Download - Uddeholm

UHB 11
FORMAX
HOLDAX
A bolster steel with medium high carbon content suitable
for top and bottom plates and higher strength support
parts.
A bolster steel with low carbon content suitable for large
top and bottom plates and medium strength supports.
A pre-hardened bolster steel for support plates and
holders.
Steel for special applications
Uddeholm
grade
CARMO
SR 1855
VANCRON 40
VANADIS 30
VANADIS 60
Description/Applications
A pre-hardened steel particularly suitable for car body
dies. It can be flame / induction hardened or through
hardened and has a much better weldability than other
cold work tool steel. It is suitable for low production
volume tooling in general and for prototype tooling.
A low alloyed tool steel very suitable for profile rolls.
A nitrogen alloyed PM steel which often need not be
coated to avoid galling, sticking and adhesive wear.
A high hardness high speed PM steel with improved
compressive strength and hot hardness. Mainly used for
cutting tools.
A very high hardness high speed PM steel with very high
compressive strength, good hot hardness and very high
wear resistance. Mainly used for cutting tools.
A comprehensive product brochure is available for each steel grade and contains
information on application areas, heat treatment, machining, grinding etc.
13