Download PDF Catalogue - Carba-Tec

carbatec.com.au

Download PDF Catalogue - Carba-Tec

Father’s Day


Carba-Tec ® Management Team

To Our Valued Customers

Welcome to the August edition of

the Carba-Tec ® catalogue. Winter is

well and truly with us and we are all

spending a lot more time indoors. What

a great time of year to settle into the

workshop with a good project.

Woodworking is often a solitary

pastime, but it can also bring people

together in the form of woodworking

clubs and online forums. Carol Russell

recently visited one of the Men’s Sheds

in Brisbane and saw first hand what a

great idea they are and how they are

offering men a place where they can be

with other like-minded people. In this

catalogue edition she writes about the

philosophy behind the organisation.

Woodworking clubs exist all over

Australia and New Zealand. We would

like to make it easier for people to find

the clubs in their region, Carba-Tec ® is

compiling a list to post on our website.

If you are a member of a woodworking

club and would like to be included,

Send your details to:

clubs@carbatec.com.au.

It would be good if you could include

a brief synopsis of the club and any

special areas of interest.

Our Brisbane store has begun

holding a series of masterclasses

in handskills. The classes include

topics such as sharpening, polishing,

hand dovetailing, carving and wood

sculpture. We have been fortunate

to have on board some of our finest

craftspeople and we are very grateful

for their involvement. For information

on the upcoming classes go to:

www.carbatec.com/classes. We hope

that in the future our other stores will

also be able to offer these events.

Father’s Day is coming up on

September 2nd and we have included

some great specials to celebrate. You’ll

find these in the rear section of the

catalogue along with some great new

products. There’s time to drop loads of

hints and compile your wishlist for your

family members. If you’re not sure what

you want, there’s always a gift card.

Have a great Father’s Day.

We hope you enjoy the catalogue,

The Carba-Tec ® Team

A beautiful, comfortable deck is within your reach! Get the deck you want

today, completely free of exposed nails and awkward fasteners, so you

can enjoy it tomorrow!

Product Code:

KR-KJDECKSYS

®

Deck Jig

For more information go to our website at

www.carbatec.com.au

Front Cover: Peter Geddes in his workshop.

Photo: Donovan Knowles


Table of Contents

Woodwork Machinery 8

Bandsaws..........................................12, 13

Cabinet Saws...................................8, 9, 10

CNC Machines..........................................19

Drill Press.................................................25

Jointers........................................14, 15, 18

Mortisers..................................................24

Panel Saws.................................................9

Router Tables......................................22, 23

Scroll Saws........................................10, 11

Sanders..............................................20, 21

Spindle Shaper/Moulder............................23

Thicknessers................................16, 17, 18

Table Saws.................................8, 9, 10, 85

Machinery Accessories 26

Adhesive Measuring Tape.........................34

Alignment System.....................................32

Bandsaw Accessories......................... 29-32

Belt/ Disc Cleaner.....................................36

Conveyors/Roller Stands.....................27, 28

Drill Press Support/Tables.........................33

Featherboards...............................28, 29, 30

Insert Plates (Router)................................31

Knobs, Handles, Screws, Nuts............ 34-36

Magswitch................................................29

Mitre Bars/Tracks..........................30, 33, 34

Mitre Gauges......................................30, 32

Mortising Attachment...............................33

Powerfeeds..............................................32

Sanding & Accessories.......................36, 37

Silverglide.................................................26

Stands/Mobile Bases/Casters........26, 27, 28

Tablesaw Accessories..................26, 30, 32

T-Slots/Clamp Tracks/Jig Making........ 33-36

Toggle Clamps..........................................36

Woodturning 38

Lathes ...............................................38, 39

Live Centres & Drive Dogs............40, 42, 43

Scrollchucks & Jaws..........................40, 41

Teknatool Accessories........................40, 41

Turning Tools/Chisels.......................... 44-45

Dust Extraction 46

Dust Extractors................................... 46-48

Dust Extraction Accessories................ 47-50

Room Air Filters........................................46

Safety & Workshop Accessories 51

Aprons.....................................................53

Bench Cookies TM .......................................53

Braces & Belts..........................................54

Dust Masks/Respirators............................51

Face Shields.............................................51

Lighting....................................................52

Magnifiers................................................52

Push Sticks & Blocks....................26, 28, 30

Shelving/Storage Racking.........................54

Tool Rolls & Pouches................................53

Utility Boxes/Containers............................54

Metalworking 55

Guillotine/Benders.....................................57

Metal Tools & Accessories.................. 57-60

Metal Lathes.............................................56

Milling Machines.......................................55

Tap & Die Sets..........................................58

Marking & Measuring 61

Angle Finder.............................................66

Bar Gauge Heads......................................61

Beam Compass Heads.......................61, 62

Bevel Setter/ Sliding Bevel.........................62

Depth Gauge.............................................62

Digital Measuring & Calipers.....................66

Dovetail & Saddle Squares..................63, 64

Height Gauges..............................64, 65, 66

Marking Tools...................61, 62, 63, 65, 66

Rules................................62, 63, 64, 65, 66

Squares............................62, 63, 64, 65, 66

Straightedges...........................................66

Handtools & Handplanes 67

Adze/Axe/Hatchet.....................................68

Beading Tools...........................................71

Burnishers................................................75

Camellia Oil..............................................71

Chisels...............................................67, 68

Hammers/Mallets.....................................68

Handplanes..................................72, 73, 74

Handsaws..........................................69, 70

Kitchen Knives..........................................68

Moisture Meters.......................................70

Scrapers/Spokeshaves.............................75

Tri-Burnisher.............................................75

Sharpening 76

Diamond Files...........................................77

Grinders & Accessories......................79, 80

Honing Guides/Compound........................76

Lapping Plates/Kits...................................77

Sharpening Jigs........................................76

Slipstones & Strops..................................80

Tormek.....................................................79

Waterstones.............................................77

Whetstones/DMT ® ..............................77, 78

Clamping, Vises & Benches 81

Band/Framers Clamps..............................84

Clamps-Sash/TBar/Pipe............................82

Hold-downs/ Bench Dogs.........................81

ProGrip TM ..................................................84

Vises..................................81, 83, 115, 116

Workbenches...........................................81

Power & Pneumatic Tools 85

Bosch Power Tools...................................85

Edgebander & Trimmer.............................87

Festool Power Tools............................ 86-87

Hinge Mortise Jig.....................................87

Lock Mortiser...........................................87

Triton Tools/Accessories..................... 88-89

Routing & Accessories 90

Base Plate Adaptor ..................................94

Inlay Kit/Guide bushes..............................95

Router Bits (Carba-Tec ® ) ..........................95

Router Bits (CMT TM )............................ 90-93

Saw Blades..............................................94

Drilling & Boring 96

Angle Chuck...........................................100

Auger Gimlets...........................................97

Circle Cutters..........................................100

Countersinks ...................................99, 100

Drill Chuck Attachments....................97, 100

Drill Sets.............................................96, 97

Drill Stops.................................................96

Forstner Style Bits...............................97, 98

Holesaw Kit............................................129

Plug Cutters .....................................99, 100

Saw Tooth Bits ........................................98

Spade Bit Set............................................97

Toy Wheel Cutters...................................100

Dovetail Jigs & Joinery 101

Beadlock Joinery....................................105

Dowelling & Biscuits...............................104

Framing Tools/Accessories ....................105

Kreg Jigs & Accessories ................106, 107

Kreg Screws, Plugs, Drivers ...................107

Leigh/Dovetail Jigs/Accessories...... 102-104

Mitre Saws/Trimmers..............................105

Mortise & Tenon Jigs..............................101

Adhesives & Finishing 108

Glue...............................................109, 110

Gluing Accessories.................108, 109, 110

HVLP Spray Guns...................................108

Silverglide.................................................26

Wax/Oil/Shellac.......................108, 109, 110

Woodcarving 111

Carving Chisels & Sets................... 111-115

Drawshaves/Drawknives.................111, 115

Knives....................................111, 112, 115

Palm Sets (Pfeil, Flexcut)................112, 115

Powered Carving Tools...........................116

Rasps/Rifflers.........................................116

Scorp.............................................111, 115

Violin Gouges.........................................111

Vises/Carving.................................115, 116

Pens, Clocks & Craft 117

Brassware..............................................122

Clocks & Weather Instruments.........120,121

Craft Accessories...........................117, 122

Pen Blanks.............................................118

Pen Parts...............................................119

Pen Rolls/Boxes......................................119

Pyrography.............................................117

Rare Earth Magnets................................117

Salt & Pepper Mechanisms.....................117

Signmakers Templates............................121

Please see website for all terms and conditions of sale. Website pricing supercedes all printed pricing and advertising.


WHY

use handplanes

in A modern

WORLD?

It’s very interesting to look at the place

the handplane occupies in the history

of woodworking. One of the most

important changes that occurred in this

history was the progression from the

carpenter - whose main tools were the

axe, adze and saw - to the joiner, cabinet

maker and other craftsmen, all of whom

needed components produced to precise

dimensions and a smooth finish. It was

the handplane alone that made this

development possible.

Prior to the machine era this important

preparatory work was done by hand

with bench planes. The introduction of

machinery and power tools dramatically

reduced both the labour component and

the time requirement. These benefits

are unquestionably essential in today’s

commercial workshops, so it is therefore

inevitable that the bench plane would

become far less important. Despite this,

the simple truth remains that a plane

works better and more efficiently than a

machine in many situations.

For example, no machine with rotating

blades can match the clarity and polish

produced on a surface cut with a well

tuned and sharp handplane. Surface

ripples left by some thicknessing

machines are best removed with a bench

plane. When fitting a joint such as a

mortise and tenon, no tool is more useful

than a shoulder plane. The difference

between a well fitted drawer and a loose

one is often a little more than a thin plane

shaving. A plane allows you to do this,

one shaving at a time. What machine

can do that? Similarly, the fitting of a door

and cabinet is most easily and accurately

done with a bench plane. Cleaning up

after having glued up a joint with dovetails

or finger joints is quickly and neatly done

with a block or bench plane.

There are numerous other situations

in which a handplane is the most

appropriate tool. Possibly the most

important reason for learning to use one

is that the skills you acquire can transform

the standard of your craftsmanship. It is

not a difficult tool to use, like swimming or

riding a bike, it’s never forgotten. Many of

the older generation of craftsmen - those

who spent their early years working only

with hand tools - find these skills of great

benefit when using machinery.

Frank Klaus, the highly regarded

European craftsman, now based in

America, states that once mastered, the

handplane becomes the most important

tool in your workshop. James Krenov,

regarded by many as the most influential

craftsman in fine woodworking in the last

30 years, likens the plane to the violin

in an orchestra, the instrument that sets

the tone of a piece. If that’s not enough,

planes, properly used, can make your

woodworking more enjoyable. Certainly,

your workshop becomes a quieter and

cleaner place.

In short, there is no substitute for a well

sharpened and finely tuned handplane.

Peter Geddes is a Brisbane-based

woodworker. He teaches classes in

handplane usage entitled ‘Making Friends

With Your Handplane ‘ at Carba- Tec ®

in Brisbane.

Want some tips on how

to improve your

handplaning technique?

Go to the Develop and Discover section of our website:

www.carbatec.com.au

To read Peter’s woodworking profile go to

www.carbatec.com.au/peter-geddes


Diamond

Sharpening

An important step to the success of any

woodworking project is to begin with sharp

tools. DMT ® Diamond Sharpeners are well

known to woodworkers for their remarkable

sharpening speed, precision flatness

and ease of use. Some of the factors that

contribute to the sharpening efficiency of

DMT ® products are:

1. Precisely sized micron Monocrystalline

diamond. The single crystal super abrasive

provides durability and toughness. It

is most effective on the new harder tool

steels.

2. The unique interrupted surface of

recessed polka dots collects and removes

the metal fines from the tool edge during

the sharpening process. This feature keeps

the DMT diamond-sharpening surface

performing, making your sharpening task

that much faster.

3. The flatness of the substrate matches

the flatness of ground steel plates - a

precision standard not attained by other

manufacturers or sharpeners.

DMT ® make a wide range of bench stones

for sharpening woodworking chisels and

plane irons. The Dia Flat Lapping Plate is

designed to re-establish a perfectly flat

surface on your waterstones or Arkansas

stones.

There are the DuoSharp stones that are

double-sided, featuring a different grit on

each side for two stage sharpening, a

highly economical way to purchase

two stones.

For sharpening gouges or other shaped

chisels there are honing cones or the

unusually designed Wave Sharpener.

This comes in 600 or 1200 grit and has

both convex and concave profiles that

taper from a radius of 1.59mm to 25mm,

to accommodate a wide range of curved

tools. When sharpening small or pointed

tools, DMT ® have created Dia-Sharp, these

stones have a continuous diamond surfaces

to avoid the fine corners of the tool

snagging or catching on the corners.

The easy colour coding system guides

you through the different grades of

stone: Black-Extra-coarse, Blue-

Course, Red-Fine, Green-Extra

Fine.

Make your job or hobby

easier, safer and quicker

by keeping your tools

sharp. There is a DMT ®

product for just about

every sharpening need.

To view our range of DMT ®

products go to

www.carbatec.com.au

The DMT ® Advantage

Speed – They work in a fraction of the

time required by other methods, only light

pressure is needed, let the diamonds do

the work.

Ease of use - Just a few easy strokes

on your own or with a guided sharpening

systems!

Cleanliness – No messy oils or clean

up, use only water if needed.

Durability - Longest lasting and highest

quality sharpening on the market! Will not

hollow or groove over the life of the

product.

Versatility – Widest range of product

available on the market, from Extra-Extra

Coarse 120 micron grit to Extra-Extra Fine

3 micron grit. From small portable, folding

products, to large stationary bench

stones, to kitchen steels and diamond

pastes.


The

Men’s

Shed

The ‘Men’s Shed’ is an initiative to improve the health of men by

giving them a place in their communities where they can find companionship

and purpose. The sheds are making a difference to

thousands of men from all over Australia and New Zealand. Carol

Russell visited one of the sheds and spoke to some of the participants.

I was reminded of the appeal of a good shed recently when visiting

my brother on a freezing cold day in Tasmania. After lunch,

we left the warm and cosy little house in the foothills of the Western

Tiers, preferring the atmosphere in the old shearers shed that

Kerry has converted to a workshop. We sat around a big wood

stove with a drink and chatted about tools and project plans and

the meaning of life. The smell of lanolin hung in the air, reminding

me of the shed’s former use. It was a great day.

My brother’s shed is an unattainable dream to many people. As

cities grow and housing blocks decrease in size, more of us live in

units or move into tidy manicured suburbs and retirement homes.

There just isn’t the space to make a mess, gather with some

friends and let our imaginations roam free.

The Men’s Sheds were formed to address a growing concern over

the lack of attention given to men’s health issues, particularly anxiety

and depression which can be triggered by the isolation that

retirement or family breakdown can create. It’s recognised that

men are less likely to confide in others and seek help with their

problems than women.

The mantra of the peak body for the Men’s Sheds - The Australian

Men’s Shed Association ( AMSA ) is ‘health by stealth’. When you

visit a shed the health aspect isn’t ‘in your face’. People go to the

sheds for different reasons and are free to engage on whatever

level they want with the other ‘sheddies’. It’s really just a group

of men getting together in a relaxed atmosphere to make or fix

things, swap ideas and maybe share a cup of coffee and a chat.

Anyone considering joining a shed needn’t be concerned that

they will be forced into revealing more about themselves than they

are comfortable with.

During my visit to the Carina Men’s Shed situated in Brisbane, Mal

Weier, the shed’s president explains that each one of the almost

800 sheds throughout the country is different. The skills of the

membership, its location and the facilities available at each Men’s

Shed shape its style and the activities that are on offer. These can

include just about anything. Some examples of the more common

activities are: wood and metalwork, photography, computing, furniture

restoration, car mechanics and even cooking, nutrition and

fitness.

The sheds rely on the support of the local councils, communities

and businesses to help with resources and finding a suitable location.

If they register with the peak body, Australian Men’s Shed

Association (AMSA ) there is an enormous support network to call

on. They offer help with the practical aspects of starting up and

managing a shed such as insurance, risk management, funding

and accessing resources.

The AMSA have a comprehensive website that can be used to locate

sheds and an online forum entitled ‘The Shed Online’. This is

a virtual Men’s Shed that contains a discussion forum where men


can talk to each other online and share ideas on practical things

like gardening or woodwork. There are also blogs and articles on

heath issues such as depression, diabetes and cancer.

Shed members come from all walks of life. During my visit to the

Carina Men’s Shed, I met Charlie, a retired cheesemaker, Robert,

a retired engineer, Ken a journalist and author and Herman a retired

dogman/rigger, as well as retired teachers and public servants.

On the day of my visit the members from the local Wynnum-

Manly Men’s Shed were visiting. The mood was jovial and friendly

as the visitors checked out the facilities and swapped stories and

compared notes with their fellow sheddies.

Mal explains that at Carina there are currently 34 members, the

youngest is 36 and the oldest is 86. He is hoping to foster a mentoring

program in the future to harness the enormous wealth of

knowledge amongst the members and hand it on to younger men.

Like sheds everywhere, the men at Carina have done a lot of work

for local schools and community groups, including making a ramp

for the ‘Meals On Wheels’ ladies who had battled with lifting their

trolly over a large step for over 30 years. After Cyclone Yasi hit Tully,

the men embarked on a project to make dozens of possum boxes

to house the displaced marsupials. The trees had been stripped of

their foliage and without the boxes, the possums would have died.

This project was done with the help of Bunnings.

Although the AMSA website states that women are welcome at the

sheds, the feeling seems to be that women have access to many

other forms of socialising and are more likely to be able to speak

to each other about issues surrounding health and their personal

and family welfare. I felt very warmly welcomed though and was

touched by the men’s willingness to speak to me about their reasons

for seeking out the Mens Sheds.

There was a common theme, Many of them had found that after

retirement they felt lost and at a loose end, missing the social contact

and relevance their work had provided for them. Some had

lost their wives or partners to illness or had suffered illness themselves.

Thy felt reinvigorated to be a part of something and share

their interests with others.

The Men’s Shed has become a practical lifeline to many. In receiving

and giving support to other people, the sheds are helping to

regain the key meaning of what it is to be a part of a community

where people look out for each other.

To check out the Carina Men’s Shed Website go to

www.mensshedcarina.com.au.

If you feel there is something at the Men’s Shed for you or if you

have materials or equipment you would like to donate, go to the

AMSA website: www.mensshed.org to find your nearest shed

location or call them on 1300 550 009.

Bench Chisels

Veritas ® have added a selection of bench

chisels to their range of premium tools. The

blades are turned and milled out of solid bar

stock made from 01 grade steel, renowned

for its ease of sharpening and superb edgeretention

properties.

Each blade is guaranteed to be lapped to

a flatness tolerance of within 0.0005” ( half

of one-thousandth of an inch) over the entire

surface. So other than a fine hone, the

Veritas ® bench chisels are ready to use out

of the box.

The chisels have a taper from shoulder to tip

for strength and rigidity, with parallel sides

and bevelled edges for clearance when

working in tight recesses.

The handles are kiln-baked Maple. The Maple

is baked at a high temperature to eliminate

all the moisture and caramelise the

natural sugars in the wood. This increases

the density making it exceptionally hard and

able to withstand constant use and hammer

blows.

The blades are fitted to the handles with a

tang and a socket-like ferrule. the tang has

flat sides to prevent the handle from rotating.

The ferrule seats directly onto the shoulder

of the blade so mallet blows and usage will

make the joint tighter over time, not looser.

There are five sizes of chisels in the range,

the 1/4” and 3/8’ chisels have a primary bevel

of 30° and the 1/2”, 3/4” and 1” chisels

have a primary bevel of 25°. All the chisels

have a micro-bevel of 2°.

Veritas’ new bench chisels are an all-round

chisel. They are sturdy enough for heavier

work but are still able to be used for fine

paring and joinery.

Other contacts that may be of help:

Beyond Blue - www.beyondblue.org.au, 1300 224 636

Mensline - 1300 789 978

Lifeline - 13 11 14

Photos at left:

Top - Passing on information is an important

part of the ‘Men’s Shed’ culture.

Middle - Robert Tritchler shares his interest

in astronomy by showing us the transit

of Venus.

Bottom - Communal projects are a core

activity at ‘The Men’s Shed’.


Whittling

Away The Time

Woodworking comes in many

forms, from creating imposing

pieces of furniture that require

a workshop laden with

benches, tools and machinery

to small whimsical figures that can be

created at the kitchen table - hand-held

using only a basic kit of tools. Such are the

creations of South Australian artist Doug

Collins of ‘Waitpinga Whittling’.

In 2000 Doug and his wife Elizabeth made

the decision to retire and move to the

small hamlet of Waitpinga on the Southern

Fleurieu coast in an attempt to create a

healthier environment for Elizabeth who had

suffered an illness for many years.

Doug soon discovered that the move to the

country life was not all that he expected.

In particular, he missed the creative

stimulation that his work had afforded him.

He decided to pursue his old interest of

woodworking, but found that the demands

of traditional forms of this craft did not suit

their new lifestyle. As a carer he needed to

be on hand and close to home.

The turning point came in 2003 when they

were visited by a Canadian friend that Doug

had not seen in 30 years. He had become

a professional carver since they last met

and offered to teach Doug some whittling.

This was a revelation, it’s as basic a form

of woodwork as it gets - tool in one hand,

work in the other. There is no set up time,

you can do it anywhere and pick it up or put

it down in a second or two. At last a form of

woodwork with the flexibility that worked for

their situation.

Wild enthusiasm generated at first dozens,

then hundreds of simple, small, carved

items. Soon everyone they knew had been

given several pieces of Doug’s work and

still all the shelves in the house were filling

up with more. Someone suggested that

perhaps some of it could be loaded into

a cardboard box and sold at a local craft

market. ‘Waitpinga Whittling’ was born.

Doug emphasises that whittling is just a

hobby for him.

“I exhibit a few times a year and teach

a bit. You can’t earn a living at it unless

you’re willing to really pour everything into

it, and probably not even then. I’m not in a

position to do that, but as a creative outlet

in woodwork, it’s the ‘best fit’ for us.”

What is Whittling?

Doug defines whittling as an approach to

carving in which both the tool and the work

are held in the hands as opposed to being

bolted down or clamped. This definition

allows for a wider variety of tools to be used

than the more traditional concept of

blades only.

Whittling is by far the most suitable form of

woodworking for busy people. Most people

have a preconception that whittling requires

a lot of time. Some projects, particularly

complex ones, can require quite a few

hours, however the simplicity of whittling

makes it very easy to pick up and put down.

“It is very suitable for filling the ‘nooks and

crannies’ of life”.

Much of Doug’s work is done in increments

of half an hour or less. It also makes use

of material that in many other forms of

woodwork would be considered scrap.

Doug makes the point that Whittling can

be a great stepping stone to other, more

complex forms of woodworking. It teaches

you a great deal about wood and its

potential in a way that is relaxing and fun.

What Tools Do You Need?

Carving is such a varied art form, even

within the category of whittling, that it’s

impossible to find one tool that will do

everything. Doug does most of his work

with knife blades of one sort or another, and

supplements these with a small number

of carving chisels and occasionally power

carving tools. He explains that there are

only so many things you can accomplish

with a blade.

“Sooner or later one wants a smooth,

rounded surface. The best a blade can do

for you in that situation is a series of facets.

This is where a range of files, scrapers,

rifflers and picks, even sandpapers come

into their own. I strongly advise beginners to

acquire these things when they discover an

actual need for them. Its easy to get caught

up in the excitement and buy stuff you

don’t need.”

Equally important to your choice of tools, he

explains, is the ability to keep them sharp.

“It’s a skill that goes hand-in-glove with

carving. Many people don’t fully appreciate

what a carver means by “sharp”. There is a

world of difference between ‘kitchen sharp’

and ‘carving sharp’. It can be a contentious

issue, a bit like religion or politics. Everybody

has their own ideas of the ‘right’ way to go

about it.”

Doug has developed his own techniques

and has devised a sharpening kit that

he provides to his students. He runs

occasional classes in Victor Harbor and

in Adelaide.

Having a hobby that you find interesting and

fulfilling can be a life saver. It is somewhere

to rest your mind and concentrate your

thoughts. If you want to work with wood but

don’t have much time or the facilities to do it

in, why don’t you try some whittling. It might

just open up a whole new world for you.

Want to know more about the work of Doug

Collins or enrol in a class?

Email whittling@waitpingacliffs.com or

call 08 8552 8822.

There will be an extended version of this

article and more photos of Doug’s work on

our website in the Develop and Discover

section: www.carbatec.com.au


Half

Ship Hull Models by Gerald Coon

Half ship hull models are part of maritime

history and played an important role in the

design and manufacture of wooden boats

and ships. Traditionally they were used by

maritime designers to refine the shape of a

boat’s hull and by merchants who wanted to

show prospective customers design details

in three dimensions. Because hulls are symmetrical,

it was deemed that all the important

elements could be viewed in this half hull

format.

There were various ways of constructing the

models, they could be carved from a single

piece of wood known as a ‘block model’ or

built up using wooden layers, this was known

as a ‘lift model’. The shape is carved from

a series of strips cut to varying thicknesses

and temporarily put together. This method

required less material to be removed in the

carving process.

Lift models, could be later separated and

the pieces traced around to create a scale

drawing. These drawings were used to create

a plan for the construction of the boat. In

the case of block models, lead strips were

bent over the model where the ribs were to

be positioned or they would be cut along

vertical lines. These shaped pieces would

be drawn and then expanded to make larger

templates for the boatbuilder to follow.

At the completion of the project, the half hull

model would be presented to the owner as

a memento, it was often attached to a board

so it could be displayed. Original models are

collectors items and can be valuable. Some

designer were known to destroy them to

avoid others from copying their work.

This is a great project to make and it uses

very little material. Half hull models are evocative

pieces that have a timeless character.

To see Gerald’s instructions on how to build a

half hull model using the ‘Lift’ technique,

Go to the Develop & Discover section at www.carbatec.com.au


Machinery - Table Saws

Opt. Sliding table

CARBA-TEC ® PORTABLE SITE SAW

Rugged all-steel site or workshop saw. Wheels and handles make

for easy manoeuvring around the workshop and the legs fold up.

Includes both rear and side extension tables and full width rip fence.

Specifications

Motor

Max. Cut at 90°

Max. Cut at 45°

Motor Type

Arbor Diameter

Workshop Footprint

Shipping/Net Weight

3hp 240v

95mm

65mm

Induction

30mm

1470x2000x1000mm

60/56kg

Order no.

Price

CSB-315 $559.00

CARBA-TEC ® 10” CABINET SAW

This saw represents good value not only in the saw itself but also in

the accessory pack that converts the saw into a sliding table saw.

Specifications

Motor

Max. Cut at 90°

Max. Cut at 45°

Motor Type

Arbor Diameter

Workshop Footprint

Shipping/Net Weight

3hp 240v 15A

75mm

60mm

Induction

30mm

2220x2000x1100mm

260/250kg

Order no. Description Price

MJ2325CT 10” Cabinet Saw $1,195.00

MJ2325CTSP Sliding Table $699.00

CARBA-TEC ® 10” CONTRACTOR’S

TABLE SAW

Cast iron construction make this saw a solid performer

for the enthusiast. Made in the contractor’s style of saw,

it is easily portable especially when coupled with a mobile

base (sold separately). A quality fence and emergency

paddle STOP switch are a plus. Unit includes dust port

under the blade and mitre gauge.

Specifications

Motor

1-1/2hp 240v

Max. Cut at 90°

83mm

Max. Cut at 45°

58mm

Motor Type

Induction

Arbor Diameter 5/8”

Workshop Footprint

1440x1100x1050mm

Shipping/Net Weight

110/90kg

Order no.

Price

CTJ-650 $899.00

8

For more information & to shop online go to www.carbatec.com.au


Machinery - Cabinet Saws

CARBA-TEC ® 12” SLIDING TABLE

PANEL SAW WITH SCRIBER BLADE

CARBA-TEC ® 10” HEAVY DUTY CABINET SAW

A machine for any workshop. Powerful motor and excellent build

quality make this unit value for money as well as precise and a

superior performer. Includes router wing (router not included).

Specifications

Motor

3hp 240v, 15A

Max. Cut at 90°

77mm

Max. Cut at 45°

58mm

Motor Type

Induction

Arbor Diameter 5/8”

Workshop Footprint

1480x1110x980mm

Shipping/Net Weight

195/190kg

Order no. Description Price

TSC-10HB 10” Heavy Duty Cabinet Saw $1,849.00

TSC-10HBRF Router Fence to suit $209.00

TSC-10HBRW Router Wing to suit older model $129.00

An economy 12” panel saw with all the

features. Comes complete with 1.6m

sliding table travel, scribing blade, table

extension and overhead dust extraction

saw guard.

Specifications

Motor

Max. Cut at 90°

Max. Cut at 45°

Motor Type

Arbor Diameter

Workshop Footprint

Shipping/Net Weight

3hp, 240v, 15A

100mm

80mm

Induction

30mm

3900 x 3400 x 1000mm

255/210kg

Order no.

Price

CT-PS1600-1PH $2,495.00

CARBA-TEC ® 10” HEAVY DUTY LEFT TILTING CABINET SAW

Carba-Tec ® ’s left tilting, heavy duty table saw has a precision ground 1118 x 739mm table top. T-slotted on both sides of the blade to

hold the mitre gauge securely in place, this also means that you can use an accessory tenoning jig on either side of the blade without

any trouble. The 762mm industrial fence is made in the Biesemeyer style which provides accuracy and repeatability. The 3hp induction

motor powers poly v-belts that are mounted between a bearing assembly. This provides more efficient power transmission to the

blade.

WHY BUY A LEFT TILT? A disadvantage with a right tilting saw is the safety

hazard caused by an off cut strip of timber being caught between your rip fence, and

the saw blade that is tilted towards the rip fence. When the off cut rides up and catches

the rear teeth of your blade, severe kickback can force the off cut back towards you.

Left tilting saws are far safer, leaving off cut strips to move harmlessly to the left of the

blade. Bevel cuts are also better on a left tilting saw. Firstly, with a right tilting saw you

would usually need to put the good side down on the saw table surface. Left tilting saw

allow you to leave the good side up, away from potential damage.

Specifications

Motor

3hp 240v, 15A

Max. Cut at 90°

75mm

Max. Cut at 45°

55mm

Motor Type

Induction

Arbor Diameter 5/8”

Workshop Footprint

1650x1100x1100mm

Shipping/Net Weight

238/216kg

Order no.

Price

TSCE-10L $2,595.00

Want to see more? See our website for our full range of products. 9


Machinery - Panel Saws

SERIES

PREMIUM PERFORMANCE

12” X SERIES PREMIUM SLIDING

TABLE CABINET SAW

The TS-12R has for years been the machine of choice for trade use

and the discerning home user. Precision ground cast iron top, solid

industrial rip fence and heavy internal construction are just three of its

top features. This X series Premium model features a full sized sliding

table assembly, allowing for a fully supported sheet size crosscut,

plus massive ripping capacity on the right of the blade. This saw can

have the optional RH table board and legs fitted to extend the table

size. With the supplied dado extension, the TS-12RX series saws become

the perfect choice for the professional looking to upgrade of

the craftsmen simply wanting the best. This unit also available without

sliding table assembly, see website for details.

Specifications

Motor

3hp, 240v or 5hp, 415v

Max. Cut at 90°

100mm

Max. Cut at 45°

73mm

Motor Type

Induction

Arbor Diameter Stepped 30mm w 5/8”

Workshop Footprint

2145 x 1210 x 1050mm

Shipping/Net Weight

265/250kg

Order no.

TS-12RX-1PH

TS-12RX-3PH

Price

$3,795.00

$3,995.00

EXCALIBUR 21” PROFESSIONAL SCROLL SAW

• Quick blade changes with finger operated blade clamps, no tools required.

• Pivoting top arm for easy pin hole work.

• Head tilts 45° left and right, tilting the blade, not the table, keeping

the work piece level for better control and more accurate cuts.

• Easy access speed and tension controls.

• Organised blade storage on base.

• Onboard dust blower.

• Positive stops at common angles.

• Very low vibration through all speed ranges.

Specifications

Motor

Throat

Stroke

Table Size/Overall Size

Blade Type

Table Material

Shipping/Net Weight

Order no.

CTEX-21CE

CTEX-21-STAND

100 watts, 240v

535mm

20mm

345 x 597mm/380x812x380mm

Pinless

Plate Steel

36/32kg

Price

$895.00

$105.00

10

For more information & to shop online go to www.carbatec.com.au


Machinery - Scroll Saws

SCROLL SAW BLADES

Order no. Univ. No. Width Thick TPI Price

PGT TM PRECISION GROUND TOOTH 5” - 6 BLADES PER CARD

OLS-PG45502 - .040” .018” 12 9 Rev. $8.00

OLS-PG45702 - .046” .018” 10 7 Rev $8.00

OLS-PG45902 - .048” .018” 8 6 Rev $8.00

OLS-PG49502 - .045” .018” 12 $8.00

OLS-PG49702 - .048” .018” 10.5 8 Rev. $8.00

OLS-PG49902 - .048” .018” 9 6 Rev. $8.00

PINNED 5” BETWEEN PINS - 6 BLADES PER CARD

OLS-FR424P - .070” .010” 18.5 $7.00

OLS-FR427P - .070” .010” 25 $7.00

CARBA-TEC ® 16” VARIABLE SPEED SCROLL

SAW Designed for quick change pinned blades. This economy

model scroll saw is aimed at the entry level user. Solid cast base

provides heft. Value for money for a basic scroller starting out.

Specifications

Motor

Throat

Stroke

Table Size/Overall Size

Blade Type

Table Material

Shipping/Net Weight

70 watts, 240v

16” (406mm)

15mm

410 x 254mm/630x290x350mm

Pinned

Aluminium

24/20kg

Order no.

Price

RSS-16V $139.00

OLS-FR410P - .100” .018” 7 $7.00

OLS-SC405P - .110” .018” 20 $7.00

OLS-SC411P - .110” .018” 15 $7.00

OLS-SC412P - .110” .018” 10 $7.00

OLS-FR420RP - .110” .018” 9 + 5 $7.00

PINLESS CROWN TOOTH 5” - 12 BLADES PER CARD

OLS-CT620 - .024” .011” 20 $9.00

OLS-CT622 - .026” .013” 20 $9.00

OLS-CT623 - .032” .014” 16 $9.00

OLS-CT625 - .038” .016” 16 $9.00

OLS-CT627 - .045” .017” 11 $9.00

OLS-CT629 - .053” .018” 6 $9.00

OLS-CT632 - .065” .024” 6 $9.00

PINLESS SKIP TOOTH 5” - 12 BLADES PER CARD

OLS-FR440 2/0 .022” .010” 28 $8.00

OLS-FR443 2 .029” .012” 20 $8.00

OLS-FR445 4 .035” .015” 15 $8.00

OLS-FR446 5 .038” .016” 12.5 $8.00

OLS-FR448 7 .045” .017” 11.5 $8.00

OLS-FR450 9 .053” .018” 11.5 $8.00

OLS-FR453 12 .062” .024” 9.5 $8.00

SPIRAL 5” PINLESS - 12 BLADES PER CARD

CARBA-TEC ® 18” VARIABLE SPEED SCROLL SAW

A high performance, low-vibration scroll saw with many features

and benefits that will be of interest to the serious user.

Specifications

Motor

Throat

Stroke

Table Size/Overall Size

Blade Type

Table Material

Shipping/Net Weight

120 watts, 240v

18” (450mm)

20mm

460 x 235mm/285x620x310mm

Pinned & Pinless

Cast iron

32/29kg

Order no. Description Price

CT-SS18V 18” Variable Speed Scroll Saw $599.00

CT-SS18V-CHUCK Chucks (Set) $12.00

CT-SS18V-INS Table Insert (each) $3.50

OLS-SP461 0 .032” n/a 46 $9.00

OLS-SP463 2 .035” n/a 41 $9.00

OLS-SP465 4 .041” n/a 36 $9.00

GRIT 5” - PINLESS & PINNED - 2 BLADES PER CARD

OLS-SD42100 .156” .056 fine $10.00

OLS-SD42101 .156” .056 fine $10.00

MACH SPEED BLADES

OLS-FR643 .032” .014 13 7 Rev. $9.00

OLS-FR645 .038” .016 13 7 Rev. $9.00

OLS-FR647 .046” .017 8 6 Rev. $9.00

OLS-FR649 .055” .018 8 6 Rev. $9.00

Want to see more? See our website for our full range of products. 11


Machinery - Bandsaws

CARBA-TEC ® 10” BANDSAW

The best choice when you only need a

small bandsaw. Perfect for cutting small pen

blanks or doing model making. With similar

features to a BAS-350B in a compact design

the aluminium finned motor allows for cooler

running. This is a feature usually found in

larger saws. Includes stand, fence and mitre

gauge.

Specifications

Motor

1/2hp, 240v

Cutting cap. (depth) 125mm

Cutting cap. (width) 245mm

Max. ripping

118mm

Table size

330 x 350mm

Table tilt 0°-45°

Table height

370/1010mm

Positive stops

0°-adjustable

Wheel type

Cast alloy

Wheel diameter

255mm

Blade length

1785mm

Blade guides

Ball bearing with

manual raise/lower

Blade release

standard tension

release

Min. saw blade width 1/8” (3.2mm)

Max. saw blade width 1/4” (6.35mm)

Switch type

NVR push button

Dust port 1 x 2-1/2”

Workshop footprint 630 x 480 x 1500mm

Shipping/Net Weight 35/32kg

Order no.

Price

BAS-250B $339.00

CARBA-TEC ® 14” 2 SPEED

BANDSAW

Suitable for high speed wood cutting as well

as low speed light duty cutting of non-ferrous

metals. Includes rip fence and mitre gauge,

100mm dust outlet, hinged wheel covers, micro

adjustable ball bearing blade guides and

stable stand.

Specifications

Motor

1-1/2hp, 240v

Cutting cap. (depth) 200mm

Cutting cap. (width) 345mm

Max. ripping

205mm

Table size

550 x 400mm

Table tilt -5° - +50°

Table height

1060mm

Positive stops

0° - adjustable

Wheel type

Cast Iron

Wheel diameter

350mm

Blade length

2490mm

Blade guides

Ball bearing with

Manual raise/lower

Blade release

Std. tension release

Min. saw blade width 1/8” (3.2mm)

Max. saw blade width 3/4” (19mm)

Switch type

NVR Push Button

Dust port 1 x 4”

Workshop footprint 740 x 580 x 1740mm

Shipping/Net Weight 70/65kg

Order no.

Price

BAS-350B $649.00

CARBA-TEC ® 14” BANDSAW

A heavy duty 14” bandsaw with features

usually found on industrial models, including

rack and pinion height adjustment with

scale, professional rip fence with magnified

hairline cursor, quick release blade change,

4” dust extractor port, hinged wheel covers,

micro-adjustable ball bearing blade guides

with rack and pinion height adjustment plus

a sturdy heavy duty stand.

Specifications

Motor

1hp, 240v

Cutting cap. (depth) 200mm

Cutting cap. (width) 345mm

Max. ripping

300mm

Table size

360 x 360mm

Table tilt -15° - +45°

Table height

1070mm

Positive stops

0° adjustable

Wheel type

Cast alloy

Wheel diameter 350mm

Blade length

2553mm

Blade guides

Ball bearing with rack

& pinion crank

Blade release

Quick release lever

action

Min. saw blade width 1/4” (6.35mm)

Max. saw blade width 5/8” (16mm)

Switch type

Mechanical push

button

Dust port 1 x 4”

Workshop footprint 710 x 710 x 1760mm

Shipping/Net Weight 85/77kg

Order no.

Price

CTJ-3501 $849.00

12

For more information & to shop online go to www.carbatec.com.au


Machinery - Bandsaws

BANDSAW BLADES

Order no. Width TPI Price

9” Length 1510mm Suits DE-28-150, BS-9

BBL-1510-3-14 3mm 14 $31.00

BBL-1510-6-6 6mm 6 $19.00

BBL-1510-10-6 10mm 6 $19.00

10” 1785mm long, Suits BAS-250B, CV-83210

BBL-1785-3-14 3mm 14 $30.00

BBL-1785-6-6 6mm 6 $19.00

17”

INDUSTRIAL BANDSAWS

These industrial bandsaws have all the features! Extra heavy solid, not spoked, cast iron wheels,

increased table sizes, higher rip fences, powerful induction motors, NVR type safety switches,

door cut-out micro switches, blade tracking windows, micro-adjustable table tilting, quick release

blade change mechanisms, improved upper and lower blade guide design for superior

tracking and an easy to read magnified rip fence cursors. Combined with industry leading

specs these bandsaws are at the top of their class. All this AND a 5 Year Warranty!! No other

saw even comes close. Exclusive features package available only from CARBA-TEC ® : Table

extension on LH side, heavy duty cast iron wheels, rip fence with increased height and magnetic

switch gear with real key lockout. Our machines also conform to the CE safety scheme.

Specifications SBW-4300CE (17”) SBW-4800CE (19”) SBW-5300CE (21”)

Motor 2hp, 240v 2hp, 240v 3hp, 240v

Cutting Capacity (depth) 300mm 300mm 300mm

Cutting Capacity (width) 410mm 462mm 514mm

Max. ripping 375mm 425mm 475mm

Table Size 610 x 440mm 680 x 490mm 685 x 540mm

Table tilt -10° - +45° -10° - +45° -10° - +45°

Table height 950mm 950mm 950mm

Positive stops 0° adjustable 0° adjustable 0° adjustable

Wheel type Cast iron Cast iron Cast iron

Wheel diameter 425mm 480mm 530mm

Blade length 3335mm 3635mm 3865mm

Blade guides

Ball bearing with rack &

pinion crank

Ball bearing with rack

& pinion crank

19” & 21”

Ball bearing with rack &

pinion crank

Blade release Quick lever action Quick lever action Quick lever action

Min. saw blade width 1/8” (3.2mm) 1/8” (3.2mm) 1/8” (3.2mm)

Max. saw blade width 1” (25mm) 1-1/4” (32mm) 1-1/4” (32mm)

Switch type Key Lock NVR type Key Lock NVR type Key Lock NVR type

Dust port 2 x 4” 2 x 4” 2 x 4”

Workshop footprint 780 x 790 x 1930mm 920 x 850 x 2020mm 1020 x 790 x 2040mm

Shipping/Net Weight 146/121kg 174/145kg 196/163kg

Price $1,649.00 $1,795.00 $2,249.00

BBL-1785-6-10 6mm 10 $19.00

BBL-1785-10-6 10mm 6 $19.00

14” 2375mm long. Suits SW-1401, SBW-3501,

BS-14

BBL-2375-3-14 3mm 14 $39.00

BBL-2375-6-4 6mm 4 $19.00

BBL-2375-6-6 6mm 6 $19.00

BBL-2375-6-10 6mm 10 $19.00

BBL-2375-6-24 6mm 24 $19.00

BBL-2375-10-4 10mm 4 $19.00

BBL-2375-10-6 10mm 6 $19.00

BBL-2375-10-10 10mm 10 $19.00

BBL-2375-10-24 10mm 24 $19.00

BBL-2375-13-3 12mm 3 $19.00

BBL-2375-13-4 12mm 4 $19.00

BBL-2375-13-6 12mm 6 $19.00

BBL-2375-13-8 12mm 8 $19.00

BBL-2375-13-10 12mm 10 $19.00

BBL-2375-13-24 12mm 24 $19.00

BBL-2375-16-3 16mm 3 $26.00

BBL-2375-16-4 16mm 4 $26.00

BBL-2375-20-3 20mm 3 $30.00

14” 2490mm long, Suits BAS-350B

BBL-2490-3-14 3mm 14 $32.00

BBL-2490-6-6 6mm 6 $20.00

BBL-2490-6-10 6mm 10 $20.00

BBL-2490-10-10 10mm 10 $20.00

BBL-2490-13-6 12mm 6 $20.00

BBL-2490-20-3 20mm 3 $31.00

14” 2553mm long. Suits CTJ-3501

BBL-2553-6-6 6mm 6 $20.00

BBL-2553-10-6 10mm 6 $20.00

BBL-2553-13-4 12mm 4 $20.00

BBL-2553-13-6 12mm 4 $20.00

BBL-2553-16-4 16mm 4 $27.00

BBL-2553-20-3 20mm 3 $31.00

14” 2680mm long, *Suits SW-1401, SBW-3501

BBL-2680-3-14 3mm 14 $39.00

BBL-2680-10-4 10mm 4 $21.00

BBL-2680-10-6 10mm 6 $21.00

BBL-2680-10-10 10mm 10 $21.00

BBL-2680-16-3 16mm 3 $29.00

BBL-2680-16-4 16mm 4 $29.00

BBL-2680-20-3 20mm 3 $32.00

17” 3335mm long, Suits SBW-4300CE

BBL-3335-6-6 6mm 6 $27.00

BBL-3335-13-6 13mm 6 $27.00

BBL-3335-27-3 27mm 3 $51.00

*BBL-2680-3-14 suits SW-1401 with riser kit only.

Want to see more? See our website for our full range of products. 13


Machinery - Jointers

TB-6

CARBA-TEC ® 6” BENCHTOP JOINTER

Built with cast iron construction, this jointer provides big

machine table and fence features in a portable size.

CTJ-196

CARBA-TEC ® 6” HEAVY

DUTY JOINTER

A truly professional machine suitable

for any DIY or trade workshop.

CTJ-350

CARBA-TEC ® INDUSTRIAL 8”

LONG BED JOINTER

Simply the best jointer in its class bar none! Extra long 1950mm

bed for stock support, and superior parallelogram system for easy

and accurate table adjustments. This system also produces less

chipping as the tables follow the arc of the cutterblock when raising

or lowering the table. It also makes for more positive adjustment

and there is no slack as found with ordinary screw type adjustment

wheels. A centre-mounted, tilting fence provides solid support, and

a triple blade cutterhead gives a smooth cut at 16,500 cpm.

CTJ-150

CARBA-TEC ® 6” INDUSTRIAL

LONG BED JOINTER

Perfect addition to any workshop. The extra bed length in this

machine make it as accurate and true without being too cramped

for space.

CTJ-360

CARBA-TEC ® INDUSTRIAL 12”

LONG BED JOINTER

Fitted with superior parallelogram system for easy and accurate

table adjustment. Rack and pinion fence adjustment and high

mounted switch for safe and easy operation. Perfect for the large

workshop or in heavy production environment.

Specifications TB-6 CTJ-196 CTJ-150 CTJ-350 CTJ-360-1PH

Motor 1-1/2hp, 240v 1hp, 240v 1hp, 240v 1-1/2hp, 240v 3hp, 240v

Table length 730mm 1180mm 1410mm 1950mm 2120mm

Table width 155mm 170mm 152mm 200mm 320mm

Rabbeting Capacity N/A 15 x 152mm 15 x 152 17 x 200mm 20 x 300mm

Fence tilt -45° to +45° -45° to +45° -45° to +45° -45° to +45° -45° to +45°

Fence stops -45°/90°/+45° -45°/90°/+45° -45°/90°/+45° -45°/90°/+45° -45°/90°/+45°

Cutter knives 2 3 3 3 3

Workshop Footprint - 1180x710x960mm 1410x600x1310mm 1950 x 670 x 1310mm 2120 x 990 x 1060mm

Shipping/Net Weight 45/42kg 116/105kg 150/135kg 245/230kg 470/440kg

Price $329.00 $649.00 $799.00 $1,295.00 $3,295.00

Order no. Suits Blades Price

BLADE-TB6 TB-6 HSS Blades $32.00

BLADE-6 CTJ-196, CTJ-150 6” HSS Blades set of 3 $27.00

BLADE-6-T CTJ-196, CTJ-150 6” HSS with 18% Tungsten Set of 3 $39.00

Order no. Suits Blades Price

BLADE-8 CTJ-350 8” HSS Blades set of 3 $39.00

BLADE-8-T CTJ-350 8” HSS with 18% Tungsten Set of 3 $49.00

CTJ-360-BLADE CTJ-360 12” HSS Blades Set of 3 $99.00

14

For more information & to shop online go to www.carbatec.com.au


Machinery - Jointers

SERIES

PREMIUM PERFORMANCE

SPIRAL HEAD INDUSTRIAL 8”

LONG BED JOINTER

Specifications

Motor

Table length

Table width

Rabbeting Capacity

Cutterhead spiral

Workshop footprint

Shipping/Net Weight

1-1/2hp, 240v

1950mm

200mm

17 x 200mm

40 insert knives

1950 x 670 x 1310mm

245/230kg

Order no. Description Price

CTJ-350X

Jointer $1,795.00

BLADE-X-10 10 Insert Cutters $69.00

BLADE-X-SCREW 10 Screws $4.00

The Spiral Advantage

• Smoother cuts

• Less tearout, vibration & machine wear

• Less noise

• Long life fine grain carbide

• Fully indexed cutters

• Better chip ejection

• Rapid cutter change

• Dynamically balanced head

• Four rotatable cutting edges

SPIRAL HEAD INDUSTRIAL 12”

LONG BED JOINTER

Specifications

Motor

Table length

Table width

Rabbeting Capacity

Cutterhead spiral

Workshop footprint

Shipping/Net Weight

3hp, 240v

2120mm

320mm

20 x 300mm

52 insert knives

2120 x 990 x 1060mm

470/440kg

Order no. Description Price

CTJ-360X-3PH Jointer $3,995.00

BLADE-X-10 10 Insert Cutters $69.00

BLADE-X-SCREW 10 Screws $4.00

Want to see more? See our website for our full range of products. 15


Machinery - Thicknessers

CARBA-TEC ® 12-1/2” THICKNESSER

This entry level thicknesser is suitable for the home, workshop or

light trade use. Twin return rollers on top with infeed and outfeed

rollers mounted at end of feed tables.

Specifications

Motor

Max. cutting width

Max./Min thickness of stock

Max. cutting depth

Infeed/outfeed roller

Cutterhead

Table Size

Shipping/Net Weight

2hp, 240v

318mm

150mm/ 5mm

3mm/pass

Polyurethane

2 knives

320x690mm

34.5/30.5kg

Order no. Description Price

CT-317 12-1/2” Thicknesser $429.00

PS-330 Generic Stand $79.00

CT-317-CHUTE 4” Dust Chute $45.00

BLADE-12.5 HSS Blades (2) Double Bevel $45.00

BLADE-12.5-T 18% Tungsten Blades (2) Single Bevel $59.00

13” CARBA-TEC ® THICKNESSER & MOULDER

This unit accommodates a wide range of moulding knives (not

included) to produce various patterns for application in decoration,

furniture parts, door and window frames etc.

Specifications

Motor

Max. cutting width

Max./Min thickness of stock

Max. cutting depth (plane/mould)

Infeed/outfeed roller

Cutterhead

Table Size

Shipping/Net Weight

2hp, 240v

330mm

150mm/5mm

3mm/pass, 1.6mm/pass

Polyurethane

3 knives

330x490mm

58/55kg

Order no. Description Price

CT-236 13” Thicknesser & Moulder $1,195.00

CT-236-CHUTE 4” Dust Chute $59.00

CT-236-BLADESET Set of Moulding blades - 5 styles $259.00

BLADE-13-T 13” TCT Planer Blade Set $69.00

CARBA-TEC ® 15” THICKNESSER

A fantastic machine at a fantastic price. This machine has

a powerful motor, 3-knife cutterhead, serrated infeed roller,

polyurethane outfeed roller, anti-kickback fingers and adjustable

bed rollers. This machine is now fitted with cast

iron tables on both the in and outfeed side instead of

cheap rollers. Two feed speeds and a rise and fall head

round out the long list of features on this machine. Price

includes dust chute with 4” outlet, integral mobile base,

paddle style stop switch.

Note: 240v, 15amp circuit/plug and minimum 1200cfm dust

extractor required for this machine.

Specifications

Motor

3hp, 240v, 15A

Max. cutting width 381mm

Max./Min thickness of

stock

170mm/6mm

Feed rates

5/9Mpm

Max. cutting depth 3mm/pass

Infeed/outfeed roller Serrated/Polyurethane

Cutterhead

3 knives

Re-sharpenable blades Yes

Table Type

Cast iron - Fixed

Table size

1070 x 381mm

Dust Chute 1 x 4”

Workshop footprint 820 x 1070 x 1300mm

Shipping/Net Weight 211/199kg

Order no. Description Price

CTJ-680 15” Thicknesser

$1,349.00

BLADE-15 15” HSS blades(3)

$69.00

BLADE-15-T 15” HSS blades w/18% tungsten(3) $89.00

16

For more information & to shop online go to www.carbatec.com.au


Machinery - Thicknessers

CARBA-TEC ® 15”

INDUSTRIAL

THICKNESSER

The feature filled

CTJ-381 is a welcome

addition to any shed or

workshop. Machine is fitted

with full cast iron tables on

both the in and outfeed side.

Machine is fitted with integral

mobile base. Note: 240v,

15amp circuit/plug and minimum

1200cfm dust extractor

required for this machine.

Workshop footprint same as

CTJ-381X.

SERIES

PREMIUM PERFORMANCE

Specifications

Motor

3hp, 240v, 15A

Max. cutting width

381mm

Max./Min thickness of stock

205mm/6mm

Max. cutting depth

3mm pass

Infeed/outfeed roller

Serrated/Polyurethane

Cutterhead

3 knives

Shipping/Net Weight

290/260kg

Order no. Description Price

CTJ-381 15” Thicknesser $1,495.00

BLADE-15 15” HSS Blades (3) $69.00

BLADE-15-T 15” HSS Blades w/18% tungsten (3) $89.00

CARBA-TEC ®

20” INDUSTRIAL

THICKNESSER

Available in 3hp

or 5hp motor to

suit any workshop

or industrial setup.

Large cutting capacity,

heavy castings make this

machine a solid performer.

Machine is fitted with

integral mobile base.

Note: 240v, 15amp

circuit/plug and minimum

1200cfm dust extractor

required for this machine.

Specifications

Motor

Max. cutting width

Max./Min thickness of stock

Max. cutting depth

Infeed/outfeed roller

Cutterhead

Workshop Footprint

Shipping/Net Weight

3hp, 240v 15A, or 5hp 415v

508mm

210mm/6mm

4mm/pass

Serrated/knurled metal

4 knives

1000x1410x1120mm

420/380kg

Order no. Description Price

CTJ-508-1PH 3hp, 240v, Single phase $2,195.00

CTJ-508-3PH 5hp, 415v, Three phase $2,195.00

BLADE-20 20” HSS Blades (4) $129.00

BLADE-20-T 20” HSS Blades with 18% tungsten (4) $159.00

X SERIES SPIRAL HEAD 15”

PREMIUM THICKNESSER

The feature filled ‘X Series’ CTJ-381 is a welcome addition to

any shed or workshop. This machine has a powerful motor,

74-knife cutterhead, serrated infeed roller, polyurethane outfeed

roller, anti-kickback fingers, adjustable bed rollers and

front mounted NVR magnetic safety switch. Machine is fitted

with full cast iron tables on both the in and outfeed side instead

of cheap, light duty rollers. Two feed speeds and rise and fall

table round out the long list of features on this machine. The

motor is mounted in the lower cabinet, and this allows for the

top mounted return rollers. Machine is also fitted with integral

mobile base and dust chute with 4” chute.

Note: 240v, 15amp circuit/plug and minimum 1200cfm dust extractor

required for this machine.

Specifications

Motor

3hp, 240v, 15A

Max. cutting width

381mm

Max./Min thickness of stock 205mm/6mm

Feed Rates

5/9Mpm

Max. cutting depth

1.5mm/pass

Infeed/outfeed roller

Serrated/Polyurethane

Cutterhead Spiral

74 insert knives

Table Type

Cast iron - Rise and Fall

Table Size

1070 x 381mm

Dust chute 1 x 4”

Workshop Footprint

820 x 1070 x 1160mm

Shipping/Net Weight

290/260kg

Order no. Description Price

CTJ-381X

15” Thicknesser

$2,595.00

BLADE-X-10 Insert Cutters (10)

$69.00

BLADE-X-SCREW Screws (10)

$4.00

Want to see more? See our website for our full range of products. 17


Machinery - Combination Planer/Thicknessers

The Spiral Advantage

• Smoother cuts

• Less tearout, Less vibration, Less machine wear

• Less noise

• Long life fine grain carbide

• Fully indexed cutters

• Better chip ejection

• Rapid cutter change

• Dynamically balanced head

• Four rotatable cutting edges

SERIES

PREMIUM PERFORMANCE

SPIRAL HEAD 10”

COMBO

PLANER/

THICKNESSER

A real space saver

in the workshop.

Features flip up

tables for conversion

to thicknesser, tables

have noise dampening

slots, serrated steel infeed

roller is standard. European

style alloy cutterhead guard.

Note: Minimum 1200cfm

dust extractor required for this

machine.

Spiral cutterhead

Specifications

Motor

Max. cutting width

Max./Min thickness of stock

Max. cutting depth

Infeed/outfeed roller

Cutterhead

Workshop Footprint

Shipping/Net Weight

1-1/2hp, 240v

250mm

180mm/6mm

2mm

Serrated/Steel

(AW106PTX)Spiral/(AW106PT)Straight

1100x800x1000mm

165/150kg

Order no. Description Blades Price

AW106PTX 10” Planer/Thicknesser Spiral

AW106PT 10” Planer/Thicknesser Straight

$1,849.00

$1,349.00

X SERIES SPIRAL HEAD 20”

PREMIUM THICKNESSER

Fitted with cast iron rise and fall table, adjustable bed rollers,

cast iron in and outfeed tables and integral mobile base. A front

mounted NVR magnetic safety switch, 5” rear dust collection

port, top mounted return rollers and shielded turret guards add

to the great value package on offer. Available in 3hp (240v)

or 5hp (415v) motor to suit any workshop or industrial setup.

Large cutting capacity, heavy castings make this machine a

solid performer. Note: 240v, 15amp circuit/plug and minimum

1200cfm dust extractor required for this machine.

Specifications

Motor

3hp, 240v, 15A or 5hp 415v

Max. cutting width

508mm

Max./Min thickness of stock

210mm/6mm

Feed Rates

4.8/6.2Mpm

Max. cutting depth

1.5mm/pass

Infeed/outfeed roller

Serrated/knurled metal

Cutterhead Spiral

98 insert knives

Table Type

Cast iron - Rise and Fall

Table Size

1410 x 508mm

Dust chute 1 x 5”

Workshop Footprint

1000 x 1410 x 1120mm

Shipping/Net Weight

420/380kg

Order no. Description Price

CTJ-508X-1PH 3hp, 240v, 1PH

$3,695.00

CTJ-508X-3PH 5hp, 415v, 3PH

$3,695.00

BLADE-X-10 Insert Cutters (10)

$69.00

BLADE-X-SCREW Screws (10)

$4.00

WOODFAST 12” COMBO PLANER/THICKNESSER

This deluxe machine features quick and easy changes between functions,

analogue thickness height counter, heavy duty ribbed cast iron

tables, large front adjusting fence and European style alloy cutterhead

guard. A heavy duty quality space saver for your workshop.

Note: 240v, 15amp circuit/plug and minimum 1200cfm dust extractor

required for this machine.

Specifications

Motor

3hp, 240v 15A

Max. cutting width

305mm

Max./Min thickness of stock

200mm/6mm

Max. cutting depth

3mm

Infeed/outfeed roller

Serrated/Steel

Cutterhead

3 knives

Workshop Footprint

1400x650x1000mm

Shipping/Net Weight

190/175kg

Order no. Description Price

WPT-310 12” Planer/Thicknesser $1,695.00

BLADE-WPT310 Set of 3 Blades $79.00

18

For more information & to shop online go to www.carbatec.com.au


Machinery - CNC Machines

CNC ROUTER SHARK ©

Carba-Tec ® are proud to distribute the CNC Shark © and CNC Shark

Pro © PLUS to the Australian market. Appealing to both the informed

CNC user, and entry level hobby user alike. They are both very portable

machines and can offer consistent results and repeatability.

These CNC machines are designed for routing all types of wood,

routing or engraving plastics, and even etching or cutting tile. With

some adaptation, non-ferrous metals could also be cut.

The CNC Shark © and CNC Shark Pro © PLUS are by far the best

value complete CNC system available. They are made of steel, aluminium

and high-density polyethylene construction which makes

them robust yet light weight and very stable.

These impressive machines have

• Power

• Speed

• Accuracy

• Ease of use

• High quality design

• Local technical support & after sales service

CNC ROUTER SHARK PRO PLUS ©

Specifications

Motor

Motor Speed

Maximum work size

Travel

Jog Control

Bearings

Interface

Thread

Resolution

Stepper Motor Specs

Power supply to

steppers

Software

PC requirements

Control Program

Workshop footprint

Shipping/Net Weight

550 watt 1/4” shank capacity router (supplied)

33,000rpm

635 x 635mm (unlimited length by repositioning)

X:605mm, Y: 605mm, Z: 127mm

3 speed via software - keyboard or keypad

12 linear bearings ( 4 on each axis)

USB2.0 with on controller memory storage capability

ACME precision threads

Less then ±0.001” (±0.0254mm)

9.368 kg - cm 1.8° steppers

24 volt

VCarve Pro 6.0 & Cut 3D software (included)

Win 2000, XP or Vista, Pentium 4, 2.0GHz - 1Gb RAM

(2gb recommended) 1024x768 graphics display -

60mb free hard drive space

Downloadable (free)

900x600x550mm

65/60kg

CNC ROUTER SHARK ©

Specifications

Motor

Motor Speed

Maximum work size

Travel

Jog Control

Bearings

Interface

Thread

Resolution

Stepper Motor Specs

Power supply to

steppers

Software

PC requirements

Control Program

Workshop footprint

Shipping/Net Weight

550 watt 1/4” shank capacity router (supplied)

33,000rpm

300 x 600mm

X:300mm, Y: 600mm, Z: 105mm

3 speed via software - keyboard or keypad

12 linear bearings ( 4 on each axis)

USB2.0 with on controller memory storage capability

ACME precision threads

Less then ±0.001” (±0.0254mm)

9.368 kg - cm 1.8° steppers

24 volt

VCarve Pro 6.0 (included)

Win 2000, XP or Vista, Pentium 4, 2.0GHz - 1Gb RAM

(2gb recommended) 1024x768 graphics display -

60mb free hard drive space

Downloadable (free)

900x450x550mm

41/38kg

Order no.

CNC-SHARK-KIT-PP

Price Order no.

Price

$5,995.00 CNC-SHARK-KIT

$4,895.00

Both machines are shipped complete (with only very minimal

assembly required), and are basically ‘Plug and Play’. Vectric’s

VCarve Pro V6.0 Design Software is included with both models,

and this provides an easy to use point and click method of designing

signs, patterns and complex repetitive cut jobs. Design work

can be just as easily done in programs such as Corel Draw or

Adobe Illustrator, in which you can export/import direct to VCarve

Pro for tool path assignment and batch processing. VCarve Pro

then creates the machine coding (G Code) required by the device

driver interface (free download), to run the unit. The CNC Shark ©

and CNC Shark Pro © PLUS driver interface can also process files

exported from other well recognised programs such as: Photo

Carve, 3D Cut, BobCad, BobART, BobNestCad, Mach 3 and Lazy

Cam. They are powered by an industrial duty 550W Bosch Blue

GMR-1 router (included) and both units are supplied with hardware,

transformer, controller, software, clamps, cables and router

bit. All you need is a PC (or laptop), a USB port, a standard 3 pin

appliance lead, some timber and an imagination. Get creative...

the new age way!

Want to see more? See our website for our full range of products. 19


Machinery - Sanders

CARBA-TEC ® 400MM WIDE

DRUM SANDER

Ideal for finish sanding or can be used

as a finish planer for curly grained timber.

Constructed from cast and machined alloy

to provide great accuracy and trouble

free operation. Features variable feed

conveyor.

CARBA-TEC ® 12” DISC

SANDER WITH BRAKE

A quality machine for any workshop. Cast

iron body construction with an alloy table.

Unlike most sanders that run at twice the

speed this machine make it almost impossible

to burn the wood being sanded and

greatly prolongs the life of the paper. Mitre

gauge included. See pg. 37 for replacement

sanding accessories.

Specifications

Motor

1hp, 240v

Disc RPM

1,440rpm

Disc Diameter 300mm (12”)

Table Size

440 x 156mm

Table Tilt

45° up & 45° down

Shipping/Net Weight 31/29kg

Order no.

Price

DSB-12B $189.00

Specifications

Motor

Conveyor motor

Max. sanding width

Max. sanding thickness

Min. sanding thickness

Drum diameter

Workshop footprint

Shipping/Net Weight

Order no.

1hp, 240v

50W

400mm, 2

pass=800mm

135mm

6mm

130mm

900 x 600 x 720mm

55/53kg

Price

WDS-400 $739.00

WDS-400-STAND $50.00

Order no. Repl. Paper Price

WDS-SP-60 60 grit wrap $17.00

WDS-SP-80 80 grit wrap $17.00

WDS-SP-120 120 grit wrap $17.00

WDS-SP-180 180 grit wrap $17.00

WDS-SP-240 240 grit wrap $17.00

CARBA-TEC ® BENCH TOP

OSCILLATING SPINDLE SANDER

Includes 1/4”, 1/2”, 5/8”, 1-1/2” and 2” spindles

and sleeves. Made in Taiwan. See website

for replacement sanding accessories.

Specifications

Motor

1/2hp, 240v

Motor Speed

1440rpm

Oscillating stroke 25mm

Oscillates per minute 30

Table size/height 370 x 370mm/ 470mm

Table tilt

10° L & 45° R

Shipping/Net Weight 40/37kg

Order no.

Price

OVS-CT $459.00

CARBA-TEC ® OSCILLATING

SPINDLE SANDER

This professional quality, freestanding spindle

sander comes standard with a great

range of 10 spindle tubes, and would be

suited to both production workshops,

schools, and serious home workshops. Includes

1/4”, 3/8”, 1/2”, 5/8”, 3/4” 1”, 1-1/2”,

2”, 3” and 4” See website for repl. sleeves.

Specifications

Motor

1hp, 240v

Motor Speed

1725rpm

Oscillating stroke 38mm

Oscillates per minute 75

Table size

615x620mm

Table tilt 0° to 20° & 0° to 45°

Workshop Footprint 620x620x1100mm

Shipping/Net Weight 175/168kg

Order no.

Price

SS-3501 $1,595.00

CARBA-TEC ® OSCILLATING

‘BIG BOY’ SANDER

Belt can be used in vertical or in horizontal

mode. Quick action release under the main

cast iron table allow for fast and easy switching

between sanding modes. Includes mitre

gauge, stand, sanding belt, main and spindle

end table. See pg. 37 for replacement

sanding accessories.

Specifications

Motor

1-1/2hp, 240v

Motor RPM

2850rpm

Belt size

150 x 2260mm

Sanding belt tilt 0° to 90°

Sanding bobbin 4-1/2”

Workshop footprint 1270 x 570 x 1200mm

Shipping/Net Weight 115/107kg

Order no.

Price

BB-80S $1,049.00

20

For more information & to shop online go to www.carbatec.com.au


Machinery - Sanders

CARBA-TEC ® 6” X 9”

COMBINATION

BELT/DISC SANDER

Our top selling sanding unit. Heavy cast

construction with dual location, tilting work

table. This latest model now features a

NVR type safety switch, and includes a

great metal stand. Belt can be used vertically

and horizontally. Disc table tilts up to

45°. Standard equipment includes graphite

slip cloth underneath the belt. Also fitted

with quick change hook and loop 9”

disc.

Includes stand, mitre gauge, sanding belt

and hook and loop disc. See pg. 37 for

replacement. sanding accessories.

Specifications

Motor

3/4hp

Belt size

150 x 1220mm

Disc Diameter 229mm (9”)

Table Size Disc/Belt 310 x 160mm

Table Tilt 0° to 45°

Dust port 2 x 1-1/2”

Mitre gauge

Included

Quick release belt Yes

Workshop footprint 740 x 520 x 1400mm

Shipping/Net Weight 54/51kg

Order no.

Price

SB-609 $339.00

CARBA-TEC ® 6” X

12” COMBINATION

OSCILLATING

BELT/DISC

SANDER

Belt can be used in vertical

and horizontal positions.

Mitre gauge and starter

abrasives (80 grit) included

with the machine. See

pg. 37 for replacement.

sanding accessories. Now

featuring a 2hp motor.

Specifications

Motor

1-1/2hp, 240v

Belt size

150 x 1220mm

Disc Diameter

305mm

Table size (Disc)

177 x 406mm

Table tilt 0° to 45°

Workshop footprint

597 x 533 x 1409mm

Shipping/Net Weight

98/85kg

Order no.

Price

SBD-6012QC $1,049.00

CARBA-TEC ® 25” TWIN DRUM SANDER

The variable speed rubberised feed belt is ideal for feeding panels

without any damage to the underside of the panel. Featuring two

independently adjustable drums. See website for replacement

sanding wraps. Note: A minimum 1200cfm dust extractor required.

Specifications

Main/Conveyor Motor

Max. sanding width

Max./Min. sanding thickness

Drum diameter

Drum Speed

Workshop footprint

Shipping/Net Weight

Drum setting gauge.

3hp, 240v/1.6hp

620mm

135mm/6mm

127mm

1440rpm

1130 x 780 x 1300mm

210/199kg

Order no.

Price

MS-25B $2,395.00

Want to see more? See our website for our full range of products. 21


Machinery - Router Tables

CARBA-TEC ® CAST IRON TOP

ROUTER TABLE

Features universal router mounting system. Fits

most 1/2” routers. Table tilts to 45° for easy under

table access. Fitted with removable key switch,

cast iron dust housing, 2 spring steel hold-downs.

Also features a split fence. Stand included. Working

height 850mm. Standard 3/4” x 3/8” mitre slot for

accessory and jig fitment. Router Bit not included.

Specifications

Motor

Supplied by user

Table Material

Cast iron

Fence Type

Aluminium 2 piece

Table size

680 x 505mm

Dust port 1 x 4”

Workshop footprint 900 x 780 x 1,120mm

Shipping/Net Weight 56/51kg

Order no.

Price

RT-017 $329.00

KREG ® BENCHTOP ROUTER TABLE

Built from the ground up as the portable solution to precision routing,

this table provides trim carpenters and other mobile professionals

with the quality materials and attention to detail that they’re only

used to finding in large router tables. Standard 3/4” x 3/8” mitre slot

for accessory and jig fitment.

Specifications

Motor

Supplied by user

Table Material

Easy Slide Tm Micro Dot MDF

Fence Type

Anodized aluminium

Table Size

610x405mm

Dust Port 2-1/2”

Workshop Footprint

720x515x508mm

Shipping/Net Weight

15/12kg

Order no.

Price

KR-PRS2000 $299.00

SLIDING ROUTER TABLE

With independent infeed and outfeed fence, hold down work clamp,

mitre gauge and gas struts to assist table lift. Suits most 1/2” routers.

Includes stand. Router bit not included.

Specifications

Motor

Supplied by user

Table Material

Cast iron with aluminium slide table

Fence Type

Aluminium 2 piece

Table Size

560x790mm

Dust Port

1x2-1/2”

Workshop Footprint 1560x790x1100mm

Shipping/Net Weight 76/71kg

Order no.

Price

MS-RB $495.00

22

For more information & to shop online go to www.carbatec.com.au


Machinery - Router Tables/Spindle Shapers

KREG ® PRECISION ROUTER TABLE

Whether you’re routing a simple dado, putting an edge on a countertop,

or building an entire set of raised panel doors, this router table

can help you finish projects faster, and with greater accuracy than

ever before. Router not included. Standard 3/4” x 3/8” mitre slot for

accessory and jig fitment. Adjustable stand included.

Specifications

Motor

Supplied by user

Table Material

Easy Slide TM Micro-Dot MDF

Fence Type

Anodized aluminium

Table Size

810 x 610mm

Dust Port 2-1/2”

Workshop Footprint

950 x 645 x 925mm

Shipping/Net Weight

44/38.5kg

Order no.

Price

KR-PRS1040 $599.00

ROUTER TABLE WITH TENONING ATTACHMENT

This heavy duty solid cast iron table top is the most sophisticated

router table we have ever seen. Includes stand, feather board and

mitre gauge. Standard 3/4” x 3/8” mitre slot for accessory and jig

fitment. Includes accurate sliding tenoning attachment.

Specifications

Motor

Supplied by user

Table Material

Cast iron

Fence Type

Cast iron 1 piece

Table Size

665 x 475mm

Dust Port 1 x 4”

Workshop Footprint

830 x 850 x 1110mm

Shipping/Net Weight

68/63kg

Order no.

Price

RT-660 $849.00

CARBA-TEC ® 3/4”

SPINDLE SHAPER

Extra large heavy cast iron table

with surface ground finish

with two spindle speeds and

reverse. Independent infeed

and outfeed fences feature

precision micro-adjustment.

Includes integral mobile base

and standard 3/4” x 3/8” mitre

track.

Specifications

Motor

2hp, 240v

Spindle Speeds

5,000 & 8,000rpm

Spindle Tilt

No

Table Size

710 x 760mm

Table opening dia.

76, 89 & 178mm

Spindle Size 3/4”

Workshop Footprint

710 x 760 x 1200mm

Shipping/Net Weight

160/145kg

Order no.

Price

CTJ-310 $1,195.00

CARBA-TEC ® TILTING HEAD

SPINDLE MOULDER

Sturdy cast iron and steel cabinet construction, tilting head, cast iron

cutter guard, micro adjustable fence and sliding table make this a

great choice for any workshop.

Specifications

Motor

3hp, 240v 15A

Spindle Speeds

1800, 3000, 6000, 9000rpm

Spindle Tilt

-10° to+30°

Table Size

710 x 640mm plus slide table

Table opening dia. 200mm

Spindle Size

30mm

Workshop Footprint 1350 x 2200 x 1340mm

Shipping/Net Weight 222/199kg

Order no.

Price

SK-100T $1,995.00

Want to see more? See our website for our full range of products. 23


Machinery - Mortiser

CARBA-TEC ®

BENCHTOP CHISEL

MORTISER

This machine has the huge benefit

of both lateral and longitudinal

movement. Workpieces can be

moved by moving the table instead

of moving the workpiece, this

eliminates error in that finer adjustments

can be made. Refer to page

33 for chisels and accessories.

CARBA-TEC ® PROFESSIONAL

CHISEL MORTISER

Refer to page 33 for chisels

and accessories.

Stand included.

Specifications

Motor

Chisel RPM

Drill chuck capacity

Table Size

Travel

Workshop Footprint

Shipping/Net Weight

1/2hp, 240v

1400rpm

13mm

460 x 190mm

Lateral-170mm, Longitudinal-70mm

670x450x340mm

42/40kg

Order no.

Price

CT-HM16D $319.00

CARBA-TEC ® CHISEL

MORTISER

A robust mortiser of cast iron

construction, plenty of power

to cut 19mm mortises. The

table movement is controlled

by two hand wheels, one

for longitudinal and one for

transverse movement; the

movement is smooth and

precise with dovetail slides

and jib strips for longer life.

Refer to page 33 for chisels

and accessories.

Specifications

Motor (fan cooled ribber)

1hp, 240v

Chisel RPM

1400rpm

Drill chuck capacity

16mm

Max. chisel size

25.4mm

Centre of chisel to fence

145mm

Chisel shank size 3/4” & 13/16”

Chisel stroke

220mm

Max. height with 12.7mm chisel 220mm

Table size

400x150mm

Workshop Footprint

820 x 550 x 1720mm

Shipping/Net Weight

131/125kg

Order no.

Price

CT-HM25D $689.00

Specifications

Motor (rolled steel)

1hp, 240v

Chisel RPM

1720rpm

Head tilt Yes, R/L to 30°

Drill chuck capacity

13mm

Centre of chisel to fence

76mm

Min./Max. chisel size

6.35/25.4mm

Chisel shank size 5/8” & 3/4”

Chisel stroke

170mm

Table size

200 x 450mm

Table travel (longitudinal/Lateral) 370mm/70mm

Workshop Footprint

680 x 840 x 2000mm

Shipping/Net Weight

105/98kg

Order no.

Price

SL-2500HB $1,595.00

SL-2500HB-STAND $119.00

CARBA-TEC ®

HORIZONTAL

MORTISER/BORER

This is the ideal solution for a

workshop that does not want to

use their drill press as a mortising

machine. The motor is powerful

enough to cut most wood

materials with ease. This machine

is an excellent addition to any

workshop.

Specifications

Motor

Spindle speed

Chuck capacity

Table Size

Travel

Workshop Footprint

Shipping/Net Weight

3hp, 240v

2840rpm, LH rotation

0-20mm

460 x 190mm

Transverse-135mm, Longitudinal-175mm, Vertical-115mm

780x860x1500mm

120/90kg

Order no.

Price

HM-3016 $799.00

24

For more information & to shop online go to www.carbatec.com.au


Machinery - Drill Press

RDP-116 CARBA-TEC ®

RADIAL DRILL PRESS

Radial drill presses are designed

for complex compound

angle drilling. Chuck to column

capacity is variable from 130 -

420mm due to the sliding horizontal

column.

DP-4116F

CARBA-TEC ®

PEDESTAL

DRILL PRESS

Designed to stand alone on the

floor of the workshop. Cast iron

pulley system reduces belt slip,

vibration and produces more inertia

due to the extra weight.

DP-4119F

CARBA-TEC ®

PEDESTAL

DRILL PRESS

Designed to stand alone on the

floor of the workshop. The drill

press is fitted with provision for

a work light between the chuck

and the column. Cast iron pulley

system reduces belt slip, vibration

and produces more inertia

due to the extra weight.

DP-4132F

CARBA-TEC ®

PEDESTAL

DRILL PRESS

Extra heavy duty unit. Designed

to stand alone on the floor of the

workshop. Cast iron pulley system

reduces belt slip, vibration and

produces more inertia due to the

extra weight. We think its a very

worthwhile improvement.

DP-4116B

CARBA-TEC ® BENCH

DRILL PRESS

Designed to sit on top of a

short workbench or stand due

to the shorter column. The drill

press is fitted with provision for

a work light between the chuck

and the column (bulb not supplied).

Cast iron pulley system

reduces belt slip, vibration and

produces more inertia due to

the extra weight. We think its a

very worthwhile improvement.

3-16mm chuck incl.

Specifications RDP-116 DP-4116B DP-4116F DP-4119F DP-4132F

Motor 1/2hp 3/4hp 3/4hp 650W 2hp

Speed steps 5 speed 16 speed 16 speed 16 speed 12 speed

Speed range 500-2450rpm 210-3340rpm 210 - 3340rpm 120-3000rpm 150-2700rpm

Chuck capacity 1 to 13mm 3 to 16mm 3 to 16mm 3 to 16mm 3 to 16mm

Quill 55mm 60mm 60mm 65mm 92mm

Chuck/quill travel 80mm 82mm 82mm 82mm 120mm

Chuck to base 1,225mm 520mm 1,135mm 1,135mm 1,110mm

Taper N/A MT2 MT2 MT2 MT4

Tilt type & degree Head 45°L 90°R Fixed Head Fixed Head Fixed Head Fixed Head

Table tilt 360° Table, 360° Table, 360° Table, 360° Table, 360°

Column to drill centre 130-420mm 160mm 160mm 180mm 255mm

Chuck to table max. 700mm 320mm 690mm 680mm 550mm

Work light provision No Yes Yes Yes Yes

Table size 300mm Dia. 305mm dia. 305mm dia. 290x290mm 470x420mm

Base size 240 x 410mm 240 x 410mm 240x410mm 270x440mm 450x580mm

Workshop footprint 360x830x1640mm 340x630x970mm 340x630x1580mm 360x650x1620mm 620x820x1730mm

Drilling capacity 1/2” steel 3/4” steel 3/4” steel 3/4” steel 1-1/4” steel

Shipping/Net weight 65/60kg 57/53kg 66/60kg 86/80kg 148/138kg

Price $359.00 $339.00 $379.00 $469.00 $799.00

Want to see more? See our website for our full range of products. 25


Machinery Accessories

24” TAPER CUTTING JIG

Slides against the fence on any saw bench.

Allows you to accurately cut tapers 0° to 15°.

1kg.

Order no.

Price

7726 $19.00

CARBA-TEC ® TENONING JIG

Simplifies cutting tenons and joints on your

table saw. Fits most saws with a 3/8” x 3/4”

mitre gauge groove, and handles stock up

to 3-1/4” thick.

Order no.

Price

CTJ-183 $109.00

ROCKLER TABLESAW CROSSCUT SLED

No more squinting at those tiny scales —

this Crosscut Sled’s large protractor scale

lets you precisely tune your angles for airtight

miters and crosscuts. Easy-to-read 1/2°

graduations and a hair-line indicator ensure

error-free setups, while a heavy-duty aluminum

fence, adjustable MDF fence face, and

smooth-sliding components delivers versatile

and precise operation.

Order no.

Price

RK-33113 $215.00

SILVERGLIDE DRY SLIP

Mainly used to protect cast iron table tops

from rust. It can also provide lubrication for

highly resinous timbers while machining on

tablesaws and jointers etc.

Order no.

Price

SILVERGLIDE-250 $29.00

SILVERGLIDE-1LTR $69.00

PLANER & JOINTER BLADE SETTING

JIG. (MAGNETIC)

This two piece jig set will help you install

new planer blades in perfect alignment, with

an accuracy of ±.025mm.

Order no.

Price

PSJ-01 $59.00

DELUXE SUVA GUARD SYSTEM

An ideal solution for table saw safety and

dust control. When connected to a dust collection

system, this suva guard captures the

dust thrown up by your table saw blade.

Order no.

Price

DSG-1 $229.00

TAPER/STRAIGHT LINE JIG

If you’ve ever struggled to make a lengthy

angled cut, this is the jig for you. With a

simple indexed angle setting system, heavy

duty hold-down clamps and a smooth sliding

design, it makes tapered cuts fast, easy

and precise. Perfect for chair legs, table legs

and more. Plus, with the miter bar removed

it doubles as a stable straight line ripping jig.

Includes 36” miter bar. Measures 31-5/8’’ x

7-3/4’’. 1/2’’ thick MDF.

Order no.

Price

RK-21597 $95.00

PROTRACTOR AND SAW GUIDE

Features 18° guide bar for precision sawing

and routing. Allows accurate angle cutting.

Order no.

Price

PSG-450 $15.00

SHAPER/ROUTER TABLE SLED

For safer tenoning and copying operations.

This unit firmly clamps your timber for end

grain cutting on router and shaper tables.

Order no.

Price

CTCS-1 $149.00

HEAVY DUTY BIESEMEYER STYLE

TABLESAW FENCE AND RAILS

Offers accuracy and repeatability greatly

enhancing your productivity and craftsmanship.

Order no.

Price

TSC-FENCE $309.00

CARBA-TEC ® UNIVERSAL FOLDING

MITRE SAW STAND

Works with all mitre saws. Lightweight but

strong aluminium construction allows for

easy transport between jobs.

Order no.

Price

CTB-07 $199.00

26

For more information & to shop online go to www.carbatec.com.au


Machinery Accessories

BALL BEARING ROLLERS

These ball bearing roller sets

rotate in any direction, allowing

you free movement of your

stock. Unlike other types of rollers,

these 360° universal transfer

bearings excel when materials

are pushed in any direction.

They mount easily on a piece of

plywood, giving you your own

outfeed table for saws, finishing

tables and assembly lines.

Order no. Size Price

AN-16 16mm $21.00

AN-25 25mm $31.00

HEAVY DUTY SINGLE

ROLLER STAND

Rated to 227kg. Height is adjustable

from 670 to 1100mm.

Post is tapered for strong and

positive locking.

Order no.

Price

CR-2197 $83.00

ROLLER STAND WITH UNIVERSAL CLAMP

A universal clamp allows this roller to be attached to almost any

work surface.

Order no.

Price

S-4401 $62.00

HEAVY DUTY TOOL

STAND

Use this stand to hold your

portable thicknesser or other

bench mounted machine. Stand

includes MDF top and adjustable

feet.

Order no.

Price

PS-330 $79.00

BASIC MODEL ROLLER

STAND

Adjustable in height from 660 to

1000mm. Max. height: 1 metre.

Order no.

Price

JG-300 $31.00

EXPANDING CONVEYOR ROLLERS

This conveyor makes movement of large

workpieces easy. Simply connect the conveyor

to the machine or workpiece area

you’ll be using it with, extend the bed to

the required length and set the brakes.

Next, adjust the height to meet the entry

point required for your workpieces and

you’re ready to go. Assembly adjusts

from 450mm to 1.3m in length and 670 to

940mm in height.

Order no.

Price

HDC-1131 $241.00

UNIVERSAL ROLLER &

BALL STAND

Converts in seconds from roller

stand to ball bearing stand.

Max. height: 1metre. Stand

rated to 95kg

Order no.

Price

S-5008 $73.00

ROLLER STAND WITH 5

ROLLERS

Adjustable in height from 670 to

1100mm. Stand rated to 227kg.

Order no.

Price

CR-3582 $115.00

ROLLER STAND WITH 9 ROLLERS

Height adjustable from 670 x 1100mm and

easily folds up for storage. Both posts are

tapered so locking is positive and strong.

Order no.

Price

CR-5811 Stand $199.00

CR-ROLLER 4 Pack Rollers $29.00

Want to see more? See our website for our full range of products. 27


Machinery Accessories

MOBILE

BASE SET

Set includes corner

brackets, wheels,

castor assembly, foot

pedal and instructions.

Maximum carrying

load 150kg.

Order no.

Price

MB-6 $52.00

CASTOR WITH

BRAKE

Perfect for heavy

machines, with a load

Heavy duty castor

with parking brake

and locking swivel top

. Capacity of 60kg per

castor.

Order no.

Price

CWB-2 $13.00

LARGE FEATHERBOARD

Supplied with an expanding clamping system

for use with 3/4” (19mm) mitre slots for

horizontal use. This clamping system can

be used independently of the featherboard

for setting up customised jigs as well.

Order no.

Price

FBL-2 $16.00

UNIVERSAL MOBILE BASE WITH

227KG CAPACITY

Machine size is no longer an issue as this

mobile base is truly a universal fit. This

base expands from a square of 300mm to

914mm up to 508mm x 1320mm in a rectangular

configuration. Easy assembly.

Order no.

Price

CMB-500 $83.00

UNIVERSAL MOBILE BASE WITH

320KG CAPACITY Extends from 355mm

square or up to 558 x 1370mm in rectangular

configuration. Slotted rails adjust to an

exact fit on your machine. (Not shown)

Order no.

Price

CMB-700 $104.00

ADJUSTABLE FEET

Sold in packs of 4, these adjustable feet are

the perfect addition to utilitarian projects,

machines or as replacements. All are 1”

long.

Order no. Description Price

CAF-35 35mm, 1/4” x 20tpi thread $8.00

CAF-42 42mm, 5/16” x 18tpi thread $10.00

CAF-57 57mm, 5/16” x 18tpi thread $16.00

DIAMOND HONE

400 & 600 grit diamond stones for sharpening

HSS or tungsten carbide jointer and

planer blades without removing blades from

your machine.

Order no.

Price

K-10-D $39.00

VERITAS ® PLANER BLADE SHARPENER

Normally, nicked blades will require a sophisticated

grinder or a trip to a commercial

sharpening service. Veritas’ ® planer blade

sharpener is designed to restore blades

dulled from normal use even if they have

minor nicks. It clamps blades up to 200mm

wide for sharpening on PSA backed abrasives.

Order no.

Price

05M25-01 $79.00

PUSH BLOCKS

An invaluable accessory when passing material

over a rotating cutterhead. Keeps fingers

and hands away from the cutting area

and provides a virtually non-slip grip with its

rubber footing. A necessity for woodworkers

of all skill levels.

Order no.

Price

PB-1 $10.00

EUROPEAN STYLE PUSH STICK

Safety device for router tables and saw

benches. Helps keep your fingers safely

attached to your hand.

Order no.

Price

PS-20 $5.00

ROLLER AND BRACKET

Make your own rolling infeed/outfeed table.

Roller length 400mm, diameter 57mm.

Order no.

Price

CT-874200 $20.00

CARBA-TEC ® METAL DETECTOR

The sensor head has a diameter of 135mm

and will detect most metal objects that will

be a danger to your planer or thicknesser

blades. Overall length is 395mm.

Order no.

Price

MMD-80A $59.00

FIVE PIECE SAFETY KIT

A complete set of safety devices for use with

various machines. Kit includes; pushblocks,

featherboard and 3 push sticks.

Order no.

Price

SK-5PCE $16.00

28

For more information & to shop online go to www.carbatec.com.au


Machinery Accessories

Magswitch Workholding System

REVERSIBLE

FEATHERBOARD

Mounts to the

universal mounting

base and Magjigs.

Is reversible for

left and right hand

feeds. Mounting base and magnets not incl.

Order no.

MAG-0131

VERTICAL

ATTACHMENT

Designed for use

with the MAG-0328,

it aids in providing

steady downward

pressure to your

stock. 200x100x90mm. Mounting base and

magnets not incl.

Order no.

MAG-0178

FEATHERBOARD STARTER KIT

The perfect entry into the Magswitch Workholding

system. Includes Reversible Featherboard attachment,

Universal Mounting Base and two 30mm MagJigs.

Order no.

MAG-0134

Price

$12.00

Price

$15.00

UNIVERSAL

MOUNTING BASE

Allows you to attach

a variety of current

and future Magswitch

attachments.

217x110x20mm. Requires 20 or 30mm

Magjigs.

Order no.

MAG-0112

Price

$15.00

DUAL ROLLER

FENCE

ATTACHMENT

Helps support a

tall panel, hold

down a long piece

of wood and steady your resaw projects.

218x112x26mm.

Order no.

MAG-0130

Price

$75.00

Price

$22.00

30MM PRO TABLE FEATHERBOARD

Fast, easy setup and adjustment. It has 50%

greater holding power than the standard

table featherboard. 172x180x19mm.

Order no.

Price

MAG-0328 $59.00

30MM PRO FENCE FEATHERBOARD

Provides downward pressure on jointer

tables, and steel fences used on router

tables, shaper tables and table saws.

227x70x26mm.

Order no.

Price

MAG-0329 $59.00

UNIVERSAL

TRACK TOOL

ATTACHMENT

Mounts to the

Universal Mounting

Base and Magjigs.

It accommodates

all hardware on the

market. Make your own jigs, fixtures, stops,

fences, zero clearance fences and more.

Mounting base and magnets not incl.

Order no. Description Price

MAG-0132 18”

MAG-0370 36”

$29.00

$53.00

RESAW FENCE ATTACHMENT

This unique ball-bearing based resaw fence

allows wood to flow more smoothly than anything

you have ever tried. 218x112x27mm.

HORIZONTAL

RISERS

Great to use when

working with taller

stock. Install one

level of risers, or

two, to handle taller

work piece more efficiently and safely.

Featherboards shown not included.

Order no.

MAG-0155

Price

$8.00

THIN STOCK HOLD DOWN

Three tools in one! Mounts to the Universal

Mounting Base and Magjigs. Ideal for thin

stock hold down or infeed/outfeed on a table

saw. Enhances safety by keeping your

fingers away from the blade while also minimizing

chatter for clean cuts. Mounting base

and magnets not incl.

UNIVERSAL 20MM FEATHERBOARD

Low profile, double-sided, works to improve

your cutting results on either side of the

blade. 175x100x26mm.

Order no.

Price

MAG-0015 $39.00

30 & 50MM

MAGSQUARES

Use as guides or

positional stops

for workholding.

More versatile than

clamps, faster and

easier to use.

Order no. Description Price

MAG-0054 30mm $39.00

MAG-0106 50mm $169.00

20 & 30MM

MAGJIGS

Use in multiple jigs,

switch in and out off

fixtures with ease.

Works on any steel or

cast iron surface.

Order no.

MAG-0125

Price

$17.00

Order no.

MAG-0362

Price

$19.00

Order no. Description Price

MAG-0004 20mm $23.00

MAG-0005 30mm $32.00

Want to see more? See our website for our full range of products. 29


Machinery Accessories

KREG ®

PRECISION

MITRE GAUGE

SYSTEM

Cut perfect mitres

consistently with our

Precision Mitre Gauge System.

A number of unique features

makes this one of the most

precise mitre gauges on the

market today. Factory calibrated

accuracy starts with a

gauge head that is machined on

a computerized milling machine

for absolute precision. An

easy-to-read Vernier scale enables

precise angle adjustments up to 1/10th of

a degree. Five patented bar adjusters take up

the play in the mitre slot for a perfect fit. A 24”

fence section with patented Flipstop and selfadhesive

measuring tape is included.

• Factory calibrated... perfect right out of the box

• Positive stops at 0, 10, 22-1/2, 30, and 45 degrees

• Brass pin allows quick changes between positive stop angles

• 24” bar that is 3/8” tall x 3/4” wide has 5 bar adjusters eliminates the play between the

bar and the mitre slot

• 24” Fence section with patented Flipstop

Order no. Description Price

KR-KMS7102 Precision Mitre Gauge System

$199.00

KR-KMS7101 Precision Mitre Gauge

$135.00

KR-KMS7103 Precision Mitre Gauge Fence

$99.00

KREG ® TRUE-FLEX TM FEATHERBOARD

Designed so that each finger will provide

consistent and optimum pressure, this featherboard

is made from an extremely durable

plastic composite body and even includes an

exclusive wedge-lock system which allows

the featherboard to be secured to a variety

of shop tools without the need for additional

hardware. Available in single or twin pack.

Single featherboard comes with wedge-lock

hardware which works in t-slots or mitre slots

on tablesaws, router tables, band saws and

more. The twin pack comes as an extended

version for use in tandom. When used together

they provide additional support for

taller workpieces resulting in faster, safer and

higher quality cuts.

Order no.

Price

KR-PRS3010 Single $25.00

KR-PRS3020 Twin Pack $45.00

KREG ® MITRE ATTACHMENT

Easily attached to a swing Stop TM or Production

Stop, the Mitre Attachment supports the

mitred end of the board on two surfaces to

make a more accurate cut.

Order no.

Price

KR-KMS7831 $25.00

KREG ®

PRODUCTION STOP

Features dual lens cursors and the unique

ability to be moved to either side of the saw.

Order no.

Price

KR-KMS7800 $25.00

KREG ® MULTI-PURPOSE PRO PUSH

STICK Adds true speed and convenience

to every cut you make! Well balanced heavy

duty impact resistant.

Order no.

Price

KR-KMA1000 $19.00

KREG ® PRECISION TRAK & STOP

MEASURING SYSTEM

Designed to take the guesswork out of

cutting wood to length. Kit contains 8’ (4x2’

sections) of anodised aluminium trak.

Order no.

Price

KR-KMS8000 $179.00

KREG ® SWING STOP

Uniquely designed to swing out of the way

when workpieces are pressed into its face.

Order no.

Price

KR-KMS7801 $39.00

KREG ® MAGNETIC DRAWER SLIDE

MOUNTING TOOL

The strong, rare earth magnets hold most

types of metallic drawer slides in place freeing

your hands for the rest of the job.

Order no.

Price

KR-NZ03 $39.00

30

For more information & to shop online go to www.carbatec.com.au


Machinery Accessories

ZERUST ® ICT ®

VAPOUR

CAPSULES

These capsules

emit powerful corrosion

inhibiting molecules

into an enclosure

that settle on metal surfaces and

protect them from corrosion.

Order no.

Price

ZE-VC2-1 $15.00

A. B.

KREG ® PRECISION BANDSAW FENCE

Introduce a new level of accuracy to your band saw with our Precision

Band Saw Fence. We’ve designed this fence with noted

band saw expert Mark Duginske to produce an unprecedented

level of rigidity, adjustability, and precision. The fence is adjustable

in two dimensions for ease in setting it parallel to the blade.

Cutting accuracy and repeatability is further enhanced by the

precision lens cursor that reads off the included scale. Mounts

to most 14 inch band saws including CARBA-TEC ® , Delta, Jet,

and many others. Available with an optional Micro-Adjuster and

Resaw Guide that allows drift angle adjustments to made while

cutting.

Order no. Description Price

KR-KMS7200 A. Precision Bandsaw Fence $149.00

KR-KMS7213 B. 4.5” Resaw Guide $23.00

KR-KMS7214 C. 7” Resaw Guide $26.00

KR-KMS7215 D. Micro Adjuster $19.00

C.

D.

PROFESSIONAL RIP FENCE

“A stable and accurate enhancement to your

14” bandsaw. Fits most 14” machines”

Order no.

Price

RF-3 $99.00

KREG ® DRAWER SLIDE MOUNTING

BRACKETS

For both face-frame and faceless cabinets,

aligning the drawer box to full-extension

slides are simple with this tool.

Order no.

Price

KR-NZ03-B $13.00

KREG ® PRECISION ROUTER TABLE

INSERT PLATE

This rugged 3/8” phenolic plate was designed

to accept nearly any router, without

the use of a “swiss-cheese” style pre-drilled

surface.

Order no.

Price

KR-PRS3030 $79.00

ROUTER TABLE INSERT KIT

228 x 305mm approx. Ideal for making

your own router table at home. Made from

Bakelite and adaptable to accept most common

routers.

Order no.

Price

RTS-1 $35.00

GUIDE BLOCKS WITH

ROLLER BEARINGS

(SET OF FOUR)

Enables more accurate,

straighter cuts than

standard blocks. Suits any

bandsaw that accepts 1/2” x 1/2”

guide blocks.

Order no.

Price

AB-199021 $35.00

PRECISION

ROUTER

TABLE

INSERT

PLATE LEVELERS

These unique levelers

are the easiest way to

add an insert plate to your shop-built router

table.

Order no.

Price

KR-PRS3040 $25.00

Bottom Guide

Top Guide

DELUXE 14” BLADE GUIDE SET

The addition of this fully featured top and

bottom industrial style guide system will

enhance the accuracy of your bandsaw

beyond measure.

Order no.

Price

SW-1401-GUIDE $85.00

BLADE BRAZING JIG

For blades 1/16” to 1-1/4”. Brazed joints are

stronger than the base metal of the original

blade. This jig is used to repair broken bandsaw

blades quickly, easily and inexpensively.

Kit includes: brazing jig, flux, brush, silver alloy

and instructions. A separate butane torch

is required to use this brazing kit. Our professional

mini butane torch is perfect for the

job and also for any small brazing jobs such

as in jewellery making/ repairing etc. Operating

temp. - 1300˚C. Torch is supplied without

fuel. Note: Can be used to weld most metals

except aluminium.

Order no. Description Price

CT-BBJ Brazing Kit $35.00

MT-790 Butane Torch $35.00

Want to see more? See our website for our full range of products. 31


Machinery Accessories

CARBA-TEC ® STANDARD MITRE

GAUGE

Fits most cast table machinery with 3/4” x

3/8” mitre slots, or any of our 3/4” x 3/8”

mitre tracks.

Order no.

Price

MGT-01 $29.00

INCRA MITRE V27

Is engineered to provide high performance.

It’s no-nonsense design and compact size

make it the most affordable Incra mitre

gauge ever.

Order no.

Price

IN-MITERV27 $79.00

INCRA MITRE V120

Puts high resolution, repeatability and accuracy

within the budget or all woodworkers.

An incredible 120 angle stops are laser cut

into the steel protractor.

Order no.

Price

IN-MITERV120 $109.00

INCRA 1000HD MITER GAUGE

Combine a high-resolution protractor with

the industry’s smoothest adjustable miter

bar, a telescoping IncraLOCK Cut-off Fence

& Flip Shop Stop, and a steel vernier scale

that reads to 1/10° and you’ve got a winner

that will improve the quality of any project.

Order no.

Price

IN-MITER1000HD $239.00

DELUXE ALIGNMENT SYSTEM

Check table saw alignment, arbor shaft

run-out, blade and flange run-out and fence

alignment and straightness.

Order no.

Price

DAS-1 $105.00

4 5 6 8 12

VERITAS ® POLY GAUGE

This gauge, which is accurate to 1/2° on

every angle, can be used for many different

machines. Used flat, the gauge is ideal for

setting mitre fences or for layout work. Used

vertically, the slotted knob becomes a stabilising

base that holds the gauge erect so that

you have both hands free for adjusting and

locking a fence or blade. Ideal for frames,

tubs and planters, glued up cylinders for

turning, any job that requires precise setting

for 4, 5, 6, 8 or 12 sided mitres. Made from

brass and hardened aluminium, the gauge

measures 8-1/2” x 6” overall.

Order no.

Price

05N14-01 $49.00

MORTISE CHISEL SHARPENING KIT

Sharpens the inside of square chisels with a

6 flute HSS cutter. After sharpening the four

outside faces, the chisel should be deburred

using the flat diamond stone supplied. There

is no other successful way to sharpen this

type of chisel. An essential accessory for

all chisel mortisers. Suit 1/4”, 3/8” and 1/2”

chisels.

Order no.

Price

MCS-01 $59.00

CARBA-TEC ® 1/4HP JUNIOR

POWERFEED

This lightweight unit is nevertheless powerful

enough to feed stock into circular saws,

spindle moulders, sanders, routers and planers,

etc. The three rubber roller head can be

articulated vertically or horizontally to suit almost

any feeding job. Four feed speeds 5,

6.5, 8 and 11m/min are possible and give

this machine the versatility needed in almost

any home or small workshop. Motor is fitted

with forward and reverse switch. This power

feed will promote productivity in your shop

and provides added safety as well.

Specifications

Column Diameter

Max. Capacity under rollers

Reach

Roller Size

50mm

127mm

247mm

77mm

Order no.

Price

AF-32 $695.00

CARBA-TEC ® 1/2HP CABINETMAKERS

POWERFEED

This heavy duty unit has many characteristics

that enable it to feed stock into circular

saws, spindle moulders, sanders, routers

and planers, etc. With its high capacity for

holding, the three rubber rollers are suitable

for large workpieces. The three rubber roller

head can be articulated vertically or horizontally

to suit almost any feeding job. Four feed

speeds are possible 5.8, 9, 15 and 23m/

min, approx. only) and give this machine the

versatility needed in almost any professional

workshop. Motor fitted with forward/reverse

switch. This unit will promote productivity

and provide added safety too.

Specifications

Column Diameter

Max. Capacity under rollers

Reach

Roller Size

50mm

177mm

406mm

100mm

Order no.

Price

AF-308 $1,095.00

32

For more information & to shop online go to www.carbatec.com.au


Machinery Accessories

OPTIONAL MOUNTING BRACKET

For mounting your power feed unit to almost

any spindle moulder. Unit fits onto tables

using clamping bracket and bolts.

Order no.

Price

CTUB-1 $85.00

5 PIECE MORTISE CHISEL SET

Set includes 1/4”, 5/16”, 3/8”, 1/2” and 5/8”

chisels with auger bits to suit. Chisels fit 3/4”

bushed machines. 1.17g.

Order no.

Price

MCS-5 $32.00

DIGITAL HEIGHT GAUGE

This economically priced gauge is the perfect

addition to your machine setup kit. Used

primarily on router tables and tablesaws, this

gauge can also be used horizontally when

positioning a fence as well. The LCD screen

reports measurements in metric, imperial

and fractional inches all at the touch of a

button. Measurement resolution as follows:

0.05mm, 0.002” and 1/32” (±0.1mm/0.004”).

The nylon body houses rare earth magnets in

the feet when used vertically, allowing near

hands free setup of equipment. Button cell

battery included.

Order no.

Price

RHG-1 $29.00

MULTI-STOP

A quick release

positioner that attaches

to fences,

tables and work

pieces to make

routing, shaping or sawing more accurate

and less time consuming.

Order no.

Price

CT-MS2 $17.00

DRILL PRESS WORK SUPPORT

STAND WITH ROLLERS

Two roller stand style rollers, 450mm wide

are fully adjustable, for height and width giving

maximum versatility.

Order no.

Price

DP-1353 $59.00

DRILL PRESS TABLE

This accessory effectively expands the work

area for your drill press allowing you to work

with larger projects on small tables. Drill

press not included.

Order no.

Price

DPT-1 $99.00

CHISEL MORTISE KIT FOR DRILL

PRESSES

Drill square holes for mortise and tenon

joints. Kit will suit the following quill sizes; 40,

48, 55, 60 and 66mm. Kit includes 5 piece

chisel set (MCS-5).

Order no.

Price

MAS-2-KIT $99.00

Optional square chisels for mortising

WMC-14 1/4” $15.00

WMC-38 3/8” $15.00

WMC-12 1/2” $15.00

WMC-58 5/8” $22.00

WMC-34 3/4” $29.00

POLYCARBONATE SHEETS

Perfect for making custom transparent base

plates, safety shields, templates, jigs, and

other accessories for your workshop.

Order no. Size Price

46J86-12 1/4” $22.00

46J86-13 3/8” $34.00

UHMW POLYETHYLENE

This is a type of plastic that is dense, tough,

rigid, impervious to moisture and most important,

has a very low coefficient of friction.

Order no. Size Price

46J90-15 3/8”, 3/4”x24” $7.50

46J90-10 1/4”, 4”x24” $14.00

46J90-11 3/8”, 4”x24” $19.00

46J90-12 1/2”, 4”x24” $32.00

46J90-14 3/4”, 4”x24” $39.00

T-TRACK INTERSECTION KIT

Slide your jigs and fixtures in almost any direction!

- Used with our 3/4” wide aluminium T-track,

this 4-piece kit allows you to make the T-

track intersection you need.

Order no.

Price

RK-22209 $29.00

Want to see more? See our website for our full range of products. 33


Machinery Accessories

A.

B. C. D. E. F. G.

KREG ADHESIVE TAPES

This 1/2” wide, 3.5m long, self-adhesive measuring tape fits snugly

into the indentation on the topside of our Top Trak and Heavy Duty

Trak. Choose the correct tape orientation left-to-right reading to the

right of the saw blade, right-to-left reading to the left of the saw blade.

Metallic tape is highly scuff resistant and can be trimmed to length.

Order no. Description Price

A. KR-KMS7511 Kreg Trak Clamp

B. KR-KMS7507 Kreg Mini Trak 24”

B. KR-KMS7508 Kreg Mini Trak 36”

B. KR-KMS7509 Kreg Mini Trak 48”

C. KR-KMS7303 Kreg Jig & Fixture Bar

D. KR-KMS7432 Kreg Combo-Trak 32”

D. KR-KMS7448 Kreg Combo-Trak 48”

E. KR-KMS7712 Kreg Top Trak 24”

E. KR-KMS7714 Kreg Top Trak 48”

F. KR-KMS7702 Kreg Heavy Duty Trak 2”

F. KR-KMS7704 Kreg Heavy Duty Trak 4”

G. KR-KKS1020 Kreg Klamp Trak 33-3/4”

$7.00

$15.00

$19.00

$24.00

$29.00

$39.00

$49.00

$29.00

$45.00

$49.00

$75.00

$59.00

Order no. Description Price

KR-KMS7728 R to L $12.00

KR-KMS7729 L to R $12.00

ROCKLER 915MM MULTI TRACKS FOR

JIGS AND CUSTOM FENCES

With Universal T-Tracks on every face, these

36” tracks are full of potential - use them to

create custom fences, jigs and fixtures. Once

assembled, the multiple tracks give you

countless options for attaching stops, holddowns,

sub-fences and more. Available in

2-1/4” and 3” heights.

Order no. Description Price

RK-35605 2-1/4” $45.00

RK-34262 3” $59.00

I.

A.

A.

F.

F.

H.

I.

H.

G.

Order no. Description Price

A. 12K79-22 1/4” T-slot x 2

$15.00

A. 12K79-24 1/4” T-slot x 3

$22.00

A. 12K79-28 1/4” T-slot x 4

$28.00

B. 05J21-15 1/4”-20 T-slot nuts (10 pack) $5.00

C. 12K79-70 1/4”-20 x 1” T-bolts (10 pack) $5.00

D. 12K79-72 1/4”-20 x 2” T-bolts (10 pack) $7.00

E. 12K79-80 Hex Bolt Washers (10)

$8.00

12K79-32 5/16 T-slot x 2

$20.00

12K79-34 5/16 T-slot x 3

$29.00

12K79-38 B. C. 5/16 D. T-slot x 4

$38.00

12K79-60 5/16-18x1” T-slot nuts (10) $9.00

12K79-62 5/16-18x1” T-bolts (10)

$7.00

12K79-64 5/16-18x2” T-bolts (10) $12.00

VERITAS 12K79-66 TM T-SLOT TRACKS Hex Bolt Washers (10)

$8.00

F. 12K79-42 2” Double T-slot

$16.00

F. 12K79-44 3” Double T-slot

$23.00

G. 16J60-80 Undercut Slotting Bit

$29.00

H. 12K79-06 2x3/4” Slot Extrusion ea. $19.00

H. 12K79-07 3x3/4” Slot Extrusion ea. $35.00

I. 46J90-15 3/8” UHMW, 3/4” x 24”

$7.50

VERITAS TM BENCH BOLTS

Bolts are 6” long and 1/2” in diameter.

The nuts are 25x25mm and will fit perfectly

into a 1” hole.

Order no.

Price

05G07-02 $45.00

ROCKLER MULTI TRACK BRACKETS

Combine your Multi Tracks with these extruded aluminium brackets

to form L-shaped fences. Center slots accept T-bolts (not included)

to connect Multi Tracks to any built-in T-Track. Includes two brackets,

eight 1/4’’-20 bolts, eight washers, and eight T-Track nuts to secure

brackets to Multi Tracks (35605, 34262). Available in 50mm x 50.8mm

and 32mm x 50.8mm sizes.

Order no. Description Price

RK-33338 32mm $25.00

RK-35961 50mm $25.00

18” MITRE BAR

Use these handy mitre bars to aid the

sliding action of custom jigs and fixtures.

Nylon set screws allow perfect adjustment

in 3/4” x 3/8” mitre gauge slots.

Order no.

Price

CYH-987 $21.00

32” MITRE TRACK

Accepts any standard mitre

gauges and mitre bars at 3/4”

wide and is easily installed into

home-made router tables, jigs and

other similar devices.

Order no.

Price

ALMG32 $27.00

34

For more information & to shop online go to www.carbatec.com.au


Machinery Accessories

A.

R.

V.

J.

DD.

K.

B.

W.

C.

S.

M.

L.

D.

T.

CC.

JIGS & FIXTURES HARDWARE

The taper handle and ball, clamping, sure-grip, four-arm, wing

and bar knobs are all made from durable plastics, the jig handle,

wing nuts and thumbscrews are made from malleable iron

for extended service.

O.

N.

BB.

X.

E.

Y.

F.

U.

P.

Z.

AA.

Q.

H.

G.

Order no. Price

Description

1/4”-20tpi

A 1” dia, Ball Head Knob (F), ea. 00M55-01 $3.00

B 1-1/4” dia. Ball Head Knob (M), ea. 00M55-05 $5.00

C 3-7/8” Handle (F), ea. 00M53-01 $8.00

D 3-7/8” Handle (M), ea. 00M53-02 $15.00

E 1” Clamping Knob (F), ea. 00M56-20 $3.00

F 1” Clamping Knob (M), ea. 00M56-21 $3.00

G 1-3/4” Clamping Knob (F), ea. 00M56-10 $4.00

H 1-3/4” Clamping Knob (M), ea. 00M56-11 $5.00

J. 1-1/2” Sure-Grip (F), ea. 00M55-20 $4.00

K. 1-1/2” Sure-Grip (M), ea. 00M55-21 $4.00

L. 1-1/2” Four-Arm Knob (F), ea. 00M55-30 $6.00

M. 1-1/2” Four-Arm Knob, (M), ea. 00M55-31 $4.00

N. 1-1/8” Wing Knob (F), ea. 00M51-01 $3.00

O. 1-1/8” Wing Knob (M), ea. 00M51-02 $3.00

P. 1-1/2” Wing Knob (F), ea.

Q. 1-1/2” Wing Knob (M), ea.

R. 2” Wing Knob (F), ea. 00M52-01 $5.00

S. 2” Wing Knob (M), ea. 00M52-02 $5.00

T. 2” Bar Knob (F), ea. 00M55-10 $8.00

U. 2” Bar Knob (M), ea. 00M55-11 $5.00

V. 2” Four-Arm Knob (F), ea. 00M55-40 $5.00

W. 2-1/4” Pentagon Knob (F), ea. 00M50-01 $3.00

X. 1-1/2” Rose Knob, ea. 00M40-01 $2.00

Y. Knurled Knobs (4)* 00M40-02 $2.50

Z. 1-1/4” T-Knobs (4) 00M40-03 $2.50

AA. Nylon Washers (10) 00M40-23 $2.50

BB. Jig Handle 00N36-01 $7.00

CC. Wing Nut, ea. 00M54-01 $3.50

DD. 1/2” Thumbscrew, ea. 00N35-02 $9.00

3/4” Thumbscrew, ea. 00N35-03 $8.80

1” Thumbscrew, ea. 00N35-04 $9.00

1-1/2” Thumbscrew, ea. 00N35-06 $9.50

Order no. Price

5/16”-18tpi

00M77-01 $3.00

00M75-05 $5.00

00M73-01 $8.00

00M73-02 $15.00

00M76-20 $3.00

00M76-21 $3.00

00M76-10 $4.00

00M76-11 $5.00

00M75-20 $4.00

00M75-21 $4.00

00M75-30 $6.00

00M75-31 $4.00

00M71-01 $4.00

00M71-02 $3.50

00M72-01 $5.00

00M72-02 $5.00

00M75-10 $8.00

00M75-11 $5.00

00M75-40 $5.00

00M70-01 $3.00

00M60-01 $2.00

00M60-02 $2.50

00M60-03 $2.50

00M60-23 $2.50

00N56-01 $7.00

00M74-01 $3.50

00N55-02 $9.00

00N55-03 $8.80

00N55-04 $9.00

00N55-06 $9.50

T-NUTS & PROPELL NUTS

Available with 3, 4 or 6 prongs, each with its own advantages. Generally, 3 prong are used for plywood, 4

prong nuts are hard or soft wood, and 6 prong nuts for softer materials and composites. Sold in bags of 10.

A. B.

Description Order no. Price

Order no.

Price

Order no.

Price

1/4”-20 Thread

A. 3-prong T-Nuts (10) 00N22-03 $1.50

B. 4-prong T-Nuts (10) 00N22-04 $1.50

C. 6-prong T-Nuts (10) 00N22-06 $1.50

D. Propell Nuts (10) 00N23-01 $2.40

5/16”-18 Thread

00N52-03 $2.00

00N52-04 $2.00

-

00N32-01 $3.00

3/8”-16 Thread

00N22-23 $2.20

00N22-24 $2.20

00N22-26 $2.20

00N23-02 $3.80

C. D.

HANGER BOLTS 1/4”-20 THREAD

Description Order no. Price

A. 1” Bolts (10) 01Z02-01 $1.50

B. 1-1/2” Bolts (10) 01Z02-15 $1.60

C. 2” Bolts (10) 01Z02-20 $1.70

D. 2-1/2” Bolts (10) 01Z02-25 $1.80

E. 1-1/2” Insert Bolts (10) 00M93-01 $9.00

A.

B.

C.

D.

E.

BRASS NUTS, BOLTS & INSERTS

Description Order no. Price

Order no. Price

1/4”-20 Thread

A. 1” RH Bolts (10) 44Z08-03 $6.00

1” RH Bolts (25) 44Z08-01 $12.00

B. 1” FH Bolts (10) 44Z08-04 $6.00

1” FH Bolts (25) 44Z08-02 $12.00

C. 2” RH Bolts (10) 44Z09-03 $11.00

2” RH Bolts (25) 44Z09-01 $20.00

D. 2” FH Bolts (10) 44Z09-04 $11.00

2” FH Bolts (25) 44Z09-02 $20.00

E. Knurled Screw ea. 00M91-01 $6.00

F. Insert Nuts (10) 00M90-01 $14.00

G. Speed Nuts (4) 05F01-03 $16.00

H. 24” Rod ea. 05F01-04 $5.00

5/16”-18 Thread

44Z08-13 $10.00

44Z08-11 $25.00

44Z08-14 $10.00

44Z08-12 $25.00

44Z09-13 $17.00

44Z09-11 $40.00

44Z09-14 $17.00

44Z09-12 $40.00

00M95-01 $6.00

00M94-01 $14.00

12K79-81 $5.00

H.

A. B. C. D.

E.

F.

G.

Want to see more? See our website for our full range of products. 35


Machinery Accessories

A.

B.

BELT/DISC CLEANING STICKS

Order no. Size Price

BELT-CLEANER-M 32x32x200mm $7.00

BELT-CLEANER-L 50x50x200mm $12.00

1/4” & 5/16” 149 PIECE HARDWARE

FITTING KITS

Get all the components that you need in this

master kit of jig and fixture fittings. Available

in 1/4” and 5/16” thread configurations.

Kits Includes: 20 x 1” T-Bolts, 10 x 2-1/2”

T-Bolts, 20 x 1-1/2” T-Bolts, 10 x 3-1/2”

T-Bolts, 16 x T-Nuts, 10 x 1” Round Insert

Knobs, 6 x 2” T-Insert Knobs, 6 x Four Wing

Bolt Knobs, 4 x Five Wing Bolt Knobs, 6 x

Four Wing Insert Knobs, 4 x Five Wing Insert

Knobs, 16 x Threaded Inserts, 20 x Washers.

Order no. Description Price

00H21-49 1/4” kit $69.00

00H31-49 5/16” kit $69.00

INCRA ® BUILD-IT SYSTEM

STARTER KIT

Your new Incra ® Build-It System Starter Kit

provides all of the Build-It System components

you’ll need to produce many different

beneficial jigs! Kit includes all of the Build-It

System Components you’ll need to produce

all of the beneficial jigs and more. Just connect

the parts!

Order no.

Price

IN-BKITSTART $152.00

SMALL & LARGE DELUXE HOLD

DOWN CLAMPS Made from anodised aluminium.

Designed to fit into a 1/4” or 5/16”

t-track. Ideal for router tables or jigs.

Order no. Description Price

CYH-912 Small, holds 75x85mm, ea. $8.00

CYH-283 Large, holds 90x70mm, ea. $10.00

CAM CLAMP MECHANISM

This cam clamp can exert as much as 400lb

of force using only a thumb and forefinger

to operate the handle.

Order no. Description Price

A. 05J51-01 1/4-20 $7.00

B. 05J51-05 5/16”-18 $7.00

FENCE CLAMP (Pair)

These allow you to use auxiliary fences in

conjunction with your existing fences without

the clamps getting in the way.

Order no.

Price

CYH-373 $20.00

A.

C.

GOOD HAND TOGGLE CLAMPS

Order no.

Hold

Cap.

Length

Clamp

Cap.

B.

Price

A. Horizontal Handled Toggle Clamps

GH-200W 400kg 240mm 57mm $18.00

GH-225D 227kg 173mm 37mm $15.00

GH-201C 100kg 143mm 25mm $13.00

GH-20400 20kg 66mm 10mm $13.00

B. Push/Pull Toggle Clamp

GH-302F 136kg 137mm 32mm $20.00

C. Vertical Handled Toggle Clamps

GH-101EL 360kg 145mm 50mm $20.00

GH-11401 100kg 70mm 22mm $13.00

GH-12050 91kg 65mm 25mm $13.00

GH-101A 50kg 50mm 17mm $12.00

SLEEVELESS

DRUM SAND-

ING SET

Set includes

1”x3”, 2-1/2” x

3”, 2”x3”, 3”x3”

drums. Also

included are two

1/2” and two 1/4”

drive shafts. For use in drill press only.

Order no.

Price

DRUM-SET-4 $69.00

20 PIECE LONG SERIES SANDING

SET Set includes: 1/2”, 3/4”, 1” and 1-1/2”

diameter spindles. All spindles are 2-1/2”

long. Two 80 and 120 grit sanding sleeves

are included for each drum.

Order no. Desc. Price

DRUM-20L Sanding Set $25.00

DRUM-20LS Rep. sleeves $11.00

20 PIECE

MID LENGTH

SANDING

SET (BOXED)

Diameter: 1/2”,

3/4”, 1”, 1-1/2”

Length: 2”, 2”,

2”, 2”

Order no.

Price

DRUM-SET-20 $22.00

PNEUMATIC

DRUM SLEEVE

SANDER

110x150mm with

5/8” x 11tpi LH female

thread, suits

left end of most

modern 8” bench grinders. Includes sanding

sleeve.

Order no.

Price

A5-455 $69.00

CLOTH BACKED

SANDING KIT

Kit contains 4 rolls of

25mm x 6m with the

following grits: 150,

240, 320 and 400.

Order no.

Price

SPS95-01 $22.00

36

For more information & to shop online go to www.carbatec.com.au


Machinery Accessories

REPLACEMENT BELTS

Order no. Length(mm) Grit Price

TO SUIT SB-609 & SBD-6012QC

SB-1220-60 150 x 1220 60 $18.00

SB-1220-80 150 x 1220 80 $18.00

SB-1220-120 150 x 1220 120 $18.00

SB-1220-180 150 x 1220 180 $18.00

SB-1220-240 150 x 1220 240 $18.00

SB-1220-320 150 x 1220 320 $18.00

TO SUIT BB-80S

SB-2260-60 150 x 2260 60 $26.00

SB-2260-80 150 x 2260 80 $26.00

SB-2260-120 150 x 2260 120 $26.00

SB-2260-180 150 x 2260 180 $26.00

SB-2260-240 150 x 2260 240 $26.00

SB-2260-320 150 x 2260 320 $26.00

TO SUIT BDS-48

SB-915-60 100 x 915 60 $10.00

SB-915-80 100 x 915 80 $10.00

SB-915-120 100 x 915 120 $10.00

SB-915-180 100 x 915 180 $10.00

SB-915-240 100 x 915 240 $10.00

SB-915-320 100 x 915 320 $10.00

TO SUIT OBS-6108

SB-2743-60 150 x 2743 60 $32.00

SB-2743-80 150 x 2743 80 $32.00

SB-2743-120 150 x 2743 120 $32.00

SB-2743-180 150 x 2743 180 $32.00

SB-2743-240 150 x 2743 240 $32.00

SB-2743-320 150 x 2743 320 $32.00

GRAPHIC SLIP CLOTH

Graphite slip cloth is glued to the platen on

sanding machines greatly reducing the friction

between the back of the moving paper

and the platen. This has the effect of greatly

increasing the usable HP of the machine.

Order no. Width Price

GRAPHITE-100MM 100mm $19.00

GRAPHITE-150MM 150mm $29.00

REPLACEMENT VELCRO STYLE

HOOK & LOOP DISCS

Order no. Style Grit Price

6” Hook & Loop Sanding Discs

SD-6-60 Hook & Loop 60 $2.50

SD-6-80 Hook & Loop 80 $2.50

SD-6-120 Hook & Loop 120 $2.50

SD-6-180 Hook & Loop 180 $2.50

SD-6-240 Hook & Loop 240 $2.50

SD-6-320 Hook & Loop 320 $2.50

TO SUIT DE-31-340

SD-8-60 Hook & Loop 60 $3.50

SD-8-80 Hook & Loop 80 $3.50

SD-8-120 Hook & Loop 120 $3.50

SD-8-180 Hook & Loop 180 $3.50

SD-8-240 Hook & Loop 240 $3.50

SD-8-320 Hook & Loop 320 $3.50

TO SUIT SB-609

SD-9-60 Hook & Loop 60 $6.00

SD-9-80 Hook & Loop 80 $6.00

SD-9-120 Hook & Loop 120 $6.00

SD-9-180 Hook & Loop 180 $6.00

SD-9-240 Hook & Loop 240 $6.00

SD-9-320 Hook & Loop 320 $6.00

TO SUIT OBS-6108

SD-12-60 Hook & Loop 60 $8.00

SD-12-80 Hook & Loop 80 $8.00

SD-12-120 Hook & Loop 120 $8.00

SD-12-180 Hook & Loop 180 $8.00

SD-12-240 Hook & Loop 240 $8.00

SD-12-320 Hook & Loop 320 $8.00

HOOK & LOOP VELCRO STYLE

BACKING PAD WITH SELF ADHESIVE

BACK (each kit includes 1x120 grit disc)

Order no. Style Price

SDS-6-KIT 6” H & L Starter Kit $12.00

SDS-8-KIT 8” H & L Starter Kit $20.00

SDS-9-KIT 9” H & L Starter Kit $25.00

SDS-12-KIT 12” H & L Starter Kit $33.00

SDS-20-KIT 20” H & L Starter Kit $129.00

COLOUR CODED SANDPAPER

DESIGNED FOR EASY IDENTIFICATION

Order no. Length(mm) Grit Price

SPR-RED-80 300mmx2m 80 $18.00

SPR-WHITE-120 300mmx2m 120 $18.00

SPR-YELLOW-180 300mmx2m 180 $18.00

SPR-BLUE-240 300mmx2m 240 $18.00

SPR-ORANGE-320 300mmx2m 320 $18.00

SPR-GREEN-400 300mmx2m 400 $18.00

CLOTH BACKED SANDPAPER

Order no. Type Grit Price

SP-4-80 4” Flex Cloth 80 $5.50

SP-4-120 4” Flex Cloth 120 $5.50

SP-4-180 4” Flex Cloth 180 $5.50

SP-4-240 4” Flex Cloth 240 $5.50

SP-4-320 4” Flex Cloth 320 $5.50

SP-4-400 4” Flex Cloth 400 $5.50

VELCRO SANDSHEET

Order no. Size Grit Price

SSV-80 115 x 230 80 $1.50

SSV-120 115 x 230 120 $1.50

SSV-180 115 x 230 180 $1.50

SSV-240 115 x 230 240 $1.50

SSV-320 115 x 230 320 $1.50

SSV-400 115 x 230 400 $1.50

WET & DRY PAPER

Order no. Type Grit Price

WD-600 W/proof Abrasive 600 $1.50

WD-800 W/proof Abrasive 800 $1.50

WD-1200 W/proof Abrasive 1200 $1.50

WD-2000 W/proof Abrasive 2000 $1.50

ABRASIVE

SANDING BLOCKS

Approx. size

80x45x20mm. These

blocks are solid abrasive

in a rubberised

compound. The abrasive never wears out

until the whole block is worn away.

Order no. Grit Price

RAB-060 60 grit $7.00

RAB-120 120 grit $7.00

Want to see more? See our website for our full range of products. 37


Woodturning & Accessories

CARBA-TEC ® ECONOMY MINI LATHE

A small, well priced lathe with five spindle speeds. The headstock,

bed and tailstock are constructed of cast iron and the 375W induction

motor has more than enough power for the type of projects likely

to be produced on a lathe of this size. Comes complete with drive

centre, revolving tailstock centre, and 80mm diameter faceplate

Specifications

Motor

1/2hp, 240v

Swing over bed capacity

260mm

Max. distance between centres

440mm

Spindle thread

M30x3.5

Hole through tailstock

10mm

Spindle RPM 5 speed-500 to 3,200

Morse taper

MT2

Shipping/Net Weight

35/33kg

Order no.

Price

MC1018 $279.00

WOODFAST WM-305 MIDI LATHE

Full, heavy cast iron construction provides heft and minimises vibration.

The belt cover is easily removed for belt and pulley adjustments.

A mechanical catch holds the cover in place.

Specifications

Motor

1/2hp, 240v

Swing over bed capacity

300mm

Max. distance between centres

420mm

Spindle thread

M30x3.5

Hole through tailstock

10mm

Spindle RPM 6 speed-360 to 3,250

Indexing positions 12

Morse taper

MT2

Shipping/Net Weight

52/48kg

Order no. Description Price

WM-305 Woodfast Midi Lathe $399.00

WBE-25 Bed Extension $79.00

WMLS-36 Floor Stand $119.00

WSE-24 Stand Extension $79.00

CARBA-TEC ® VARIABLE SPEED MINI LATHE

Quick to lock control levers easily position tool-rest, stable cast-iron

frame, head and tailstock to reduce chatter and vibration for smoother

turning. 3 variable speed ranges; 250-800, 550-1700 & 1200-3600.

Specifications

Motor

3/4hp, 240v, 550W

Swing over bed capacity

355mm

Bed length

430mm

Spindle thread

M30x3.5

Hole through tailstock

10mm

Spindle RPM Variable -250-3600

Indexing positions 24

Morse taper

MT2

Shipping/Net Weight

46/42.5kg

Order no.

Price

CT-70-1000 $799.00

CARBA-TEC ® WOODLATHE

Headstock locks in four positions for outboard turning, cast iron

bed, hollow headstock with No.2 MT & M30 x 3.5 spindle, inc. stand,

300mm tool rest, face plate, drive centre revolving centre and hollow

tailstock with No. 2 MT.

Specifications

Motor

3/4hp, 240v, 550W

Swing over bed capacity

300mm

Bed length

900mm

Spindle thread

M30x3.5

Hole through tailstock

10mm

Spindle RPM Variable -500-2000

Morse taper

MT2

Headstock movement Swivels 360°

Workshop Footprint

1620x400x1120mm

Shipping/Net Weight

85/80kg

Order no. Description Price

MC900 Carba-Tec ® Woodlathe $469.00

MCLEG Cast Iron Legs $149.00

MCREST 3-Point Steady Rest $49.00

38 For more information & to shop online go to www.carbatec.com.au


Woodturning & Accessories

CARBA-TEC ® WOODLATHE

Headstock rotates 360° and locks in four positions for outboard

turning. Cast iron bed, hollow headstock with No.2 MT & M30 x 3.5

spindle. This great new lathe includes cast iron stand with tool tray,

300mm tool rest with 2 piece articulated banjo, face plate, drive

centre, revolving centre and hollow tailstock with No. 2 MT. Variable

speeds between 500 - 2000 rpm.

Specifications

Motor

1-1/2hp, 240v

Swing over bed capacity

410mm

Bed length

1130mm

Spindle thread

M30x3.5

Hole through tailstock

15mm

Spindle RPM Variable - 500 to 2000

Morse taper

MT2

Headstock movement Swivels 360°

Workshop Footprint

2000x450x1200mm

Shipping/Net Weight

150/140kg

Order no.

Price

MC1100A $749.00

CARBA-TEC ® VARIABLE SPEED LATHE

Heavy duty, cast-iron bed for added stability and minimal vibration.

Electronic variable speed drive, select from seven speeds ranging

between 50 to 3790 rpm. Four inch tailstock travel. 14” tool rest and

a 6” face plate included.

Specifications

Motor

1-1/2hp, 240v

Swing over bed capacity

406mm

Bed length

1100mm

Spindle thread

M30x3.5

Hole through tailstock

9.5mm

Spindle RPM Variable - 50 to 3790

Indexing positions 36

Morse taper

MT2

Headstock movement

Swivels 360° and slides

Workshop Footprint

1800x600x1400mm

Shipping/Net Weight

185/160kg

Order no.

Price

CT-25650 $2,395.00

NOVA DVR XP LATHE

Is the worlds only intelligent lathe, combining the best features of

stationary lathes - power, capacity and capability - with state of the

art technology to make your turning more efficient, fun and safer.

Key Features: Incredibly Versatile, Intelligent control with Adaptive

Control TM Software, Faster, more efficient turning, stationary lathe capabilities

in a compact workspace and energy efficient. Unit includes

M30 x 3.5 spindle thread adaptor. Colour may vary from that shown.

Specifications

Motor

2hp, 230v, 10AMP

Swing over bed capacity

400mm

Max. distance between centres

600mm

Spindle thread

1-1/4” x 8TPI

Hole through tailstock

15mm

Spindle RPM 178 to 3000

Indexing positions 24

Morse taper

MT2

Headstock movement 360°

Shipping/Net Weight

88/82kg

Order no.

Price

TK-DVR-XP $2,495.00

NOVA 1624-44 LATHE

A great lifetime lathe - packed with features that you’d expect from a

much more expensive lathe. The most versatile lathe on the market

which allows you to complete more wood turning projects than any

other lathe in its class. Key Features: Incredibly Versatile, 50% more

power, greater capacity, great speed range, full 360° swivel head and

extendable beds. Unit includes M30 x 3.5 spindle thread adaptor.

Colour may vary from that shown.

Specifications

Motor

1-1/2hp

Swing over bed capacity

400mm

Max. distance between centres

600mm

Spindle thread

1-1/4” x 8TPI

Hole through tailstock

15mm

Spindle RPM 178 to 3000

Indexing positions 24

Morse taper

MT2

Headstock movement Full 360°

Shipping/Net Weight

120/114kg

Order no.

Price

TK-1624-44 $1,395.00

Want to see more? See our website for our full range of products.

39


Woodturning & Accessories

BED EXTENSION

Trapezoidal design,

computer designed

for maximum

strength, heavyduty

cast iron, easy

fit to Nova lathes,

each unit gives 510mm between centre capacity.

13kg.

Order no.

Price

TK-BEDEXTN $229.00

CAST IRON

STAND

CAD designed for

exceptional structural

strength. Compact

footprint takes

up less space, but

achieves maximum

strength and rigidity.

Heavy-duty cast iron

construction.

Order no.

Price

TK-STAND-CAST $499.00

BOWL TOOLREST

25.4mm shank for super

strong platform, solid

cast iron for maximum

strength, special curved

design makes bowl turning

easier. Ideal for use

with outrigger accessory.

Order no.

Price

TK-REST-BOWL $49.00

CENTRE SYSTEM

Unique combination system provides comprehensive

tailstock support for all woodturning

requirements. Over 6 functions in

one handy unit. Includes quick change 2MT

tapers.

Order no.

Price

TK-CENTRE $79.00

SWING AWAY

MOUNT

Space saving - attach

an extra lathe

bed extension (not

included) for longer

projects, swing the

bed out of the way and save space when you

don’t need the extra capacity.

Order no.

Price

TK-SWINGAWAY $159.00

OUTRIGGER

Articulated design,

very quick and easy

to move into position,

heavy-duty cast

iron, Quick lock cam

action, fast, positive

locking action.

Order no.

Price

TK-OUTRIGGER $289.00

TOOLRESTS

25.4mm shank for super

strong platform, cast iron

with ribbing to maximise rigidity.

Small size makes it

perfect for smaller projects.

Order no.

Price

TK-REST-100MM $39.00

SPANNER

Fits all NOVA chucks. Designed

to unscrew the chuck

from the lathe. Can be used as

the body grip handle for original

NOVA chuck, SuperNova

and SuperNova2 chucks.

Order no.

Price

TK-SPANNER $17.00

LATHE HANDWHEEL

The handwheel unit is used

on the outboard end of the

headstock spindle. It can

be used to position work by

hand or to slow down the

spindle by hand.

Order no.

Price

TK-HANDWHEEL $35.00

TOOLREST COLLAR

A simple collar to provide

fixed height for

the toolrest, saving the

turner from having to

find the same height

again each time.

Order no.

Price

TK-COLLAR $14.00

90MM TEKNATOOL NOVA G3 KEY

OPERATED CHUCK

Ideal for those with mid-size lathes. Good

all-round chuck for the beginner or intermediate

user or as a second chuck for the

advanced turner. Takes all accessory jaws.

Keyed chucks offer an the advantage of one

handed operation.

Features Include:

• Fully backwards compatible with Super

Nova and Nova Chuck Jaw sets and

inserts.

• Jacobs style chuck key with large, easy

grip handle.

• Fitted with 50mm Jaws as standard.

• Expanding Mode- holds work from 53-

72mm

• Contracting Mode- holds work from 42-

63mm

When ordering your chuck please specify the

required insert reducer to match your lathe

spindle thread. Price Includes Insert.

Order no.

Price

TK-G3 $169.00

100MM TEKNATOOL SUPERNOVA 2

KEY OPERATED CHUCK

Ideal for those with lathes up to 508mm

swing. Brilliant all-round chuck for the majority

of users, from beginner to advanced.

Takes all accessory jaws. Keyed chucks offer

the advantage of one handed operation.

Features Include:

• Fully sealed composite backing plate.

• Fully backwards compatible with Super

Nova and Nova Chuck Jaw sets and

inserts.

• Fitted with 50mm Jaws as standard.

• Expanding Mode-holds work from 53-

72mm

• Contracting Mode- holds work from 42-

63mm

When ordering your chuck please specify the

required insert reducer to match you lathe

spindle thread. Price Includes Insert.

Order no.

Price

TK-SN2 $199.00

40 For more information & to shop online go to www.carbatec.com.au


Features standard on all NOVA Jaws:

Full Cross Function:

Only NOVA Chucks give you the same jaw fixing

system and same insert/adaptor system

across all chuck models.

This means all accessory jaws in the range

fit all the chucks in the range, including older

chuck models*, giving you the ultimate flexibility.

In buying a NOVA chuck, you can be

confident that whether you want to move up

or down the range, any accessories you have

invested in will Fit.

TK-6025

TK-6026

NEW NOVA MINI JAWS PACKAGE

NOVA Mini jaws set is designed to enrich

NOVA jaw offering in mini turning area. This

package consists of 4 types of jaws: NOVA

20mm jaw, NOVA Mini Spigot jaw, NOVA

Mini Step Jaw and NOVA 70mm jaw, .

They are ideal to use on NOVA

Midi chuck for midi/mini work.

TK-JS70N

TK-JS20N

BENEFITS & FEATURES

• A great range of smaller projects can

be mounted and turned using either the

expansion mode (mostly for bowls) or

the contraction mode (mostly for

spigots)

• Made from medium tensile carbon

K1045 steel to provide maximum

structural strength.

• Standard Woodworm Screw can be

used with these jaws

• Able to be used on all Teknatool Chucks

in the range.

Order no. Description Price

TK-6025 Mini Step Jaws $57.00

TK-JS70N 70mm Bowl Jaw $57.00

TK-6026 Mini Spigot $65.00

TK-JS20N 20mm Jaw $45.00

75MM BOWL JAWS

The dovetail walls are

3 x the thickness of

conventional jaw types

for rugged work holding

for larger/heavier

bowl work. Deep smooth

walled dovetails holds wood gently but

very firmly.

Order no.

Price

TK-6014 $71.00

STEP JAW SET

Designed primarily to

grip in the contracting

mode, the base

(foot) of footed bowls.

Provides optimum

gripping for three base

sizes with minimal crush damaged wood.

Order no.

Price

TK-JS75DT $65.00

100MM JAW SET

The 100mm jaw sets

are designed for an

expanded dovetail grip

(up to 14” dia. bowls),

reverse dovetail grip for

gripping footed bowls,

limited spigot facility (up to 6” long) and

provision to mount false wooden jaws.

Order no.

Price

TK-JS100N $63.00

COLE JAW SET

This versatile set designed

primarily for the re-chucking

of bowls to remove

the chuck marks or to

re-shape the bottoms of

bowls that have already been

turned. Bowls up to 254mm in

dia. can be accommodated.

Order no.

Price

TK-JSCOLE $85.00

COLE JAW SET

Designed for re-chucking

of bowls to remove chuck

marks or to re-shape the

bottoms of bowls that

have already been turned.

Other Nova jaw sets can

be fitted to the Cole Jaws

making a combination jaw

facility. Mini Cole jaws are suitable for lathes

with a minimum 203mm swing diameter.

Order no.

Price

TK-6006 $85.00

25MM JAW SET

Designed for small bowl

(expanding dovetail

mounting up to 6” dia)

and small spigot (contracting

mode) free end

turning work (up to 5” long).

Order no.

Price

TK-JS25N $45.00

Woodturning & Accessories

FACEPLATE RINGS

The Nova faceplate rings

are designed for use with

the Nova and SuperNova

accessories, when you want

to ensure an extra solid

work holding method.

Order no. Description Price

TK-6000 75mm dia. $35.00

TK-6001 125mm dia. $45.00

TK-6002 158mm dia. $49.00

35MM BOWL JAWS

The 35mm bowl jaws fit

perfectly into the current jaw

range, picking up a small

gap left between the 25mm

and the 50mm jaws. These

jaws are perfect for small to

medium sizes with maximum grip, provided

by the dovetail.

Order no.

Price

TK-6019 $45.00

75MM LONG NOSED

JAWS

A 50mm 2” rise above

their mounting base

means very long reach

deep inside of bowls. Tremendous

holding power externally and internally.

Order no.

Price

TK-6017 $79.00

SPIGOT JAWS

Available in two different

internal sizes, 35mm and

45mm. Designed to grip

both in the contracting

(gripping round or square

spigots) and in the expanding

mode with up to 10” long work pieces. Their

serrated tooth form makes for a very powerful

grip that just won’t let go.

Order no. Description Price

TK-SP35 35mm dia. $55.00

TK-SP45 45mm dia. $57.00

130MM JUMBO JAW SET

Designed to handle very large

work up to 740mm (29”) in

diameter. With these jaws

you don’t run out of capacity

using the Nova Chuck.

Order no.

Price

TK-JS130N $69.00

50MM JAW SET

These jaws are standard with

all Teknatool chuck standard

versions (excluding Nova

Titan, which has the Powergrip

Jaw as standard).

Order no.

Price

TK-JS50N $52.00

25MM PIN JAW SET

These extended jaws are designed

to act like a pin chuck

- expanding into a pre-bored

hole. This is a useful technique

for free form edge bowls.

Order no.

Price

TK-JSPIN $65.00

Want to see more? See our website for our full range of products.

41


Woodturning & Accessories

75mm faceplate

PREMIUM DRIVE CENTRE (9.5MM)

4 Prong 9.5mm (3/8”) diameter drive centre

available in 2MT. Made in UK. 177g.

PREMIUM DRIVE CENTRE (16MM)

4 Prong 16mm (5/8”) diameter drive centre

available in 2MT. Made in UK.

Order no. Description Price

AXM-340109 (9.5mm) $29.00

AXM-340111 (16mm) $29.00

PREMIUM DRIVE CENTRE (25MM)

4 Prong 25mm(1”) diameter drive centre

available in 2MT. Made in UK.

PREMIUM DRIVE CENTRE (38MM)

4 Prong 38mm (1-1/2”) diameter drive centre

available in 2MT. Made in UK.

Order no. Description Price

AXM-340106 (25mm) $35.00

AXM-340177 (38mm) $49.00

PREMIUM HOLLOW DEAD CENTRE

(8MM)

This very versatile centre, bored 5/16” diameter

right through, can be used in three

ways: with the point extended for close access

around small items, with the point just

protruding for making a ring impression and

without the tip when long hole boring. Made

in UK. 157g.

Order no.

Price

AXM-340164 $42.00

PREMIUM 90° LIVE CENTRE (22MM)

Our miniature live revolving centre has a

22mm diameter head and twin bearings. Tool

access is important when turning small items

and, the 90° nose has far less tendency to

act as a wedge when small or open grained

timbers are used. Made in UK. 215g.

Order no.

Price

AXM-340188 $49.00

PREMIUM UNIVERSAL MULTI-HEAD

LIVE CENTRE KIT

We think that this is the best universal live

centre available today. There are two sealed

bearings in the body and the working end

has a taper for mounting the various interchangeable

tips, guaranteeing that they run

perfectly concentric. The centre is supplied

with three tips, a standard 60° cone for general

work, a 9.5mm (3/8”) diameter by 16mm

(5/8”) long point for small or close work and

a cup or ring centre for open grain or split

turning. Made in UK. 660g.

Order no.

Price

AXM-340185 1MT $89.00

AXM-340186 2MT $89.00

PREMIUM HOLLOW ROTATING DRIVE

CENTRE (8MM)

One of the stars of the CARBA-TEC ® woodturning

accessory range, this hollow rotating

centre with its anti-split locating ring, choice

of removable short or long points, twin ball

bearings and 8mm (5/16”) diameter through

hole. The short point protrudes a mere 3mm

beyond the ring and allows an accurate impression

of the ring to be made on the end of

the timber. Made in UK. 247g.

Order no.

Price

AXM-340166 $72.00

PREMIUM LIVE CONE CENTRE

When using small section brittle timber, splitting

may be reduced by using a ring centre.

Made in UK. 312g.

Order no.

Price

AXM-340139 $69.00

PREMIUM 60° LIVE CENTRE

This 60° live revolving centre is made from

top quality materials, incorporates two

‘sealed for life’ dust proofed bearings and

will cover 90% of all turning applications.

Made in UK. 307g.

Order no.

Price

AXM-340203 $55.00

100mm faceplate

CARBA-TEC ® STEEL FACEPLATES

One of the things that we get asked for all the

time are quality faceplates. We have finally

found some that fit the bill. They suit our most

popular thread sizes of 1-1/4” x 8tpi and the

Australian standard M30 x 3.5. Three diameters

are available: 75, 100 and 150mm.

ECONOMY LIVE CENTRES

DRILL CHUCKS WITH NO. 1 OR 2

150mm faceplate

Order no. Description Price

CFP-75-114 75mm $12.00

CFP-75-M30 75mm $12.00

CFP-100-114 100mm $15.00

CFP-100-M30 100mm $15.00

CFP-150-114 150mm $32.00

CFP-150-M30 150mm $32.00

Order no. Description Price

MCL-222

4-prong Drive

Centre, No.2 MT

$10.00

MCL-221

4-prong Drive

Centre, No.1 MT

$10.00

MCL-202

Ball-Bearing Live

Centre No.2 MT

$15.00

MCL-201

Ball-Bearing Live

Centre No.1 MT

$15.00

Order no. Description Price

HM-3 10mm, No.2 Taper $29.00

HM-4 13mm, No.1 Taper $29.00

HM-5 10mm, No.1 Taper $29.00

HM-6 13mm, No.2 Taper $29.00

STEB STYLE CENTRE

Multi-spur drive centre with

spring loaded centre pin. Ideal

for brittle materials where minimum

pressure would be advantageous. No.

2 MT.

Order no.

Price

DC-0200 $35.00

42 For more information & to shop online go to www.carbatec.com.au


Woodturning & Accessories

GROZ ENGINEERING QUALITY EXTRA

HEAVY DUTY LIVE CENTRE

Features replaceable and adjustable needle

roller bearings that take up the radial

load and heavy duty thrust bearings for axial

loads. Centre points are ground to 60°.

Order no. Description Price

GZ-11011 No.2MT $62.00

KEYLESS CHUCK WITH NO. 2 MORSE

TAPER

13mm capacity chuck with no. 2 morse

taper shank and B-16 connection to chuck.

Order no.

Price

HM-513 $39.00

MORSE TAPER REDUCER

Enables you to use No. 1 Morse

Taper chucks, live centres,

etc. in lathes fitted

with No. 2 Morse

Taper spindles.

Order no.

Price

16002 $19.00

WOODTURNER’S

JACKET

Available in M, L,

XL and XXL. Please

specify size when

ordering. See website

for all product

sizes and codes.

Order no.

Price

JACKET-XL $59.00

VERITAS ® CENTRE FINDER

Made from aluminium a knife edge steel

blade is used to score the end of a workpiece.

You set a square or cylinder (up to

6” across) in the marker, tap it with a mallet,

turn the wood 90° and tap it again. The

result is two score lines that mark the centre

of the wood; in softwoods the lines are deep

enough to hold the drive centre directly.

Order no.

Price

05N15-01 $33.00

SKILTON

SANDER

This sander has a

handle made from hard

plastic making it light,

durable and affordable.

Attached to this

are foam backed sanding

pads mounted on ball bearings. These

spin freely with just enough ‘give’ to conform

to the inside of bowls. Supplied standard

with a 75mm head, 50mm head available

as an accessory. Heads are velcro backed.

Abrasives available.

Order no. Description Price

SK-75 Sander Complete $49.90

SK-SS50 50mm pad $23.00

SK-SS75 75mm pad $27.00

SANDPAPER

TO SUIT SK

SANDER &

SANDING

PADS VE-50 &

VE-75

Order no. Description Price

SK-5060 50mm #60grit 25pce $9.00

SK-5080 50mm #80grit 25pce $9.00

SK-50120 50mm #120grit 25pce $9.00

SK-50180 50mm #180grit 25pce $9.00

SK-50240 50mm #240grit 25pce $9.00

SK-50320 50mm #320grit 25pce $9.00

SK-50500 50mm #500grit 25pce $9.00

SK-7560 75mm #60grit 25pce $17.00

SK-7580 75mm #80grit 25pce $17.00

SK-75120 75mm #120grit 25pce $17.00

SK-75180 75mm #180grit 25pce $17.00

SK-75240 75mm #240grit 25pce $17.00

SK-75320 75mm #320grit 25pce $17.00

SK-75500 75mm #500grit 25pce $17.00

SOFT,

FLEXIBLE

SANDING PADS

For use on power

drills. Ideal for

sanding inside

bowls, etc.

Order no. Description Price

VE-30 30mm $16.00

VE-50 50mm $22.00

VE-75 75mm $26.00

VE-100 100mm $44.00

HOOK & LOOP RECTANGULAR

SHEETS To suit sanding pads above.

Order no. Description Price

SSV-80 80 grit $1.50

SSV-120 120 grit $1.50

SSV-180 180 grit $1.50

SSV-240 240 grit $1.50

SSV-320 320 grit $1.50

SSV-400 400 grit $1.50

WOODCUT ® BOWLSAVER

Making three bowls from one block of

wood is a breeze. Cut perfectly shaped

bowls ranging from 75mm to 330mm

in diameter, and up to 125mm deep.

For added stability, unit also plugs into

the MT2 socket in your lathe tailstock.

Note: A tool post will be required to

use your bowlsaver (not included).

Order no.

Price

WDC-BSVRH $419.00

WOODCUT TRU-GRIND

Incorporates a number of new features that

make it more useful than ever, especially for

the difficult task of sharpening turning gouges

and scrapers. Instructional CD supplied

together with full instruction booklet. Tool capacity

1-1/2”.

Order no.

Price

WDC-TRUGR $189.00

STURDYREST ®

Is an optional toolrest accessory for the Tru-

Grind Jig above. Note - Sturdy rest does not

include the sliding base unit as this is part of

the TruGrind above.

Order no.

Price

WDC-PVS-L $65.00

TRI-GAUGE

Maintaining the correct grind angle for your

woodturning tools is absolutely essential.

This simple gauge will enable you to check

that your grind angle is correct, every time.

Order no.

Price

WDC-TRIG $21.00

Want to see more? See our website for our full range of products.

43


Woodturning & Accessories

ECONOMY HSS

TURNING

CHISEL SETS

Made in China

these tools

compare very

favourably with

European and

Australian manufactured products but at half the price. 3 piece set

contains: 10mm spindle gouge, 12mm skew chisel and 2mm parting

tool. 500g. 6 piece set contains: 10mm spindle gouge, 13mm bowl

gouge, 22mm roughing gouge, 18mm round nose scraper, 20mm

diamond parting tool, and 25mm oval skew.

Order no. Description Price

TJ-3 3 Piece Miniature Set, Length 270mm $29.00

TJ-6 6 Piece Set $129.00

CLOTH BACKED SANDING KIT

An ideal accessory for woodturning

spindle work, pen making and other

applications where narrow sanding

strips are an advantage. This kit contains

4 rolls of 25mm x 6 metre with the

following grits: 150, 240, 320 and 400.

Individual rolls not available, only sold

in kit form. 450g.

Order no.

Price

SPS95-01 $22.00

BRASS FERRULES (PAIR)

For chisel handles. Guaranteed never to split!

Chamfered on the outside at one end for

hand comfort and on the inside at the other

end for ease of installation. Inside Dia: 22mm,

Outside Dia: 25mm, Length: 17mm.

Order no.

Price

F111B $6.00

B.

HAMLET CRAFT TOOLS

Traditionally Sheffield is a world renowned centre for the manufacturing

of quality tools and no other company exemplifies this tradition

more than

A.

C.

D.

E.

F. G.

Order no. Size Handle Length Weight Price

A. ROUGHING GOUGES

M2-063 1/2” 13” 325g $62.00

M2-064 3/4” 10” 380g $62.00

M2-065 1-1/4” 14” 650g $80.00

M2-066 1-3/4” 16” 890g $133.00

B. STANDARD ROUND SPINDLE GOUGES

M2-067 1/4” 10” 200g $35.00

M2-068 3/8” 10” 245g $41.00

M2-069 1/2” 10” 315g $48.00

M2-070 3/4” 10” 285g $62.00

C. BOWL GOUGES

M2-082 1/4” 14” 450g $52.00

M2-083 3/8” 14” 510g $62.00

M2-084 1/2” 14” 665g $76.00

M2-086 3/4” 16” 950g $142.00

M2-087 1” 16” 1132g $164.00

D. SHORT BOWL GOUGES

M2-088 3/8” 10” 428g $56.00

M2-088A 1/4” 14” 450g $52.00

“HUT” WOODTURNER’S WAX

With Money Back Guarantee. If this is not the best and easiest finish

you’ve ever tried, return it at the end of seven days for a full refund

of the purchase price. Gives a hard, full bodied finish to your work

without lines or blotches. 120g.

“HUT” PROFESSIONAL PEN POLISH WAXES

For a long wearing semi-gloss finish.

Order no. Description Price

HUT-L Woodturner’s Wax - Light $16.00

HUT-107 Professional Pen Polish Waxes - Brown $9.00

HUT-108 Professional Pen Polish Waxes - White $9.00

Order no. Description Size

Handle

Length

Weight Price

E. HEAVY DUTY SCRAPERS

M2-144F (RH) 1-1/2”x3/8” 14” 825g $112.00

M2-144E (LH) 1-1/2”x3/8” 14” 825g $112.00

REGULAR DUTY SCRAPERS

M2-112 (Square end) 1/2” 10” 290g $39.00

M2-113 (Square end) 3/4” 10” 335g $47.00

F. M2-114 (Square end) 1” 10” 385g $57.00

M2-116 (Round nose) 1/2” 10” 290g $39.00

M2-117 (Round nose) 3/4” 10” 335g $47.00

G. M2-118 (Round nose) 1” 10” 395g $60.00

M2-119 (Round nose) 1-1/4” 14” 640g $79.00

CENTRE FIND

Find the centre of round or square

stock quickly and easily. Saves you

time.

Order no.

Price

CENTRE-FIND $4.00

NOVA 10 IN 1 CHUCK GAUGE

Combines all the most commonly used

gauges into ONE efficient device. Only

gauge available for NOVA chuck jaw

dovetail measurement. Made of heavy

duty polycarbonate.

Order no.

Price

TK-10051 $15.00

44 For more information & to shop online go to www.carbatec.com.au


Woodturning & Accessories

C.

A.

B.

D.

Order no. Size Handle Length Weight Price

A. GERMAN SPINDLE GOUGES

M2-072 1/4” 10” 235g $62.00

M2-073 3/8” 10” 235g $62.00

M2-074 1/2” 10” 290g $66.00

M2-075 3/4” 10” 322g $79.00

M2-076 1” 10” 420g $111.00

M2-077 1-1/4” 10” 630g $125.00

B. BEAD FORMING TOOLS

M2-127 1/4” 10” 255g $41.00

M2-128 3/8” 10” 280g $41.00

M2-129 1/2” 10” 315g $47.00

C. LONG & STRONG DETAIL GOUGES

M2-156 3/8” 14” 430g $73.00

M2-157 1/2” 14” 630g $83.00

D. DETAIL GOUGES

M2-153 3/8” 10” 250g $47.00

M2-154 1/2” 10” 335g $54.00

E. CAPTIVE RING TOOLS

M2-130 1/4” 10” 270g $48.00

M2-131 3/8” 10” 295g $52.00

M2-132 1/2” 10” 322g $55.00

F. CONTINENTAL SPINDLE GOUGES

M2-079 1/2” 10” 230g $62.00

M2-080 3/4” 10” 285g $73.00

G. RING TOOLS

M2-125 1/2” 10” 285g $59.00

M2-126 1” 14” 600g $83.00

E.

F.

G.

M2-090

M2-089

M2-091

M2-092

M2-095

M2-094

Order no. Size Handle Length Weight Price

PARTING TOOLS

M2-089 (Thin) 1/16” 4” 120g $38.00

M2-090 1/8” 10” 220g $46.00

M2-091 3/16” 10” 305g $46.00

M2-092 (Diamond) 1/4” 10” 285g $60.00

BEADING & PARTING TOOLS

M2-094 1/4” 10” 235g $46.00

M2-095 3/8” 10” 310g $49.00

OVAL SKEWS

M2-096 1/2” 10” 235g $49.00

M2-097 3/4” 10” 335g $52.00

M2-098 1” 10” 380g $60.00

M2-099 1-1/4” 14” 555g $88.00

STANDARD SKEWS

M2-100 1/2” 10” 280g $39.00

M2-101 3/4” 10” 335g $52.00

M2-102 1” 10” 400g $65.00

M2-103 1-1/4” 14” 625g $87.00

ROUND SKEWS

M2-108 3/8” 10” 280g $40.00

M2-109 1/2” 10” 375g $46.00

ROLLED EDGE SKEW

M2-104 1/2” 10” 275g $42.00

M2-105 3/4” 10” 305g $55.00

M2-106 1” 10” 390g $69.00

M2-107 1-1/4” 10” 650g $93.00

A.

B.

M2-164 Not avail.

M2-217 M2-215 M2-134

M2-135

Order no. Size Handle Length Weight Price

HOOK TOOLS

M2-163 1/4” 10” 630g $76.00

M2-164 1/2” 10” 660g $76.00

SORENSEN SPINDLE MAKERS

M2-215 1/4” 10” 235g $62.00

M2-216 3/4” 10” 310g $67.00

M2-217 1” 10” 400g $81.00

SQUARE SECTION HOLLOWING TOOLS

M2-133 1/4” 10” 210g $41.00

M2-134 1/4” 10” 210g $52.00

M2-135 1/4” 10” 210g $52.00

A. 5 PIECE WOODTURNING TOOL SET

Set contains: 3/4” roughing gauge, 1/4” spindle gouge, 1/2” skew,

1/4” parting tool and 1/2” round nose scraper. Ideal for beginners or

experienced turners.

B. 5 PIECE MINIATURE WOODTURNING SET

Set contains: 1/8”and 1/4” spindle gouge, 1/4” skew chisel, 1/4”

round nose scraper and 1/16” parting tool. 420g.

Order no. Description Price

A. HCT-166 5 Piece Woodturning Tool Set $229.00

B. HCT-168 5 Piece Miniature Woodturning Set $129.00

Want to see more? See our website for our full range of products.

45


Dust Extraction & Accessories

CARBA-TEC ® ROOM

AIR FILTER

Remote control, 3 speed room filter. 450, 550

& 650 CFM, 1/6hp, 240v. Filters the volume

of a 3250 cuft room 12 times per hour. Unit

is fitted with a timer so that the filter can run

after personnel have left the workshop for

the day. Standard filter is electrostatically

charged to facilitate greater attraction of

dust particles. Filter can be washed or blown

out with air. Unit filters almost 100% of particles

5 microns or larger and around 85% of

particles up to 1 micron. Normally installed

hung from the ceiling but can be placed on

a bench. 24kg.

Order no. Desc. Price

CTF-1000 Room Air Filter $399.00

CTF-1000-CF Filter to suit $69.00

CARBA-TEC ® ROOM

AIR FILTER

Remote control, 3 speed room filter. 800,

1200 & 1700 CFM, 1/3hp, 240v. Filters the

volume of a 3250 cuft room 30 times per

hour. Unit is fitted with a timer so that the filter

can run after personnel have left the workshop

for the day. Unit has a three filter system

including an electrostatically charged

filter to facilitate greater attraction of dust

particles. Unit filters almost 100% of particles

5 microns or larger and around 85% of

particles up to 1 micron. (Note: This unit is

fitted with a diffuser on the exhaust side for

a more even spread of cleaned air.) Normally

installed hung from the ceiling but can be

placed on a bench. 55kg.

Order no. Desc. Price

CTF-2000 Room Air Filter $769.00

CTF-2000-CF Filter to suit $99.00

1HP ECONOMY DUST

EXTRACTOR

An excellent value for money machine. Suited

for the hobbyist or weekend woodworkers’

workshop. Effective for removal of chips

and shavings from one machine at a time.

Unit fitted to castor base for easy storage in

the small workshop.

Specifications

Motor

1hp, 240v

CFM Rating

500cfm

Filter Bag Fitted Needle Felt, 5 micron

Collection Bag Type Plastic

Hose Inlet Diameter 100mm

Drum Diameter 375mm

Number of Inlets 1

Workshop Footprint 420x650x1550mm

Shipping/Net Weight 30/27kg

Order no.

Price

FM-230 $199.00

1HP UNDER BENCH ECONOMY

DUST EXTRACTOR

Specifications

Motor

1hp, 240v

CFM Rating

500cfm

Filter Bag Fitted Cotton

Filtration Bag

30 micron

Collection Bag Type Cloth

Hose Inlet Diameter 100mm

Number of Inlets 1

Workshop Footprint 420x650x1550mm

Shipping/Net Weight 22/16kg

Order no.

Price

FM-230M $199.00

2HP ECONOMY DUST

EXTRACTOR

The ideal choice for the larger garage or

shed workshop. The additional power in this

machine means that you can have up to 2

machines connected at the same time. Perfect

for planers and jointers as the volume of

airflow and bag capacity are greater.

Specifications

Motor

2hp, 240v

CFM Rating

1,200cfm

Filter Bag Fitted Needle Felt, 5 micron

Collection Bag Type Plastic

Hose Inlet Diameter 100mm

Drum Diameter 480mm

Number of Inlets 2

Workshop Footprint 560x850x1950mm

Shipping/Net Weight 51/47kg

Order no. Desc. Price

FM-300 Extractor $299.00

FM-300-FB-5 Filter Bag $39.00

PLASTIC COLLECTION BAGS

It is necessary to use plastic bottom collection

bags to replace the cloth bags on

the bottom of your dust extractor when

fitting pleated filter cartridges. Note - CT-

2042-PCB bags also suit CT-4043 and

SDC-4045A dust extractors. Avg. 1.45kg.

All come as a 10 pack.

Order no.

Price

FM-230-PCB $14.00

FM-300-PCB $24.00

CT-2042-PCB $25.00

CT-002V-PCB $24.00

CT-003V-PCB $36.00

CT-005V-PCB $39.00

46 For more information & to shop online go to www.carbatec.com.au


Dust Extraction & Accessories

2HP CARBA-TEC ® DUST

EXTRACTOR

A specially designed motor housing and impeller

give this machine maximum performance.

A high CFM rating for a 2hp machine

means that you get the most for your money.

Specifications

Motor

2hp, 240v

CFM Rating

1,600cfm

Filter Bag Fitted Needle Felt, 5 micron

Collection Bag Type Plastic

Hose Inlet Diameter 100mm

Drum Diameter 510mm

Number of Inlets 2

Workshop Footprint 686x834x1981mm

Shipping/Net Weight 62/55kg

Order no.

Price

CT-2042-1PH $599.00

CT-2042-3PH $599.00

PLEATED FILTER CARTRIDGES

An excellent upgrade to your existing dust

extractor.

Order no. Description Price

FM-230CF To suit FM-230 $169.00

FM-300CF To suit FM-300 $189.00

SCF-5060 To suit CT-2042 & CT-003VB $287.00

PFC-1000 To suit CT-2042 & CT-003VB $695.00

INDUSTRIAL TWIN BAG

2HP DUST COLLECTOR

Sealed bearings for quiet, longer

lasting operation. Maximum CFM

rate is 1,927cfm. 3 x 4” dust ports. Motor and

hose connection point can be inverted to allow

hoses to be connected from the top if

required. Polyethylene bottom bags included

as standard.

Specifications

Motor

2hp, 240v

CFM Rating

1,927cfm

Filter Bag Fitted Needlefelt, 5 micron

Collection Bag Type Plastic

Hose Inlet Diameter 100mm

Drum Diameter 400mm

Number of Inlets 3

Workshop Footprint 470x1450x2200mm

Shipping/Net Weight 58/56kg

Order no.

Price

CT-002VB-1PH $949.00

INDUSTRIAL TWIN BAG 3HP

DUST COLLECTOR

Sealed bearings for quiet, longer lasting

operation. Maximum CFM rate is 2,170cfm.

Motor and hose connection point can be inverted

to allow hoses to be connected from

the bottom if required. Polyethylene bottom

bags included as standard. 4 x 4” dust ports.

Specifications

Motor

3hp, 240v/415v

CFM Rating

2,170cfm

Filter Bag Fitted Needlefelt, 5 micron

Collection Bag Type Plastic

Hose Inlet Diameter 100mm

Number of Inlets 4

Workshop Footprint 560x1650x2450mm

Shipping/Net Weight 85/82kg

Order no.

Price

CT-003VB-1PH $1,195.00

CT-003VB-3PH $1,195.00

INDUSTRIAL

5HP, 3PH DUST

COLLECTOR

Sealed bearings for quiet, longer

lasting operation. Machine is fitted

with 12 x 5 micron needlefelt top

filter bags to achieve the maximum filter surface

area, (around 12m 2 ). 4 x 5” dust ports.

Specifications

Motor

5hp, 3 phase

CFM Rating

3,165cfm

Filter Bag Fitted Needlefelt, 12x5 micron

Collection Bag Type Plastic

Hose Inlet Diameter 125mm

Number of Inlets 4

Workshop Footprint 650x1900x2900mm

Shipping/Net Weight 99/95kg

Order no.

Price

CT-005VB-3PH $1,995.00

Want to see more? See our website for our full range of products.

47


Dust Extraction & Accessories

CARBA-TEC ® PERSPEX ADJUSTABLE

LATHE DUST EXTRACTION HOOD

Mounts directly to the bed of most mini or

midi lathes. This unit should be used directly

behind the work being turned.

Order no.

Price

LHA-914 $69.00

CARBA-TEC ® TWO STAGE

DUST CYCLONES

The main advantages of two stage cyclone

collectors are that the heavier dust particles

and chips fall out of the airflow before reaching

the impeller. Unlike single stage units

where these particles pass through the impeller

and start clogging the filter medium.

This unit combines these advantages with

mobility, enabling even smaller shop users to

tap in to the advantages of a cyclone. The

mobile collection drum also allows you to

remove waste easily. Note: Extremely small

footprint, low overall height, also features an

automatic filter cleaning.

Specifications

Motor

2hp, 240v

CFM Rating

1,600cfm

Filter Bag Fitted Pleated Canister

Filtration Bag 1 micron

Collection Bag Type Metal Drum & Plastic

Hose Inlet Diameter

200mm with reducer to

100mm

Number of Inlets 2

Workshop Footprint 1130x640x1730mm

Shipping/Net Weight 145/119kg

Order no.

Price

UB-2100ECK $2,095.00

Specifications

Motor

3hp, 240v

CFM Rating

2,200cfm

Filter Bag Fitted Pleated Canister

Filtration Bag 1 micron

Collection Bag Type Metal Drum & Plastic

Hose Inlet Diameter

200mm with reducer to

100mm

Number of Inlets 3

Workshop Footprint 1200x880x2150mm

Shipping/Net Weight 205/171kg

Order no.

Price

UB-3100ECK $2,595.00

CARBA-TEC ® 2HP TWO STAGE

CYCLONE DUST EXTRACTOR

Requires a lead with a standard 10A plug.

This machine has an approximate airflow of

1,380CFM and a very low noise level of 80

decibels. Steel impeller size: 368mm. Filter

cartridge surface area: 8m2.

Specifications

Motor

2hp, 240v

CFM Rating

1,380cfm

Filter Bag Fitted Pleated Cartridge

Cartridge Diameter 400mm

Filtration Material

2 micron, Spun Bond

Polyester

Collection Bag Type 130L Bin & Plastic

Number of Inlets 1x175mm dia.

Workshop Footprint 1000x1500x2400mm

Shipping/Net Weight 232/190kg

Order no.

Price

CT-702 $2,495.00

CARBA-TEC ® 3HP TWO STAGE

CYCLONE DUST EXTRACTOR

Requires a lead with a 15A plug or can be

hard wired by a licensed electrician. Also

supplied is a bin extension increasing your

bin capacity to 200L. Using the bin extension

will increase the overall height of the

unit to 2.65m. This machine has a very low

noise level of 83 decibels. Steel impeller size:

394mm. Filter cartridge surface area: 10m2.

Specifications

Motor

3hp, 240v or 3hp, 415v

CFM Rating

1,650cfm

Filter Bag Fitted Pleated Cartridge

Cartridge Diameter 511mm

Filtration Material

2 micron, Spun Bond

Polyester

Collection Bag Type 130L to 200L Bin & Plastic

Number of Inlets 1x200mm dia.

Workshop Footprint 1000x1500x2400mm

Shipping/Net Weight 246/205kg

Order no.

Price

CT-703-1PH $2,995.00

CT-703-3PH $2,995.00

BIG GULP LATHE HOOD

Mounts using a t-slot style fitting on to the

bed of most midi to full size lathes. Articulated

arm allows you to swing the hood away

or adjust to accommodate larger work.

Order no.

Price

BGL-1 $89.00

BIG GULP

Large 330 x 406mm throat

on this hood makes it ideal

for collecting dust from

problem machines. It’s

lightweight, portable and

easy to position. Made

from ABS plastic with a 4”

port to connect to any dust

collection system. 8.5kg.

Order no. Description Price

BGS-1 Big Gulp With Stand $119.00

DBGULP Big Gulp Dust Chute $20.00

FLOOR SWEEP

Attaches to 4” hose or can be attached to

4” downpipe/sewerage pipe etc. Base is 22”

x 7”, outlet 4”.

Order no.

Price

M-015 $10.00

48 For more information & to shop online go to www.carbatec.com.au


Dust Extraction & Accessories

DUST EXTRACTION

GROUNDING

KIT FOR HOME

WORKSHOPS

Non-metallic ductwork

connecting

woodworking equipment

to a dust collector

should be internally grounded to minimise

the possibility of fires caused by static. 15m

of wire.

Order no.

Price

GK-50 $22.00

ADJUSTABLE

DUST ARM

Attaches to a

table or mounts to

a wall or ceiling.

Arm extends 44”

vertically and

60° horizontally.

Plastic hood has

4” x 10” opening,

accepts 4” hose.

Order no.

Price

ADA-1 $89.00

3-WAY DUST COLLECTION JUNCTION

Add more tools to your dust collection system

by branching off your main line with this

3-way Dust Collection Junction. All ends

have a 4’’ O.D. and a 3-3/4’’ I.D. Works well

with blast gates, keeping suction to a maximum.

Order no.

Price

RK-42289 $22.00

DUST CHUTE

10” x 4” plastic. 370g.

Order no. Price

M-134 $15.00

CLEAR DUST

EXTRACTION KIT

This kit includes

8 x 100mm x

1m lengths,

2x 100mm 90°

Bends, 2 x

100mm 90°

branches, 2 x

100mm 60° bends, 3 x 100mm Blast Gates,

16 x joiners and mounting hardware.

Order no.

Price

YW-2000 $199.00

CARBA-TEC ®

4” DUST

COLLECTION

ACCESSORY

KIT

Includes: 2 x

3m lengths of

4” hose, 4 x

blast gates, 10 x stainless steel hose clamps,

1 x Y-junction, 1 x floor sweep, 1 x saw table

dust hood, 1 x universal dust hood and 1 x

jointer dust hood. 8kg.

Order no.

Price

DCK-3 $99.00

NEW

DUST RIGHT

4” QUICK

RELEASE

STARTER KIT

Dust Right 4’’ Quick

Release Starter Kit Move

dust collection from one tool to the

next like never before! One end of the 4’’

Dust Right Tool Port connects tightly to any

tool with a 4’’ dust port, while the other end

fits perfectly into the Dust Right Handle.

Kit Includes:

• Two 4” Dust Right TM Tool Ports with Two

Metal Hose Clamps.

• Dust Right TM Handle

Order no.

Price

RK-42354 $39.00

DUST DEPUTY

CARBA-TEC ® DUST

DEPUTY - BY ONEIDA

AIR SYSTEMS

The dust deputy is an

extremely efficient,

cyclonic pre-separator for

vacuums. Trap dust in the

barrel and NOT in your shop

vacuum. The Dust

Deputy will filter 99%

of sanding dust, with

only 1% going into the

vacuum. Extend the

life of your vacuum and

filters! Maintain maximum

suction, no loss

of airflow, and an end to

clogged filters. The tapered inlet and outlet

accommodates different sized hoses and

couplings. Made in USA.

Order no.

Price

DDAUS $189.00

DIY DUST DEPUTY

KIT - CYCLONE

ONLY

You now have even

more options of mounting

the Dust Deputy in

your shop, and easier

hose connections with

the tapered inlet and

outlet (2” inner diameters).

Note: Bucket,

hardware and hoses

required, but not included.

Order no.

Price

DD-DIY $69.00

SUPER DUST

DEPUTY

High efficiency cyclone

separates 98%

of wood waste before

the filter. Filter clogging

will no longer

reduce airflow.

Order no.

Price

DD-SUPER $549.00

CARBA-TEC ® DUST WAND KIT

This ingenious kit hooks onto the end of your

dust extraction hose allowing you to walk

around your workshop to pick up shavings

and dust. Kit includes: adjustable dust wand

handle, clear length of tubing, quick connect

blast gate, floor sweep intake and an additional

dust wand handle that has bristles for

cleaning benches, etc. 3kg.

Order no.

Price

YW-1106 $49.00

NEW

DUST RIGHT 4” TOOL PORTS

One end connects tightly to any tool with a

4” dust port, while the other fits perfectly into

the Dust Right Handle (which connects to

4” hose and, ultimately, your dust collector),

allowing you to move dust collection from

tool to tool like never before! Includes two

ports and two metal hose clamps. Does not

include handle as shown.

Order no.

Price

RK-25516 $20.00

2-1/2” HOLD TITE HOSE KIT

Includes: 2-1/2” Hose, extends 260 x

1000mm, 2 x couplers, tapered, wide nozzle.

Order no. Description Price

HTH-970 Hold Tite Hose Kit $15.00

HTH-990 Hose extender kit $11.00

Want to see more? See our website for our full range of products.

49


Dust Extraction & Accessories

5” METAL BLAST GATE

Order no.

Price

YW-1084 $18.00

ECONOMY PLASTIC BLAST GATES

Order no. Description Price

M-025 2.5” to 2” reducer/blast gate $7.00

M-005 3” $7.00

M-006 4” $7.00

YW-1008 5” $10.00

YW-1114 Blast Gate Bracket ONLY $7.00

SHEET METAL BLAST GATE

Order no. Description Price

M-011 4” $26.00

BLAST GATE

This blast gate is designed

to push directly onto the

spigot of most woodworking

machines and the opposite

side will connect directly into

a 4” hose. 210g.

Order no. Description Price

YW-1057 4” /90mm $10.00

Y JUNCTIONS

Order no. Description Price

YW-1050 2-1/2” $7.00

M-001 3” $7.00

M-002 4” $9.00

YW-1049 5” $13.00

ELBOWS

Order no. Description Price

M-004 4” $9.00

PLASTIC

CONNECTORS

Primarily used for

joining lengths of hose.

Order no. Description Price

M-017 3” $5.00

M-018 4” $8.00

STEPPED

REDUCER

2.5” to 2”, 1.5”, 1.25” and

1”. Cut off the unwanted

portion with a handsaw.

Order no.

Price

M-031 $9.00

LARGE STEPPED

REDUCER

6” to 5”, 4”, 3”, 2.5”,

2” and 1”. Cut off the

unwanted portion with

a handsaw.

Order no.

Price

YW-1039 $10.00

REDUCERS

Order no. Description Price

M-036 6” to 5” Metal $38.00

M-037 6” to 4” Metal $36.00

M-035 5” to 4” Plastic $10.00

M-009 4” to 3” Plastic $7.00

W-1022 2.5” to 1.5” Plastic $7.00

TAPERED STYLE REDUCERS

Order no. Description Price

M-038 4” to 2.5” Plastic $7.00

M-030 4” to 2” Plastic $7.00

YW-1094 4” to 2.25” Plastic $7.00

OFFSET REDUCER

Order no. Description Price

M-039 4” to 2.5” Plastic $7.00

DUST HOSE J-HOOKS

These items allow you to get your dust extraction

hose, ropes and coils of wire up off

the workshop floor, minimising trip hazards.

Order no. Description Price

JH-2PCE Sold in pairs $7.00

INSIDE THREADED RUB-

BER DUST FITTING

The flexible rubber fittings

form a better seal on the

hose and allow for quick

connection to machinery

and other rigid fittings.

Order no. Description Price

HM-1112 2” $8.00

HM-1113 3” $10.00

HM-1114 4” $12.00

DUST SEPARATOR LID

Converts your single

stage dust collector

into a more efficient

two stage system.

2x4” ports fitted as

standard.

Order no.

Price

DBS-1 $27.00

CONNECTORS

Allows fitting to fitting connection

without the need

for hose in between.

Order no. Description Price

YW-1070 4” $7.00

OUTSIDE THREADED

DUST FITTINGS

Simply screws inside the

spiral hose.

Order no. Description Price

M-10145 5” to 5” connector $9.00

M-10143 4” to 3” reducer $9.00

M-10146 4” to 2-1/4” reducer $9.00

M-10136 4” to 4” connector $9.00

M-10141 3” to 3” connector $9.00

4” SUPER FLEX TM

DUST EXTRACTOR

HOSE Capable of being

concertinaed to almost

1/3 of it’s fully extended

length.

Order no. Description Price

HOSE42B 4” x 2m long $27.00

HOSE43B 4” x 3m long $38.00

HOSE (SOLD PER

METRE)

Our strongest hose

yet less flexible than

our SuperFlex TM hose.

Order no. Description Price

HOSE2 2” $12.00

HOSE2.5 2.5” $13.00

HOSE3 3” $14.00

HOSE4 4” $15.00

HOSE5 5” $27.00

HOSE6 6” $33.00

HOSE CLAMP

Band type with thumb

screw adjustment.

Order no. Description Price

YW-110T 4” $6.00

HOSE CLAMPS

Wire or band type may

be supplied depending

on availability.

Order no. Description Price

M-052 2” $3.00

M-052.5 2.5” $3.00

M-053 3” $3.00

M-054 4” $3.00

M-055 5” $3.00

M-056 6” $3.00

50 For more information & to shop online go to www.carbatec.com.au


Safety & Workshop Accessories

RESPIRATOR

MASK

P2 respirator masks

with exhalation

valve. Dual headstrap

for optimum

fit. Pack of 12.

UVEX EARMUFFS

These top class

earmuffs are Class

5 ear protection and

are rated at 27 decibels. Fitted

with adjustable headband.

SAFETY GOGGLES

Clear polycarbonate goggles. These safety

goggles are scratch resistant and are able

to be worn over the top of reading glasses.

Order no. Description Price

80PC321 Respirator Mask $29.00

UVEX2-27DB Uvex Earmuffs $48.00

40SN160 Safety Goggles $11.00

3M DISPOSABLE

HALF FACE

RESPIRATOR

MASK

An excellent choice

for work settings involving

heat, humidity

and long periods

of wear. Classified

as an A1B1E1K1P2

respirator. Able to

be used for protection

from dusts, mists, fumes, smokes, as

well as organic vapours, acid gases, sulphur

dioxide and ammonia.

Order no.

Price

3M-4279 $49.00

FULL

FACESHIELD

Perfect for woodturning,

this full,

clear polycarbonate

face shield is

scratch resistant

and the visor can

be replaced. Adjustable

headband.

275g.

Order no.

Price

40VC105 $39.00

PROFESSIONAL FACE SHIELD

In addition to providing excellent protection,

this newly developed face shield is exceptionally

comfortable and easily adjusts for fit

and shield angle. Its contoured frame wraps

around your face to protect your chin and

forehead, much like a goalie mask. Suitable

for prolonged use, it has a cushioned

headband with a washable brow pad. The

headband adjusts and secures easily using

a rear-knob double-ratcheting system. The

tough polycarbonate shield has a scratchresistant

anti-static and anti-fog coating.

Measures about 9-1/2” wide by 13” tall and

weighs 12 oz. Made in the USA.

Order no. Description Price

22R72-60 Face Shield $59.00

22R72-61 Repl. Shield. ea. $29.00

PAFTEC CLEANSPACE ® RESPIRATOR

Designed and assembled in Australia this

innovative mask solves many of the inherent

problems in dust mask technology. At

around 500g this unit is the smallest and

lightest powered respirator in the world.

Easily adjusted to fit around the back of

your neck. The responsive flow control software

responds to air flow demand breath

by breath, making it pleasant and easy to

breathe. Complies with AS/NZS1716 offering

minimum 99% effective filter efficiency for

particulate matter of 0.3um and above with

the standard filter. Includes; Respirator unit,

small and large neck pad, recharge unit, extra

head strap and storage bag.

Order no.

Price

PTR-1 $429.00

POWERED DUST MASK

Distributed by Carba-Tec ® , this affordable

powered dust mask removes the majority of

minute wood dust and composite particles

down to as small as 0.4 microns. The face

cup is made from soft silicon for enhanced

wearer comfort. Used air is exhaled through

the two non-return valves on the side of the

mask. Unit takes 4 AA batteries (not included)

or 4 equivalent rechargeable batteries

(not included). Continuous run time on one

set of batteries approximately 6 to 10 hours.

Unit is provided with 3 particulate filter cartridges

and 10 pre-filter pads. Mask weight:

275g, Gross weight: 800g.

Order no. Description Price

SA-201 Powered Dust Mask $94.00

SNA-201 Pre-filter Pads-10 pack $5.00

Repl. Particulate Filter

SA-201FLT Cartridge $10.00

DUSTMASTER FACE MASK

Offers protection for the face and respiratory

system, with the filter and battery pack worn

on a belt. Clean air is delivered via a hose

to the head piece, and runs continuously for

8 hours, from a rechargeable battery. 2.8kg.

Order no.

Price

DM4 $995.00

TREND XSTREME POWERED

AIRSHIELD

Lightweight, battery powered is a self-contained

lightweight Powered Air Purifying

Respirator providing all-in-one respiratory

protection against dust, fumes and particulates,

combined with eye and face protection

against impact and liquid splash.

• Low noise fan motor provides initial rate

airflow of 210 litres per minute (lpm)

(150lpm minimum at end of battery life).

Low battery audible alarm.

• Polycarbonate faceshield with nylon

elasticated faceseal-tinted and clear

overlays are available for the faceshield.

• On-off switch easily operated with

gloved hand.

• Air flow indicator pre-checks battery and

filter performance and condition.

Order no.

Price

TREND-XS $529.00

Want to see more? See our website for our full range of products.

51


Safety & Workshop Accessories

QUARTZ

HALOGEN LOW

VOLTAGE 55W

LAMP SYSTEM

WITH 500MM

ARTICULATED

ARM. So often it is

difficult to arrange

machinery within

the workshop so

that maximum

natural light is always available or so that the

fluorescent workshop lights really illuminate

the machine in question. The CARBA-TEC

articulated lamp solves this problem. 2.7kg.

Choose 3 optional mounting systems below .

Order no. Description Price

JW-55NTL Lamp $125.00

CARBA-TEC ® FLEX-

IBLE LED LIGHT

An excellent addition

to any workshop.

This light has a 7 LED

light head and can

be positioned almost

anywhere by means

of the flexible arm.

The magnetic base

will clamp to any steel

surface or alternatively the included vise

clamp can be used to clamp to any surface

with a thickness of 60mm or less. 570g.

Order no.

Price

CT-LED7 $41.00

FLUORESCENT

MAGNIFYING

LAMP WITH

ARTICULATED

ARM

Fitted with magnifying

lens ( x

3 magnification)

and fluorescent

lamp. Allows you

to do small work

more easily and

with less eye strain. Clamps to benches up

to 43mm thick.

Order no. Description Price

JF-30LEB Lamp $132.00

Lens magnifying

JF-DOUBLER doubler $31.00

QUARTZ

HALOGEN LOW

VOLTAGE 20W

LAMP SYSTEM

WITH 700MM

WITH FLEXIBLE

GOOSENECK

So often it is difficult

to arrange

machinery within

the workshop so that maximum natural light

is always available or so that the fluorescent

workshop lights really illuminate the machine

in question. CARBA-TEC ® Stayput lamps

solve this problem. 1.92kg.

Order no.

Price

HL-700 $94.00

OPTIONAL BASES

Three optional mounting systems are available.

With the most popular being the permanent

magnetic base. This is recommended

for most applications. 500g.

Also available is the angle clamping bracket

which can be clamped to table tops, etc. with

a maximum thickness of 42mm. 440g.

For wall mounting use the right angle bracket.

180g.

Order no. Description Price

J-M01 Magnetic Base $13.00

J-C02 Mounting Clamp $9.00

J-L02 Right Angle Bracket $6.00

LIMBER

MAGNETIC LED

LIGHT

A convenient micro

light for direct spot

lighting. This tool has

a flexible shaft 300mm

in length and a magnetic

base allowing it

to be used on a variety

of machinery. 85g.

Order no.

Price

CT-MLL $15.00

HEADBAND LOUPE WITH

INTERCHANGEABLE LENSES

For close work on models, stamps, electronics,

watch making or other intricate crafts,

etc. a headband loupe is essential. It allows

both hands to be used for the purpose at

hand. This was the best unit we could find

on the market and it is highly recommended.

Unit fitted with three powerful LED lamps

(requires 3 AAA batteries, not included). Interchangeable

lenses with magnification factors

of 1, 1.5, 2 & 2.5 included. Can be used

with or without your spectacles. The wearing

weight is 195g. Shipping weight is 560g.

Order no.

Price

LP-1525 $52.00

10X MAGNIFIER LOUPE

This loupe has great resolution, adjustable

focus, and a wide viewing angle. All properties

of a professional loupe. The removable

scale plate can be interchanged with a nonscaled

lens. The LED clip-on light will illuminate

the surface as necessary.

Order no.

Price

30C04-07 $59.00

SLIDING 20X LOUPE

20 times magnification.

A light automatically

turns on when you slide

the loupe open. Batteries

included.

Order no.

Price

CT-1021 $5.00

HAND HELD 4 X MAGNIFIER

Overall length 200mm. Fitted with 6 bright

LED’s surrounding the lens. Two switch settings

allowing one or five LED’s to be illuminated.

Requires 2 AAA batteries, not supplied.

Order no.

Price

CT-1065 $9.00

SURGICAL BRUSHES (6 Pairs)

If you have had an operation recently, you

may have used this nylon brush with a foam

pad on the back of it to self-prep the operating

area. The nylon brush is intended for use

directly on skin and is gentle but very effective.

What is amazing is the way it can winkle

dirt out of your cuticles and from under your

fingernails; in non-medical use this solves a

constant problem for gardeners and woodworkers.

Although it measures only 50 x

75mm, it has 1440 individual bristles that are

subtle but insistent, cleaning your hands far

better than any combination of stiff bristles

and cloths. Made in USA.

Order no.

Price

CA-203 $9.50

52 For more information & to shop online go to www.carbatec.com.au


Safety & Workshop Accessories

AMBIDEXTROUS CARVING

GLOVE

This glove can be worn on the

right or left hand to protect the

wearer from sharp knives and

chisels, whilst carving and whittling.

The fabric of the glove

is embedded with KEVLAR TM .

Greatly minimising the risk of

8 POCKET

PROFESSIONAL NAIL BAG

Steel blue colour. Set includes

tool bag and metal hammer

hangers.

Order no.

Price

AR-675 $29.00

BENCH DOG BENCH

COOKIE TM PLUS WORK

GRIPPERS BY

ROCKLER - 4 PK

Turn Bench Cookie Plus Work

Grippers into shop fixtures.

Standard and XL Risers (35142

and 34671 sold separately)

penetration of sharp objects. screw into Bench Cookie CARBA-TEC ®

Plus discs to elevate them for

Order no. Desc. Price

work with saws and other shop

ACGS Small $21.00

tools that require extra height.

ACGM

ACGL

Medium

Large

$21.00

$21.00

Standard Risers achieve a three

Bench Cookie height and XL

10 POCKET

PROFESSIONAL NAIL BAG

Steel blue colour. Set includes

tool bag and metal hammer

hangers.

Risers achieve both two and

three Bench Cookie heights.

(Each Bench Cookie is 3’’ dia. x

1’’ thick). All Risers fit 3/4” bench

dog holes or 3/4” holes drilled

Order no.

Price

into sawhorses or other fixtures

for a secure base while you work.

AR-975 $41.00

Order no.

Price

RK-38052 $15.00

CANVAS APRON

Designed with cross-back shoulder

straps to prevent neck strain,

our new apron is made from

100% cotton canvas, a washable

material that is lightweight yet

strong. At 86cm long by 70cm

wide, it provides ample side and

front coverage. The adjustable

shoulder straps secure with lowprofile,

unobtrusive clips, and

the adjustable waistband has a

quick-release buckle. The top

pocket has three compartments

for your convenience.

Order no.

Price

67K10-06 $49.00

CANVAS CHISEL AND

GOUGE ROLLS

Specially designed for cabinetmakers’

chisels and larger gouges.

The flap folds down over the

blades to protect them when the

tools are rolled up. All are fully

bound, made of heavy-duty canvas

with a sturdy cloth tie. Made

in Canada.

Order no. Desc. Price

67E01-01 6 Pocket $14.00

67E01-02 9 Pocket $18.00

67E01-03 12 Pocket $22.00

CHISEL ROLLS

Chisels not inc. Suits carpenters

and carver’s chisels.

Order no. Desc. Price

AR-9 9 Place $31.00

AR-12 12 Place $35.00

AR-13 13 Place $41.00

11 POCKET PROFESSIONAL

TOOL APRON Steel blue

colour. Suits waist from 82 to

120cm. Set includes tool belt

and metal hammer hangers.

Order no.

Price

AR-175 $69.00

16 POCKET

PROFESSIONAL TOOL

APRON

Steel blue colour. Suits waste

from 82 to 120cm. Set includes

tool belt and leather hammer

hangers.

Order no.

Price

AR-200 $83.00

50MM LEATHER TOOL BELT

Made in saddle brown with two

tangs. Suits waist from 82 to

120cm.

Order no.

Price

AR-275 $12.00

RISERS FOR BENCH

COOKIES PLUS

Standard risers double the

height and XL risers allow you to

double or triple the height of your

Bench Cookie TM .

Order no. Desc. Price

RK-35142 Risers 2pk $6.00

RK-34671 XL Risers 4pk $11.00

BENCH COOKIE TM CONES

Lift, Grip, Protect, and Finish

your project with Bench Cookie

Work Grippers and Bench

Cookie Cones!

Order no.

Price

RK-40607 $7.00

A.

B.

A. LEATHER SHOP APRON

A wonderful all-purpose leather

apron. Great protection in the

workshop. 900g.

B. DELUXE

LEATHER SHOP APRON

Our best apron. Complete with

split leg and 1 pocket. Note that

pocket is worn on the inside.

1kg.

Order no.

Price

A. AR-1783 $45.00

B. AR-2943 $55.00

Want to see more? See our website for our full range of products.

53


Safety & Workshop Accessories

ROUTER MAT

Stops those

tricky jobs from

running away

from you. Sand,

carve, plane or

rout on this slip

resistant mat.

Measures 610 x

910mm.

Order no.

Price

P-2436 $10.00

STACKABLE

UTILITY BOX

Inside dimensions

330x240x95mm with

removable and

rearrangeable

compartments.

Order no.

Price

CT-3086C $16.00

STACKABLE

UTILITY BOX

Inside dimensions

440x320x95mm

with removable

and rearrangeable

compartments.

Order no.

Price

CT-3086B $25.00

STACKABLE

UTILITY BOX

Outside

dimensions

420x330x60mm

with 20 removable bins. Lid interlocks

with bins.

Order no.

Price

CT-3086A $12.00

INDUSTRIAL

STEEL

SHELVING

1830mm high,

1955mm wide,

610mm deep.

Maximum load

on individual

shelf is 360kg when

evenly spread over entire shelf.

Order no.

Price

GR-4XHD $295.00

SHELVING UNIT

1830mm high, 1015mm

wide, 405mm deep with

5 moveable shelves.

Maximum load per shelf

is 150kg when evenly

spread over the entire

shelf.

Order no.

Price

GR-5MD $75.00

Belts & Braces

A. CASUAL BRACES

2” x 48” long, Fully elasticised. Black heavy

duty clips and genuine black leather cross

patch.

Order no. Design Price

MAX-BL-TMYE Yellow Tape $12.00

MAX-BL-TMRE Red Tape $12.00

MAX-BL-ELEC Electrician $12.00

MAX-BL-PAIN Painter $12.00

MAX-BL-BUIL Builder $12.00

MAX-BL-PLUM Plumber $12.00

MAX-BL-GRAS Garden $12.00

MAX-BL-FISH Fishing $12.00

MAX-BL-AUST Aussie Flag $12.00

MAX-BL-BLUE Blue $12.00

MAX-BL-BLAC Black $12.00

MAX-BL-RED Red $12.00

MAX-BL-YELL Yellow $12.00

MAX-BL-GREE Green $12.00

B. CONSTRUCTION BRACES

2” x 48” long, non-elastic fronts double elasticised

backs with black heavy duty clips

and genuine black leather cross patch.

Order no. Design Price

MAX-CBL-ELEC Electrician $12.00

MAX-CBL-PAIN Painter $12.00

MAX-CBL-BUIL Builder $12.00

MAX-CBL-PLUM Plumber $12.00

MAX-CBL-BLUE Blue $12.00

MAX-CBL-BLAC Black $12.00

MAX-CBL-RED Red $12.00

MAX-CBL-YELL Yellow $12.00

MAX-CBL-GREE Green $12.00

C. PADDED CONSTRUCTION BRACES

2” x 48” long, non-elastic fronts double elasticised

backs with black heavy duty clips and

genuine black leather cross patch, also with

adjustable shoulder pads.

Order no. Design Price

MAX-CBL-PAD Padded $19.00

CASUAL BELTS

1-1/4” x 48” long, polyester with black military

style buckle.

Order no. Design Price

MAX-BEL-ELEC Electrician $12.00

MAX-BEL-PAIN Painter $12.00

MAX-BEL-PLUM Plumber $12.00

MAX-BEL-BUIL Builder $12.00

CONSTRUCTION BELTS

2” x 48” long, construction belt with side release

buckle.

Order no. Design Price

MAX-CBEL-TMYE Electrician $12.00

MAX-CBEL-TMRE Painter $12.00

Garden

Painter

Plumber

Electrician

Builder

Aussie

Fishing

Red Tape

Yellow Tape

Red

Green

Black

Blue

Yellow

54 For more information & to shop online go to www.carbatec.com.au


Metalworking & Accessories

CARBA-TEC ® SIEG MICRO

MILLING MACHINE X0

• Ideal for the model maker or

electronics enthusiast.

• Accuracy and compact design

allow drilling of holes up to 6mm

diameter.

• The cast iron base provides

stability, heft and dampens

vibration.

• Digital read-out of the quill travel

with zeroing facility and choice

of metric or imperial units.

• Coarse or fine downfeed

Note: Table shown supplied

separately.

Most popular accessories to suit:

CARBA-TEC ® SIEG SMALL

MILLING MACHINE X2

• Cast iron construction with finely

ground table, hardened slide

ways and a variable speed

spindle drive.

• The head and column tilt to 45°

left or right which is a plus for

complex jobs.

• The headstock quill has a fine

downfeed feature for milling and

a rack and pinion downfeed

system for drilling.

• An excellent choice for the

model engineer.

Most popular accessories to suit:

Quick Vise

SN-10035

Milling Table

SN-10138

Mill Collet Set

SN-10139

Micro Drill Set

MDS-10PCE

12 Piece

Clamping Kit

SN-10104

12 Piece HSS

End Mill Set

EMS-12PCE

Swivel Vise

SN-10109

Slotting Arbor

SN-10129

Collet Set

SN-10037

End Mill Set

SN-10046

CARBA-TEC ® SIEG

MINI MILLING

MACHINE X1

• Constructed from cast iron

• Perfect introduction mill to

metal working.

• The head tilts 45° left and

right allowing for complex

jobs.

• The cross slide table is fitted

with t-slots so that clamps

or a vise can be used to

secure work.

CARBA-TEC ® SIEG SMALL MILLING

MACHINE X3

• Well constructed vertical mill drill

with excellent specifications.

• Compact size makes it the

perfect size for just about

any workshop.

• Electronically variable spindle

speed with a choice of two speed

ranges,

• Rectangular column with

adjustable dovetail guides for

the head

• Vertical feed control wheel

operates smoothly with scales

graduated in steps of 0.02mm.

Most popular accessories to suit:

Most popular accessories to suit:

HSS Mill Cutter

Set - SN-10069

Rotary Table

CT-110240

Angle Vise

SN-10133

Clamping Kit

SN-10105

Collet Set

SN-10078

Clamping Kit

SN-10047

Rotary Table

SN-10094

Quick Vise

SN-10036

Collet Set

SN-10037

HSS Mill Cutters

SN-10045

Specifications MILL-X0 MILL-X1 MILL-X2 MILL-X3

End Mill Capacity 6mm 10mm 16mm 16mm

Face Mill Capacity 6mm 16mm 30mm 50mm

Spindle Stroke 40mm 30mm 180mm 80mm

Throat 165mm 140mm 165mm 230mm

Max. Dist. Spindle to Table 190mm 230mm 280mm 380mm

Spindle Taper - MT2 MT3 or R8 MT3 or R8

Spindle Speeds Approx. (RPM)

High range: 100-5000

Low range: 100-3600

High range: 100-2000

Low range: 100-1000

High range: 100-2500 ±10%

Low range: 100-1100 ±10%

High range: 100-2000

Low range: 100-1000

Forward/Reverse - Yes Yes Yes

Column Tilt - ±45° ±45° -

Table Size - 240x145mm 390x92mm 550x160mm

Table Cross Travel - 180mm 100mm 145mm

Longitudinal Travel - 180mm 220mm 400mm

Motor 1/5hp 1/5hp 1/2hp 3/4hp

Overall Height 415mm 720mm 760mm 930mm

Shipping/Net weight 17/14kg 56/40kg 68/50kg 198/165kg

Price $399.00 $699.00 $825.00 $1749.00

Want to see more? See our website for our full range of products.

55


Metalworking & Accessories

CARBA-TEC®

SIEG

MINIATURE

LATHE - C0

A quality miniature metalworking lathe,

with a cast iron, hardened and ground bed. Fitted with

a 3 jaw self centring 50mm dia. chuck with reversible

jaws, single tool post taking 8mm cutting tools, splash guard and

interlocked chuck guard for safety. The spindle thread is 14 x 1.0mm.

An optional compound slide is available. Standard accessories include

50mm tommy bar style 3-jaw chuck, wrench set and oil bottle.

CARBA-TEC ®

SIEG MINI LATHE C3

Standard accessories include: drip tray (not

shown), splash back, 80mm 3-jaw chuck, MT2

dead centre, gear change set, wrench set and

oil bottle.

Most popular accessories to suit CO:

8mm Drill Chuck

SN-10159

Slide Table

SN-10154

4 jaw Self

Centering Chuck

SN-10181

Live Centre

SN-10156

5pce Cutting Set

SN-10004

CARBA-TEC ® SIEG LATHE C4

Standard accessories include: splash back,

integral digital display, 100mm 3-jaw chuck,

reverse jaws for chuck, MT2 dead centre, MT3

dead centre, gear change set, wrench set and

oil bottle.

CARBA-TEC ® SIEG MICRO LATHE - C1

Featuring a cast iron bed this lathe is the perfect spot to begin! The

construction is predominantly from cast iron and steel.

Manual or powered leadscrew feed which can be used for thread

cutting and an extensive range of optional accessories is available.

Maximum cutting tool shank size is 8mm. An optional compound

slide is available. Standard accessories include 80mm 3-jaw chuck,

MT1 dead centre, wrench set and oil bottle.

Most popular accessories to suit C1:

CARBA-TEC ® SIEG LATHE C6

Standard accessories include: splash back, 125mm

3-jaw self centring chuck, MT2 dead centre, MT3 dead

centre, gear change set, wrench set and oil bottle.

An optional stand with drip tray is available for this

machine as an optional extra.

Most popular accessories to suit C3/C4/C6:

Parting Tool

CT-392450

Boring Bar

CT-393500

Drill Chuck

SN-10091

Sliding Table

SN-10083

Mill Attachment

SN-10082

Parting Tool

CT-392450

13mm Tailstock

Drill Chuck

SN-10027

Live Centre

GZ-11011

Handwheel Kit

SN-10001

5pce Cutting Set

SN-10004

Specifications LATHE-C0 LATHE-C1 LATHE-C3 LATHE-C4 LATHE-C6

Swing over bed 110mm 140mm 180mm 210mm 250mm

Distance between centres 125mm 250mm 350mm 410mm 500mm

Compound/Cross Slide Travel /50mm - 70mm/76mm 70mm/100mm 75mm/110mm

Spindle Bore 10mm 10mm 20mm 20mm 20mm

Spindle High/Low Range Speeds Approx. 100-3800rpm 100-2000rpm 100-3000rpm/100-1200rpm 150-2000rpm 125-2000rpm

Spindle Taper - MT2 MT3 MT3 MT3

Tailstock Taper - MT1 MT2 MT2 MT2

Thread Cutting Pitch -

Metric: 0.5-1.25, 5

steps

Imperial: 16-24 TPI,

5 steps

Metric: 0.4-2.0mm, 5 steps

Imperial: 12-52 TPI, 5 steps

Metric: 0.25-3.0mm

Imperial: 5-24 TPI

Metric: 0.4-3.0mm, 12

steps

Imperial: 10-44 TPI,

8 steps

Dimensions 440x270x210mm 620x300x220mm 880x290x290mm 1000x550x400mm 1200x660x600mm

Motor 1/5hp 1/5hp 1/2hp 1-1/3hp 3/4hp

Shipping/Net weight 25/23kg 32/23kg 56/44kg 125/94kg 180/145kg

Price $499.00 $749.00 $1039.00 $1849.00 $1375.00

56 For more information & to shop online go to www.carbatec.com.au


Metalworking & Accessories

CARBA-TEC ® SC3

METALWORKING LATHE

Machine brass, aluminium, gun

metal, cast iron, industrial nylon, plastics,

silver, gold, platinum, nickel-silver and even

wood. This variation on our popular C3

model now has a brushless DC motor that

decreases noise and improves the efficient

delivery of power to the spindle. An excellent

choice for the model engineer.

Specifications

Swing over bed 180mm

Distance between

centres

350mm

Compound/Cross

Slide Travel

55/65mm

Spindle Bore

20mm

Spindle High/Low

Range Speeds Approx.

100-2500 ±10% rpm

Spindle Taper

MT3

Tailstock Taper MT2

Thread Cutting Pitch

12-52 TPI (18 thread

pitches)

Dimensions

800x290x290 mm

Motor

500W

Shipping/Net weight 50/55 kg

Order no.

Price

LATHE-SC3 $1,095.00

CARBA-TEC ® SMALL

MILLING

MACHINE SX2

Cast iron construction,

a finely milled table,

hardened slideways

and a variable speed

brushless DC spindle

drive. An excellent choice

for the model

engineer.

MINI TUBE,

SHEET

BENDER &

ROLLER

Invaluable to

hobby engineers

or any one

else who needs to

bend or roll tube and small sheet materials.

Material width capacity 75mm.

Order no.

Price

SN-20013 $100.00

VERITAS TM METAL BENDER

Made of high-strength malleable cast iron,

capable of bending up to 1/8” mild steel. The

main purpose of the metal bender is to make

bends up to 90° for such things as angle

brackets and sheet-metal parts.

Order no.

Price

50K08-01 $31.00

200MM MINIATURE BENDING &

CUTTING SHEAR

Just because its small don’t shy away. This

unit is capable of working with mild steel

up to 22 gauge in thickness. You can bend

and shear mild steel, brass, copper, etc. with

ease. 12.7kg.

Order no.

Price

SN-20002 $299.00

FIVE PIECE SET

OF 2ND CUT 8”

FILES

A set of finer files,

for smoother cuts.

Five shapes - Flat,

Square, Round,

Triangle & Half

Round/Flat. 865g.

Made in Italy.

Order no.

Price

CRD-2150005 $94.00

FIVE PIECE 8”

BASTARD FILE

SET

A set of coarse

files, for faster cuts.

Five shapes - Flat,

Square, Round, Triangle

& Half Round/

Flat. 865g. Made in

Italy.

Order no.

Price

CRD-2150006 $94.00

CORRADI NEEDLE FILE 12 PIECE SET

A precision engineering quality 12 piece

set of essential needle files. 160mm overall

length, 80mm cut. 150g. Made in Italy.

Order no.

Price

CRD-125001 $178.00

Specifications

End Mill Capacity 20mm

Face Mill Capacity 35mm

Spindle Stroke

Throat

167mm

Max. Dist. Spindle

to Table

280

Spindle Taper

MT3 or R8

Spindle Speeds Approx.

(RPM)

100-2500±10%rpm

Forward/Reverse -

Column Tilt -

Table Size

400x145mm

Table Cross Travel

Longitudinal Travel 280mm

Motor -

Overall Dimension

Shipping/Net weight

520x580x760mm

58/75kg

Order no.

Price

MILL-SX2 $1,095.00

3 IN 1 PRESS BRAKE (BENDER)

GUILLOTINE AND ROLLER

For light duty sheet metal working this machine

is a dream with a bending shearing

and rolling capacity of 300mmx1mm. The

3 rollers can be accessed by lifting the top

cover. The smallest rolled diameter achievable

is 38mm.

Order no.

Price

CT-SBR-300 $399.00

IRIDIUM 8” FILE CLEANING BRUSH

This brush has fine metal ‘teeth’ that are

essential to cleaning between the grooves

of filing tools. 80g.

Order no.

Price

CRD-1690000 $15.00

CORRADI

NEEDLE FILE

HANDLE

This solid hardwood handle

makes for comfortable use of your

Corradi needle files. Simply twist to release

or lock any needle files with 1/8” round handles.

95mm long. 20g. Made in Italy.

Order no.

Price

CRD-130001 $11.00

Want to see more? See our website for our full range of products.

57


Metalworking & Accessories

A.

B.

A. MINIATURE MAGNETIC

BASE

Features two machined magnetic

faces. Height fully extended:

195mm, has universal ball and

socket joints for positioning. Accepts

standard 8mm shank dial

indicators, also accepts gauges

with 6mm dovetail mounting.

400g.

B. LEVEL TYPE DIAL

INDICATOR

Dial diameter: 32mm. 7 jewels

Graduated in 0.01mm with

maximum deflection 1mm up or

down. Changeable 6 and 8mm

stem mounting fits most magnetic

bases. 125g.

Order no.

Price

A. YW-195 $41.00

B. CG-32 $41.00

DIGITAL

INDICATOR

Dial diameter

60mm, graduated

in 0.01mm with a

range of 0-10mm.

Fitted with rotating

bezel with two

moveable guides.

Supplied in plastic storage case.

200g including the case.

Order no.

Price

CG-60 $37.00

BA TAP & DIE SET 38 PIECE

Made of high quality carbon steel

and heat treated. Plug II size 0BA,

1BA, 2BA, 3BA, 4BA, 5BA, 6BA,

7BA, 8BA, 9BA, 10BA. Bottom III

size 0BA, 1BA, 2BA, 3BA, 4BA,

5BA, 6BA, 7BA, 8BA, 9BA, 10BA.

Round Die 13/16 0BA, 1BA,

2BA, 3BA, 4BA, 5BA, 6BA, 7BA,

8BA, 9BA, 10BA. Die Handle

13/16. Mini Straight Tap Wrench

BA thread gauge. Spindle tap

wrench 1/16-1/4, Tap Guide 3/16.

Order no.

Price

CT-140710 $115.00

CARBON STEEL CUT

THREAD ME TAP & DIE SET

19 PIECE

Made of high quality Carbon steel

and heat treated. Contains 1/8” x

40, 5/32” x 40, 3/16” x 40, 7/32” x

40 tap set of 3pc each size round

die 1/8” x 40, 5/32” x 40, 3/16” x

40, 7/32” x 40, Die stock handle

2nos, Straight tap wrench 1nos.

Order no.

Price

CT-140720 $73.00

32 PIECE MICRO HSS TAP &

DIE SET

Ideal for jewellers, modellers and

hobby engineers. Set Includes: 9

tapered taps, 9 intermediate taps

and 9 matching dies in the following

sizes, 1mm, 1.1mm, 1.2mm,

1.4mm, 1.5mm, 1.6mm, 2mm,

2.2mm, 2.5mm.

Order no.

Price

MTD-32PCE $62.00

TAPERED REAMER

For enlarging holes and r e -

moving burrs, etc. Tapers from 3

to 13mm. Overall length: 123mm.

100g.

Order no.

Price

TR-127 $8.00

5 PIECE CUTTING TOOL SET

Tungsten carbide tipped. Includes

L & R facing tool, v-tool,

general purpose facing tool &

parting tool and parting tool.

8mm shanks. 200g.

Order no. Suits Price

SN-10004 All lathes $32.00

6 PCE CUTTING TOOL SET

Tungsten carbide tipped. General

purpose set. 8mm shanks. 280g.

Order no. Suits Price

SN-10006 All lathes $36.00

11 PCE CUTTING TOOL SET

Tungsten carbide tipped. Includes

L & R facing tool, v-tool,

two boring bars, general purpose

facing tool & parting tool. 8mm

shanks. 450g.

Order no. Suits Price

SN-10005 All lathes $62.00

CUTTING TOOL BLANKS IN

M35 HSS WITH 5% COBALT.

All blanks are square and 3” long.

Order no. Size Price

CT-313910 1/8”, 6g $7.00

CT-313945 1/4”, 25g $7.00

CT-313960 5/16”, 40g $8.00

CT-313975 3/8”, 55g $10.00

INDEXABLE 4 PCE CUTTING

TOOL SET

Replaceable tungsten carbide

tips. 3 x 10mm square shanks

and 1 x 10mm dia. boring bar.

570g.

Order no. Size/Suits Price

CT-777200 8mm/C0/

C1/C3 $136.00

CT-777201 10mm/C4/

C6 $136.00

REPLACEMENT CUTTING TIPS

Order no.

Price

CT-777201-TIPS $13.00

INDEXABLE 7 PCE CUTTING

TOOL SET

Replaceable tungsten carbide

tips. 12mm square shanks,

10mm dia. boring bar.

Order no. Size/Suits Price

CT-777102 8mm/All

lathes $230.00

CT-777103 10mm/C4/

C6 $241.00

REPLACEMENT CUTTING TIPS

Order no.

Price

CT-777104-TIPS $13.00

8 PCE CUTTING TOOL SET

10mm square shanks. HSS with

5% Cobalt. 670g.

Order no. Suits Price

CT-130032 C4/C6 $125.00

6 PCE CUTTING TOOL SET

Tungsten carbide tipped. 10mm

shanks. Paint job is a bit rough.

They are however, high quality

tools. 630g.

Order no. Suits Price

CT-131370 C4/C6 $45.00

6 PCE CUTTING TOOL SET

Tungsten carbide tipped. 10mm

shanks. Paint job is a bit rough.

They are however, high quality

tools. 690g.

Order no. Suits Price

CT-131320 C4/C6 $45.00

BORING AND THREAD

CUTTING TOOLS SET

6mm round HSS cutters, 130mm

long. 3/8” square holder to suit.

Order no. Size/Suits Price

CT-132710 6mm/All

lathes $90.00

CT-132720 8mm/C1/

C3/C4/C6 $92.00

58 For more information & to shop online go to www.carbatec.com.au


Metalworking & Accessories

DEBURRING TOOL

Comes complete with 5

different cutting

blades that are

stored in the

handle. 80g.

Order no.

Price

CT-000 $36.00

BORING BAR

1/2” square holder with 110mm

bar length. Holds 1/8” square

cutters. 120g.

Order no. Suits Price

CT-393500 All lathes $14.00

PARTING

TOOL

10mm shank. 120g.

Order no. Suits Price

CT-392450 C1/C3/C4/C6 $17.00

SN-10145 C0/C1/C3/C6 $27.00

STEADY REST

Order no. Suits Price

SN-10080 C1, 890g $54.00

SN-10008 C3, 1.3kg $54.00

SN-10160 C4, $54.00

SN-10019 C6, 2.9kg $80.00

FOLLOW REST

Order no. Suits Price

SN-10081 C1, 605g $36.00

SN-10009 C3, 685g $45.00

SN-10161 C4, $41.00

SN-10020 C6, 1.5kg $62.00

FACEPLATES with t-slots

Order no. Size/Suits Price

SN-10079 112mm dia./C1 $41.00

Below do not have T-slots

SN-10007 160mm dia./C3 $45.00

SN-10023 220mm dia./C6 $50.00

SN-10162 C4 $38.00

WOODTURNING TOOL KIT

Order no. Suits Price

SN-10157 C0, 320g $46.00

SN-10086 C1, 690g $54.00

SN-10064 C3 $61.00

SN-10063 C4/C6, 2kg $62.00

MORSE TAPER REDUCER

Enables you to use No. 1 Morse

Taper chucks, live centres, etc. in

lathes fitted with No. 2 Morse

Taper spindles. 100g.

Order no.

Price

16002 $19.00

GROZ ENGINEERING

QUALITY EXTRA HEAVY

DUTY LIVE CENTRES

Replaceable and adjustable needle

roller bearings take up the

radial load and heavy duty thrust

bearings for axial loads. Centre

points are 60°.

Order no. Description Price

GZ-11010 No.1mt $62.00

GZ-11011 No.2mt $62.00

QUICK CHANGE TOOL POST

Includes 4 tools rests.

Order no. Suits Price

SN-10144 C1, 1.1kg $111.00

Below include 3 tool holders

SN-10011 C3, 1.2kg $90.00

SN-10026 C6, 2.9kg $116.00

SN-10168 C4, $115.00

CARRIAGE STOP

Order no. Suits Price

SN-10182 C3 $16.00

DRIVE DOG 10mm bore. 50g.

Order no. Suits Price

SN-10015 All lathes $9.00

MILL ATTACHMENT

Order no. Suits Price

SN-10060 C6, 5.9kg $230.00

SN-10061 C3, 5.4kg $230.00

SN-10082 C1, 4.9kg $146.00

HAND FEED KNURLING TOOL

Order no. Suits Price

SN-10130 C1/C3/C4/C6,

660g $54.00

DEAD CENTRE WITH MT3

Order no. Weight Price

SN-10013 320g $13.00

DEAD CENTRE WITH MT2

Order no.

Price

SN-10088 $16.00

QUALITY ENGINEERING

DRILL CHUCKS

Order no. Description Price

SN-10091 1-10mm,with MT1 $36.00

SN-10012 1-13mm,with MT2 $55.00

COMPOUND SLIDE TABLE

Order no. Suits Price

SN-10154 C0, 375g $62.00

COMPOUND SLIDE TABLE

Order no. Suits Price

SN-10083 C1, 1.7kg $167.00

4 JAW INDEPENDENT CHUCK

Order no. Size/Suits Price

SN-10010 80mm dia./C1 $125.00

4 JAW INDEPENDENT CHUCK

WITH FLANGE (not shown)

Order no. Size/Suits Price

SN-10029A 100mm dia./C3 $136.00

SN-10025A 125mm dia./C6 $157.00

4 JAW SELF CENTRING

(not shown)

Order no. Size/Suits Price

SN-10010B 80mm dia./C1/C3 $115.00

KNURLING TOOL 300g

Order no. Suits Price

CT-391110 C1/C3/C4/C6 $25.00

KNURLING TOOL 450g

Order no. Suits Price

CT-391000 C6 $62.00

LIVE CENTRE (not shown)

Order no. Suits Price

SN-10156 C0, 75g $26.00

LIVE CENTRE WITH MT1

Order no. Suits Price

SN-10093 C1, 115g $27.00

LIVE CENTRE WITH MT2

Order no. Suits Price

SN-10024 C3/C4/C6, 550g $51.00

Want to see more? See our website for our full range of products.

59


Metalworking & Accessories

A.

LIVE CENTRE SET WITH MT1

Order no.

Price

CT-201600 $136.00

LIVE CENTRE SET WITH MT2

(Not shown)

Order no.

Price

CT-201610 $146.00

HSS END MILL SETS

Cutter set includes: 3, 4, 5, 6, 8

& 10mm cutters in 2 flute HSS.

115g.

Order no. Description Price

SN-10069 X1 $36.00

Cutter set includes: 4, 6, 8, 10,

12, 14 & 16mm cutters in 2 flute

HSS. 115g.

Order no. Description Price

SN-10045 X3 $62.00

HSS END MILL SETS

Set includes: four flute cutters in

4, 5, 6, 8, 10 & 12mm and two

flute cutters in 4, 5, 6, 8, 10 &

12mm. 530g.

Order no.

Price

EMS-12PCE $56.00

INDEXABLE TWO FLUTE

MILLING CUTTER (MT3)

Order no. Suits Price

SN-10046 X2/X3, $100.00

REPLACEMENT CUTTING TIPS

Order no. Suits Price

SN-10046-CUTTER $12.00

INDEXABLE SINGLE FLUTE

MILLING CUTTER (MT2)

Order no. Suits Price

SN-10071 X1 $62.00

REPLACEMENT CUTTING TIPS

Order no. Suits Price

SN-10071-CUTTER $12.00

COLLET SET

Includes: 3, 4, 5, 6, 8 and 10mm

in MT2. 450g.

Order no. Suits Price

SN-10078 X1 $115.00

COLLET SET (not shown)

Includes: 4, 6, 8, 10, 12, 14 and

16mm in MT3. 1.27kg.

Order no. Suits Price

SN-10126 X2/X3 $146.00

LATHE COLLET SETS

Includes seven collets: 4, 6, 8,

10, 12, 14 and 16mm.

Order no. Suits Price

SN-10148 C3 $230.00

SN-10167 C4 $230.00

SN-10149 C6 $230.00

MILL COLLET & CHUCK SET

Includes: 3, 4, 5, 6, 8 and 10mm

in MT2. 1.3kg.

Order no. Suits Price

SN-10070 X1 $188.00

MILL COLLET & CHUCK SET

(Not shown) Includes: 4, 6, 8, 10,

12, 14 and 16mm in MT3. 1.5kg.

Order no. Suits Price

SN-10037 X2/X3 $199.00

MILL COLLET SET(not shown)

Order no. Suits Price

SN-10139 X0 $209.00

12 PIECE CLAMPING KIT

Order no. Suits Price

SN-10104 X1 $55.00

24 PIECE CLAMPING KIT

(Not shown)

Order no. Suits Price

SN-10105 X1 $73.00

42 PIECE CLAMPING KIT

(Not shown)

Order no. Suits Price

SN-10047 X2/X3 $116.00

SLOTTING ARBOR MT2

Order no. Suits Price

SN-10118 X1 $52.00

SLOTTING ARBOR MT3

Order no. Suits Price

SN-10129 X2/X3 $52.00

DRILL CHUCK

1 to 8mm chuck. Rear of chuck

has internal thread to suit 14 x 1

threaded tailstock.

Order no. Suits Price

SN-10159 C0 $35.00

10 PCE CENTRE DRILL SET

Includes sizes: 1.2mm, 1.6mm,

2.4mm, 3.2mm, 4.76mm and

6.35mm

Order no.

Price

CT-133000 $60.00

KEYLESS CHUCK WITH NO.

2 MORSE TAPER

13mm capacity chuck with no.

2 morse taper shank and B-16

connection to chuck. 800g.

Order no.

Price

HM-513 $39.00

THREAD

CUTTING

GEARS

Imperial set of 9 gears.

Order no. Suits Price

SN-10085 C1 $27.00

50MM QUICK VISE

Order no. Suits Price

SN-10035 X1 $73.00

10MM QUICK VISE

Order no. Suits Price

SN-10036 X2/X3 $94.00

B.

A. 100MM DELUXE

ROTARY TABLE

Includes hold-down kit. 4kg.

Order no.

Price

SN-10094 $349.00

B. DIVIDING PLATE

ATTACHMENT

Order no.

Price

SN-10094-1 $94.00

SWIVEL VISE WITH QUICK

ACTION JAWS - 55mm jaw

width. 3kg.

Order no. Suits Price

SN-10108 X1 $136.00

80mm jaw width. 6.1kg.

Order no. Suits Price

SN-10109 X2/X3 $136.00

ENGINEERS VISE - 130mm

jaw width. 16kg.

Order no.

Price

CT-110203 $111.00

100MM ROTARY TABLE

Includes hold-down kit. 4kg.

Order no.

Price

CT-110240 $167.00

60 For more information & to shop online go to www.carbatec.com.au


Marking & Measuring

SCRIBE & AUTO CENTRE PUNCH

Fitted with tungsten carbide scribe tip and

hardened steel punch tip. 135g.

Order no.

Price

CT-180206 $16.00

TRAMMEL POINTS

One point can be interchanged with a pencil.

Add your own wooden beam to suit any

diameter. Pencil not included. 120g.

Order no.

Price

KU-40 $47.00

CARPENTER PENCILS AND

SHARPENER SET

This set of six carpenters pencils is perfect

for cabinet makers and general woodworkers

alike. The specially designed sharpener,

shapes the rectangular pencils to a fine

point. Much safer than using a utility knife as

many do today! Great value set. 110g

Order no.

Price

CT-CPS $7.00

CARBA-TEC ®

WOODWORKER’S

PENCIL

Supplied with 5.7mm pencil lead.

Overall length of pencil is 130mm. Pencil is

fitted with in-built sharpener. This is a complete

pencil, not a kit. Perfect for marking

boards or general workshop use. 45g.

Order no. Description Price

WP-5009 Pencil with lead $24.00

WP-LEAD Spare leads 2 pack $5.00

A.

B.

JAPANESE MARKING KNIVES

These knives are irreplaceable for use in accurate

marking out of joinery or scoring the

surface prior to machining to prevent breaking

out and chipping. Handcrafted, these

tools are a welcome addition to any workshop

and a true pleasure to use.

Order no. Description Price

A. N-0501 Marking knife & Sheath $31.00

B. JMK-23 Kiridashi Marking Knife $27.00

DOUBLE BEVEL MARK KNIFE

Polished hardened steel, flat one side for

accurate marking. Overall length: 165mm.

Weight: 115g.

Order no.

Price

PF-1228 $30.00

VERITAS ® MICRO

ADJUSTABLE

MARKING GAUGE

Our standard wheel marking

gauge is a great workhorse and excellent

value. Its popularity led to the development

of a second model that incorporates a microadjust

feature. It is similar to our standard

wheel marking gauge with an anodized aluminium

body, brass face, stainless-steel rod

and internal O-ring to keep a constant light

friction force on the rod. It differs in that the

body is slightly longer and is fitted with a twostage

collet that allows micro-adjustment of

the cutting wheel. The knurled thumbscrew

then locks the setting. The hardened steel

wheel cuts wood fibres rather than tears

them, which leaves a clean mark, even on

cross grain. The wheel’s single-sided bevel

also forces the gauge face against the stock,

maintaining accuracy. 170g.

Order no. Description Price

05N35-10 Marking Gauge $55.00

Optional Mortise

15N01-01 gauge heads $14.00

CARBA-TEC ®

MARKING GAUGE

Metric and imperial

scales to 6” and

150mm. Supplied with l e a d

pencil points and steel scribing point. 130g.

Order no.

Price

PW-101 $18.00

CARBA-TEC ® EBONY CUTTING

GAUGE

1 knife, for marking

and cutting

lines, strips of

wood or veneer

and small rebate

with or across grain, brass inlaid face. 310g.

Order no.

Price

MGE-1005 $48.00

CARBA-TEC ® EBONY MORTISE

GAUGE

3 pin, 2 top/1 bottom, micro

adjustable slide,

brass inlaid face.

320g.

Order no.

Price

MGSE-1005 $58.00

VERITAS ® BAR GAUGE HEADS

Simple bar gauges are among the most useful

tools in the shop. They have two primary

purposes, comparing measurements and

transferring measurements. Bar gauges not

only shine in basic measurement transfer,

but are unequalled for inside measurements,

such as for sizing shelves or interior trim for

windows. Simply rip 1/4” slices off standard

3/4” timber to make bars of the length you

want. 10g.

Order no.

Price

05N31-01 $22.00

THREE IN ONE MARKING GAUGE

A wheel gauge, a pin gauge, and a cutting

gauge. The unique swivelling pin/blade

chuck takes either a pin or a blade that locks

in place (after extension is set) using a set

screw in the end of the 4-1/2” gauge stem.

The opposite end of the stem is tapped to

accept a 3/8” diameter wheel cutter. A dozen

spare blades, two hardened steel pins,

a wheel cutter and a hex key are included.

Made in Canada. 90g.

Order no.

Price

05N65-01 $35.00

VERITAS ® BEAM COMPASS HEADS

The head clamps to any material between

16mm and 19mm thick, of any width or

length. The heads are held solidly on the

beam because each clamping knob also operates

a trapped pin that prevents pivoting

of the head when it is clamped in position.

The pins withdraw as the clamping knob is

backed off. Since one of the points has an

eccentric tip, you only need to clamp the

heads approximately; loosen the eccentric

tip and you get up to 1/8” of fine adjustment

by rotating the point. Comes with two hardened

steel points, a pencil, plus the heads.

Order no.

Price

05N50-01 $75.00

Want to see more? See our website for our full range of products.

61


Marking & Measuring

GARRETT

WADE ODD

VERITAS ® BEAM COMPASS

JOB LAYOUT TOOL

VERITAS ® DUAL MARKING GAUGE

Ordinary compasses just don’t cut it in the

We understand that “old timers” used to

With two independently adjustable rods,

shop; a beam compass (or trammel) is

say: “All you needed was a #1 Odd Job,

this gauge lets you set two measurements

much more practical. Using a single beam

a hammer and a saw, and you could build

at once, so you can quickly alternate between

them when transferring or marking

section our compass deals with circles from

anything”. Made by Stanley from 1888 to the

38mm to 600mm in diameter. Additional sections

take you up to 2032mm for circular

early 1930’s, it seems as useful to us today

repetitive dimensions. The hardened steel

as it was then. Made of solid brass and steel,

wheel cutters scribe perfectly at any point

tables, rockers, arches, etc. It has carbidetipped

pins that readily scribe metal as well

it is carefully machined on all sides. It’s an

of their circumference. Since they cut wood

inside mitre and try square, a depth gauge, a

fibres rather than tear, marks are clean,

as wood, although pencil head is usually

scribing tool for arcs and circles. A T-square,

even on cross grain. The cutting wheels

used for scribing wood. A micro-adjust feature

quickly give accurate setting. 2kg.

a depth marking scribe (excellent for marking

out mortises), a plumb level, and the 6”

are oriented with opposing bevels, ensuring

that you can always set the bevel in the

Maple Brass-edged rule (also marked in mm

Order no.

Price waste side of a cut.

on the reverse side).

05N30-01 $165.00 Order no.

Price

Order no. Price

05N70-01 $69.00

VERITAS ® TRANS-

FER LOG SCRIBE

This tool is used for

transferring the contours

of one shape

onto another. This is

what makes it an ideal

log scribe. But this also

makes it an excellent

carpenter’s scribe. It

can translate that notso-straight,

100-yearold

wall profile onto a

cabinet panel, letting

you get a perfect match. The rotatable double-level

post can be adjusted and locked

in any position on either axis. The pointed

end of the steel pin is for compass work; the

blunt curved end is non-marring for transfer

scribing. Usable with any standard pencil,

it comes with a purple indelible pencil that

marks well with light pressure. 525g.

Order no.

Price

05U05-01 $125.00

VERITAS ® SLIDING BEVEL

The obvious benefit of this design is that the

locking mechanism is completely flush, allowing

the bevel to be used on either side.

But more important, it can be used in the

most restricted places since the lever cam

lock can be operated with a single finger.

Since the locking mechanism operates by

compression with no rotary movement, accuracy

is perfect. This is the best sliding bevel

design on the market. Two sizes available.

550g/400g.

Order no. Description Price

05N44-01 Large $69.00

05N44-02 Small $62.00

23N02-01 $39.00

VERITAS ®

TAPERED

GAUGES

This gauge gets

its accuracy by

effectively stretching

any scale for

accurate reading.

These stretch the

standard scale by a

factor of seven. When a thickness difference

of 1/8” is stretched over 7/8” of the scale,

small differences in thickness can easily be

measured with fine accuracy. Used many

ways - for setting fences, router bits and

drill-press stops. 104g.

Order no.

Price

05N38-03 $46.00

VERITAS ® CARPENTER’S GAUGE

Specifically designed to be carried in an

apron or pocket, this is both a direct-reading

compass and a marking gauge, two things

that carpenters frequently need but find hard

to carry. It has a rotatable head, which locks

vertically for use and horizontally for storage

and tip protection. It is direct reading,

for both radius and diameter, in inches and

centimetres. Made of brass, stainless steel

and high-impact ABS, it is 7-1/2” long overall,

and will scribe circles up to 12” diameter.

Patented. Made in Canada.

Order no.

Price

05N36-01 $31.00

VERITAS ®

BEVEL

SETTER

A sliding bevel

is an excellent

tool for transferring

angles but

not for reading

them. This bevel

setter lets you set specific angles (from 0°

to 60° in 1/2° increments) on a sliding bevel

or a workpiece as well as read angles already

set. Both functions are useful for dovetailing,

for machine set-up, for polygon work,

or for accurately fitting a piece in a restricted

location. The etched stainless-steel blade is

3” wide and 7” long. 300g.

Order no. Description Price

05N66-01 Imperial $49.00

05N66-03 Metric $49.00

Sold separately

PRECISION DOUBLE SQUARES

Available with a 100mm (4”) blade or a

150mm (6”) blade, it features a slimmer than

normal stock and an accuracy guaranteed

to be better than 0.001” per inch, exceeding

our regular machinist’s squares. It doubles

as a try square and a precision square,

suitable for both layout work and machinery

set-up and checking. The precision openwork

casting not only provides the accuracy

required but avoids the stock-heavy feel of

most machinist’s squares. The blade locks

securely in any position from full left to full

right. Graduations in imperial. Made in USA.

Order no. Description Price

24N08-01 4” (100mm) $32.00

24N08-02 6” (150mm) $35.00

62 For more information & to shop online go to www.carbatec.com.au


Marking & Measuring

IRWIN MARPLES

ADJUSTABLE BEVEL

Blade length: 300mm.

Order no.

Price

IRW-10503547 $46.00

GROZ DEPTH & ANGLE GAUGE

The ability to measure depth and angles is

combined in this versatile tool. The head is

made from selected steel and has an attractive

black finish. It is graduated both left and

right to 15°, 30° & 45° and the rule can be

set to any of these angles. Tool supplied with

150mm rule. 250g.

Order no.

Price

GZ-1214 $15.00

FLEXIBLE CURVE WITH RULER

This flexible plastic rule is great for making

patterns or marking out curves. Ruler measures

60cm in 1mm graduations. 145g.

Order no.

Price

D-00503 $15.00

MACHINISTS SCRIBE

This scribe is for machinists, engravers,

mechanics and craftsmen. A basic tool for

scribing and marking, these can be used on

metal, glass, plastics and ceramics. Scriber

points are hardened to 55-60 HRC.

Order no.

Price

GZ-03210 $10.00

EMPIRE PROFESSIONAL

COMBINATION SQUARE

Stainless steel blade, made in USA, 300mm

blade length. Used for making accurate 45°

& 90° markings, etc. 128g.

Order no.

Price

IRW-250M $45.00

9” ROSEWOOD SLIDING BEVEL

Steel blade, used for marking and transferring

angles. 170g.

Order no.

Price

CT-260435 $20.00

ANGLE FINDER

For external and internal angles its the most

efficient, innovative, versatile angle finder

available. Made of solid aluminium. Main

arm is 500mm long. 270g.

Order no.

Price

T-103C $22.00

COMBINATION SQUARE SET

A nice quality combination square and reasonably

priced too! Set has metric and imperial

scales with non-reflecting finish, centre

finder, protractor and 90-45° stock. Rule is

300mm in length - in 0.5mm & 1/32” graduations.

Supplied in plastic storage case.

1.4kg.

Order no. Description Price

CSQ-1625 Square Set $62.00

PRECISION ENGINEERING BOXED

SQUARE SET

Includes 150, 100 & 50mm squares. Hardened

steel blades are fixed permanently to

the stock by means of a tapered self locking

rivet which ensures complete rigidity. 725g.

Order no. Description Price

GZ-01012 Set of 3 $73.00

GZ-01000 50mm only $19.00

GZ-01002 100mm only $26.00

GZ-01003 150mm only $29.00

NOBEX

OCTO

SQUARES

A folding square with locking

positions at every 22.5°

détente between 0° and

180°. Each position has a

guaranteed tolerance of ±0.05°.

Order no. Description Price

NBX-OCTO200 200mm $47.00

NBX-OCTO300 300mm $50.00

NBX-OCTO400 400mm $58.00

IRWIN MARPLES

STAINLESS SQUARES

Order no. Blade Length Price

IRW-10503545 350mm $44.00

IRW-10503544 300mm $40.00

IRW-10503543 250mm $37.00

VERITAS ® DOVETAIL MARKERS

For quick, accurate marking of dovetails, a

dovetail marker is the best tool available.

With riding ledges on both sides, this 2” x

2” marker can be flipped over to mark both

slopes of the dovetail. Made from anodised

aluminium. Available in a set of the traditional

ratios: 1:6 for softwood and 1:8 for hardwood,

or the new 14˚ model for thin material

providing stronger interlock. 70g.

Order no. Description Price

05N10-10 Set of 2 $16.00

05N10-12 14° single $9.00

DOVETAIL

SADDLE

MARKERS

For quick, accurate

marking

of dovetails, a

dovetail marker

is the best tool

for the job.

These new

dovetail saddle

markers are

precision machined

at 1:6 and 1:8 angles, the traditional

angles for softwood and hardwood dovetails

respectively. The new 14˚ angle is great for

thin stock providing stronger interlock. The

long legs ensure accurate registration. The

inside corner is relieved to ensure flush seating

even on saw whiskers. Made from anodised

aluminium. 100g.

Order no. Description Price

05N61-04 1:6 Marker $19.00

05N61-05 1:8 Marker $19.00

05N61-08 14° Marker $19.00

Want to see more? See our website for our full range of products.

63


Marking & Measuring

STOP RULE - 30CM

These are handy for layout and machine set-up, because the movable stop provides a reliable

reference point. You can use them to locate saw fences, plot the position of hardware

mounting holes, set the height of a saw blade or router bit, and draw lines parallel to any

flat surface. The stop face is 2” wide for solid registration, and the ruler tip is 7/32” thick to

provide a broad land when using the tool as a height gauge. Graduated in Imperial/metric.

Each scale has a vernier for adjustment to within 1/128” or 0.1mm without parallax

error. Made from chromed steel with a non-glare matte finish, each rule has clear

etched and black-filled markings and a knurled locking knob. 540g.

Order no. Description Price

88N89-12 30cm Stop Rule $29.00

VERITAS ® RULER STOP

The Veritas ruler stop increases the usefulness

of a metal ruler by providing a solid

reference point. It is ideal for setting saw

fences, repeat cuts, etc. To use, slide the

stop over the ruler end and tighten it at the

desired position. Repositioning is fast and

easy. The stop’s anodised aluminium body is

contoured to fit comfortably between thumb

and forefinger, with raised ridges for a better

grip. Accommodates rulers from 7/8” to

1-1/8” wide and up to 0.05” thick. 45g.

Order no.

Price

05N68-01 $21.00

VERITAS ®

MITRE

SADDLE

When working

on small

items such

as picture

frames, a

large combination

square

or try square

can often

be cumbersome.

Not so

with our mitre saddle. The relatively small

size makes it easy to use. Despite its size,

it still has a large reference face (3-1/2” at

the wide end) set at 45°. The leg measures

1” wide by 2-1/4” long. As with our saddle

squares, the sides are machined so that a

line can be easily and accurately transferred

around workpiece corners. The inside corner

is relieved to ensure perfect registration,

even on saw whiskers. Made from anodised

aluminium. 40g.

JAPANESE TRY SQUARE

Made from stainless steel

this instrument combines

the best of both a 90°

and 45° square. The

base is 159mm long

with a height of

100mm. 210g.

Order no.

Price

49N0502 $29.00

MITRE SQUARE

Steel blade, brass edges on both faces.

125mm blade. 95g.

Order no.

Price

CT-260505 $10.00

CARBA-TEC ® 12” HOOK RULE

Put an end to inaccurate measurements.

With a hook on the end of this rule you always

measure from the exact end of the board.

A quick turn of the cam screw releases the

hook for easy sliding to the side or complete

removal. Dual marked scale for imperial or

metric measurements. 75g.

Order no.

Price

HR-1 $11.00

Order no.

Price

05N56-15 $21.00

VERITAS ® SLIDING SQUARE

This cabinetmaker’s square is used to lay

out or transfer measurements quickly and

accurately-you always have an ample reference

face against your work without having

to flop the square. This also simplifies working

in two axes at once (e.g., measuring in

50mm and over 38mm), substantially reducing

the chance of error when measuring and

marking two dimensions. The stainless-steel

blade is 77mm wide and 152mm long, machine

ground on all four edges. The diamond

cut-out in the blade holds a pencil tip in position

and makes it easy to draw lines parallel

to an edge. Accurate and well made. 317g.

Order no.

Price

05N32-05 $49.00

VERITAS ® SQUARE FENCE

A carpenter’s square is frequently needed

just because of its size. The key disadvantage

of such a square (its lack of a supporting

fence ledge) can now be eliminated using

a Veritas square fence. The 8” long anodised

aluminium extrusion can be readily attached

to either the stock or blade of your square

(depending upon intended use) with the two

integral brass screws. The face of the square

fence aligns with the edge of the workpiece

while the weight of the framing square rests

on the material. 250g

Order no.

Price

05N54-01 $32.00

TAPE TIP

Used with any standard tape measure, this

device helps you measure diagonals with

confidence. An angled boss on the underside

hooks securely on a corner while a

measurement is taken. For an inside measurement,

you simply add 1” to the measurement

indicated on the tape measure, while

outside measurements are direct read. To

turn a tape measure into a compass or a

marking gauge, use the centre hole with a

screw or nail for laying out an arc or circle,

or use the V-notch end to locate a pencil for

marking straight lines.

Order no.

Price

50K58-01 $8.00

64 For more information & to shop online go to www.carbatec.com.au


Marking & Measuring

INCRA GAUGE

Designed for multiple needs. This tool should

be in every woodworkers’ shop. Works as

a precision marking gauge, a freestanding

depth-of-cut gauge, a fence alignment

gauge and a centre finder.

Order no.

Price

IN-IG32 $21.00

INCRA CENTRING RULE 300MM

Find the exact centre of any workpiece up to

300mm wide. In addition to top and bottom

micro-fine marking holes at every 1/32” it

also has a built-in protractor with guide slots

at every 45°, 30°, 22.5°, and 5° interval.

Order no.

Price

IN-CENT300M $26.00

INCRA PRECISION BEND RULES

Make dual-surface layouts a snap using the

corner slots shown above. The INCRA Bend

Rule is precisely what you need for layout

and measurement along the edge of a board

or other workpiece. The 90° shape holds it

snugly in place while the two scale surfaces

let you mark and measure on the top, edge

and corners simultaneously! There are even

two vertical end scales for drawing precision

parallel lines relative to the edge of your

work.

Order no. Size Price

IN-BND150M 150mm $23.00

IN-BND300M 300mm $30.00

MECHANICAL PENCIL

(0.5mm)

To suit all Incra precision

rules and layouts. The

micro-fine guide holes on

INCRA rules are designed

for a perfect mark with the

.5mm lead size in your mechanical pencil.

This design elevates the inexpensive .5mm

pencil into a precision marking and layout instrument.

All of the marking holes in INCRA

rules require the .5mm size.

Order no.

Price

IN-IRPENCIL $2.50

INCRA 6” PRECISION PROTRACTOR

We’ve reinvented the protractor by putting

extra long guide slots at every 45°, 30°, 22.5°,

5°, 1° and 0.5° interval to plot any angle with

ease and absolute accuracy.

Order no.

Price

IN-PRO160M $40.00

INCRA PROFES-

SIONAL T-RULES

This is the most versatile

and precise

rule we offer. These

Professional T-Rules

are also available

in 12 inch/300mm

lengths and both

lengths offer Incra’s

patented marking

holes at every 1/16th,

32nd, 64th &1/100th

inch. They have marking holes at every

.5mm as well!

Order no. Size Price

IN-TDPROT06 6”/150mm $34.00

IN-TDPROT12 12”/300mm $45.00

MARKING RULES METRIC 150 & 300MM

The Metric Marking Rules are precisely

what’s needed for accuracy. These rules

offer marking holes at every 1/4 millimetre!

This is unmatched in the industry of marking

rules.

Order no. Size Price

IN-RULE150M 150mm $14.00

IN-RULE300M 300mm $23.00

MARKING RULES 10” DECIMAL/MM

This is our 10” Decimal Inches and Millimetres

Marking Rule. The perfect combination

of traditional English and modern Metric

measuring. This rule offers marking holes

and slots at every 1/20th of an inch and every

1/2 millimetre.

Order no.

Price

IN-RULDM10 $23.00

INCRA 6” X 3” PRECISION X-Y MARKER

Locate and mark the intersecting point of

two perpendicular lines, all in one quick easy

step. This 6 inch by 3 inch Rule with microfine

marking holes at every 1/16” gives you

4,608 different exact positions instantly.

Order no.

Price

IN-XY0603 $39.00

KREG ® MULTI-MARK

This incredibly handy multi-purpose marking

and measuring tool, perfect for a wide variety

of household and jobsite applications.

Order no.

Price

KR-KMA2900 $25.00

300MM BRASS EDGE WOODEN RULE

Order no.

Price

19S11-02 $15.00

BLACK ANODISED ALUMINIUM

ADHESIVE RULE

Ideal for table saws, router tables, custom

made jigs and a hundred other uses. Dual

scale metric 760mm in 1mm increments

and imperial scale 30” in 1/16” increments.

Order no.

Price

76030 $10.00

A.

B.

C.

D.

STAINLESS STEEL RULES

Order no. Description Price

RU-300 A. 300x25mm metric $8.00

RU-150W B. 150x18mm metric $7.00

RU-150 C. 150x13mm metric $7.00

D. Metric & imperial,

150mm fitted with

CR-6 moveable pocket clip $2.00

which doubles as a

depth gauge stop

Want to see more? See our website for our full range of products.

65


Marking & Measuring

VERITAS ® STRAIGHTEDGES

A straightedge is extremely useful for setting

up machines such as planers and jointers.

We offer two types. Both are wide enough

to stand on edge unsupported, so you have

both hands free to make precise adjustments.

Our anodised aluminium straightedges

are 1-3/4” high and 7/16” wide, and will

not rust. The reference edge is machined flat

to within 0.003” over the entire length. Where

extreme accuracy is needed, our solid steel

bar has both edges precision ground flat to

within 0.001” over the entire length.

Order no. Description Price

05N62-00 12” steel $49.00

05N62-01 24” steel $59.00

05N62-03 36” steel $89.00

05N63-03 38” aluminium $55.00

DIGITAL ANGLE RULE

Overall length 400mm, 200mm when folded.

Will measure from 0° to 360° in 0.1° increments.

Digital display can be zeroed at any

location. A hold button to freeze your last

reading is conveniently located near the

readout. Their is also a mechanical lock to

prevent further movement once the desired

angle is reached. 3V CR2032 Lithium battery

included.

Order no.

Price

DAR-200 $35.00

NEW

BMI 8 & 2M TAPES

BMI are amongst Germany’s leading manufacturers.

TwoComp pocket measuring tapes

are high quality with a robust rubber case

made to withstand the rigors of on-site work.

The easy to operate mechanism and belt

clip make this tape a joy to use. 8m length

with mm/cm graduations, 25mm wide blade.

Made in Germany.

Order no. Desc. Price

BMI-QUICKY 2m $10.95

BMI-472841 8m $19.95

VERITAS ®

PRECISION RULE

Easily to become the

most-used measuring

tool in your shop.

An ideal size for cabinet-making,

it has the

accuracy of an engineer’s

square (0.001”

per inch of length).

All four edges are

ground, and both faces

are graduated on the inside and outside

edges. Graduations are in half millimetres on

the 8cm leg and in millimetres on the 15cm

leg.

Order no.

Price

05N35-03 $29.00

VERNIER HEIGHT

GAUGE

Ideal for router and

saw table setups,

etc. Range is from 0

to 180mm. 460g.

Order no.

Price

HG-1 $29.00

DIGITAL

HEIGHT

GAUGE

Displays in metric,

imperial and

fractional imperial.

The generously

over-sized

magnetic base

gives great stability

while the L-

shaped contact

provides reach

over larger router

bits. This tool can

even be used to

accurately set or re-calibrate the analogue

scale on your saw, spindle moulder etc. Max

height is 150mm.

Order no.

Price

DHG-1 $69.00

GROZ

200MM

CALIPER

SET

These are

engineering quality precision instruments.

The set includes one outside caliper, one inside

caliper and one divider. Set is supplied

in vinyl wallet for safekeeping. 700g.

Order no.

Price

GZ-1493 $52.00

DIGITAL ANGLE

FINDER

Why bother measuring

and estimating

angles with a hand

gauge when you can

use this digital tool to

provide quick, precise

angle readings on your tablesaw or any other

woodworking machine! This precision tool

provides digital readings from zero to 180°

to within 0.1° accuracy. Secures to tool being

measured with integral rare earth magnets. 5

minute auto shut-off. Includes battery. 166g.

Order no.

Price

AFB-15 $59.00

HEAVY DUTY

DIGITAL ANGLE

FINDER

Our latest angle finder

that is the HD version

of its predecessor with

a couple of additional

features. This unit is

beautifully made of alloy with magnets fixed

on both sides (instead of the bottom) of the

screen allowing for easy fixture and reading

in all situations. The extra large digital readout

also has arrows that indicate which direction

you are reading ie - left or right. Includes

battery. 250g.

Order no.

Price

AFB-LD220 $79.00

CARBA-TEC ® 200MM DIGITAL CALIPER

With extra large LCD readout. Reads in metric,

imperial and fractional imperial from 0 to

200mm. Stainless steel construction supplied

in plastic storage case. 420g.

Order no.

Price

CDK-200 $59.00

CARBA-TEC ® 150MM DIGITAL CALIPER

Made from durable carbon fibre with large

digital display. Instantly converts from imperial

to metric. Excellent value for money. 125g.

Order no.

Price

PDC-730 $19.00

DIGITAL THICKNESS GAUGE

Capacity 0-150mm. Display can read in millimetres,

inches and fractions of inches with

a push of a button. This unit also features a

very convenient hold function. 160g.

Order no.

Price

ODC-150 $45.00

66 For more information & to shop online go to www.carbatec.com.au


Handtools & Handplanes

JAPANESE NOMI (CHISELS)

HAMLET BEVEL EDGE CHISEL SET

These bevel edge chisels are beautifully

balanced and are well suited for fine joinery

and general cabinetmaking. Overall length:

270mm, blade widths: 6, 13, 19 and 25mm.

Made in UK. 700g.

Order no.

Price

HCT-011 $129.00

IRWIN MARPLES PROFESSIONAL

CHISEL SET

Hand forged and fitted with special handles,

which are guaranteed split proof for life,

this set has 6 chisels, 6mm, 10mm, 13mm,

19mm, 25mm and 32mm. They all come in a

wooden presentation box. 2kg.

Order no.

Price

IRW-10501697 $159.00

CARPENTER’S CHISELS.

Order no. Description Price

MBE-6 6mm $23.00

MBE-9 9mm $25.00

MBE-12 12mm $25.00

MBE-15 15mm $26.00

MBE-19 19mm $28.00

MBE-22 22mm $29.00

MBE-25 25mm $29.00

MBE-32 32mm $31.00

MBE-38 38mm $33.00

MBE-SET Set of 9 $229.00

HAMLET MORTISE CHISELS

Thicker and stronger than a normal chisel to

take the punishment inherent with mortising.

Leather washers absorb heavy blows.

Order no. Description Price

HCT-033 1/4” $49.00

HCT-035 3/8” $49.00

HCT-036 1/2” $49.00

HCT-038 3/4” $55.00

HCT-040 1” $65.00

HSS CORNER CHISEL

Ideal for cleaning of

mortise corners, hinge

rebates, lock recesses,

etc. Blade is 10mm x

10mm. 160g.

Order no.

Price

CC-01 $45.00

A.

B.

A. CHU-USU-NOMI

BEVEL EDGE CHISEL/OAK

Order no. Description Price

JBC-03 3mm, 110g $81.00

JBC-06 6mm, 120g $81.00

JBC-09 9mm, 150g $83.00

JBC-12 12mm, 100g $86.00

JBC-18 18mm, 290g $95.00

JBC-24 24mm, 290g $104.00

JBC-30 30mm, 330g $110.00

JBC-36 36mm, 350g $129.00

B. OIRE NOMI

BUTT CHISELS/OAK

Order no. Description Price

C-5203 3mm, 90g $41.00

C-5206 6mm, 90g $41.00

C-5209 9mm, 90g $41.00

C-5212 12mm, 100g $44.00

C-5215 15mm, 120g $44.00

C-5218 18mm, 130g $44.00

C-5221 21mm, 140g $48.00

C-5224 24mm, 150g $50.00

C-5230 30mm, 170g $52.00

C-5236 36mm, 200g $69.00

C-5242 42mm, 220g $69.00

C. UMEKI-NOMI

DOVETAIL CHISELS/ OAK

Order no. Description Price

JDC-03 3mm, 120g $67.00

JDC-06 6mm, 130g $73.00

JDC-09 9mm, 150g $79.00

JDC-12 12mm, 170g $79.00

JDC-15 15mm, 200g $79.00

JDC-18 18mm, 210g $91.00

C.

PFEIL SWISS MADE BEVEL EDGE

CHISEL SET

This quality set is supplied with hornbeam

handles and presented in a European beech

case. All chisels are made to the same high

standard as Pfeil carving tools. Chisels are

sharp out of the box but may need final honing

depending on your preference. Kit includes:

6, 10, 12, 16, 20 and 26mm chisels.

Order no.

Price

PF-BC-6 $236.00

JAPANESE 6 PIECE ECONOMY

CHISEL SET

Handles are turned from Japanese red oak.

Each of the chisels is hollow ground on the

back to facilitate maintenance of a flat surface

when sharpening. All chisels are made

of laminated steel. Sizes include 6, 9, 12,

18, 24 and 30mm. Overall length of each is

approximately 220mm.

Order no.

Price

JCS-6 $329.00

PFEIL BUTT

CHISEL SET

These butt chisels

from Pfeil are a

pleasure to use. They

feature comfortably

faceted and

contoured European

Locust handles

and blades made

of Swiss alloy tool

steel that is heat treated using

the latest technology for excellent edge

holding. Overall length of each chisel is 6”,

blade length of each is 3-3/8”.

Order no.

Price

PF-SBC-4 $133.00

Want to see more? See our website for our full range of products.

67


Handtools & Handplanes

PFEIL CABINET

MAKERS

CHISELS

Blades are

forged from K

510 steel, hardened

to 60 Rc.

Handles made

of strong, oiled

elm wood from Switzerland. Set includes

six carpenters chisels in a rugged canvas

roll. Widths included: 6, 10, 12, 16, 20 and

26mm.

Order no.

Price

PF-CM-SET-6 $229.00

A.

B.

C.

E.

G. I.

F. J.

H.

L.

D.

KUNZ VENEERING HAMMER

This traditional veneer hammer

features a half round 3-5/8” wide

edge. This perfectly smooth edge

is important for squeegeeing the veneer

down and for smoothing out any glue

bumps. (L) 279mm, (W) 88.9m. 520g. Made

in Germany by KUNZ.

Order no.

Price

KU-104 $67.00

Order no. Description Price

A. CT-260420 Wooden Carpenter’s Mallet $27.00

B. JH-115

$41.00

Hammers with 1 flat end & one round end

C. JH-225 $47.00

D. JHW-48 48mm Traditional Japanese Wooden Mallet $25.00

E. PF-HK70 HornBeam Carver’s Mallet L:280mm Dia:70mm $61.00

F. PF-HK80 HornBeam Carver’s Mallet L:280mm Dia:80mm $82.00

G. PF-HK90 Hornbeam Carver’s Mallet L:280mm Dia:90mm $92.00

H. PF-HK110 Hornbeam Carver’s Mallet L:280mm Dia:110mm $102.00

I. PF-BM-500 Pfeil Brass Mallet L:200mm, Dia: 47mm $92.00

J. PF-BM-800 Pfeil Brass Mallet L:220mm, Dia: 49mm $102.00

K. 05E15-01 Veritas Cabinetmakers Mallet $49.00

L. JHE-300 Economy Japanese Hammer $20.00

M. PU-038 Deadblow Hammers $19.00

N. PU-050 Deadblow Hammers $29.00

A. B. C. D. E. F.

PFEIL ADZE, HATCHETS & AXES

These tools are forged from high quality steel, then hardened and sharpened.

Order no. Description Length Blade Width Price

A. PF-AXE Pfeil Axe 450mm long - $140.00

B. PF-HAT-S Pfeil Sculptor’s Hatchet 280mm 80mm $164.00

C. PF-ADZE-S Pfeil Curved Adze -Small 280mm 50mm $140.00

D. PF-ADZE-F Pfeil Flat Adze 450mm - $140.00

E. PF-ADZE-K Pfeil Straight Adze - Small 280mm 50mm $140.00

F. PF-ADZE-R Pfeil Round Adze 450mm 70mm $133.00

K.

M.

N.

JAPANESE NAIL PULLERS

Both feature a standard paw tip, the JNP-200

has a wafer-thin pry tip for easing apart cabinets

in repair work without marring the wood,

the JNP-270 miniature crowbar has a straight

end. Until you have used these tools, it is difficult

to appreciate their versatility. Removing

moulding, separating mitre joints in frames

and easing off paint seized hardware are just

a few applications. JNP-200 shown.

Order no. Desc. Price

JNP-200 200mm, $31.00

JNP-270 270mm, $29.00

SWIVEL HEAD NAIL PULLER

Features adjustable foot, lockable

at 5 angles (80°, 105°, 130°, 155°

and 180°). The swivel

head is easily adjusted

by way of a springloaded

thumb lever.

An excellent

addition to any toolbox. Specifications:

400mm long, 700g, rated to 150kg. Solid

steel construction with polypropylene handle.

Order no.

Price

NP-55011 $27.00

TRADITIONAL JAPANESE KITCHEN

KNIVES

These functional knives are available in five

different sizes and serve many functions in

the kitchen. Made from high carbon steel

which keeps a far better edge than stainless

steel. When handles give a traditional

presentation, these knives will provide years

of service. These knives will rust - not dishwasher

safe. Listed from left to right.

Order no. Description Price

Fruit & Small fish knife,

A. 60343 264mm $33.00

Fish & Fish bone knife,

B. 60014 289mm $49.00

C. 60252 Vegetable Knife, 300mm $39.00

Heavy Vegetable Knife,

D. 60242 298mm $39.00

Sushi & Meat Knife,

E. 60022 330mm $42.00

68 For more information & to shop online go to www.carbatec.com.au


HONING GUIDE FOR KITCHEN KNIVES

This clever but simple device rigidly holds

your knife at the same repeatable angle ensuring

perfect honing every time. Stone &

knife not incl.

Order no.

Price

KS-36004 $19.00

GROZ COPING

SAW

Throat depth:

120mm, supplied

with one

standard 6” pinned

blade.

Order no. Description Price

GZ-30220 Saw $13.00

GZ-CSBLADE Repl. Blade, 14tpi, 10 pk. $8.00

CARBA-TEC ® JEWELLERS SAW

Order no.

Price

CT-190022 $27.00

8” & 12” TENON SAWS

8”- tooth pitch 1.25mm, blade length 200mm,

kerf 0.9mm. Max. depth of cut 55mm. 12” -

tooth pitch 1.8mm, blade length 300mm, kerf

1mm. Max. depth of cut 77mm.

Order no. Size Price

PAX-D8 8” (shown) $167.00

PAX-T12 12” (not shown) $167.00

PAX 8” GENTS SAW

Beautifully made but inexpensive saw suitable

for dovetailing or trimming. Tooth pitch

1.25mm, blade length 200mm, kerf 0.9mm.

Max depth of cut 45mm.

Order no.

Price

PAX-G8 $48.00

PAX GUITAR FRET SAW

17tpi, 250mm blade length. Kerf 0.53mm.

Order no.

Price

PAX-GS1 $56.00

Handtools & Handplanes

NAKAYA GOLD SERIES PROFESSIONAL NOKOGIRI SAWS

A. DOZUKI FINE PRECISION SAW

Blade length: 150mm, Blade thickness: 0.2mm,

kerf: 0.28mm, Max. depth of cut: 41mm, 30tpi.

Order no. Description Price

WDG-150 Complete Saw $49.00

WDGB-150 Repl. Blade $26.00

B. DOZUKI FINE PRECISION SAW

Blade length: 210mm, Blade thickness: 0.2mm,

kerf: 0.28mm, Max. depth of cut: 45mm, 30tpi.

Order no. Description Price

WDG-210 Complete Saw $60.00

WDGB-210 Repl. Blade $31.00

C. DOZUKI FINE PRECISION SAW

Blade length: 240mm, Blade thickness: 0.3mm,

kerf: 0.45mm, Max. depth of cut: 70mm, 30tpi.

Order no. Description Price

WDG-240 Complete Saw $80.00

WDGB-240 Repl. Blade $41.00

D. KUGIHIKI FLUSH CUT SAW

Blade length: 180mm, Blade thickness:

0.2mm, Kerf: 0.2mm.

Order no. Description Price

KDG-180 Complete Saw $50.00

KDGB-180 Repl. Blade $29.00

E. RYOBA SAW

Blade length: 240mm, Blade thickness:

0.5mm, Kerf: 1mm.

Order no. Description Price

WRG-240 Complete Saw $76.00

WRGB-240 Repl. Blade $37.00

F. RYOBA CROSSCUT SAW

Kerf: 1mm. 10tpi on one side, the other graduates

from 4tpi to 8tpi.

Order no. Description Price

WRG-270 Complete Saw $85.00

WRGB-270 Repl. Blade $41.00

TRADESMAN QUALITY JAPANESE SAWS

A. CROSSCUT FLEXIBLE CARPENTERS

Blade length 300mm, kerf 1.15mm, blade

thickness 0.7mm, t.p.i. 12. 250g.

Order no. Description Price

A.

Z-15011 Complete Saw $52.00

Z-15012 Repl. Blade $27.00

B. CROSSCUT FLEXIBLE CARPENTERS

Blade length 250mm, kerf 0.65mm, blade

B.

thickness 0.50mm 18tpi. 190g.

Order no. Description Price

Z-15006 Complete Saw $47.00

Z-15007 Repl. Blade $25.00

C.

C. FINE TOOTH JOINERY SAW

Blade length 240mm, kerf 0.41mm, blade

thickness 0.30mm, t.p.i. 25. Very fine cut

saw for dovetailing and other extremely precise

D.

accurate cuts.

210g.

Order no. Description Price

Z-7029 Complete Saw $57.00

Z-7030 Repl. Blade $30.00

D. PLUNGE CUT PANEL SAW

Blade length 240mm, kerf 0.53mm, blade

thickness 0.30mm, t.p.i. 17. 210g.

Order no. Description Price

Z-7026 Complete Saw $49.00

Z-7027 Repl. Blade $25.00

A.

B.

C.

D.

E. F.

G.

G. KATABA SAWS

Blade length: 250mm, Blade thickness:

0.5mm, Kerf: 0.8mm, 18tpi.

Order no. Description Price

WKG-250M Complete Saw $56.00

WKGB-250M Repl. Blade $29.00

Blade length: 270mm, Blade thickness:

0.6mm, Kerf: 1.0mm, 13tpi.

Order no. Description Price

WKG-270M Complete Saw $57.00

WKGB-270M Repl. Blade $29.00

E.

E. GENERAL PURPOSE SAW

Blade length 150mm, kerf 0.51mm, blade

thickness 0.30mm, t.p.i. 18. 120g.

Order no. Description Price

Z-7010 Complete Saw $36.00

Z-7011 Repl. Blade $19.00

Want to see more? See our website for our full range of products.

69


Handtools & Handplanes

VERITAS ® FLUSH

CUTTING SAW

Can be used anywhere

that you want to cut off a

projection without damaging

the adjoining face.

Order no.

Price

05K34-01 $26.00

FLUSH CUTTING FLEXIBLE PULL

SAW

Features include: two sided replaceable

blade, zero set on teeth for fast clean flush

trimming of plugs, dowels, etc without damage

to surrounding surface. Specifications:

Blade Length: 150mm, Thickness: 0.40mm,

Kerf: 0.40mm, Pitch: 21 tpi & 17 tpi, Impulse

hardened, tri-edged teeth. Nickel plated for

rust inhibition. 80g.

Order no.

Price

Z-150D $29.00

VERITAS ® MAGNETIC

SAW GUIDES

These saw guides are

manufactured using precision-machined

aluminium

extrusion. Each reference

surface has an embedded

3/4” rare-earth magnet

and is covered with a lowfriction

UHMW pad. The magnets keep the saw aligned as you cut;

the pads allow the saw to slide easily against the reference surface.

The clamp can accommodate material from 1/4” to 1” thick. The

guides can be used with any backless saw that has approximately

0.005” or less of tooth set.

Our dovetail saw is a suitable

companion. With a 2”

x 8-1/2”, 22 tpi blade, the

dozuki tooth form is effective

in both crosscuts and

rip cuts.

MERLIN ECO-10 MOISTURE

METER

Maximum scanning depth is 20mm,

minimum board thickness is 10mm.

Moisture measurement range: 6% to

30%. 170g. Made in Austria.

Order no.

Price

MER-ECO-10 $399.00

Order no. Description Price

05T02-01 1:6 Ratio $62.00

05T02-02 1:8 Ratio $62.00

05T02-05 14° Guide $62.00

05T04-01 90° Guide $59.00

05T02-03 Dovetail Saw $29.00

MOISTURE METER WITH LCD

DISPLAY

This meter works using the electrical resistance

principle and is ideal for comparative

moisture readings on common

timber species and building materials.

Range of 6 to 44% to an accuracy of 2%

in timber. Building materials such as wall

board, drywall, plaster, mortar and concrete

can also be measured to 0.05%

from 0.20% to 2.0%. 127mm long. 130g.

Order no.

Price

CT-EM4807 $69.00

VERITAS ® PREMIUM CROSSCUT SAWS

Filed with alternating bevel angles that sever rather than tear wood

fibres for clean cuts in cross-grain applications, our crosscut saw has

16 teeth per inch. The teeth have 15° rake and bevel angles.

VERITAS ® PREMIUM DOVETAIL SAWS

Features rip-cut teeth that have a rake angle of 14° and an included

angle of 60°. The 14 tpi dovetail is most efficient with stock thicker

than 1/2”, while the 20 tpi version is best for stock under 1/2” thick.

VERITAS ® RIP & CROSSCUT CARCASS SAWS

Typically used to cut joints in drawer runners, dividers, and stretchers.

The 12 tpi rip saw has a 10° rake angle and an included angle of

60°. The 14 tpi crosscut saw has a rake angle of 15° and an included

angle of 60°.

VERITAS ® GENT’S SAWS

Intended for those who wanted good-quality tools for occasional

work. Our Gent’s saws have a 200mm long high-carbon blade that is

just 0.015” thick with 0.003” of teeth set per side. The 20 tpi rip saw

has a 14° rake angle and a 60° included angle. The teeth on the 22tpi

saw have 15° rake and bevel angles and an included angle of 60°.

Both saws have a cut depth of 40mm.

Order no. Description Price

05T06-01 Veritas Premium Crosscut Saw $79.00

05T05-05 Veritas Premium Dovetail Saw 20tpi $79.00

05T05-01 Veritas Premium Dovetail Saw 14tpi $79.00

05T07-05 Veritas Rip Carcass Saw 12 tpi $79.00

05T07-01 Veritas Crosscut Carcass Saw 14 tpi $79.00

05T10-01 Veritas Gent’s Saw (Rip) 20tpi $85.00

05T10-05 Veritas Gent’s Saw (Crosscut) 22tpi $85.00

MERLIN WS13HD MOISTURE

METER

Maximum scanning depth is 20mm,

minimum board thickness is 1.3mm.

Moisture measurement range: 4% to

20% with high accuracy, up to 40%

with lesser accuracy. This instrument is

made especially for harder denser timbers.

180g. Made in Austria.

Order no.

Price

MER-WS13/HD $579.00

MERLIN 2-IN-1 PIN TYPE POCKET

MOISTURE METER

Single range moisture meter 5% to 50%

in wood products and 1.5% to 33% in

building materials such as brick or plaster.

Working on the electrical resistance

principle this instrument is ideal for

comparative moisture readings on most

common wood species. 75g. Made in

Austria.

Order no.

Price

MER-MOISTEC $159.00

70 For more information & to shop online go to www.carbatec.com.au


Handtools & Handplanes

RIVER CITY TOOLS ®

MULTIFUNCTION TOOL

Our Multi-Tool features the following: pliers,

wire cutters, 5 flat various size screwdrivers,

4 Phillips screwdrivers, 5 Allen keys, 1 socket,

small knife, large knife, file, fish-scaler, hook

remover, bottle opener/can opener. 460g.

Order no.

Price

LMT-1 $26.00

BOX CUTTER UTILITY KNIFE

Fitted with two blades, one a

utility blade, the other is

a box cutter with replaceable

Stanley style blade. Also

comes complete with

a stainless steel belt

hook. 230g.

Order no.

Price

UKB-2B $13.00

CLASSIC AUTOLOADER

Sick and tired of never having the right

screwdriver handy? The Autoloader can

be loaded with any 6 bits YOU want. Once

loaded, changing between bits is as simple

as pulling the handle back, selecting the desired

bit and pushing the handle forward.

Made in Canada. 195g.

Order no.

Price

AL-CLASSIC $29.00

GROZ LEATHER PUNCH

Professional quality pliers, each punch locates

exactly in position locking in place with

the prawl and ratchet mechanism. Spring

loaded revolving head incorporates 6 punches

of sizes; 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4

mm & 4.5 mm. 280g.

Order no.

Price

GZ-31600 $20.00

POCKETWRENCH II TM .

This is the next best

thing to a real

wrench! Stainless

steel, 1/8”

thick, 4” long,

and 1” wide – perfect for a pocket or tool

pouch. It will tighten or remove nuts from 3/16”

to 11/16” or 5mm to 17mm. Made in USA.

Order no.

Price

25K17-01 $16.00

CHINESE SCISSORS (SET OF 4)

This style of scissors has been made for over

300 years in China. Hand forged, they have

a hard steel layer, laminated to a softer iron

backing that supports the more brittle hardened

layer. They come razor sharp. Their

blade strength and sharpness make them

useful in the shop, the garden or the kitchen,

or for crafts. Overall lengths are 140 to

216mm. An excellent buy in traditional tools.

Order no.

Price

45K10-10 $15.00

PRO SEAM

RIPPER KIT

The Pro kit includes

two sharpend

stitchpicker

blades

for starting a

seam, and four safe-tip rippers

that complete the job without snagging

the fabric. Suitable for anyone who does

sewing or handy crafts. Made in Canada.

Order no.

Price

09A01-20 $19.00

VENEER ROLLER

A heavy duty, high quality veneer

roller. A cranked-neck solid steel

shaft allows you to apply heavy

pressure while keeping your

hands free of the workpiece. Overall length:

350mm with a 100mm deep offset crank

shaft.

Order no.

Price

CT-ROLLER $25.00

VERITAS ® CORNERING TOOL

Cut a fixed radius curve on an edge. Our cornering

tools have a different radius cutter at

each end. One cuts a 1/16” and a 1/8” radius

and the other cuts

a 3/16” and 1/4”

radius. Set comes

with a sharpening

system which includes

four different

cutting radii,

silicon carbide paper,

and a holding

wedge. 150g.

Order no.

Price

05K50-30 $46.00

VERITAS ® BEADING TOOL

Hand beading, fluting or reeding in hard or

soft woods is an easy matter with the new

VERITAS ® beading tool. Using standard cutters

or one that you custom shape, you can

put fine detail in furniture quickly and accurately.

The fence has two mounting locations

to provide up to a 1” (25.4mm) blade offset

and is positional to expose one of three

bearing surfaces: flat for straight and convex

applications, curved for slightly concave

and waved edges, and bullnose for more

complex profiles. The handles are African

rosewood with brass fittings. Supplied with

a 3/32” radius single-point cutter and five

blank cutters.

Order no. Description Price

05P04-50 Beading Tool $95.00

Optional Cutters

05P04-02 Single Point Cutter $7.00

05P04-03 Bead Cutters (3) $15.00

05P04-04 Flute Cutters (3) $15.00

05P04-05 Reed Cutters (2) $14.00

05P04-06 Blank Cutter (1) $4.00

VERITAS ® MAGNETIC

CORNER CHISEL. Designed

for squaring off the

corners of routed hinge

gains. The 3/8” square

blade is precision ground

made of long-wearing

A2 tool steel, hardened

to Rc60. Two embedded

rare-earth magnets hold

the chisel squarely in

place. A tap on the chisel

cuts the corner square

and flush with the routed edges. 300g.

Order no.

Price

50S01-01 $49.00

CAMELLIA OIL

Used for generations as an effective

rust inhibitor for all tools. Just

apply a tiny amount with a rag.

240ml (100g).

Order no.

Price

CAM-1 $24.00

Want to see more? See our website for our full range of products.

71


Handtools & Handplanes

WOODWORKERS STARTER SET IN

WOODEN BOX

Set includes No. 4 (250mm) smoothing

plane, low angle (175mm) block plane,

160mm bevel, 210mm brass inlaid mortise

gauge and 280mm brass edged try square.

Perfect for every beginner. Presented in

wooden storage case. 4.6kg.

Order no.

Price

CT-290115 $159.00

GROZ BLOCK

PLANES

Cast Iron

body and

lever cap

for durability. Both

planes have lateral

adjustment levers. Ground bases for

accuracy in use. Planes require final tuning

before use. The 220N has a 178mm overall

length, 41mm cutter idth and 21° blade angle.

The 605N has a 157mm overall length,

35mm cutter width and 13° blade angle.

Order no.

Price

GZ-220N $52.00

GZ-605N $52.00

GROZ #4 & 5 SMOOTHING PLANES

Fully ground soles and

sides, hardwood handles,

ductile cast iron

construction and tool

steel blades. Planes require

final tuning

before use. #4

has a 245mm

overall length,

62mm sole width and 50mm blade

width. The #5 has 355mm overall length,

62mm sole width and 50mm blade width.

Order no. Description Price

GZ-39701 #4 Bench Plane $52.00

GZ-39702 #5 Bench Plane $73.00

GROZ #7

JOINTING

PLANE

Fitted with hardwood handles

and brass knobs. 75mm wide x 560mm

long. 4.2kg. Plane requires final tuning before

use.

Order no.

Price

GZ-39704 $132.00

A. B.

LEE VALLEY PALM PLANES

These little beauties are made in Canada

and are expertly cast and ground. The ‘Squirrel

Tail’ planes (A and B) are similar to the

old Stanley #100 and #100-1/2. ‘A’ is a flat

plane while ‘B’ is curved with a 1-1/2” radius

side to side and a 12” radius front to back.

These two are 3-3/8” wide with a 1” blade - a

true pocket plane!

Order no. Description Price

A 15P10-10 Flat ‘Squirrel Tail’ Block Plane $57.00

15P01-02 Repl. Flat Blade $15.00

B 15P01-01 Flat ‘Little Victor’ Block Plane $53.00

15P01-02 Repl. ‘Little Victor’ Blade $15.00

C 15P10-20 Curved ‘Squirrel Tail’ Block Plane $63.00

15P10-21 Repl. Curved Blade $22.00

A. B.

A. KUNZ CAST IRON POCKET PLANE

B. KUNZ BEAVER TAIL POCKET

PLANE Plane length 85mm and cutter

width 24mm for both.

Order no.

Price

A KU-101 $30.00

B KU-100 $30.00

VERITAS ® FLUSH PLANE

This plane is ideal for flush trimming of projections

such as glue lines, laminate edges,

plugs, etc.

Order no.

Price

05P20-01 $49.00

VERITAS ®

LOW-ANGLE

SMOOTHING

PLANE

A low-angle

s m o o t h i n g

plane has three

key uses. It is

used to smooth large surfaces, preferably

taking a diagonal cut, partly across and

partly along the grain. With its generous side

wings, it is ideal for shooting mitres. Finally,

it is excellent for end grain work of any kind.

Order no.

Price

05P25-01 $279.00

C.

VERITAS ® BULL-

NOSE PLANE

This tool is two planes

in one, serving as either

a bullnose or a chisel

plane. An adjustable

set screw in the toe acts

as a stop to accurately

set the mouth opening.

Order no.

Price

05P42-01 $199.00

VERITAS ® SMALL

SHOULDER

PLANE

Designed to seat

nicely in the hand, our

small shoulder plane

is easily controlled

using a one-handed

grip. A 1/2” wide x

6-1/4” long ductile

cast iron body is accurately

machined flat and square.

VERITAS ® MEDIUM SHOULDER PLANE

A versatile tool, our medium shoulder plane

can be used on end grain. The 11/16” wide

x 7” long body makes it ideal for rebate and

dado work.

VERITAS ® LARGE SHOULDER PLANE

1-1/4” wide x 8-1/2” long and mass that bring

both authority and precision to larger work.

Order no. Description Price

05P47-01 Sm. Shoulder Plane $209.00

05P41-01 Med. Shoulder Plane $219.00

05P43-01 Lg. Shoulder Plane $259.00

VERITAS ® SMALL BEVEL-UP BENCH

PLANE

With a size comparable to a #3 bench plane,

this low-angle smoother is 228mm long,

58mm wide and weighs only 1.25kg. The

machined and surface ground ductile cast

iron body has a 12° bed angle and a moveable

toe fully enclosed by the body casting.

The locking front knob controls the toe to set

the mouth opening.

Order no.

Price

05P39-01 $299.00

VERITAS ® SKEW RABBET PLANE

Also known as a moving fillister, this rabbeting

plane cuts quickly and quietly, avoiding

the set-up, noise and dust associated with

power tools.

Order no.

Price

05P45-01 $309.00

72 For more information & to shop online go to www.carbatec.com.au


Handtools & Handplanes

F.

G.

A.

B.

C. D. E.

A. VERITAS ® LOW ANGLE JACK

The Veritas low-angle jack plane is an exceptionally

versatile plane. It excels at end-grain

work, is great for shooting, and also works

well for smoothing.

Order no.

Price

05P34-01

$319.00

B. VERITAS ® BEVEL-UP JOINTER

The Veritas low-angle jointer is the latest and

largest member of our bevel-up bench plane

family. The bevel-up blade configuration results

in a plane that is versatile and straightforward

to use. An adjustable throat plate allows

a wide range of mouth adjustment.

Order no.

05P37-01

Price

$379.00

See website for Replacement Blades

C. VERITAS ® BEVEL-UP SMOOTHER

We have combined the generous width and

weight of a dedicated smoother with the versatile

inner workings of a low-angle bevel-up

plane.

Order no.

Price

05P36-01

$299.00

D. VERITAS ® #4 SMOOTHER

The #4 smooth plane is the most commonly

used bench plane. It is the ideal size for general

smoothing and finish work.

Order no.

05P26-01

E. VERITAS ® #4-1/2 SMOOTHER

An excellent plane for the final smoothing os

a surface already worked by other planes or

a thickness planer.

Order no.

05P23-01

Price

$299.00

Price

$299.00

F. VERITAS ® #5-1/4 BENCH PLANE

Our #5-1/4W differs from the original in

many ways, mainly, ours has a wider blade

and the mouth is 4-3/8” behind the nose. For

better accuracy, an extra-long sole in front of

the blade makes it easier to keep the sole

flush to the wood, when starting a cut.

Order no.

05P24-01

G. VERITAS ® #6 FORE PLANE

One of our largest bench planes, the #6 fore

plane is ideal for smoothing and flattening

large surfaces, such as panels, table tops

and workbench tops. The long sole ensures

accuracy.

Order no.

05P28-01

Price

$299.00

Price

$319.00

A.

B.

12° bed angle

VERITAS ® STANDARD AND LOW

ANGLE BLOCK PLANES

These block planes stand apart from the

rest. The tall side wings are ideal for shooting,

and finger grips in the sides improve

control. The combined blade advance and

lateral adjust is the most sensitive, accurate

adjustment mechanism available. Two

guide screws prevent blade shifting. Both

planes are machined to exacting standards,

with milled sides and sole that are surface

ground to a fine finish.

Order no. Description Price

05P22-30 Standard $189.00

05P22-01 Low Angle $189.00

C.

VERITAS ® SKEW BLOCK PLANE

This plane excels at trimming rabbets, working

end grain, or making final jointing cuts

on boards. The blade is skewed at a 15° angle,

which makes cutting easier, either with

or across the grain, and helps pull the fence

tight against the work. Available in left and

right hand models.

Order no. Description Price

A. 05P76-01 RH Skew Block Plane $249.00

05P76-02 RH Repl. Blade $35.00

B. 05P77-01 LH Skew Block Plane $249.00

05P77-02 LH Repl. Blade $35.00

C. 05P76-62 Opt. Fence Rod $8.00

VERITAS ® APRON PLANE

This small, low angle block plane is ideal for

trim carpentry. It is half the weight of a standard

block plane, a big plus if you carry it in an

apron all day. Comes with a lapped 25° bevel

blade made of A2 tool steel. A split-leather

holster with brass fittings is sold separately. It

keeps your apron plane close at hand while

working and protects it from damage.

Order no. Description Price

05P27-02 Apron Plane A2 $129.00

67K73-16 Leather Holster $29.00

VERITAS ® BLOCK PLANES

Made to exacting standards and features newly refined stainless-steel hardware.

178mm x 44.5mm. 12° Bed angle. A.

Order no. Description Price

A. 05P70-01 DX60, Made from ductile iron $239.00

B. 05P70-11 NX60, Made from corrosion resistant ductile iron $399.00

B.

Want to see more? See our website for our full range of products.

73


Handtools & Handplanes

VERITAS ® DETAIL RABBET PLANES

These slender pocket-size planes allow fine,

controlled cuts in areas you could ordinarily

trim only with a chisel. With very narrow

soles, they are also useful for cleaning dados

or grooves. Available in five widths: 1/4”,

5/16” (8mm), 3/8”, 6mm and 10mm.

Order no. Description Price

05P75-03 1/4” Imperial $79.00

05P75-06 5/16” Imperial $79.00

05P75-08 3/8” Imperial $79.00

05P75-01 6mm Metric $79.00

05P75-10 10mm Metric $79.00

VERITAS ® IRON EDGE TRIMMING

PLANE

Edge-trimming planes work end grain or

give final trimming cuts on jointed boards,

for smooth edges exactly 90° to the face.

This plane is cast in durable ductile iron for

everyday use, and is available in right and

left-hand models.

Order no.

Price

05P03-01 $139.00

B.

VERITAS ® ROUTER PLANE

With a ductile cast iron body accurately machined

and ground flat to our high standards,

the Veritas router plane is ideal for cutting

dadoes and grooves, for inlay or intarsia

work, or for cleaning out areas to a precise

depth. Blade depth is set by a fine screw

feed, and a positive locking depth stop sets

depth of cut. A spring-loaded collar holds

the blade, allowing easy blade adjustment

and removal.

Order no.

Price

A. 05P38-01 $209.00

A & B 05P38-20 $229.00

A.

VERITAS ® SCRAPING PLANE

This is the ideal tool for final smoothing, especially

when you have to deal with highly

figured wood or reversing grain. Tearout is

virtually eliminated with the cutting action

of the included scraping blade. Blades are

2-7/8” wide and are hardened to Rc48-51.

The sole of the plane is surface ground for

accuracy.

Order no.

Price

05P29-01 $239.00

A.

C.

VERITAS ® SMALL SCRAPING PLANE

Designed for one handed use, this small

scraping plane has an articulated arm rest

for a comfortable grip. The 2” wide, 0.040”

thick, high carbon steel blade occupies the

full width of the plane body permitting clean,

accurate cutting.

Order no.

Price

05P29-50 $159.00

VERITAS ® SMALL ROUTER PLANE

A versatile tool for fine work, particularly on

narrow material or confined areas, this plane

excels at work requiring small recesses,

grooves or dados. The comfortable, accurately

machined ductile cast iron body has a

lapped sole for accuracy.

Order no.

Price

05P38-50 $65.00

B.

D.

VERITAS ® DETAIL PALM PLANES

With a height-adjustable palm rest for better

in-hand registration, these miniature planes

are easily manoeuvred and permit fine, controlled

cuts. The investment-cast steel body

has a 45° bed angle and a fixed mouth, and

uses a brass retention screw to secure the

included 30° bevel A2 blade (0.06” thick by

9.5mm wide). The soles are approximately

38mm long by 15mm wide.

Order no. Size Price

05P90-01 A. Flat $72.00

05P90-05 B. Double Convex $72.00

05P90-09 C. Convex $72.00

05P90-13 D. Concave $72.00

IBEX VIOLIN MAKER’S PLANES

Featuring curved bottoms, precision cast

in silicone bronze. Body lengths of 25mm,

30mm, 46mm with blade widths of 8mm,

10mm, 12mm and 18mm respectively.

Order no. Size Price

50501 25mm, round base $83.00

50502 30mm, round base $83.00

50503 36mm, round base $90.00

50553 36mm, flat base $94.00

50504 46mm, round base $100.00

50505 60mm, round base $121.00

VERITAS ® PLANE SACKS

Made from a silicone-treated knit cotton that

resists moisture, these sacks are ideal for

plane storage. Sacks are blade in colour with

the VERITAS ® logo printed on them.

Order no. Size Price

05P61-07 7-1/2” $13.00

05P61-12 12-1/2” $14.00

05P61-16 16” $15.00

05P61-25 25” $16.00

74 For more information & to shop online go to www.carbatec.com.au


VERITAS ® CABINET

SCRAPER

Used in place of a much

heavier belt sander, it can

clean a dirty workbench

top, remove dried glue an

smooth a panel or tricky

grain table top efficiently,

leaving behind a surface free of tear-out,

digs or gouges. The blade is 2-3/4” wide

with both edges ground at 45° so that the

tool has two cutting edges prepared at once.

The sole is surface ground for accuracy.

Order no.

Price

05P32-05 $85.00

VERITAS ® SUPER HARD SCRAPER SET

Most scrapers are sheared from spring steel,

hardened to Rc38-42. These scrapers are

harder - Rc48-52 - and hold an edge longer.

They are also fully milled to a square, sharp

90° ready for immediate use on fine work.

Two are 2” x 6”, two are 2-3/8” x 6”.

Order no.

Price

05K30-10 $22.00

Handtools & Handplanes

VERITAS ® VARIABLE

BURNISHER

Woodworkers have difficulty

putting the optimum

hook on a scraper

for the job at hand.

Our Variable Burnisher

solves the problem and makes burnishing

easy. The unit has a carbide rod in a brass

hub at an angle. A dial on the face of the

body lets you set any angle from 0° to 15°.

220g.

Order no.

Price

05K37-01 $48.00

VERITAS ® CARBIDE BURNISHER

We made this carbide burnisher specifically

for curved scrapers and fine detail scrapers.

The 1/8” diameter polished carbide rod

projects 3/4” from the hardwood handle,

ideal for one-handed use. 100g.

Order no.

Price

05K20-30 $10.00

VERITAS ® TRI-BURNISHER

Designed to perform the functions of round,

triangular, and oval burnishers, this one has

a mirror finish to guarantee smooth hooks on

scrapers. The unique shape lets you apply

the right amount of pressure at each stage

of the process. Hardened to Rc 62 - 64, the

burnisher is much harder than the scrapers it

is used on. 120g.

Order no.

Price

05K32-01 $46.00

VERITAS ® SCRAPER HOLDER

Scraper bow is adjusted by the centre brass

knob. Takes the fatigue out of using straight

scrapers. Suitable for push or pull action. 6”

Scraper included. 250g.

Order no.

Price

05K33-01 $49.00

VERITAS ® SUPER HARD CURVED

SCRAPERS

These three piece scraper sets cover a variety

of scraping jobs. The concave/convex

ends are excellent for bowl or spindle work

while the flat is for general purpose jobs. Two

thicknesses are available: 0.6mm for regular

scraping, 0.4mm for finer work.

Order no. Description Price

05K20-10 0.6 thick $19.00

05K20-20 0.4 thick $19.00

KUNZ SPOKESHAVES

Order no. Desc. Blade Width Price

KU-50 Convex 52mm $41.00

KU-55 Concave 54mm $41.00

KU-63 Curved 45mm $25.00

KU-64 Flat 45mm $29.00

KU-51A Flat Face 52mm $33.00

A.

VERITAS ® SPOKESHAVES

Our spokeshaves have been designed for

smooth, effective, chatter free shaping of

chair spindles, panel edges, paddles, tool

handles, and all other kinds of freehand

shaping. All three spokeshaves have a 1/8”

(0.125”) thick A2 tool steel blade, seated at

45° to the sole. Each tool is 260mm long

overall.

Order no. Description Price

05P33-01 Flat $119.00

05P33-03 Round $119.00

05P33-11 Concave $119.00

PAX CONVEX SCRAPER SET

Made in Sheffield, this two piece set has

10 radii: 1/4”, 3/8”, 1/2”, 3/4”, 5/8”, 7/8”, 1”,

1-1/8”, 1-1/4” & 1-1/2” dia.

PAX CONCAVE SCRAPER SET

Made in Sheffield, this two piece set has

10 radii: 1/4”, 3/8”, 1/2”, 3/4”, 5/8”, 7/8”, 1”,

1-1/8”, 1-1/4” & 1-1/2” dia.

Order no. Description Price

A. PAX-CC Convex $24.00

B. PAX-CV Concave $24.00

B.

VERITAS ® LARGE SPOKESHAVE

This large spokeshave provides all the utility

of regular spokeshaves - a tight mouth, simple

blade depth adjustment and very precise

machining - but in a larger more robust package

for quick controlled work. The integrated

thumbwheels allow quick and repeatable

blade depth and skew adjustment, and two

shims are supplied to enable mouth opening

adjustment to suit your work requirement.

Order no.

Price

05P33-90 $125.00

Want to see more? See our website for our full range of products.

75


Sharpening

Guide

body►

stone not

incl.

◄Registration Jig

VERITAS ® MK II SHARPENING SYSTEM

The key to consistent, fast honing is repeatability

- and this guide delivers it in spades.

It will set bevel angles from 15° to 54° and

a range of back bevels from 10° to 20°. It

can accommodate chisels as narrow as

1/4” and blades as wide as 2-7/8” and up to

1/2” thick. The registration jig slides onto the

guide body, centring and squaring the blade

with an integral fence. The blade stop has

positions for preset bevel angles. A threeposition

eccentric roller, allows you to hone

micro-bevels quickly and accurately with a

turn of a knob. Made from zinc alloy, brass

and steel. This means quick, accurate sharpening

and repeatable results. 810g.

Order no.

Price

05M09-01 $85.00

Attach jig to honing guide to

set bevel and skew angles.

VERITAS ® SKEW REGISTRATION JIG

This jig locks into the MK II honing guide to

make quick work of setting both skew and

bevel angles (left or right hand) of chisel and

plane blades. The skew angle graduations

cover the range of 10° to 45° in 5° increments,

and there are additional marks

(18°, 22°, 28°) to cover the angles of popular

skew plane blades. The base has four distinct

tracks providing four bevel angle settings:

20°, 25°, 30° and 35°.

Order no.

Price

05M09-03 $39.00

VERITAS ®

CAMBER

ROLLER

ASSEMBLY

The Veritas MK II

honing guide has been

designed to produce accu- r a t e

and repeatable square bevels on chisel and

plane blades. However, when using smoothing

planes on large, flat surfaces, it is desirable

to hone a camber into the blade edge.

This allows the cut to taper out on each side.

Simply replace the standard roller assembly

with the camber assembly and hone.

Order no.

Price

05M09-05 $30.00

HONING GUIDE

Holds your chisel or plane iron in a vice like

grip at any normal sharpening angle. Rolls

on a hardened steel wheel. Holds irons from

2mm to 65mm. 260g.

Order no.

Price

MJ-817 $13.00

PLANE & CHISEL SHARPENING GUIDE

Similar to honing guide shown elsewhere

but, with heavy duty brass roller. Brass roller

assembly is removable which allows this unit

to be used on bench grinders equipped with

mitre slots. Holds blades from 9.5 to 65mm.

300g.

Order no.

Price

CSG-21 $19.00

DIAMOND BLADE

HONE

Holds 400 and 600

grit diamond stones

for sharpening HSS

or tungsten carbide

jointer and planer

blades. Weighs approximately

80g.

Order no.

Price

K-10-D $39.00

DRILL DOCTOR

Professionally sharpens standard twist drills

from 2.5 to 13mm. Suitable for tungsten carbide,

cobalt, high speed steel and tin coated

drills. Powerful 240v motor makes sharpening

a breeze! Free video included with every

kit. 1.66kg.

Order no.

Price

DD360X $289.00

VERITAS ® BEVEL GAUGE

Half the secret of sharpening is the control

of blade geometry. Nothing is handier than

a bevel gauge for quickly checking the grind

angle of chisels, plane blades, turning tools,

etc. A quick check confirms the angle last

used for grinding or honing so that the edge

geometry can be maintained. Our bevel

gauge has seven individual slots that will

measure the most commonly used angles

from 15° to 45° in 5° increments. Your eye

is a fine instrument; it can easily interpolate

other angles in the range, angles like 24° or

26°. The slots on the gauge are about 3/4”

deep for good registration. The pocket-sized

disc is 2-1/2” in diameter with a centre hole

for hanging it on a nail. Made of solid brass,

which will not damage a honed edge. 20g.

Order no.

Price

50K09-01 $12.00

VERITAS ® BLADE

HONING

COMPOUND

This compound is

the most effective

on the market. Chromium

oxide admixed

with other fine abrasives gives the best combination

of cutting speed and fine, mirror finish

with a light wax film. It will adhere well to

felt, leather, or wood. 180g.

Order no.

Price

05M08-01 $14.00

CARBA-TEC ®

CHISEL

GRINDING JIG

For grinding a wide

range of tools. Ideal

for woodturning

gouges, scrapers,

parting tools, and

chisels (the adjustable

quadrant positions

the tool, eg skew chisel at the correct

angle). Helps produce a hollow ground bevel

which can be honed to a razor sharpness.

Order no.

Price

CJ-04 $39.00

DIAMOND DISC SHARPENER

50mm x 1mm disc with 400grit

diamond surface on one side.

Ideal for sharpening or deburring

router bits, chisels.

Fitted with 6mm shaft. Max.

speed: 3,000rpm. 40g.

Order no.

Price

DWG-1 $31.00

76 For more information & to shop online go to www.carbatec.com.au


Sharpening

JAPANESE WATERSTONES

Order no. Grit Use Price

WS-300 300

For fast material removal. Great for restoring old

chisels. 207x66mm. $37.00

WS-800 800

Very useful for taking out nicks or changing

bevels. 207x66mm $37.00

WS-1200 1200

Perfect for initial bevel grinding prior to finishing.

207x66mm. $37.00

WS-4000 4000 Gives a very sharp finish on all tools. 177x50mm $37.00

WS-6000 6000 For a razor sharp polished finish. 185x63mm. $41.00

WS-8000 8000

For a mirror finish edge, nagura stone

incl.210x73mm. $125.00

Used for mirror polishing, nagura stone incl.

WS-10000 10000

205x76mm. $136.00

WS-16000 1000 1000 grit for grinding out imperfections, and

/6000 6000 grit for razor sharp finish. Double sided. $73.00

For cleaning ingrained surface scum from ws.

NGS-1

72x23x19mm. $13.00

For flattening waterstones that have become

WSF-150 ’dished’ after prolonged use. Measures 150 x $25.00

50 x 27mm.

A.

A.

A. FORMED WHETSTONES

Concave forms. Ideal for honing carving chisels. Also included is one

double sided convex slip stone for inside gouges, etc.

Order no. Description Price

PWS-1000 1000 grit (set of 2) $37.00

PWS-4000 4000 grit (set of 2) $37.00

TRADITIONAL WATER SLIP STONES

These slip stones are made to our design and to a specified hardness

to best combine cutting speed and durability. Widely used for

sharpening firmer gouges, scribing gouges, carving tools and radiused

blades, these stones can be used on nearly any curved cutting

edge of simple or compound shape. Available in 3 grit sizes

Order no. Description Price

Fastest cutting and is used for establishing a basic

B. 60M90-01

edge, 1000grit, 95g

$18.00

B.

C.

D.

VERITAS ® LAPPING

PLATE

Measuring 12” x 4-1/8” x

1-1/8” high and weighing approximately

6kg, this is one

substantial lapping plate!

Made from an iron chosen for

its dimensional stability and

consistency the bottom and

sides are machined, and the top is ground flat to with-in 0.001” over

the surface.

Order no. Description Price

05M20-20 Lapping Plate $109.00

05M20-07 90# Lapping Grit $6.00

05M01-04 180# Lapping Grit $6.00

05M01-05 280# Lapping Grit $6.00

05M01-06 400# Lapping Grit $6.00

05M01-07 600# Lapping Grit $8.00

VERITAS ® STONE POND

The complete system to

store, use, and maintain water

stones up to 12” long. Stones

can be stored, ready for use,

in a stand that clamps them

and provides a base for lapping.

There is ample space

for three stones. The lapping

system is a glass plate, a

sheet of PSA-backed plastic laminate, and 90x silicon carbide. 2.1kg.

Order no.

Price

05M20-06 $85.00

VERITAS ® LAPPING KIT

Silicon carbide is ideal for flattening

oil, water stones, plane

bottoms and blades.Sprinkle

the grit on a piece of glass or

a steel lapping plate, add oil

or water (as required), and

lap the item flat. This easy

process lets you keep all of

your stones dead flat. Kit includes

five 2 oz containers of

90x, 180x, 280x, 400x and 600x and instructions. 365g.

Order no.

Price

05M01-01 $34.00

DIAMOND FILE SET

Set of 10 files, supplied

in plastic sheath. Length:

160mm, 210g.

C. 60M90-02

D. 60M90-03

Most useful combination of cutting speed, hardness,

and degree of finish obtained. It cuts quickly, but still

leaves a tool with a near-mirror finish superior to that

achieved with a hard Arkansas slip. 4000grit, 95g

$20.00

For final touch-up or occasional stropping while carving.

8000grit, 95g

$35.00

Order no.

Price

DF-10 $20.00

GRANITE SURFACE PLATE

Measuring 300 x 230 x 50mm with

0.0001” accuracy. Perfect for lapping

of tools or checking setups on small

engineering projects.

Order no.

Price

GSP-1 $62.00

DIAMOND

DRESSER

1/2 carat industrial diamond, 150mm in

length. Ideal for dressing grinding wheels so

they run true. 175g.

Order no.

Price

CT-120110 $21.00

Want to see more? See our website for our full range of products.

77


Sharpening

DMT ® DIA-SHARP TM

Sharpening

stones have

a continuous

diamond surface

bonded

to solid steel in a

unique electroplating

process that

quickly puts a razor

edge on tools.

Order no. Grit Price

Size: 83 x 51 x 1.2mm

DMT-D3E Extra Fine $15.00

DMT-D3F Fine $15.00

DMT-D3C Coarse $15.00

Size: 101 x 22 x 5mm

DMT-D4E Extra Fine $15.00

DMT-D4F Fine $15.00

DMT-D4C Coarse $15.00

Size: 151 x 51 x 6mm

DMT-D6E Extra Fine $35.00

DMT-D6F Fine $35.00

DMT-D6C Coarse $35.00

DMT-D6X X-Coarse $35.00

Size: 203 x 76 x 9.5mm

DMT-D8EE XX-Fine $99.00

DMT-D8E X-Fine $65.00

DMT-D8F Fine $65.00

DMT-D8C Coarse $65.00

DMT-D8X X-Coarse $65.00

DMT-D8XX X X-Coarse $99.00

MINI WHETSTONE

70 x 25mm, small and easy to carry. Excellent

for router bits and turning tools. 20g each.

Order no. Grit Price

DMT-W7E Extra Fine $10.00

DMT-W7F Fine $10.00

DMT-W7C Coarse $10.00

DOUBLE SIDED FOLDING WHETSTONE

Diamond sharpener with two grits. 23 x

110mm. One on each side.

Order no. Grit Price

DMT-FWFC Fine/Coarse $45.00

DMT-FWEF X Fine/Fine $45.00

SINGLE SIDED FOLDING WHETSTONE

Size: 23 x 110mm

Order no. Grit Price

DMT-FWE X-Fine $29.00

DMT-FWF Fine $29.00

DMT-FWC Coarse $29.00

DMT-FWX X-Coarse $29.00

DMT ® 10” DUOSHARP STONES

Size: 203 x 67mm.

Order no. Grit Price

DMT-W250CXNB Crse/Xcrse $159.00

DMT-W250FCNB Fine/Crse $159.00

DMT-W250EFNB Xfine/Fine $159.00

Fine/Crse, no

DMT-W250ECNB

base

$159.00

DMT ® 8” DUOSHARP PLUS WITH BASE

This 8” version of the Duosharp has the

added advantage of a continuous diamond

section at one end for sharp pointed tools.

Also included at no cost is the DuoBase with

non-slip feet. Size: 203 x 67mm.

Order no. Grit Price

DMT-WM8FC-WB Fine/Coarse $139.00

DMT-WM8EF-WB X-Fine/Fine $139.00

8” DUOSHARP PLUS WITHOUT BASE

Order no. Grit Price

DMT-WM8CX Coarse/X-Coarse $89.00

DMT-WM8FC Fine/Coarse $89.00

DMT-WM8EF X-Fine-Fine $89.00

DMT ® HANDLED DIA-SHARPS TM

With overall length of 180mm, these very

sturdy sharpening stones have been

moulded onto the plastic handle not glued

like inferior competitors. Size: 63 x 19mm.

Order no. Grit Price

DMT-D2E Extra Fine $10.00

DMT-D2F Fine $10.00

DMT-D2C Coarse $10.00

TAPERED SHARPENER

100mm long cone tapering from 3-9mm.

Ideal for carving and turning gouges, toolmaking,

etc. 600 grit. 110g.

Order no.

Price

DMT-DCSFH $32.00

FOLDING FLAT FILE

Tapers from 6-19mm, 110mm long.

Order no. Grit Price

DMT-FFF Fine $33.00

DMT-FFC Coarse $33.00

DMT ® 6”

COUNTERTOP

WHETSTONE

Choice of four grits, 1200 extra

fine, 600, fine, 325 coarse and 220 extra

coarse. Size: 152 x 50mm. 300g.

Order no. Grit Price

DMT-W6XP X-Coarse $49.00

DMT-W6CP Coarse $49.00

DMT-W6FP Fine $49.00

DMT-W6EP X-Fine $49.00

DMT ® WAVE

Combined

convex and

concave abrasive

surfaces. Affords long

sharpening strokes providing

1.59mm radii tapering

to 25mm radi accommodating all curved

gouges.

Order no. Grit Price

DMT-WAV-E X-Fine $65.00

DMT-WAV-F Fine $65.00

DMT ® 10” & 12” DIAMOND STEELS

Restoring a cutting edge in minutes. This superb

tool not only straightens but sharpens

knives.

Order no. Size/Grit Price

DMT-DS0F 10”/Fine $39.00

DMT-DS2F 12”/X-Fine $42.00

DMT ® DOUBLE

SIDED DIA-SHARP TM

Combines two grits in the same

stone. Fast and easy way to sharpen any

tool. Size: 150x50mm

Order no. Size/Grit Price

DMT-D6CX X-Coarse/Coarse $59.00

DMT-D6FC Coarse/Fine $59.00

DMT-D6EF Fine/X-Fine $59.00

DMT-D6FX Fine/X-Coarse $59.00

78 For more information & to shop online go to www.carbatec.com.au


Sharpening

VERITAS ® GRINDER TOOL REST

A weakness of bench grinders is that the tool

rests are virtually useless. Our tool rest can

be used with 6” or 8” (up to 1” wide) grinders

and mounts directly in front of the grinder

and can be readily folded out of the way for

freehand grinding. An angle-setting gauge is

included for bevel angles. 510g.

Order no.

Price

05M23-01 $65.00

B. SKEW GRINDING JIG

This jig allows you to grind a radius rather

than a straight 20° skew. The radius is determined

by the amount the tool projects from

the jig. 175g.

Order no.

Price

05N13-01 $35.00

C. STRAIGHT GRINDING JIG

For straight grinding. Will fit directly to the

grinder tool rest shown above or will fit on

any grinders tool rest with an edge parallel to

the grinding wheel surface. Used for straight

or 30° bevels.

Order no.

Price

05M06-01 $32.00

SHAPED FELT WHEEL FOR CARVING

TOOLS

A constant problem for carvers is honing the

inside of gouges, parting, and vee tools. This

felt wheel not only has the right shape for

such work, but because it is extra hard, it will

hold that shape. 150mm in diameter, 22mm

thick, 5/8” hole with 1/2” bushing. 360g.

Order no.

Price

08M42-03 $85.00

FLAT FELT BUFFING WHEELS

The finest edge you can get on any tool is

with a hard felt wheel. When dressed with

blade honing compound, the edge is noticeably

sharper than most razor blades. A medium

felt wheel is still very firm, but is more

suitable for carving tools.

Order no. Description Price

08M40-01 6” x 1/2”, Medium $24.00

08M40-03 6” x 3/4”, Medium $37.00

08M40-05 6” x 1”, Medium $42.00

08M41-03 6” x 3/4”, Hard $42.00

08M41-05 6” x 1”, Hard $49.00

7

TORMEK SHARPENING SYSTEMS

The key word when sharpening the Tormek way is repeatability. The tools are guided in jigs

– you remove only a minute fraction of the steel at each sharpening, which makes it fast.

An extra benefit is that your tools last longer. You can shape the tool exactly to your needs.

Even such complicated shapes as fingernail turning gouges, spoon carving gouges and

oval skew chisels with a radiused edge are easily sharpened. Once the shape is created,

you can resharpen the edge in less than a minute. The water cooled slow speed grindstone

is in harmony with the physical laws governing the steel tool – the edge does not overheat

and lose its hardness. You finish the sharpening process on the leather honing wheel, which

lets you polish the edge to a razor sharpness. No grinding dust is produced to pollute the air.

The steel particles are deposited into the water trough. The Tormek method is safe. At the low

speed, you can fully control the sharpening. Since no sparks are produced, there is no risk

to your eyes and you can safely use the machine in areas of high fire risk. Since 1973 Tormek

has introduced many new techniques and set the standard in water cooled sharpening. We

are dedicated to sharpening and we are continuously working on new developments to satisfy

all your sharpening needs. Buying a Tormek is a safe investment in quality and performance.

You are assured that all future developments will fit your machine.

Specifications TOR-T3 TOR-T7

Housing ABS Plastic Welded Steel

Grindstone 200 x 40mm 250 x 50mm

Leather Honing Wheel 145 x 26mm 220 x 31mm

Main Shaft in stainless steel Yes Yes

Motor 615x620mm 200 W

Duty Cycle 30 min/hour Continuous

Running Speed 120rpm 90rpm

Gross Weight 9.1kg 16.7kg

Warranty 7 years 10 years

Order no.

Price

TOR-T3 $579.00

TOR-T7 $879.00

TORMEK ACCESSORIES

Order no. Desc. Price

TOR-DBS-22 Drill Bit Attachment $349.00

TOR-HTK-705 Handtool Kit $215.00

TOR-SVH-320 Electric Planer Blade Jig $249.00

TOR-TT-50 Truing Tool $105.00

10

ACCESSORIES

• Large range of Jigs

• Rotating Base

• Angle Master

• Honing Wheel

• Stone Grader

• Tool Setter

• Truing Tool

• Honing Paste

See our full range of

Tormek Accessories at

www.carbatec.com.au

WOODTURNER’S KIT

The perfect combination of Tormek accessories

for the woodturner. Saves you dollars!

Kit includes the following:

• TOR-SVD-185 Thumbnail Jig

• TOR-SVS-50 Multi Jig

• TOR-SVD-110 Tool Rest

• TOR-LA-120 Leather Profile Hone

• TOR-TTS-100 Turning Tool Setter

• Woodturner’s Instruction Manual

• BONUS machine cover

Order no.

Price

TOR-TNT-708 $389.00

Want to see more? See our website for our full range of products.

79


Sharpening

CARBA-TEC ® WIDE STONE GRINDER

Excellent value for money. Great for cleaning up an

edge on most woodworking and general household

tools, with a wheel wide enough for carving and

turning tools. We’ve also included an LED light

and two toolrests. 9kg. Specifications: 230v, 200w,

2800rpm approx. Grinding wheels both 6” in diameter,

1 x 20mm and 1 x 40mm wide aluminium oxide.

Order no.

Price

CT-WSG $99.00

CREUSEN POWERLINE TM

8” HIGH SPEED DOUBLE

GRINDER

This sturdy bench grinder is

suited for heavier work and fitted

with a very powerful 600W

motor and 200mm diameter by

25mm wide stones.

Specifications

Voltage

230v, 50-60Hz

Power

600w

Speed

2800rpm approx.

Grinding Wheel 200 x 25 x 15mm

Order no.

Price

CG-DS7200T $285.00

CREUSEN POWERLINE TM 6” HIGH

SPEED DOUBLE GRINDER

This is the most popular Creusen

grinder and great for just about

any workshop activity. On one

side is a generous 40mm wide

aluminium oxide stone and on

the other a 20mm coarse grey

aluminium oxide stone for general

grinding.

Specifications

Voltage

230v, 50-60Hz

Power

350w

Speed

2800rpm approx.

Grinding Wheel 150 x 40 x 15mm

Order no.

Price

CG-DS7150TS $229.00

CREUSEN POWERLINE TM 6” LOW SPEED DOUBLE GRINDER

Creusen have made this grinder with woodturners particularly in mind. This model’s slower

speed prevents burning the

delicate tips of turning tools.

It is fitted with 40mm wide

white stones - one wheel is a

coarse 60 grit and the other

is a finer 100 grit; bore size

of both is 15mm.

Specifications

Voltage

230v, 50-60Hz

Power

350w

Speed

1400rpm approx.

Grinding Wheel 150 x 40 x 15mm

Order no.

Price

CG-DS7500TS $319.00

Polishing Spindle

Polishing Set

CREUSEN GRINDER ACCESSORIES

Order no. Description Price

CG-900163 Polishing Spindle RH $59.00

CG-900152 Polishing Spindle LH $59.00

CG-900245 Polishing Set 150mm $139.00

CG-900250 Polishing Set 200mm $159.00

A.

B.

CERAMIC SHARPENING STONES

Ceramic stones are valued for their durability

and the very keen edge they give in the finer

grits. These two stones are ideal for carvers

who do all their sharpening free hand and

can quickly wear grooves in water stones.

(A) is about 800 grit and used for edge shaping.

(B) is about 8000 grit and is used for

final honing. Both are 4” x 2” x 1/2”. The

manufacturer states that neither requires lubrication

and that both clean up quickly with

soap and water. Made in USA.

Order no. Grit Price

A 60M21-01 800 $49.00

B 60M21-02 8000 $49.00

PFEIL ARKANSAS

SLIP STONES

Complete set of four

slip stones in various

shapes, suitable for all

carving chisels, gouges.

Used with honing oil. 175g.

Order no.

Price

PF-ARK-SET $88.00

PFEIL

LEATHER

STROP

Premium fine calf

leather mounted on a wooden block.

FLEXCUT TM SLIPSTROP KIT

This wooden form has been

specially profiled

to allow for polishing

and deburring

the hard

to reach areas on

the inside of V-tools

and gouges. Kit quick- ly polishes

all hardened steels. 130g.

B.

Order no. Description Price

A. PF-ST-R1 120mm long $41.00

B. PF-ST-R2 Double Sided 150mm $72.00

Order no.

Price

FLX-PW-12 $17.00

FLEXCUT TM

GOLD TM

POLISHING

COMPOUND

Specially formulated to apply like a crayon.

Its blend of aluminium and titanium oxide

provide a balance between aggressive removal

of hardened tool steel and offering a

high-colour polish. 130g.

Order no.

Price

FLX-PW-11 $11.00

A.

80 For more information & to shop online go to www.carbatec.com.au


Clamping, Vices & Benches

A.

Basic

Workbench

B & C.

Optional Cabinet

PROFESSIONAL WORKBENCH

This European made workbench has all the

classic features: tail vise, front vise, 40mm

thick work surface and rear tool well. These

all combine to give you a solid, sturdy work

area for planing, paring and clamping. Another

excellent feature of this bench is that

you can start with the basic bench shown

above with drawer and add the cabinet at a

later time as an upgrade. Sold separately.

Order no. Description Price

CTW-45 Workbench $1,295.00

CTW-CAB Opt. Cabinet $299.00

CARBA-TEC ® HEIGHT

ADJUSTABLE WORKBENCH

The latest addition to our quality workbench

range. This heavy duty laminated solid oak

workbench features a solid 25mm thick work

top, double thick front, back and sides, and

heavy duty height adjustable steel legs. This

great bench suits all woodworkers...short

and tall. Quality vise hardware and powder

coated shelf and leg assembly add to the

quality and presentation of this fine bench.

Order no.

Price

WB-6030 $799.00

VERITAS ® TWIN SCREW VISE

The only non-racking full width end vise on

the market. Clamp anything anywhere in the

vise, the jaws stay parallel. The chain drive

ensures parallelism and eliminates racking.

A spring-loaded pin lets you disengage the

chain for controlled skewing. Enough chain

is included for benches up to 32” wide. Installation

hardware & mounting instructions

included. Wooden jaws not included.

Order no.

Price

05G12-26 $309.00

VERITAS ® INSET VISE

This low-profile vise is similar to a wagon vise

in function, but in a compact, self-contained

form for easy installation in a work surface,

adding a permanent, adjustable dog right

where it’s needed. Designed to hold work

between its single jaw and an external stop

such as a bench dog, it has a clamping capacity

that is limited only by the size and doghole

spacing of your work surface. 101.6 (4”)

range of travel. 1.17kg.

Order no. Description Price

05G31-01 Inset Vise $99.00

05G31-03 Opt. Pivot Jaw $16.00

VERITAS ® QUICK-RELEASE FRONT VISE

Using the same quick release mechanism as

our tail vise, our front vise has a simple on-off

cam lever to engage or disengage the Acme

threaded screw, allowing it to apply up to

180kg of force in either clamping or spreading

applications. The screw mechanism provides

310mm of overall travel (less the thickness

of your wooden jaw and bench apron).

The vise requires an unobstructed mounting

area on the underside of the bench top at

least 300mm wide by 405mm deep (with a

50mm thick bench apron and a 44mm thick

jaw). Made in Canada.

Order no.

Price

05G34-01 $399.00

VERITAS ® QUICK-

RELEASE SLIDING

TAIL VISE

Quickly incorporated into a new bench construction

or easily retrofitted to an existing

bench without major surgery. The end plates

are symmetrical, so you can install the T-

handle and quick-release lever in a right- or

left-handed orientation, allowing the vise to

be mounted at either end of the bench.

Order no.

Price

05G30-01 $339.00

A. VERITAS ® HOLD-DOWN

Clamps workpiece to a bench or anywhere

a 19mm hole can be drilled. The long, low

profile arm is unobstructed at the clamping

end, allowing good access to work from all

sides. The 254mm hold-down post gives you

203mm of clamping capacity, matching the

203mm throat capacity. An accessory post

of 139.7mm is also available as an option.

1.37kg.

B & C. ROUND BENCH DOGS

Good dogs make a bench far more functional.

These bench dogs are made from

solid-brass rod and can be installed in any

bench by drilling a 19mm hole. The combined

cross-hatching and 2° inward slope of

the dog face hold wood very securely. A side

spring holds the dog at any desired projection.

The 111mm Bench Dogs are standard

length. The Bench Pups (at 60mm) are fine

for benches with tops up to 38mm thick. Sold

in pairs.

D. BENCH DOG & PUP MUZZLES

These slip resistant covers slide over bench

dogs (or pups) to give you a non-marring

surface that will hold firmly. Sold in pairs.

F.

E. WONDER DOG

With a 19mm shank and 6” long, these dogs

can be used anywhere you can drill a 3/4”

hole. The swivel handle combined with the

fine screw lets you apply ample clamping

pressure in any position. 640g.

F. WONDER PUP

The same in all respects as the Wonder Dogs

except that the post is shorter (70mm). The

side spring is replaced with an O-ring. 400g.

Order no. Description Price

05G14-01 A. Holddown $99.00

05G14-02 accsy post 139.7mm $12.00

05G04-02 B. Bench Dog $37.00

05G04-04 C. Bench Pups $29.00

05G04-10 D. Bench Dog Muzzle $6.00

05G04-06 D. Bench Pups Muzzle $5.00

05G10-01 E. Wonder Dog $49.00

05G10-02 F. Wonder Pup $45.00

E.

D.

Want to see more? See our website for our full range of products.

81


Clamping, Vices & Benches

VERITAS ® SURFACE CLAMP

This fast-acting clamp can be used anywhere

you can drill a 19mm diameter hole. The post

has a wedging mechanism that anchors it

firmly in material as thin as 5/8” (15.9mm) -

depending on the strength of material. This

makes it ideal for use with jigs and fixtures

such as sliding tables for saws. The clamp

arm can grip anything from veneer to material

up to 3-3/4” (95.2mm) thick.

Order no.

Price

05G19-01 $87.00

VERITAS ® PANEL CLAMP SET

Bowed panels, a thing of the past? Easy to

use, tightens by hand, stackable for production

work. Best of all, makes double clamp

bars of any length to suit your own needs.

The serrated posts grip the bars, keeping a

panel flat under any pressure load without allowing

the bars to lift. Bars can be made by

drilling 3/4 ” diameter holes in 4 x 2’s allowing

you to stack panels, since there is room

for the top of one post and the bottom of

another in the same hole. Clamp any thickness

from 5/8” to 2” with the clamp pads

dead centre on the stock. The screw has 5”

of travel. Wood not included. 720g.

Order no.

Price

05G16-01 $59.00

DOUBLE PANEL CLAMP KIT

Eliminates buckling during board jointing

by applying pressure in both horizontal and

vertical directions. Suitable for projects up to

85mm thick. Maximum width is determined

by length of 50mm x 50mm wooden beams

(not included). Double panel clamps are sold

individually, two or more are usually required

for most projects. 1.71kg.

Order no.

Price

YF-00101 $41.00

IRWIN SASH CLAMPS

Order no. Capacity Price

IRW-135-2 610mm $59.00

IRW-135-3 760mm $59.00

IRW-135-4 916mm $61.00

IRW-135-5 1070mm $64.00

IRW-135-6 1220mm $65.00

IRWIN T-BAR CLAMPS

Order no. Capacity Price

IRW-136-5 1070mm $125.00

IRW-136-6 1220mm $134.00

IRW-136-7 1370mm $135.00

IRW-136-9 1680mm $147.00

IRW-136-11 1980mm $162.00

GROZ

HEAVY DUTY

CLAMP HEADS

A bar clamp of any length can b e

made by using a piece of timber 25mm thick.

The timber is then drilled with holes, producing

a light duty bar cramp as strong and

as true as the timber chosen. These clamp

heads also feature a fixed jaw that is slightly

angled inward to promote even clamping.

Order no.

Price

GZ-2525 $32.00

ROCKLER DELUXE

RATCHETING BAND CLAMP

Stitched band eliminates fraying and is

crimped to the clamp so it won’t come loose

when you’re clamping tight. Permanently attached

wrench will always be ready for use.

Rugged 1”Wx10’L (25.4mmx3m) nylon band

is rated for loads up to 453kg. Selflocking

cam guarantees a positive hold and instant

release.

Order no.

Price

RK-41419 $19.00

ROCKLER BOX JOINT CAULS COM-

PLETE SET OF 3 SIZES X 4.

Uniformly spaced pressure points clamp

individual box joint fingers at the corners to

give you the tightest joints possible. Plastic

cauls stand 6-1/4” (1/4” Cauls), 6-3/8” (3/8”

Cauls) and 6-1/2” (1/2” Cauls) tall. Four

Cauls per pack. Patent pending.

Order no.

Price

RK-42784 $32.00

PIPE CLAMPS

Make your own clamps with these handy but

reliable fittings. All you need is a piece of 3/4”

threaded pipe, cut to a desired length for the

job. 1kg.

Order no.

Price

PIPE-19 $16.00

SURE-FOOT PLUS TM 3/4” PIPE CLAMP

New and improved design features 2-1/4”

high jaws — a half inch higher than standard

pipe clamps! Extra-wide 2-1/2” foot provides

exceptional stability and prevents tipover

during setup. It won’t rock on uneven

bench surfaces! Higher base raises the pipe

1-1/2” above table to allow for greater handle

clearance, so you won’t have to position

clamp handle off the edge of a bench.

Order no. Description Price

RK-30921 Pipe Clamp $29.00

RK-39897 Clamp Pads 4pk $6.75

GROZ T-BAR &

SASH CLAMPS

Quality clamps for any job.

Order no. Description Price

GZ-39100 T-Bar 900mm $56.00

GZ-39101 T-Bar 1200mm $59.00

GZ-39102 T-Bar 1500mm $63.00

GZ-39103 T-Bar 1800mm $71.00

GZ-39160 QR Sash 750mm $60.00

GZ-39161 QR Sash 900mm $63.00

GZ-39162 QR Sash 1050mm $68.00

GZ-39163 QR Sash 1350mm $73.00

GZ-39164 QR Sash 1650mm $83.00

GZ-39165 QR Sash 1950mm $94.00

SURE FOOT TM 36”

ALUMINIUM BAR CLAMP

Extra wide 2-1/2” foot for

exceptional stability. Higher

base that raises the bar

1-1/2” above the table for excellent handle

clearance. Built-in clamp hook locks onto a

3/4” board eliminating the need to “clamp

the clamp” when hanging on a wall.

Order no.

Price

RK-41815 $59.00

82 For more information & to shop online go to www.carbatec.com.au


Clamping, Vices & Benches

HANDSCREW CLAMPS

Classic cabinet makers bench clamps with

wooden jaws that won’t mark your work or

slip.

Order no. Description Price

HSC-4 50mm Throat $10.00

HSC-6 75mm Throat $14.00

HSC-8 115mm Throat $18.00

HSC-10 135mm Throat $19.00

BENCH STOP

Mounts flush with bench surface. Simply turn

a screw and the jaw raises and locks in position.

Ideal for planing and sanding. 80g.

Order no.

Price

MJ-815 $15.00

LARGE

FRONT VISE

10-1/2” x 21” overall

with a 1-1/8” diameter

screw, and 13” clamp- ing capacity

less front jaw thickness. It can be

added to an existing bench or built into an

new one.

Order no.

Price

CTV-2038 $79.00

GROZ QUICK

RELEASE VISES

Simply pressing the trigger

initiates the quick action,

with the front jaw sliding

freely. Releasing

the trigger returns the

mechanism to normal for fine adjustment.

A very useful feature in repetitive work situations.

Made from close-grained grey cast

iron, these robust vises have an accurately

machined housing for smooth sliding movement

and true parallel action. Jaw opening

capacity for 175mm vise is 200mm and

250mm for the 225mm vise.

Order no. Description Price

GZ-39007 175mm $104.00

GZ-39009 225mm $167.00

KREG ® KLAMP VISE

The Klamp Vise can be connected to

almost any workbench providing over 158kg

of clamping power. Vertical clamping, sideways

clamping, vise-style clamping, routing,

sanding, sawing, and a whole lot more.

Order no.

Price

KR-KKS1060 $82.00

GROZ QUALITY G CLAMPS

Order no. Cap. Weight Price

GZ-35802 150mm 1.25kg $17.00

GZ-35803 200mm 1.5kg $25.00

THREE-WAY

EDGING

CLAMP

Capacity

65mm, load 32kg.

For gluing edge

banding etc. Weight

950g. Price for each.

Order no.

Price

JEC-65 $17.00

GROZ

150MM

CLAMP

ON VISE

A useful, lightweight

vise for the young

woodworker or

home handyman.

The design allows for two clamping

options. Permanent clamping on the workbench

is available via bolt slots in the vise

base or via the 55mm integrated clamp.

Opening capacity: 120mm. 3.3kg.

Order no.

Price

GZ-39006 $48.00

GROZ PLAIN SCREW

WOODWORKING VISE

Manufactured from close-grained grey cast

iron for long years of service. Accurately machined

housing assure smooth sliding movement.

Solid steel guide rods reduce wear

and tear giving the vises a smooth and true

parallel action, free of side or cross deflection.

Jaw width is 175mm. 200mm capacity.

7.5kg.

Order no.

Price

GZ-39001 $83.00

TWO WAY CROSS SLIDE VISE

Secures workpiece firmly and accurately on

the drill press table. Positive positioning in

two coordinates, lets you move the piece

accurately. These controls provide precise

adjustment for a myriad of drilling and cutting.

Jaw width 103mm, Jaw opens 95mm.

Weight: 10kg.

Order no.

Price

CSV-4 $83.00

PARROT VISE

Built like a machinist’s vise, the Parrot vise incorporates

a unique tightening cam that lets

it pivot freely through 360° until you tighten

the jaws firmly, locking the vise in place. This

allows you to back off the clamp screw just

enough to rotate the vise for access to any

part of a work piece without releasing it from

the jaws. Additionally, the vise can be lifted

from its heavy pivot post and reinstalled horizontally.

89mm wide cast iron jaws open to

120mm. There is a 44mm square machined

anvil just behind the jaws. 4kg.

Order no.

Price

PARROT-VISE $136.00

Want to see more? See our website for our full range of products.

83


Clamping, Vices & Benches

HEAVY DUTY PRO FRAMERS CLAMP

Solid aluminium. Capacity min. 67mm

square to max. 915mm square or equivalent

in rectangular or round. Now fitted with pivoting

jaws that allow virtually any angle to be

securely clamped. Suitable for framing or

furniture construction, etc. 1.2kg.

Order no.

Price

TV-148 $46.00

HEAVY DUTY PRO

FRAMERS

CLAMP

Solid aluminium.

Capacity min. 67mm

square to max. 915mm

square or equivalent in

rectangular or round. Suitable

for framing or furniture construction,

etc. 1.2kg.

Order no.

Price

TV-146 $41.00

VERITAS ® SPEED FRAME CLAMP

The fastest adjusting frame clamp on the

market. The four clamping nuts are designed

to let you make fast adjustments. They are

cross drilled to slide easily until they come

up against a corner clamp; then their threads

engage. To release, just back them off a

turn and they slide again. The corners are

accurate extrusions with a machinists inside

corner and provide a glue gullet. Kit includes

extensions as shown giving a maximum capacity

of 44” square or 65” x 23” rectangle.

1.24kg.

Order no.

Price

05F01-20 $49.00

PROGRIP TM PANEL GUIDE

The ideal solution for guiding routers, circular

saws, jigsaws, etc when machining large

or small panels. The extruded aluminium rail

is fitted with a 3-stage cam clamp fixed at

one end and a moveable foot at the other.

The extrusion incorporates the use of a T-bolt

slot on both sides to allow the use of custom

made jigs, etc. Unit clamping capacity is

2.5m, perfect for trimming sheet material or

plywood on site. Due to its length this product

can only be shipped by road freight. 6kg.

Order no.

Price

FM-105 $157.00

ProGrip

System

EXTERNAL MITRE CLAMP

A truly versatile clamp with a unique swivel

head, enabling the woodworker to clamp

wood of even or uneven thicknesses at 90°

for T joints, L joints, mitre joints. 1.10kg.

Order no.

Price

TV-286 $41.00

INTERNAL MITRE CLAMP

Similar to the TV-286, this clamp is heavy

duty and designed for internal clamping situations.

This clamp is also suitable for mounting

directly onto a workbench or jig. 1.20kg.

Order no.

Price

TV-276 $41.00

BAND CLAMP

Suitable for clamping case goods, picture

frames, chairs, etc. Maximum circumference

3.8 metres. 520g.

Order no.

Price

96601 $16.00

BESSEY LM SERIES CLAMPS

Originally intended for use where moderate

clamping pressure was to be applied, Bessey’s

LM Series quick action clamps have

proven highly successful in DIY and industrial

sectors alike. Particular applications this type

of clamp suits include model and instrument

making, light engineering and various home

workshop tasks. LM series clamps have a

throat of 50mm and are supplied with plastic

caps. They are die cast and are intended for

light duty work.

Order no. Description Price

BES-LM10 100mm $12.00

BES-LM15 150mm $12.00

BES-LM20 200mm $12.00

BES-LM25 250mm $13.00

BES-LM30 300mm $13.00

Baseplate

mounting

Cam-clamp

mechanism

PROGRIP TM SYSTEM

ProGrip is a comprehensive system for

guiding power tools such as routers and circular

saws, etc. The extruded aluminium rail

is fitted with a 3-stage cam clamp fixed at

one end and a moveable foot at the other.

The extrusion incorporates a T-bolt slot on

both sides to allow the use of custom made

jigs, etc. These slots also accept UHMW nylon

router and saw bases. Also incorporated

in the centre of the extrusion is a sliding metric

and imperial scale. ProGrip’s secondary

use is clamping jobs requiring low to medium

clamping pressure.

Order no. Description Price

FM-14N 14” ProGrip $31.00

FM-24N 24” ProGrip $41.00

FM-36N 36” ProGrip $48.00

FM-50N 50” ProGrip $60.00

FM-14BD Universal Base $48.00

FM-08 Back to Back Adaptor Kit $21.00

84 For more information & to shop online go to www.carbatec.com.au


Power & Pneumatic Tools

Invented for Life

Professional

GHO 15-82 PLANER

The fastest and least expensive

blade changes on the market

due to durable Woodrazor

blades and easiest possible

adjustment.

Order no.

Price

BO-GHO1582 $219.00

RANDOM

ORBITAL

SANDER

Features;

Compact,

ergonomic

d e s i g n

with three

softgrip surfaces for variable

grip positions. Bosch Micro-filter

system: perfect, efficient dust extraction.

Order no.

Price

BO-GEX125-1AE $159.00

GEX150 TURBO RANDOM

ORBIT SANDER

• Just one click: switch from

fine sanding to coarse sanding

or polishing

• Five times more material

removal in turbo operation

(coarse sanding)

Order no.

Price

BO-GEX150T $449.00

PALM ROUTER

GMR1

Features; 550W

motor - The most

powerful palm

router. Suitable

for hinge mortising,

decorative

working on

edges, groove

cutting, dovetail cutting, window

cutouts, decorative inlays, flush

trimming and more, power and

precision in your hand.

Order no.

Price

BO-GMR1 $309.00

GOP 250CE MULTI CUTTER

• Powerful 250W motor with

constant electronics

• Small grip circumference for

convenient, comfortable work

and precise results

• Ball socket joint and Zn gear

box, for flexibility, robustness

and vibration reduction.

Order no.

Price

BO-GOP250CE $229.00

GHG 660

LCD HEAT

GUN

• Cold setting: heating element

cools down within approx. 1

minute

• Removable coarse dirt filter

for cleaning

Order no.

Price

BO-GHG660LCD $189.00

GCM 12 GDL SLIDING

COMPOUND MITRE SAW

• Axial-Glide TM System allows

for expanded cutting capacity

and smooth precision cuts.

• Dual line precision Laser

• Softstart for smooth ramp up

of saw

• Up to 110mm height and

341mm cutting width

Order no.

Price

BO-GCM12GDL $1,199.00

GTA 2500 WORKBENCH

• Robust steel construction

and pneumatic tyres for high

level of work safety

Order no.

Price

BO-GTA2500 $499.00

GSR 18V-LI CORDLESS

DRILL/DRIVER

• Shortest head length in its

class for easy handling

• Longest runtime in its class -

finish many applications in one

charge

Order no.

Price

BO-GSR18V-LI2 $289.00

GSB 16RE IMPACT DRILL

• Robust and powerful 701 W

motor for tough applications

• Sturdy Metal Keyless chuck

for easy and fast change of accessories

Order no.

Price

BO-GSB16REKLC $149.00

GWS 8-115 ANGLE GRINDER

Features; 800 watts of power,

good handling due to ergonomically

adapted housing and spindle

lock for easy disc change.

Order no.

Price

BO-GWS8-115 $199.00

GAM220MF ANGLE

MEASURER

• Automatic calculation of

single and double mitre angles

• Rapid calculation and transfer

of angles by means of memory

function

Order no.

Price

BO-GAM220MF $199.00

TABLE SAW GTS10XC

• Motor brake, soft start, over

load protection and constant

speed electronics.

• Integrated sliding table for

workpieces up to 355mm

Order no.

Price

BO-GTS10XC $1,099.00

STAND TO SUIT GTS10XC

Folds flat for easy and lightweight

transport and storage

Order no.

Price

BO-GTA6000 $199.00

GLM 80 LASER

RANGEFINDER + R60

MEASURING RAIL

• Measurements up to

80m

• New functionalit due to

integrated 360° incline

sensor

• Up to 25,000 measurements

per charge

• Set includes rangefinder and

rail

Order no.

Price

BO-GLM80SET $379.00

Want to see more? See our website for our full range of products.

85


Power & Pneumatic Tools

Quality German Made Power Tools

Supplied

in systainer

Supplied

in systainer

Supplied

in systainer

PLUNGE SAW TS 55 WITH 1400MM

GUIDE RAIL

Strengths and benefits:

• FastFix: quick and easy saw blade

changing and adaptation to the

working material

• Spring-loaded riving knife for

unhindered plunge cuts

• Attachable splinterguard for

high-quality results

• Quick-acting brake system for safe,

convenient sawing

• Tool-less play setting on the guide rail

Order no.

FE-561508

Price

$999.00

GEAR DRIVEN ECCENTRIC SANDER

ROTEX RO 150

Strengths and benefits:

• Three tools in one: coarse sanding, fine

sanding and polishing

• ROTEX rotary motion for efficient

material removal

• Eccentric motion for high-quality,

scratch-free surfaces

• FastFix sanding pad system, tool-less

• Ideal ergonomic grip positions

• Sanding up to the edge thanks to the

Festool PROTECTOR

Order no.

FE-571807

Price

$935.00

ECCENTRIC 3 & 5MM SANDERS

ETS 150/3

Strengths and benefits:

• 3mm sanding stroke for an excellent

surface finish.

• 5 mm sanding stroke for efficient

material removal.

• Dual bearing for a long service life

• Weighs only 1.8 kg for particularly

effortless work.

• Sanding pad brake for safe, faultless

work - no rework.

• Stepless speed preselection, constant

speed even under load.

Order no. Description Price

FE-571789 3mm $560.00

FE-571797 5mm $560.00

Supplied

in systainer

KAPEX KS 120 SLIDING COMPOUND

MITRE SAW

Strengths and benefits:

• Twin-column design for accurate cuts

• Compact, lightweight design for

convenient transport

• FastFix saw blade change for

adaptation to the working material

• Precision angle transfer via smart bevel

and dual-line laser

• Fine bevel adjustment from the front of

the machine

• Quick-action brake

Order no.

FE-561288

Price

$1,850.00

THE CLEANTEX CT26 & CT36 MOBILE

DUST EXTRACTORS

Strengths and benefits:

• 99.95 separation efficiency at .03

microns.

• Antistatic function prevents static

build-up during use.

• Constantly high suction because of the

compact high performance turbine.

• Attachment of Systainers via Sys-Dock.

• Hose garage and cable windup for

greater tidiness and safety.

• Economical because of the optimal use

of the available volume with a

SELFCLEAN filter bag in the container.

Order no. Description Price

FE-583494 26L $1,099.00

FE-583495 36L $1,199.00

CORDLESS DRILL CXS

Strengths and benefits:

• Impressive ergonomics and light weight

(0,9 kg) for comfortable drilling and

screwdriving.

• The compact and handy shape

facilitates work even in tight spaces.

• FastFix interface and CENTROTEC

rapid tool-change system.

• 12-stage torque setting and switch-off

for precise screwdriving.

• Latest Lithium-ion battery technology

for the longest sustained usage.

Order no.

FE-564269

Price

$399.00

86 For more information & to shop online go to www.carbatec.com.au


FESTOOL CORDLESS DRILL TI 15

IMPACT SET

Strengths and benefits:

• Impact driver, drill driver and angle

driver all in one tool!

• Perfect for decking or weatherboards -

any tough, repetitive fastening task.

• Built to last with a powerful 15V EC-TEC

brushless motor

Order no. Description Price

FE-564356 Set Version $799.00

Try the

tools

before you buy

at a Festool

Test Centre

Skin

versions

from

$309

Visit a Festool Test Centre at your

local Carba-Tec ® Store where you

can try the tools before you buy and

experience Festool quality first hand!

Set

Version

DOMINO JOINING SYSTEM DF 500

Strengths and benefits:

• Versatile in application with DOMINO

sizes 4x20 mm to 10x50mm.

• Patented routing principle, unique

among handheld tools, for smooth and

accurate work.

• Stops that are quick and easy to adjust,

for accurate results.

• Rotation-proof joint with DOMINOs

providing maximum stability.

• System accessories compatible with

both DOMINO joiners.

Order no.

Price

FE-574257S

$1,695.00

DOMINO XL JOINING SYSTEM

Strengths and benefits:

• Versatile in application with DOMINO

sizes 8x20mm to 14x140mm

• Patented routing principle, unique

among handheld tools, for smooth and

accurate work.

• Stops that are quick and easy to adjust.

for accurate results.

• Depth stops allow for routing from 15 to

70mm deep.

• Innovative stop system - the DF700 is

positioned quickly and accurately using

integral stop pins.

• Board joining, cabinet making or light

framework joins - the DOMINO XL is

perfect for large work pieces.

Set version includes trim stop and cross

stop accessories.

Order no. Description Price

FE-574423 Basic $1,975.00

FE-574423S Set Version $2,075.00

Power & Pneumatic Tools

ELECTRIC HAND DRILL

POWERED LOCK

MORTISER

Simple, easy to use, self

centring jig for cutting mortises

for door locks. Drive shaft

accepts 1/4” shank router bits

or PC style mortise cutters.

Mortise length and

depth are controlled by

the integrated stop-collars. Unit

is powered by any electric power

drill (not included) and is supplied

in a great carry case. Maximum depth

of cut: 150mm, 6.5kg.

Order no.

Price

LM-2 $289.00

Optional Mortising Bits to suit

Order no. Width Price

PC-43698 5/8”-16mm $59.00

PC-43703 3/4” - 19mm $59.00

PC-43700 13/16”-20mm $59.00

PC-43701 7/8”-22mm $59.00

PC-43702 15/16”-24mm $59.00

PC-43704 1”-25.4mm $59.00

PC-43745 1-1/4”-32mm $75.00

CARBA-TEC ® BENCHTOP

EDGEBANDER

Features SWISS made 2000 watt Steinel heat

gun with infinitely variable temperature control

and 2 speed blower. This machine will

laminate pre-glued banding up to 56mm in

width. Overall dimensions 680 x 680mm.

Order no.

Price

CTEB-401 $499.00

CARBA-TEC ® END

TRIMMER

After edgebanding

your board, the end

trimmer is an essential

accessory for perfectly

trimming the excess

length off your banding.

Order no.

Price

ET-401 $29.00

PRO-GRIP HINGE

MORTISE JIG

Easy to set up, adjust

and use. This kit

clamps on to your

door, and uses the

supplied mortise bit

to recess your hinges accurately time and

time again. Replacement bits to suit are Box

Joint Bit (BJB-95), Mortising Bit (801-128-

11, if using bearing etc of old bit) or bearing

(791-010-00 ) and stop collar (541-001-00).

Order no.

Price

FM-78 $85.00

Want to see more? See our website for our full range of products.

87


Power & Pneumatic Tools

3 Stage turret

MULTI-STAND - WORK SUPPORT

Multi-purpose, adjustable support stand with

extra-wide tripod base for excellent stability

on level or uneven ground. Folds down in

seconds for convenient transportation and

storage. Maximum load is approximately

100kg. Height range is 835-940mm, Vertical

through horizontal tilt adjustment. 6.2kg.

Order no.

Price

TRI-MSA200 $59.00

PRECISION ROUTERS

Specifications TRI-JOF001 TRI-TRA001B

Input Power 1010W, 1-1/3hp 2000W, 2-3/4hp

Speed 8000- 22,000rpm 8000- 21,000rpm

Soft Start Yes Yes

Speed Control Yes Yes

Collet 1/2” with 1/4” reducer 1/2” with 1/4” reducer

Depth Adjustment

Micro Winder and Conventional “free”

plunge

Height Winder Kit

Winder - Rack & Pinion, Micro Winder,

Conventional “free” plunge

Spindle Lock Auto Auto

Plunge Range 0 to 59mm 0 to 68mm

Micro Adjustment Infinite Infinite

Bit Changes

Through-base, single wrench action, auto

shaft lock

Through-base, single wrench

Safety On/Off Yes Yes

Weight 4.3kg 7.4kg

Price $279.00 $399.00

ROUTER TABLE SYSTEM

The router mounting plate features slots for rapid

installation of all Triton Routers, however we

have included quality heavy duty fittings allowing

almost any 1/4” or 1/2” Router to be fitted*. By

adding other accessories as featured, you can

perform jigsaw cutting, biscuit joining and finger jointing. Accepts

most 1/4” & 1/2” routers.** May not be suitable for D-handle models

Specifications

Table Size

Cuts

Standard Inclusions

Suits

Weight

540 x 690mm

Planing, trenching, rebating, moulding

Planing shims, alignment tool & cutter inserts

Most Routers

12.5kg

Moulding against the fence

Safe free-hand operation

End grain work on

sliding protractor

Order no. Description Price

TRI-RTA300 Router Table System $299.00

TRI-RSA300 Router Table Stand $269.00

SERIES 2000

WORKCENTRE

SYSTEM

You don’t need to be a professional

woodworker for

craftsman-like results. With

a Triton Workcentre and

a circular saw you’ll be

amazed at how easily

and accurately you can

make quality furniture,

toys, craft items and

household renovations. As a

stand-alone unit the Workcentre

offers amazing versatility, unparalleled

by any other product.

With the addition of Triton quality

accessories, it becomes a complete

woodworking system. *

Circular saw not included.

Specifications

Suits

Cuts

Capacity

Workshop Footprint

Weight

45° Bevel Saw

Mitre Saw

Mitre Cuts

Most circular saws 184-235mm

Rip up to 620mm, Mitre 0° to 45° left & right

45° bevel rip up to 400mm wide, Crosscut up to 500mm

Bevel crosscut and compound mitre

Rip: 0 to 620mm, Crosscut: Up to 500mm

Standing: 900 x 600 x 1300mm, Folded: 350 x 440 x

1000mm, Table Top: 870 x 640mm

35kg (without saw)

Order no.

Price

TRI-WCA201C $699.00

88 For more information & to shop online go to www.carbatec.com.au


Power & Pneumatic Tools

Precision Power Tools

UPGRADE YOUR WORKCENTRE SYSTEM

HEIGHT WINDER

KIT

Fits the Workcentre

pressed steel chassis

for quick and

precise blade height

adjustment. Control

blade height by a

winder through the table slot, or by a thumbwheel

in crosscut mode.

Order no.

Price

TRI-WCA390 $79.00

WHEEL KIT

Add the convenience

of easy storage and

portability by adding

a pair of retractable

wheels.

Order no.

Price

TRI-AWA200 $59.00

SLIDING EXTEN-

SION TABLES

Extends the ripping

and cross cutting of

the Workcentre Sliding

table locks for

conventional ripping

or unlocked for use

as a sliding panel saw. The Maxi handles full

size 2400mm x 1200mm sheets with a rip capacity

of 1200mm from the blade and can

cross cut sheets up to 1200mm wide. The

Mini is perfect when space is limited and can

rip up to 1000mm from the blade and cross

cut sheets up to 600mm wide. Dismantles to

convenient size for storage. Offers a fully adjustable

fence.

Order no. Description Price

TRI-ETA100 Mini $379.00

TRI-ETA300 Maxi $499.00

BEVEL

RIPPING GUIDE

Fully adjustable from

15° to 90°, enables

you to bevel rip or

chamfer long and

wide workpieces

on the Workcentre.

Guide slot enables use of the Workcentre

protractor.

Order no.

Price

TRI-BRA200 $229.00

ROUTER MOUNT-

ING PLATE

Accepts most routers

for use in the

cross cut mode for

overhead routing.

Create trenches or

dados quickly and

easily or add a figured edge to panel work.

Order no.

Price

TRI-AJA150 $59.00

DUST

COLLECTOR

This handy bucket

prevents dust filling

up or clogging your

vacuum cleaner. 20

litre capacity.

Order no.

Price

TRI-DCA300 $69.00

DUST BAG

Dust bag fits beneath

the Workcentre

allowing effective

dust collection

in tablesaw mode.

Removable pouch

allows easy disposal

of dust.

Order no.

Price

TRI-DCA250 $99.00

PLANER

ATTACHMENT

KIT

Accepts most popular

82mm electric

planers. Fold-down

position allows fast

changes between

planer and saw modes. Easily detaches for

storage. Includes detachable dust collection

bag and separate switch box.

Order no.

Price

TRI-EPA001 $249.00

ROUTER TABLE

Expand your Triton

Workcentre to an almost

limitless list of

applications.

Order no.

Price

TRI-RTA300 $299.00

SUPERJAWS - PORTABLE CLAMPING

SYSTEM

This is the workstation you take right to the

job. It provides fast and easy hands free

clamping action of material up to 956mm

and features a massive force of up to 1000kg

for all clamping or pressing applications. It

holds anything; car parts, bicycles, timber

and tubing. Standard jaws are made of Urethane,

maximum load approximately 100kg.

Folded size 275 x 775 x 295mm, standing

size 980 x 1000 x 860mm. Weighs 16kg.

Order no.

Price

TRI-SJA200 $169.00

UPGRADE YOUR SUPERJAWS

LOG JAWS- For Powerful Clamping

Order no.

Price

TRI-SJA460 $39.00

CAST IRON ENGINEERS JAWS

Order no.

Price

TRI-SJA470 $59.00

TOOL TRAY

Order no.

Price

TRI-SJA420 $35.00

WOODRACK - STORAGE SYSTEM

Ideal for the woodworking workshop. Easy

to install. It’s highly suitable for metal products

in an engineering workshop. The Triton

woodrack also provides an excellent storage

solution in domestic homes for storing

a wide range or products neatly and safely.

Order no.

Price

TRI-WRA001 $59.00

Want to see more? See our website for our full range of products.

89


Routing & Accessories

CMT TM SOLID CARBIDE TWO FLUTE

SPIRAL BIT L

Order no. D X L Price

1/4” Shank Upcut Bit

191-001-11 3.2 12.7 50.8 $25.00

191-003-11 4.0 12.7 50.8 $25.00

191-005-11 4.75 19.0 50.8 $25.00

191-007-11 6.35 19.0 50.8 $25.00

191-008-11 6.35 25.4 63.5 $25.00

1/4” Shank Downcut Bit

192-001-11 3.2 12.7 50.8 $25.00

192-003-11 4.0 12.7 50.8 $25.00

192-005-11 4.75 19.0 50.8 $25.00

192-007-11 6.35 19.0 50.8 $25.00

192-008-11 6.35 25.4 63.5 $25.00

Order no. D X L Price

1/2” Shank Upcut Bit

191-501-11 8.0 25.4 76.2 $75.00

191-503-11 9.5 31.7 76.2 $75.00

191-505-11 12.7 31.7 76.2 $75.00

191-506-11 12.7 38.1 89.0 $89.00

191-507-11 12.7 50.8 101.5 $99.00

1/2” Shank Downcut Bit

192-501-11 8.0 25.4 76.2 $75.00

192-503-11 9.5 31.7 76.2 $75.00

192-505-11 12.7 31.7 76.2 $75.00

192-506-11 12.7 38.1 89.0 $89.00

192-507-11 12.7 50.8 101.5 $109.00

CMT TM MORTISE & PLANER BITS

D

D

X

X

Order no. D X Price

1/4” Shank without bearing

801-128-11 12.7 7.9 $22.00

801-127-11 12.7 19.0 $22.00

801-158-11 15.8 19.0 $25.00

801-190-11 19.0 19.0 $25.00

801-317-11 31.7 12.7 $30.00

1/2” Shank without bearing

801-627-11 12.7 19.0 $22.00

801-690-11 19.0 19.0 $25.00

801-818-11 31.7 5.7 $30.00

801-817-11 31.7 12.7 $30.00

1/4” Shank with bearing

801-127-11B 12.7 19.0 $28.00

801-158-11B 15.8 19.0 $31.00

801-190-11B 19.0 19.0 $32.00

1/2” Shank with bearing

801-818-11B 31.7 5.7 $36.00

801-817-11B 31.7 12.7 $40.00

Spare Parts

791-010-00 12.7mm bearing $6.00

791-009-00 15.8mm bearing $8.00

791-004-00 19mm brg 1/4” bore $6.00

791-015-00 31.7mm bearing $14.00

541-001-00 Stopcollar 1/4” shank $5.00

541-002-00 Stopcollar 1/2” shank $5.00

X

D

CMT TM FLUSH

TRIM BIT

Order no. D X Price

1/4” Shank

806-096-11 9.5 12.7 $27.00

806-095-11 9.5 25.4 $27.00

806-127-11 12.7 25.4 $29.00

806-128-11 12.7 12.7 $29.00

806-064-11 6.35 25.4 $34.00

1/2” Shank

806-627-11 12.7 25.4 $29.00

806-628-11 12.7 12.7 $29.00

806-629-11 12.7 38.1 $39.00

806-630-11 12.7 50.8 $42.00

Spare Parts

791-002-00 9.5mm bearing $7.00

791-003-00 12.7mm bearing $6.00

990-058-00 Bearing Screw $2.00

CMT TM SUPER DUTY FLUSH TRIM BITS

X

Order no. D X Price

1/4” Shank

806-191-11 19.0 25.4 $39.00

1/2” Shank

806-691-11 19.0 25.4 $39.00

806-690-11 19.0 50.8 $49.00

Spare Parts

791-004-00 19mm bearing $6.00

990-058-00 Bearing Screw $2.00

CMT TM 3 IN 1

FLUSH TRIM BIT

Order no. D X Price

1/4” Shank

807-128-11 12.7 12.7 $30.00

807-190-11 19 15.87 $43.00

1/2” Shank

807-690-11 19 15.87 $43.00

Spare Parts

791-042-00 12.7mm Tri-bearing $16.00

791-043-00 19mm Tri-bearing $16.00

990-058-00 Screw 1/8” W $2.00

6 PIECE PROFILE BIT SET

A multi-purpose set for any job. Set includes:

1 chamfer bit, 1 ogee bit, 1 roundover bit, 1

rabbeting bit, 1 cove bit, 1 round nose bit. All

bits have 1/2” shanks.

Order no.

Price

800-504-11 $179.00

X

X

D

D

D

CMT TM TWO FLUTE

STRAIGHT BIT

Order no. D X L Price

1/4” Shank - Short Series

811-020-11 2.0 4.0 38.0 $23.00

811-030-11 3.0 8.0 45.0 $23.00

811-032-11 3.2 9.5 45.0 $25.00

811-040-11 4.0 10.0 45.0 $25.00

811-047-11 4.75 12.7 50.8 $25.00

811-050-11 5.0 12.0 50.8 $25.00

811-060-11 6.0 16.0 50.8 $25.00

811-064-11 6.35 19.0 50.8 $25.00

811-065-11 6.35 19.0 57.2 $25.00

811-070-11 7.0 18.0 48.0 $25.00

811-080-11 8.0 20.0 50.8 $25.00

811-081-11 8.0 25.4 71.5 $28.00

811-095-11 9.5 19.0 50.8 $28.00

811-096-11 9.5 25.4 63.5 $28.00

811-100-11 10.0 20.0 48.0 $28.00

811-120-11 12.0 20.0 50.0 $28.00

811-123-11 12.3 25.4 57.2 $28.00

811-127-11 12.7 19.0 57.2 $28.00

811-140-11 14.0 20.0 50.0 $28.00

811-142-11 14.2 14.2 57.2 $28.00

811-150-11 15.0 20.0 57.2 $28.00

811-158-11 15.8 19.0 66.7 $28.00

811-160-11 16.0 20.0 57.2 $28.00

811-180-11 18.0 20.0 50.0 $28.00

811-182-11 18.2 25.4 57.2 $28.00

811-191-11 19.0 20.0 57.2 $28.00

811-200-11 20.0 20.0 50.0 $28.00

811-220-11 22.0 20.0 57.2 $28.00

811-254-11 25.4 19.0 50.8 $32.00

1/2” Shank - Short Series

811-560-11 6.0 19.0 60.3 $29.00

811-564-11 6.35 19.0 60.3 $29.00

811-595-11 9.5 25.4 66.7 $29.00

811-600-11 10.0 25.4 63.5 $29.00

811-620-11 12.0 25.4 63.5 $29.00

811-623-11 12.3 25.4 63.5 $29.00

811-627-11 12.7 25.4 66.7 $29.00

811-628-11 12.7 25.4 82.5 $30.00

811-660-11 15.8 25.4 63.5 $30.00

811-661-11 16.0 25.4 63.5 $30.00

811-682-11 18.2 25.4 63.5 $30.00

811-690-11 19.0 25.4 63.5 $30.00

811-754-11 25.4 31.7 76.2 $37.00

Order no. D X L Price

1/4” Shank - Long Series

812-032-11 3.2 12.7 50.8 $26.00

812-060-11 6.0 25.4 60.3 $28.00

812-064-11 6.35 25.4 60.3 $28.00

812-080-11 8.0 31.7 60.3 $29.00

812-095-11 9.5 31.7 63.5 $29.00

812-100-11 10.0 31.7 60.3 $29.00

812-120-11 12.0 31.7 60.3 $29.00

812-127-11 12.7 31.7 70.0 $29.00

812-140-11 14.0 31.7 60.3 $31.00

812-150-11 15.0 31.7 66.7 $31.00

812-158-11 15.8 31.7 70.0 $31.00

812-160-11 16.0 31.7 66.7 $32.00

1/2” Shank - Short Series

812-595-11 9.5 31.7 73.0 $29.00

812-600-11 10.0 31.7 70.0 $29.00

812-611-11 11.1 31.7 82.5 $31.00

812-620-11 12.0 31.7 70.0 $31.00

812-627-11 12.7 38.1 79.5 $32.00

812-628-11 12.7 50.8 89.0 $40.00

812-660-11 16.0 31.7 70.0 $29.00

812-690-11 19.0 38.1 82.5 $40.00

X

D

90 CMT ORANGE TOOLS - THE ART OF CUTTING


Didn’t find the router bit you wanted?

Search online at www.carbatec.com.au for the full range.

Routing & Accessories

CMT TM PATTERN BITS

Order no. D X L Price

1/4” Shank

811-081-11B 8.0 25.4 71.5 $30.00

811-127-11B 12.7 19.0 57.2 $30.00

812-127-11B 12.7 31.7 70.0 $36.00

811-142-11B 14.2 14.2 57.2 $35.00

811-159-11B 15.8 12.7 58.0 $36.00

811-158-11B 15.8 19.0 66.7 $36.00

812-158-11B 15.8 31.7 70.0 $36.00

811-191-11B 19.0 20.0 57.2 $36.00

1/2” Shank

811-690-11B 19.0 25.4 63.5 $47.00

812-690-11B 19.0 38.1 82.5 $47.00

811-222-11B 22.2 25.4 66.7 $47.00

Spare Parts

791-010-00 12.7mm bearing $6.00

791-009-00 15.8mm bearing $8.00

791-004-00 19mm brg 1/4” bore $6.00

791-011-00 19mm brg 1/2” bore $18.00

791-021-00 22.2mm bearing $7.00

799-001-00 3/8” x 1/2” bushing $14.00

541-001-00 Stopcollar 1/4” shanks $5.00

541-002-00 Stopcollar 1/2” shanks $5.00

CMT TM ROUND

NOSE BIT

Order no. R D X Price

1/4” Shank

814-032-11 1.6 3.2 9.5 $26.00

814-064-11 3.2 6.4 12.7 $27.00

814-095-11 4.75 9.5 6.4 $27.00

814-127-11 6.35 12.7 9.5 $27.00

814-160-11 7.9 15.8 9.5 $28.00

814-190-11 9.5 19.0 11.5 $30.00

1/2” Shank

814-564-11 3.2 6.4 15.9 $37.00

814-627-11 6.35 12.7 31.7 $38.00

814-660-11 7.9 15.8 31.7 $45.00

814-690-11 9.5 19.0 31.7 $45.00

814-754-11 12.7 25.4 31.7 $58.00

CMT TM ROUND NOSE BIT WITH BEARING

X

Order no. R D X Price

1/4” Shank

814-127-11B 6.35 12.7 9.5 $33.00

814-160-11B 7.9 15.8 9.5 $37.00

814-190-11B 9.5 19.0 11.5 $41.00

1/2” Shank

814-690-11B 9.5 19.0 31.7 $59.00

Spare Parts

791-010-00 12.7mm Bearing 1/4” $6.00

791-009-00 15.8mm Bearing 1/4” $8.00

791-004-00 19.0mm Bearing 1/4” $6.00

791-011-00 19.0mm Bearing 1/2” $18.00

541-001-00 Stop Collar 1/4” $5.00

541-002-00 Stop Collar 1/2” $5.00

X

R

R

X

D

D

D

CMT TM 90° V GROOVE BIT

Order no. D X Price

1/4” Shank

815-064-11 6.35 8.0 $25.00

815-095-11 9.5 12.7 815-127-11 12.7 12.7 TM$26.00

1/2” Shank

815-660-11 15.8 12.7 $33.00

815-690-11 19.0 15.8 $35.00

CMT TM 90° V GROOVE

BIT WITH

BEARING

Order no. D X Price

1/4” Shank

815-127-11B 12.7 12.7 $32.00

1/2” Shank

815-690-11B 19.0 15.8 $47.00

Spare Parts

791-003-00 12.7mm Bearing $6.00

791-011-00 19mm Bearing $18.00

541-001-00 Stop Collar 1/4” Shank $5.00

541-002-00 Stop Collar 1/2” Shank $5.00

CMT TM DOVETAIL BITS X


D

Order no. D X A° Price

1/4” Shank

818-065-11 6.35 6.35 8° $23.00

818-064-11 6.35 8.3 7.5° $29.00

818-079-11 7.9 6.0 18° $29.00

818-081-11 8.0 9.5 8° $29.00

818-080-11 8.0 9.5 9° $29.00

818-096-11 9.5 9.5 9° $29.00

818-098-11 9.5 9.5 14° $29.00

818-097-11 9.5 12.7 8° $29.00

818-111-11 11.1 15.8 8° $29.00

818-132-11 12.7 10.3 18° $25.00

818-128-11 12.7 12.7 14° $29.00

818-130-11 12.7 12.7 14° $25.00