Panic exit device - Hafele

Locking and Security 

Information 

Emergency exit device EN 179 

2 

The standard cover devices to be used in 

emergency situations if people are familiar with 

the emergency exit and whose hardware. In this 

situation a panic is most unlikely to develop. Lever 

handle operated escape mortise locks or push 

pads may used therefore. 

Panic exit device EN 1125 

The standard cover devices to be used in panic 

situations if people are not familiar with the 

emergency exit and whose hardware but must be 

able to open the hardware intuitive. An horizontal 

operated touch bar is here required. 

We reserve the right to alter specifications without notice. 

AH 2.46 

New products and systems: www.hafele.com


Panic Exit Device 

PED 100 Panic exit device 

• Area of application: 

• Material: 

• Colour: 

• Finish: 

• Version: 

• Standard: 

• For door width: 

• Door weight: 

• Backset A: 

• Distance B: 

• Lever follower: 

For fire resistant doors 

Touchbar mechanism: Steel 

Touchbar mechanism: Black 

Touchbar mechanism: Powder coated 

With cylinder aperture 

EN 1125 in conjunction with approved accessories 



PED 200 Panic exit device 

With key action 

2 


• Material: 

• Colour: 

• Finish: 

• Version: 

• Standard: 

• For door width: 

• Door weight: 

• Lever follower: 

For fire resistant doors 

Touchbar mechanism: Steel 

Cover: Black 

Touchbar mechanism: Powder coated 

Basic module 

EN 1125 in conjunction with approved accessories 



PED 200 and PED 210 Accessories 

In compliance with EN 1125 

Lever handle 

For outer side 

69 

54 

• Area of application: Suitable for PED 200 and PED 210 

• Colour: 

Black 

2 

136 

Cat. No. 

Lever handle 911.52.126 

42 

36 

118 

Order reference 

Spindle supplied. 

Knob 

For outer side 

45 


• Colour: 

Black 

54 

136 

Cat. No. 

Knob 911.52.127 

42 

36 

Order reference 

Spindle supplied. 

Dogging device 


Retrofitting the "permanent open function" 

on panic doors, suitable for PED 200 and PED 210 

Cat. No. 

Dogging device 909.09.907 

Micro switch 



Acoustic alarm generator activates an alarm 

when panic doors are operated, 

suitable for PED 200 and PED 210 

Cat. No. 

Micro switch 909.09.908 

New products and systems: www.hafele.com 

AH 2.49



Intumescent seal 

For fire resistant and smoke control doors 


• Material: 

Fire resistant and smoke control doors 

Graphite 

2 

Cat. No. 

Seal 901.02.393 

Top keep 

For aluminium doors 


For top shoot bolt, 

on aluminium doors 

Cat. No. 

Keep 911.52.116 

Top keep 

For plastic doors 


For top shoot bolt, 

on plastic doors 

Cat. No. 

Keep 911.52.117 


AH 2.50 




Mounting sets overview 

For glass door installation 

For the installation on glass doors, mounting sets are available to suit the modular panic exit devices. 

Mounting options 

2 

Necessary glass 

preparation 

A 

For mounting blank 

escutcheons on glass doors 

3.1, 

4 

1.1, 

2, 

3.1, 3.2, 

4 

1.1, 

2, 

3.1, 

4 

1.1,1.2, 

2, 

3.1, 

4 

1.1,1.2, 

2, 

3.1, 3.2, 

4 

1.1, 

2, 

3.1, 3.2, 

4 

1.1, 1.2, 

2, 

3.1, 3.2, 

4 

X X X X X XX XX 

B 

For glass door installation, 

DIN left 


C 

For glass door installation, 

DIN right 


D 

For mounting shoot bolts on 

glass doors 

O O O O O 

E 

For glass installation, 

central lock 

O 

O 

O 

O 

F 

For glass installation, 

top lock 

O 

O 

O 

G 

For shoot bolt 

O O O O O 

X = One set from A, B or C is required. 

XX = Two sets from A, B or C are required. 

O = One set each is required. 

Glass preparation details 



AH 2.51



Mounting set A 

For mounting blank escutcheons on glass doors 

2 

145 

119 13 

q9 


• Material: 

• Colour: 

• Finish: 

• Version: 

For installation on glass doors 

Aluminium 

Stainless steel coloured 

PVD 

Modular system 

Cat. No. 

Mounting set A 909.09.900 

8 

17 

9 

37 

Mounting set B 

For glass door installation, DIN left 

170 

119 36 

q9 

145 

119 13 

q9 


• Material: 

• Colour: 

• Finish: 

• Version: 


Aluminium 


PVD 


Cat. No. 

8 

9 

5 

8 

17 

9 

37 

Mounting set B 909.09.901 

17 

46 

Mounting set 

For glass door installation, DIN right 

145 

119 13 

q9 

170 

119 36 

q 9 


• Material: 

• Colour: 

• Finish: 

• Version: 


Aluminium 


PVD 


Cat. No. 

8 

17 

9 

37 

8 

9 

5 

Mounting set C 909.09.902 

17 

46 

Mounting set D 

For mounting shoot bolts on glass doors 

10 

80 

48 

8 

17 

q 9 

9 

29 

• Area of application: For installation on glass doors 

• Material: 

Aluminium 

• Colour: 


• Finish: 

PVD 

• Version: 


Cat. No. 

Mounting set D 909.09.903 


AH 2.52 




Mounting set E 

For glass installation, central lock 


• Material: 

• Colour: 

• Finish: 

• Version: 


Aluminium 


PVD 


10 

q9 

10 

2 

50 

30 

50 

30 

8 9 

28 

7 

17 

41 

13 

35 

49 

Cat. No. 

Mounting set E 909.09.904 

Mounting set F 

For glass installation, top lock 

33.5 

27 

13 

9 

28 17 

11 


• Material: 

• Colour: 

• Finish: 

• Version: 


Aluminium 


PVD 


Cat. No. 

Mounting set F 909.09.905 

Mounting set G 

For shoot bolt 


• Material: 

• Version: 


Stainless steel 


Cat. No. 

Mounting set G 909.09.906 

Accessories for glass installation PED 200 and PED 210 

Lever handle 

For outer side of glass doors 



on glass doors 

• Colour: 

Black 

Cat. No. 

Lever handle 911.52.122 


AH 2.53



Panic exit device 

2 

Features 

• For rebated or flush doors 

• For 1-leaf and 2-leaf doors 

• For timber or steel doors 

• Suitable for application in escape and rescue routes 

• Suitable for DIN left and right hand 

• Certified according to EN 1125, Classification 3-7-5-1-1-3-2-2-A 

• The length of the touchbar must be at least 60 % of the 

effective door opening 

• Suitable for door leaf width (a) up to 1500 mm 

• Suitable for door leaf height (b) up to 2650 mm 

Function 

• Locking function: 

Lever handle (basic unit 2) can be locked by single 

profile cylinder (basic unit 3): access not possible from the outside 

• Opening of the door from the inside by pushing the touchbar 

• Opening the door from the outside optionally possible by lever 

handle or by lever handle and single profile cylinder 

Note 

• Basic unit 1 does not work with basic unit 3 alone: 

Single profile cylinders 

• Basic unit 1 works with 

- Basic unit 2: Lever handle only 

- Basic unit 2: Lever handle + 

- Basic unit 3: Single profile cylinder 

A - Basic unit 1: Panic lock 

B - Basic unit 2: Lever handle 

C - Basic unit 3: Single profile cylinder 

D - Basic unit 4: Latch parts and vertical 

rod type touchbar 

max. door leaf width a 

Installation in rebated doors 

Installation in flush doors 

max. door leaf height b 


AH 2.54 




Locking version for single leaf doors 

Locking version 1 

Basic unit 1 

Inside 

Outside – 

Basic unit 1 + touchbar (order separately) 

2 


Basic unit 1+2 

Inside 

Outside Basic unit 2 



Basic unit 1+2+3 

Inside 



Basic unit 3 + cylinder rosette (order separately) 


Inside 


Basic unit 4 

Outside – 



Basic unit 1+2+3+4 


Inside 


Basic unit 4 


Basic unit 3 + cylinder rosette (order separately) 


AH 2.55



Locking version for double leaf doors 


Inactive leaf 

Active leaf 

2 

Inside Basic unit 1 + 

touchbar (order separately) 

Basic unit 1 + 


Basic unit 4 – 

Inactive leaf 


Active leaf 

Basic unit 1 

Outside – – 


Inactive leaf 

Active leaf 






Outside – Basic unit 2 

Inactive leaf 


Active leaf 



Inactive leaf 


Active leaf 

Basic unit 1 

Inactive leaf 


touchbar (order separately 


Active leaf 

Outside – Basic unit 2 



– Basic unit 3 + 

cylinder rosette 

(order separately) 


AH 2.56 




Base unit 1: Panic lock 

5 

Features 





• Prepared for single profile cylinder 

• Certified according to EN 1125:97 

Technical data 

• Lever follower: - 8 mm 

• Distance (b): 50 mm 

Supplied with 

2 Striking plates 

1 Set of fixing material 

1 Set of installation instructions 

2 

Housing 

Internal housing 

Latch 

Lever follower 

Steel grey lacquered 

Steel yellow chromatized 


Zinc alloy 

Cat. No. 911.52.272 


Switching DIN left/right hand and locking the latch 


AH 2.57



Touchbar 

Features 

• Suitable for basic unit 1: Panic lock 


Diameter: 25 mm 

2 

Finish 1000 mm 1200 mm 1500 mm 

Stainless steel matt 911.52.279 911.52.280 911.52.281 

Basic unit 2: Lever handle 

Features 

• Lever handle aperture part with rosette and square spindle 


Square spindle: - 8 mm 

Supplied with 

Fixing material 

Lever handle aperture part 

Rosette 

Zinc alloy grey lacquered 

Plastic grey 

Square spindle 

Zinc yellow chromatized 

Cat. No. 911.52.287 


AH 2.58 




Basic unit 3: Single profile cylinder 

Features 


• Only in connection with basic unit 2: Lever handle insertable 

• With 5 pin tumblers 

• Follower adjustable to 8 positions 

• Single profile cylinder: Brass nickel plated matt, 

glass bead blasted 

Fixing 

Length A results from: 

Door leaf thickness + 11 mm + cylinder rosette 

Supplied with 

1 Single profile cylinder 

3 Nickel plated steel keys 

1 Fixing screw 

2 

Length A Length B Length C Cat. No. 

Length A = external length of cylinder 

27.5 mm 10 mm 37.5 mm 916.00.601 

31.5 mm 41.5 mm 916.00.602 

35.5 mm 45.5 mm 916.00.603 

40.5 mm 50.5 mm 916.00.604 

55.5 mm 65.5 mm 916.00.605 

60.5 mm 70.5 mm 916.00.606 

65.5 mm 75.5 mm 916.00.607 

Cylinder rosette 

Features 

• Suitable for basic unit 3: Single profile cylinder 

Supplied with 

Fixing material 

Finish 

Cat. No. 

Plastic grey 911.52.292 



AH 2.59



Basic unit 4: Latch parts and vertical rod type touchbar 

2 

Features 






• Suitable for door leaf height up to 2,650 mm 

Supplied with 

2 Latch parts and covers 

2 Vertical rod type touchbars top and bottom 

3 Bar guides 

2 Striking plates 

1 Set of fixing material 

1 Set of installation instructions 

Finish 

Covers 

Latch parts 

Latch 

Vertical rod type touchbars 

Bar guides 


Steel yellow chromatized 



Plastic grey 

Cat. No. 911.52.302 


AH 2.60 




Panic exit device 

Area of application: For rebated or flush, single or double wooden or 

steel doors 

Suitable for: Fire resistant and smoke control doors 

Door width: 840 – 914 mm 

Door thickness: 43.9 – 50.8 mm 

Mounting: For DIN left and DIN right hand use 

UL listed for ANSI A 1563 

Function 

Opening of door from inside: By pushing the touchbar 

Opening of door from outside (optional): By activating the lever 

handle. Key locks or unlocks lever handles (ANSI cipher bit function) 

2 

Product components for single doors 

Product components for double doors 

Inside: 

- 1 Touchbar A 

Outside: 

- 1 Lever handles with round rosette E 

Inside: 

- Action leaf: 1 Touchbar A 

- Inactive leaf: 1 Touchbar with vertical locking rod B 

and 1 striking plate C 

Outside: 

- 1 Lever handle on backplate D or 


Inside: 

- 1 Touchbar with vertical locking rod B 

Outside: 

- 1 Lever handle on backplate D 


Inside: 

- Action and inactive leaf: Touchbar with vertical locking rod B each 

Outside: 



AH 2.61



A Touchbar 

Supplied with 

1 Touchbar 

1 Striking plate 

2 

Cat. No. 

Packing: 1 pc. 

911.56.036 

B Touchbar with vertical locking rod 

Cat. No. 


911.56.037 


AH 2.62 




C Striking plate 

Area of application 

For double doors inside: Active leaf with touchbar A, 

inactive leaf with touchbar with vertical locking rod B 

2 

Cat. No. 

Striking plate 911.56.024 


E Lever handle with round rosette 

Cat. No. 

Lever handle with round rosette 911.56.038 


D Lever handle on backplate and cylinder 

Cat. No. 

Lever handle with round rosette 911.56.028 




AH 2.63

Panic exit device - Hafele

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?