cc, 400cc , 550cc , 600, 800cc 

Variants 

Code 

Description 

060034-01 Flow Restrictor, Female 1/4'' 300cc 





Code: 060035 

Flow Restrictor, Female 1/4", 300ml, 350ml, 400ml, 500ml 

19 June 2014 21/34

Variants 

Code 

Description 

060035-01 Flow Restrictor, Female 1/4" 300ml 




Code: 060036 

Flow Restrictor, Female quick fitting 1/4'' 800cc, 520cc, 420cc 

Variants 

Code 

Description 

060036-01 Flow Restrictor, Female quick fitting 1/4'' 420cc 



Code: 060037 

Flow Restrictor, Female quick fitting 1/4'' 300ml, 420ml, 550ml 

Variants 

Code 

Description 

060037-01 Flow Restrictor, Female quick fitting 1/4'' 300ml 



19 June 2014 22/34

Booster pumps 

Code: 060043 

Booster pump UP-7000/24VDC 220VAC/50Hz 

Features 

Size: 

173x102x103 (mm) 

Weight: 

2kg 

Voltage: 

24 / 36 / 48 VCD 

Rotation speed rate: 

550~600rpm 

Power Hertz: 

50 / 60 Hz 

Temperature Rating: 10 °C~45 °C 

Voltage Insulating Test: 

0.8 KV / 3 second (under 0.6 mA) 

Power consumption: 

24W 36W 48W 

Max. outlet pressure: 

120psi 

Working pressure: 

80psi 

Flow rate @ 80 psi: 

0.65 lpm / 1.24 lpm / 2.0 lpm 

Variants 

Code 

Description 

060043-01 Booster pump UP-7000/24VDC 220VAC/50Hz w/transformer 

060043-02 Booster pump UP-7000/24 AC24V without transformer 

060043-03 Transformer 220V/24VDC 1.2A internal connection to the UP-7000 

060043-04 Pump head for UP-7000 

* MOTOR: 24VDC 

* INPUT: 220VAC/50Hz 

* OUTPUT: DC24V/1.2A 

* FLOW RATE: 1,8LPM 

Code: 060044 

Booster pump UP-8000/24, 36, 48 VDC 220VAC/50Hz 

Features 

Size UP-8000: 

Size UP-8000W: 

Weight UP-8000: 

Weight UP-8000W: 

Voltage UP-8000: 

196x102x103 (mm) 

196x102x105 (mm) 

2,3kg 

2,3kg 

24 / 36 / 48 VCD 

19 June 2014 23/34

Voltage UP-8000W: 

24 / 36 / 48 VCD 

Rotation speed rate UP-8000: 1500rpm 50 rpm 

Rotation speed rate UP-8000W: 1800rpm 50 rpm 

Power Hertz UP-8000: 

50 / 60 Hz 

Power Hertz UP-8000W: 

50 / 60 Hz 

Operation Temperature UP-8000: 10 °C~45 °C 

Operation Temperature UP-8000W: 10 °C~45 °C 

Voltage Insulating Test UP-8000: 0.8 KV / 3 second (under 0.6 mA) 

Voltage Insulating Test UP-8000W: 0.8 KV / 3 second (under 0.6 mA) 

Power consumption UP-8000: 57W 77W 90W 

Power consumption UP-8000W: 57W 77W 90W 

Max. outlet pressure UP-8000: 120psi 

Max. outlet pressure UP-8000W: 120psi 

Working pressure UP-8000: 

80psi 

Working pressure UP-8000W: 80psi 

Flow rate @ 80 psi UP-8000: 1.9 lpm / 2.4 lpm / 3.1 lpm 

Flow rate @ 80 psi UP-8000W: 1.9 lpm / 2.4 lpm / 3.1 lpm 

Variants 

Code 

Description 

060044-03 Booster pump UP-8000/36VDC w/o transformer 

060044-06 Transformer 220V/36VDC 2A for code 060044-03 

060044-04 Booster pump UP-8000/24 DC24V w/o trasformer 

060044-08 Transformer 220V/24VDC 4A. for code 060044-04 

060044-05 Booster pump UP-8000W/24 DC36V 220VAC/50Hz with transformer cooling ring 

060044-09 Booster pump UP-8000/48VDC 220VAC/50Hz with transformer 

060044-10 Booster pump UP-8000/48VDC 220VAC/50Hz w/o transformer 

060044-11 Transformer 220V/48VDC 2A for code 060044-09/10 

060044-07 Pump head for UP-8000 

* MOTOR: 36VDC 

* INPUT: 220VAC/50Hz 

* OUTPUT: DC36V/2A 

* FLOW RATE: 3LPM 

Code: 060055 

Booster pump UP-8500W water cooling 220VAC/50-60Hz 

Features 

Size: 

170x119x110 (mm) 

Weight: 

2,3kg 

Voltage: 

220 VCD 

Rotation speed rate: 

2100rpm 50 rpm 

Power Hertz: 

50 / 60 Hz 

Temperature Rating: 10 °C~45 °C 

Voltage Insulating Test: 

0.8 KV / 3 second (under 0.6 mA) 

Power consumption: 

90W 

Max. outlet pressure: 

120psi 

Working pressure: 

80psi 

Flow rate @ 80 psi: 

3,9 lpm 

Variants 

Code 

Description 

060055-01 Booster pump UP-8500W water cooling 220VAC/50-60Hz with P.C.B control box 

19 June 2014 24/34

060055-02 Booster pump UP-8500W water cooling 220VAC/50-60Hz with-out P.C.B control box 

060055-03 Booster pump UP-8500W 220VAC/50-60Hz P.C.B control box 

060055-04 UP-8500W replacement pump head 

* Top quality brushless pump for commercial RO system ( 150 - 300 GPD) and quiet operation. 

* Longer lifespan and more durable performance. 

* One hundred thousand recyling test under 0 to 150 psi. 

* Self-priming ability : 3 meters. 

* Cooling ring patent design maintains a cool operating temperature of the pump, effectively extending the 

lifespan of the pump head. 

* P.C.B control box included. 

Code: 060066 

Booster pump PSP220 220V (8) 

Variants 

Code 

Description 

060066-01 PSP220 Booster pump 220V (8) 

060066-02 PSP220 replacement pump head 

220 volt PSP Booster Pump Without transformer. 28 cm. cable for terminal box connection. 

* Max pressure: 70psi 

* Specifications: 230VAC - 0,8AMP 

* Flow rate: 5,2lt./min. 

* Connections: 3/8" NPTF 

* Pump head: In grivory also suitable for carbonation/soda systems water. 

Vane pumps 

Code: 060041 

Fluid o Tech Brass vane pumps for revers osmosis 

200-300-400-600-800-1000 lt/h 

Variants 

Code 

Description 

060041-01 PA204 Fluid o Tech Brass vane pumps 200 lt/h with by-pass (12) 

060041-02 PA200 Fluid o Tech Brass vane pumps 200 lt/h with out by-pass (12) 

060041-03 PA304 Fluid o Tech Brass vane pumps with by-pass (12) 


19 June 2014 25/34







060041-11 PA1001 Fluid o Tech Brass vane pumps 1.000 lt/h with by-pass (6) 

060041-12 PA1000 Fluid o Tech Brass vane pumps 1.000 lt/h with out by-pass (6) 

The rotary vane pumps, manufactured by Fluid-o-Tech and sold worldwide under the trademark Rotoflow, 

are volumetric pumps designed for pumping water and moderate aggressive liquids with low flow at high 

pressure. 

Technical features and manufacturing characteristics 

The rotary vane pump is brass made with a stainless steel AISI 303 rotor, while the pumping chamber and 

the vanes are in carbon graphite. 

The inlet and outlet ports are 3/8" GAS or NPT threaded. 

The pumps are designed to be directly mounted to the motor with a stainless steel clamp. 

For different mounting arrangements see our technical info “optional mountings”. 

Maximum operative temperature: 70 °C (158 °F). 

Available upon request: 

- Viton®/EPDM seals (suffix - V/E) 

- built-in relief valve 

- built-in 70 mesh filter 

- flange mount 

Main applications 

- Beverage vending machines 

- Post-mix drink dispensers 

- Espresso coffee machines 

- Cooling systems 

- Reverse osmosis 

- Ultra-filtration 

- Water dispensers 

Code: 060042 

Fluid o Tech AISI 303 stainless steel vane pumps for reverse 

osmosis 300-400-600-800-1000 lt/h 

Variants 

Code 

Description 

060042-01 PA310 Fluid o Tech 303 stainless steel vane pumps 300 lt/h with out by-pass (12) 

060042-02 PA311 Fluid o Tech 303 stainless steel vane pumps 300 lt/h with by-pass (12) 

060042-03 PA410 Fluid o Tech 303 stainless steel vane pumps - 400 lt/h with out by-pass (12) 

060042-04 PA411 Fluid o Tech 303 stainless steel vane pumps - 400 lt/h con by-pass (12) 

060042-05 PA610 Fluid o Tech 303 stainless steel vane pumps - 600 lt/h senza by-pass (6) 

060042-06 PA810 Fluid o Tech 303 stainless steel vane pumps - 800 lt/h with out by-pass (6) 

060042-07 PA1010 Fluid o Tech 303 stainless steel vane pumps - 1.000 lt/h with out by-pass (6) 

The rotary vane pumps, manufactured by Fluid-o-Tech and sold worldwide under the trademark Rotoflow, 

19 June 2014 26/34

are volumetric pumps designed for pumping water and aggressive liquids with low flow at high pressure. 

Technical features and manufacturing characteristics 

The housing and the rotor are in stainless steel AISI 303, while the pumping chamber and the vanes are in 

graphitic carbon. 

Inlet and outlet ports are 3/8" GAS or NPT threaded. 

A built-in adjustable bypass to protect the pump and the system from unexpected pressure spikes is also 

available upon request. 

The pump can be connected to direct coupling motors with a stainless steel clamp or to M71 and M80 

UNELMEC or NEMA 56C frame motors with the Fluid-o-Tech coupling and adapter set. 

Maximum operative temperature: 70 °C (158 °F). 

Available upon request: 

* Viton®/EPDM seals (suffix - V/E) 

Main applications 

* Soda circulation in post-mix drink dispensers 

* Cooling systems 

* Reverse osmosis 

* Ultra-filtration 

* Booster systems 

Engines vane pumps 

Code: 060059 

Engine water cooled rotary pump for reverse osmosis 180W. 

Code: 060060 

Engine air cooled rotary pump for reverse osmosis 180W. 

19 June 2014 27/34

Accumulator tanks 

Code: 060045 

Pressurised accumulator tanks in steel painted white 1,8 Gal.- 

6,8 lt. (1) 

Inner membrane: butyl 

Inner covering: Polypropylene liner 

Max. work pressure 7 kg/cm2. 

Preloading pressure 0.5 kg/cm2. 

Diameter: 210mm. 

Height: 340mm. 

Code: 060061 

Pressurised accumulator tanks in steel painted blue 2,1 Gal.- 8 

lt. (1) 

Inner membrane: butyl * Inner covering: Polypropylene liner * Max. work pressure 7 kg/cm2. * Preloading 

pressure 0.5 kg/cm2. * Diameter: 202mm. * Height: 260mm. * Connection 1/4" 

Code: 060047 


8,3 lt. (1) 



19 June 2014 28/34





Code: 060063 

Pressurised accumulator tanks in steel plastic covering 3 Gal.- 

11,3 lt. (1) 

Code: 060046 

Pressurised accumulator tanks in steel and stainless steel 3,2 

Gal.- 12,1 lt. (1) 

Variants 

Code 

Description 

060046-S Pressurised accumulator tanks in steel 3,2 Gal.- 12,1 lt. (1) 

060046-SS Pressurised accumulator tanks in stainless steel 3,2 Gal.- 12,1 lt. (1) 





Material: Steel 



19 June 2014 29/34

Code: 060062 


12,1 lt. (1) 





Material: Steel 



Code: 060048 

Pressurised accumulator tanks in steel plastic covering 5,5 

Gal.- 21 lt. (1) 







Code: 060050 

Pressurised accumulator tanks in steel painted blue 10,7 Gal.- 

40,6 lt., 14,4 Gal. - 54,5 lt. (1) 

19 June 2014 30/34

Variants 

Code 

Description 

060050-01 Pressurised accumulator tanks in steel painted blue 10,7 Gal.- 40,6 lt. (1) 

060050-02 Pressurised accumulator tanks in steel painted blue 14,4 Gal. - 54,5 lt. (1) 

060050-01 10,7 Gal.- 40,6 lt * Diameter: 390mm. * Height: 500mm. * Connection: 1/4"-3/4"F. 060050-02 

14,4 Gal. - 54,5 lt. * Diameter: 390mm. * Height: 580mm. * Connection: 1/4"-1"F. 

Code: 060051 

Accumulator tanks in steel 20 Gal.- 76 lt. 



Code: 060052 

1/4” F – 1/4” M plastic square 

Control unit 

Code: 060056 

Osmocount V1.0 counting system with block water for reverse 

osmosis and water coolers. 

19 June 2014 31/34

Variants 

Code 

Description 

060056-01 Osmocount V1.0 counting system open board 

Plugs switches cables 

Code: 060068 

IEC tripolar built-in plug switch with fuse 

Panel hole size (LxH): 47x28mm. 

Code: 060069 

IEC tripolar built-in plug bright switch with fuse 

Panel hole size (LxH): 47x28mm. 

Code: 060070 

IEC power supply cable - schuko EU plug 

Variants 

Code 

Description 

060070-01 IEC power supply cable - schuko EU plug White 

060070-02 IEC power supply cable - schuko EU plug Black 

19 June 2014 32/34

Cable: 2mt. (3x0,75mm.) 

Miscellaneous 

Code: 060040 

Glycerin manometer for board installation 1/8" (Ø 5cm) 

Pressure: 0 - 10 bar 

19 June 2014 33/34

Powered by TCPDF (www.tcpdf.org)

Sinergroup Reverse osmosis - spare parts solenoid valves sensors Catalog

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?