Toilets - Mico Design

mico.com.au

Toilets - Mico Design

2.0.1

Toilets

Toilet Suites

Escale 2.1.1

Presqu’ile 2.1.2

Freelance 2.1.3

Ove 2.1.4

Opiaz 2.1.5

Parliament 2.1.6

Pananche 2.1.7

Odeon 2.1.8

Odeon 2.1.9

Odeon 2.1.10

Ove Raised Height 2.1.11

Purist Hatbox 2.1.12

Wall Faced Toilets

Freelance 2.2.1

Presqu’ile 2.2.2

Ove 2.2.3

Panache 2.2.4

Odeon 2.2.5

Wall Hung Toilets

Escale 2.3.1

Stillness 2.3.2

Freelance 2.3.3

Presqu’ile 2.3.4

Ove 2.3.5

Odeon 2.3.6

Component Summary

Wall hung, Wall faced toilets 2.4.1

Urinals

Patio 2.5.1

Waterless Urinals

Function & maintenance 2.6.1

Steward large 2.6.2

Steward medium 2.6.3

Steward small 2.6.4

Bidets

Escale 2.7.1

Stillness 2.7.2

Presqu’ile 2.7.3

2010


2.0.2 TOILETS

Best in Class Performance.

From water conservation to noise

reduction, KOHLER® toilets deliver

exceptional performance. All KOHLER®

toilets are easy to install and have

passed rigorous tests for premium

comfort and flush. Our bathroom

engineers have spent years developing

and perfecting our quiet but efficient

flush technology. Choose from an

extensive range, which includes

wall hung and wall faced toilets, urinals

and bidets, featuring the industry’s

largest breadth of innovative water

technologies.

Jan 2010

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz


3.3

TOILETS

2.0.3

Design Features & Benefi ts.

Vario installation

Ideal for non-standard

variable set out. A toilet

that is ‘vario’ is suitable

for both S and P-Trap

VARIO

toilets. A specific

connector is required. This is included.

S-Trap

Currently the

preferred system when

constructing new homes.

For an S-Trap (through

S TRAP

the floor), check the ‘set

out’ measurement; the distance from

the wall to the centre of the existing

waste outlet.

P-Trap

More often used in

villa and bungalow

restorations and

renovations. The P-Trap

P TRAP

(through the wall) has a

standard height and should be 185mm

(+ or – 5mm) from the floor to the centre

of the waste outlet in the wall.

WELS

The WELS water-rating label

is similar in appearance to

the energy-rating label,

which washing machines

and dishwashers must also

carry. The WELS label replaces the

voluntary water conservation rating

’AAAA’ label endorsed by the Water

Services Association of Australia.

The label shows:

A zero to six rating that allows a quick

comparative assessment of the product’s

water efficiency; the more stars on the

label the more water efficient the product.

When planning an update to your

bathroom you will need to consider

the may many different styles of toilet

available.

Back-to-Wall Toilet Suites

Rear of toilet is flush to the wall with

waste and inlet pipes concealed.

Close Coupled Toilet Suites

Rear of the toilet pan is slightly offset

from the wall. The tank merges neatly

with the pan.

Wall-Hung / Wall-Faced Toilets

The tank is concealed within the wall.

Urinals/ Bidet

KOHLER® Urinals feature wash-out

and waterless technologies that deliver

consistent, dependable performance.

Our Steward Waterless Urinals provide

outstanding functionality while displaying

innovative, stylish characteristics.

A bidet is a sit-down washbasin used for

partial bathing. Think of it as a miniature

bath installed at a comfortable sitting

height. Bidets offer the convenience of

cleaning the body without taking a bath

or shower. Using a bidet is much more

hygienic than using toilet paper alone –

for men and women.

KOHLER® bidets offer

• Less water consumption than bathing

or showering

• An ideal place to wash any part of

the body

• An easy way for elderly and physically

disabled people to maintain their

hygiene.

Care & Cleaning Tips

Soft abrasive cleaners may be used

when necessary to clean KOHLER®

vitreous china products. Strong abrasive

cleaners will scratch and dull the

surface. Use toilet bowl cleaners on the

inside of the bowl only. Do not use in-tank

toilet cleaners as they can damage the

flush valve or other working parts. Wipe

any splashes of cleaner solutions from

plastic or plated surfaces immediately.

KOHLER® Quiet-Close

is engineered to close

slowly with the slightest

touch, reducing unwanted

noise often associated with

lid slamming. Hygiene is also improved

so you only need to make minimal

contact with the seat or lid for it

to begin to gently close.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz Jan 2010


3.3

Escale ® Back to Wall Toilet Suite

TOILETS / SUITES

2.1.1

Product

• Escale back to wall toilet suite

AU Code

064127

NZ Code

530571

Kohler Code

3737A-0

Included Components

• Escale toilet pan

• Escale toilet cistern 4.5/3L

• Escale quiet close toilet seat

with metal hinge

• Vario pan connector

• Fill valve

• Floor fixing bolts and anchors

WELS RATING

(4 Star 3.3L av. flush)

Features

• Dual flush (4.5/3L)

• Backup shut-off valve located in cistern

• Bottom left inlet (standard)

• Rear left inlet (optional: additional hose and plug required)

• P-trap set out: 185mm

• S-trap set out (with vario pan connector): 90mm - 220mm

• Concealed trapway

• Open rim

• Vitreous china

Optional Accessories

• Rear inlet hose (if rear inlet required)

• Bottom inlet plug (if rear inlet required)

Related Products

• Escale basins (page 1.0.1)

• Escale whirlpool (page 4.0.1)

• Escale toilets (page 2.0.1)

• Escale furniture range (page 8.0.1)

• Escale baths (page 3.0.1)

Technical Details

Side View

Rear View

Vario Pan

Connector

Vario pan connector

S-trap installation

Minimum set out

Wall

Toilet

Outlet

90 MIN

Floor

Maximum set out

Top View

Vario Pan

Connector

Weight: Pan - 39kg Appr

Cistern - 15kg Appr

Wall

Toilet

Outlet

220 MAX

Floor

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector (supplied).

• Bottom inlet is standard. Rear inlet option available with the addition of an inlet hose and bottom inlet plug (not supplied).

• The installation of a remotely located inlet shut-off valve (not supplied) is required.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

Sizes are approximate.

All measurements shown are in millimetres. Jan 2010


2.1.10 Odeon ® Close Coupled 140mm S-Trap Toilet Suite TOILETS / SUITES

Product

• Odeon close coupled 140mm s-trap toilet suite

AU Code

061628

NZ Code

518031

Kohler Code

8781A-0

Included Components

• Odeon 140mm S-trap toilet pan

• Odeon toilet cistern 6/3L

• Odeon quiet close, quick release

toilet seat

• Fill valve

• Floor fixing bolts and anchors

WELS RATING

(3 Star 3.8L av. flush)

Features

• Dual flush (6/3L)

• Bottom right inlet

• S-trap set out:140mm

• Open rim

• Vitreous china

Related Products

• Odeon basins (page 1.0.1) • Odeon toilets (page 2.0.1) • Odeon baths (page 3.0.1)

Technical Details

Side View

Rear View

Top View

Weight: Pan - 25kg Appr

Cistern - 14kg Appr

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• Bottom inlet is standard.

• The installation of a remotely located inlet shut-off valve (not supplied) is required.

Jan 2010

Sizes are approximate.

All measurements shown are in millimetres.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz


3.3

Ove ® Raised Height Close Coupled Toilet Suite

TOILETS / SUITES

2.1.11

Product

• Ove raised height close coupled toilet suite

AU Code

NZ only

NZ Code

586047

Kohler Code

19999A-00

Included Components

• Ove toilet pan

• Ove toilet cistern 4.5/3L

• Ove quiet close toilet seat with

metal hinges

• Vario pan connector

• Fill valve

• Floor fixing bolts and anchors

WELS RATING

(4 Star 3.3L av. flush)

Features

• Dual flush (4.5/3L)

• Bottom left water inlet

• S-trap set out (with vario pan connector): 90mm - 200mm

• P-trap set out: 185mm

• Open rim

• Vitreous china

Related Products

• Ove toilets (page 2.0.1)

• Ove basins (page 1.0.1)

• Ove baths (page 3.0.1) • Ove furniture (page 8.0.1)

Technical Details

Side View

Rear View

Vario pan connector

S-trap installation

Minimum set out

Vario Pan

Connector

Wall

Toilet

Outlet

90 MIN

Floor

Maximum set out

Top View

Vario Pan

Connector

Weight: Pan - 32kg Appr

Cistern - 12kg Appr

Wall

Toilet

Outlet

200 MAX

Floor

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector (supplied).

• Bottom inlet is standard.

• The installation of a remotely located inlet shut-off valve (not supplied) is required.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

Sizes are approximate.

All measurements shown are in millimetres. Jan 2010


2.1.12 Hatbox ® TOILETS / SUITES

Product

• Purist hatbox toilet

AU Code

NZ only

NZ Code

586120

Kohler Code

3492W-0

Included Components

• Purist hatbox pan

• Purist hatbox quiet close toilet seat

• Flushing pump system

• Water supply hoses

• Waste pipe gasket

Features

• Freestanding one piece toilet

• Single flush (6L)

• Tankless design

• Comfort height seating

• Electronic soft touch push actuator

• 0.2hp flushing pump

• Siphonic waste system

• Open rim

• Vitreous china

Related Products

• Purist basins (page 1.0.1)

• Purist accessories (page 7.0.1)

• Purist whirlpool (page 4.0.1)

• Purist furniture (page 8.0.1)

• Purist tapware (page 6.0.1)

Technical Details

Side View

Rear View

Top View

Weight: Pan 59kg Appr

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• Both the electrical and water supplies can be installed on either the wall or the foor. Follow the information for your

particular installation.

• Requires a dedicated 220-250V, 5A, 50Hz service on an ELCB or RCD protected circuit.

• Waste centre line MUST be located 305mm from the wall.

Jan 2010

Sizes are approximate.

All measurements shown are in millimetres.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz


2.1.2 Presqu’ile ® Close Coupled Toilet Suite TOILETS / SUITES

Product

• Presqu’ile close coupled toilet suite

AU Code

059994

NZ Code

507153

Kohler Code

17614A-0

Included Components

• Presqu’ile toilet pan

• Presqu’ile toilet cistern 6/3L

• Presqu’ile quiet close toilet seat

with metal hinge

• Vario pan connector

• Fill valve

• Floor fixing bolts and anchors

WELS RATING

(3 Star 3.8L av. flush)

Features

• Dual flush (6/3L)

• Bottom right inlet only

• P-trap set out: 185mm

• S-trap set out (with vario pan connector): 90mm - 210mm

• Open rim

• Vitreous china

Related Products

• Presqu’ile basins (page 1.0.1)

• Presqu’ile whirlpools (page 4.0.1)

• Presqu’ile toilets (page 2.0.1) • Presqu’ile baths (page 3.0.1)

Technical Details

Side View

Rear View

Vario pan connector

S-trap installation

Minimum set out

Vario Pan

Connector

Wall

Toilet

Outlet

90 MIN

Floor

Maximum set out

Top View

Vario Pan

Connector

Weight: Pan - 30kg Appr

Cistern - 12kg Appr

Wall

Toilet

Outlet

210 MAX

Floor

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector (supplied).

• Bottom inlet is standard.

• The installation of a remotely located inlet shut-off valve (not supplied) is required.

Jan 2010

Sizes are approximate.

All measurements shown are in millimetres.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz


Freelance ® Close Coupled Toilet Suite

TOILETS / SUITES

2.1.3

Product

• Freelance close coupled toilet suite

AU Code

NZ only

NZ Code

527014

Kohler Code

17613A-00

Included Components

• Freelance toilet pan

• Freelance toilet cistern 6/3L

• Freelance quiet close toilet seat

with metal hinges

• Vario pan connector

• Fill valve

• Floor fixing bolts and anchors

Features

• Dual flush (6/3L)

• Bottom right inlet

• P-trap set out: 185mm

WELS RATING

(3 Star 3.8L av. flush)

• S-trap set out (with vario pan connector): 90mm - 220mm

• Open rim

• Vitreous china

Related Products

• Freelance basin (page 1.0.1)

• Freelance bath (page 3.0.1)

• Freelance vanity cabinet (page 8.4.1)

• Freelance tall cabinet (page 8.4.2)

• Freelance mirror (page 8.4.3)

Technical Details

Side View

Rear View

Vario Pan

Connector

Vario pan connector

S-trap installation

Minimum set out

Wall

Toilet

Outlet

90 MIN

Floor

Maximum set out

Top View

Vario Pan

Connector

Weight: Pan - 31kg Appr

Cistern - 12kg Appr

Wall

Toilet

Outlet

220 MAX

Floor

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• Bottom inlet is standard.

• The installation of a remotely located shut-off valve (not supplied) is required.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

Sizes are approximate.

All measurements shown are in millimetres. Jan 2010


3.3

2.1.4 Ove ® Close Coupled Toilet Suite TOILETS / SUITES

Product

• Ove close coupled toilet suite

AU Code

115453

NZ Code

585993

Kohler Code

19896A-0

Included Components

• Ove toilet pan

• Ove toilet cistern 4.5/3L

• Ove quiet close toilet seat

with metal hinge

• Vario pan connector

• Fill valve

• Bottom inlet plug

• Floor fixing bolts and anchors

WELS RATING

(4 Star 3.3L av. flush)

Features

• Dual flush (4.5/3L)

• Rear left inlet (standard)

• Bottom left or right inlet (optional: additional hose required)

• S-trap set out (with vario pan connector): 90mm - 200mm

• P-trap set out: 185mm

• Concealed trapway

• Open rim

• Vitreous china

Optional Accessories

• Bottom inlet hose (If bottom inlet required)

Related Products

• Ove basins (page 1.0.1) • Ove toilets (page 2.0.1) • Ove double vanity (page 8.5.1)

Technical Details

Side View

Rear View

Vario pan connector

S-trap installation

Minimum set out

Vario Pan

Connector

Wall

Toilet

Outlet

90 MIN

Floor

Maximum set out

Top View

Vario Pan

Connector

Weight: Pan - 28kg Appr

Cistern - 12kg Appr

Wall

Toilet

Outlet

200 MAX

Floor

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector (supplied).

• Rear inlet comes as standard. Bottom inlet option available with the addition of a bottom inlet hose.

• The installation of a remotely located inlet shut-off valve (not supplied) is required.

Jan 2010

Sizes are approximate.

All measurements shown are in millimetres.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz


3.3

Opiaz ® Back to Wall Toilet Suite

TOILETS / SUITES

2.1.5

Product

• Opiaz back to wall toilet suite

AU Code

052254

NZ Code

578633

Kohler Code

3735A-0

Included Components

• Opiaz toilet pan

• Opiaz toilet tank 4.5/3L

• Opiaz quiet close quick release

toilet seat

• Vario pan connector

• Fill valve

• Bottom inlet plug

• Floor fixing bolts and anchors

WELS RATING

(4 Star 3.3L av. flush)

Features

• Dual flush (4.5/3L)

• Backup shut-off valve located in cistern

• Rear left inlet (standard)

• Bottom left inlet (optional: additional hose required)

• S-trap set out (with vario pan connector): 90mm - 160mm

• P-trap set out: 185mm

• Box rim

• Vitreous china

Optional Accessories

• Bottom inlet hose (if bottom inlet required)

Technical Details

Side View

Rear View

Vario pan connector

S-trap installation

Minimum set out

Vario Pan

Connector

Wall

Toilet

Outlet

90 MIN

Floor

Maximum set out

Top View

Vario Pan

Connector

Weight: Pan - 35kg Appr

Cistern - 12kg Appr

Wall

Toilet

Outlet

160 MAX

Floor

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector (supplied).

• Rear inlet comes as standard. Bottom inlet option available with the addition of a bottom inlet hose.

• The installation of a remotely located inlet shut-off valve (not supplied) is required.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

Sizes are approximate.

All measurements shown are in millimetres. Jan 2010


3.3

2.1.6 Parliament ® Back to Wall Toilet Suite TOILETS / SUITES

Product

• Parliament back to wall toilet suite

AU Code

115292

NZ Code

586042

Kohler Code

4346A-0

Included Components

• Parliament toilet pan

• Parliament toilet cistern 4.5/3L

• Parliament quiet close, quick release

toilet seat

• Vario pan connector

• Fill valve

• Floor fixing bolts and anchors

Features

• Dual flush (4.5/3L)

• Backup shut-off valve located in cistern

• Rear left inlet (standard)

• Bottom left inlet (optional: additional hose required)

• S-trap set out (with vario pan connector): 90mm - 140mm

• P-trap set out: 185mm

• Box rim

• Vitreous china

Optional Accessories

• Bottom inlet hose (if bottom inlet required)

WELS RATING

(4 Star 3.3L av. flush)

Related Products

• Parliament basins (page 1.0.1)

Technical Details

Side View

Rear View

Vario pan connector

S-trap installation

Vario Pan

Connector

Minimum set out

Wall

Toilet

Outlet

90 MIN

Floor

Maximum set out

Top View

Vario Pan

Connector

Weight: Pan - 32kg Appr

Cistern - 15kg Appr

Wall

Toilet

Outlet

140 MAX

Floor

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector (supplied).

• Rear inlet comes as standard. Bottom inlet option available with the addition of a bottom inlet hose.

• The installation of a remotely located inlet shut-off valve (not supplied) is required.

Jan 2010

Sizes are approximate.

All measurements shown are in millimetres.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz


Panache ® Close Coupled Toilet Suite

TOILETS / SUITES

2.1.7

Product

• Panache close coupled toilet suite

AU Code

115286

NZ Code

578637

Kohler Code

3736A-0

Included Components

• Panache toilet pan

• Panache toilet cistern 4.5/3L

• Panache quiet close, quick

release toilet seat

• Vario pan connector

• Fill valve

• Bottom inlet plug

• Floor fixing bolts and anchors

WELS RATING

(4 Star 3.3L av. flush)

Features

• Dual flush (4.5/3L)

• Bottom left or right inlet

• S-trap set out (with vario pan connector): 90mm - 220mm

• P-trap set out: 185mm

• Box rim

• Vitreous china

Related Products

• Panache basins (page 1.0.1) • Panache toilets (page 2.0.1) • Panache tapware (page 6.0.1)

Technical Details

Side View

Rear View

Vario pan connector

S-trap installation

Minimum set out

Vario Pan

Connector

Wall

Toilet

Outlet

90 MIN

Floor

Maximum set out

Top View

Vario Pan

Connector

Weight: Pan - 23kg Appr

Cistern - 9kg Appr

Wall

Toilet

Outlet

220 MAX

Floor

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• Can be installed as a P-trap using a straight connector (not supplied) or as an S-trap using the vario connector (supplied).

• Bottom inlet is standard.

• The installation of a remotely located inlet shut-off valve (not supplied) is required.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

Sizes are approximate.

All measurements shown are in millimetres. Jan 2010


2.1.8 Odeon ® Close Coupled 185mm P-Trap Toilet Suite TOILETS / SUITES

Product

• Odeon close coupled 185mm p-trap toilet suite

AU Code

061603

NZ Code

527017

Kohler Code

17615A-0

Included Components

• Odeon 185mm P-trap toilet pan

• Odeon toilet cistern 6/3L

• Odeon quiet close, quick

release toilet seat

• Fill valve

• Floor fixing bolts and anchors

WELS RATING

(3 Star 3.8L av. flush)

Features

• Dual flush (6/3L)

• Bottom right inlet

• P-trap set out: 185mm

• Open rim

• Vitreous china

Related Products

• Odeon basins (page 1.0.1) • Odeon toilets (page 2.0.1) • Odeon baths (page 3.0.1)

Technical Details

Side View

Rear View

Top View

Weight: Pan -25kg Appr

Cistern - 14kg Appr

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• Bottom inlet is standard.

• The installation of a remotely located wall shut-off valve (not supplied) is required.

Jan 2010

Sizes are approximate.

All measurements shown are in millimetres.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz


Odeon ® Close Coupled 235mm S-Trap Toilet Suite

TOILETS / SUITES

2.1.9

Product

• Odeon close coupled 235mm s-trap toilet suite

AU Code

061602

NZ Code

527020

Kohler Code

17623A-0

Included Components

• Odeon 235mm S-trap toilet pan

• Odeon toilet cistern 6/3L

• Odeon quiet close, quick release

toilet seat

• Pan offset collar

• Fill valve

• Floor fixing bolts and anchors

WELS RATING

(3 Star 3.8L av. flush)

Features

• Dual flush (6/3L)

• Bottom right inlet

• S-trap set out: 220mm & 235mm

(220mm obtained using the supplied pan offset collar)

• Open rim

• Vitreous china

Related Products

• Odeon basins (page 1.0.1) • Odeon toilets (page 2.0.1) • Odeon baths (page 3.0.1)

Technical Details

Side View

Rear View

220mm S-trap pan offset

collar installation

Wall

Pan offset collar

Floor

Top View

Weight: Pan - 25kg Appr

Cistern - 14kg Appr

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• The supplied pan has a 235mm set out. To obtain a set out of 220mm a pan offset collar (supplied)

must be used with the pan.

• Bottom inlet is standard.

• The installation of a remotely located inlet shut-off valve (not supplied) is required.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

Sizes are approximate.

All measurements shown are in millimetres. Jan 2010


Freelance ® Wall Faced Toilet

TOILETS / WALL FACED

2.2.1

Product

• Freelance wall faced toilet

AU Code

NZ only

NZ Code

588688

Kohler Code

4880A-0

Included Components

• Freelance toilet pan

• Freelance quiet close toilet seat

with metal hinge

• In wall cistern 88mm 6/3L

Note: component codes page 2.4.1

WELS RATING

(3 Star 3.8L av. flush)

• Fixing brackets and bolts

• Flush button panel

• Floor fixing bolts and anchors

Features

• In wall cistern - with support brackets

• Dual flush (6/3L)

• Back up shut-off valve located on cistern and

accessible through the flush button panel.

• P-trap setout: 185mm

• Open rim

• Vitreous china

Related Products

• Freelance basin (page 1.0.1)

• Freelance vanity cabinet (page 8.4.1)

• Freelance tall cabinet (page 8.4.2) • Freelance mirror (page 8.4.3)

Technical Details

Side View

Rear View

In wall cistern

Top View

In wall cistern installation

Weight: Pan - 25kg Appr

Cistern - 5kg Appr

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• The in wall cistern is designed to be fixed to 600mm centre studs using 10 wood screws (not supplied).

• In wall cistern support brackets (supplied) are fixed to the studs first, then the in wall cistern (supplied) is fixed to the

brackets using bolts (supplied).

• The flush button panel (supplied) can be cut so that it sits flush with the wall.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

Sizes are approximate.

All measurements shown are in millimetres. Jan 2010


2.2.2 Presqu’ile ® Wall Faced Toilet TOILETS / WALL FACED

Product

• Presqu’ile wall faced toilet

AU Code

NZ only

NZ Code

588607

Kohler Code

2666A-0

Included Components

• Presqu’ile toilet pan

• Presqu’ile quiet close toilet seat

with metal hinge

• In wall cistern 88mm 6/3L

Note: component codes page 2.4.1

• Fixing brackets and bolts

• Flush button panel

• Floor fixing bolts and anchors

WELS RATING

(3 Star 3.8L av. flush)

Features

• In wall cistern - with support brackets

• Dual flush (6/3L)

• Back up shut-off valve located on cistern

and accessible through the flush button panel.

• P-trap set out: 185mm

• Open rim

• Vitreous china

Related Products

• Presqu’ile basins (page 1.0.1)

• Presqu’ile whirlpools (page 4.0.1)

• Presqu’ile toilets (page 2.0.1) • Presqu’ile baths (page 3.0.1)

Technical Details

Side View

Rear View

In wall cistern

Top View

In wall cistern installation

Weight: Pan - 15kg Appr

Cistern - 5kg Appr

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• The in wall cistern is designed to be fixed to 600mm centre studs using 10 wood screws (not supplied).

• In wall cistern support brackets (supplied) are fixed to the studs first, then the in wall cistern (supplied) is fixed to the

brackets using bolts (supplied).

• The flush button panel (supplied) can be cut so that it sits flush with the wall.

Jan 2010

Sizes are approximate.

All measurements shown are in millimetres.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz


Ove ® Wall Faced Toilet

TOILETS / WALL FACED

2.2.3

Product

• Ove wall faced toilet

AU Code

NZ only

NZ Code

588461

Kohler Code

18611A-0

Included Components

• Ove toilet pan

• Ove quiet close toilet seat

with metal hinge

• In wall cistern 88mm 6/3L

Note: component codes page 2.4.1

• Fixing brackets and bolts

• Flush button panel

• Floor fixing bolts and anchors

Features

• In wall cistern - with support brackets

• Dual flush (6/3L)

• Back up shut-off valve located on cistern and

accessible through the flush button panel.

• P-trap set out: 185mm

• Open rim

• Vitreous china

Related Products

• Ove basins (page 1.0.1)

• Ove furniture (page 8.0.1)

• Ove toilets (page 2.0.1) • Ove baths (page 3.0.1)

Technical Details

Side View

Rear View

In wall cistern

Top View

In wall cistern installation

Weight: Pan - 25kg Appr

Cistern - 5kg Appr

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• The in wall cistern is designed to be fixed to 600mm centre studs using 10 wood screws (not supplied).

• In wall cistern support brackets (supplied) are fixed to the studs first, then the in wall cistern (supplied) is fixed to the

brackets using bolts (supplied).

• The flush button panel (supplied) can be cut so that it sits flush with the wall.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

Sizes are approximate.

All measurements shown are in millimetres. Jan 2010


3.3

2.2.4 Panache ® Wall Faced Toilet TOILETS / WALL FACED

Product

• Panache wall faced toilet

AU Code

115455

NZ Code

586127

Kohler Code

18613A-0

Included Components

• Panache toilet pan

• Panache quiet close, quick

release toilet seat

• In wall cistern 88mm 4.5/3L

Note: component codes page 2.4.1

• Fixing brackets and bolts

• Flush button panel

• Floor fixing bolts and anchors

WELS RATING

(4 Star 3.3L av. flush)

Features

• In wall cistern - with support brackets

• Dual flush (4.5/3L)

• Back up shut-off valve located on cistern and

accessible through the flush button panel

• P-trap set out: 185mm

• Box rim

• Vitreous china

Related Products

• Panache basins (page 1.0.1) • Panache toilets (page 2.0.1) • Panache tapware (page 6.0.1)

Technical Details

Side View

Rear View

In wall cistern

Top View

In wall cistern installation

Weight: Pan - 15kg Appr

Cistern - 10kg Appr

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• The in wall cistern is designed to be fixed to 600mm centre studs using 10 wood screws (not supplied).

• In wall cistern support brackets (supplied) are fixed to the studs first, then the in wall cistern (supplied) is fixed to the

brackets using bolts (supplied).

• The flush button panel (supplied) can be cut so that it sits flush with the wall.

Jan 2010

Sizes are approximate.

All measurements shown are in millimetres.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz


Odeon ® Wall Faced Toilet

TOILETS / WALL FACED

2.2.5

Product

• Odeon wall faced toilet

AU Code

115451

NZ Code

586129

Kohler Code

18612A-0

Included Components

• Odeon toilet pan

• Odeon quiet close, quick release

toilet seat

• In wall cistern 88mm 6/3L

Note: component codes page 2.4.1

• Fixing brackets and bolts

• Flush button panel

• Floor fixing bolts and anchors

WELS RATING

(3 Star 3.8L av. flush)

Features

• In wall cistern - with support brackets

• Dual flush (6/3L)

• Back up shut-off valve located on cistern and

accessible through the flush button panel.

• P-trap set out: 185mm

• Open rim

• Vitreous china

Related Products

• Odeon basins (page 1.0.1) • Odeon toilets (page 2.0.1) • Odeon baths (page 3.0.1)

Technical Details

Side View

Rear View

In wall cistern

Top View

In wall cistern installation

Weight: Pan - 23kg Appr

Cistern - 5kg Appr

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• The in wall cistern is designed to be fixed to 600mm centre studs using 10 wood screws (not supplied).

• In wall cistern support brackets (supplied) are fixed to the studs first, then the in wall cistern (supplied) is fixed to the

brackets using bolts (supplied).

• The flush button panel (supplied) can be cut so that it sits flush with the wall.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

Sizes are approximate.

All measurements shown are in millimetres. Jan 2010


3.3

2.3.1 Escale ® Wall Hung Toilet TOILETS / WALL HUNG

Product

• Escale wall hung toilet

AU Code

115450

NZ Code

586048

Kohler Code

2664A-0

Included Components

• Escale P-trap toilet pan

• Escale quiet close toilet seat with

metal hinges

• In wall cistern 88mm 4.5/3L

Note: component codes page 2.4.1

• Flush button panel

• Waste & inlet straight connection pipes

• Waste pipe gasket

• Wall fixing bolts

• Chrome fixing bolt caps

WELS RATING

(4 Star 3.3L av. flush)

Features

• In wall cistern - fully framed

• Dual flush (4.5/3L)

• Back up shut-off valve located on cistern and

accessible through the flush button panel

• P-trap set out: 185mm

• Open rim

• Vitreous china

Related Products

• Escale basins (page 1.0.1)

• Escale drop-in whirlpool (page 4.0.1)

• Escale toilets (page 2.0.1) • Escale drop-in bath (page 3.0.1)

Technical Details

Side View

Rear View

In wall cistern

Top View

Weight: Pan - 33.5kg Appr

Cistern - 10kg Appr

In wall cistern

installation

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• The in wall cistern has an adjustable height and is designed to be fixed to the floor and noggin using the appropriate

bolts (not supplied).

• The waste outlet and water inlet are connected via straight pipes (supplied) cut to length.

• The flush button panel (supplied) can be cut so that it sits flush with the wall.

Jan 2010

Sizes are approximate.

All measurements shown are in millimetres.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz


Stillness ® Wall Hung Toilet

TOILETS / WALL HUNG

2.3.2

Product

• Stillness wall hung toilet

• Metal shroud

AU Code

NZ only

NZ only

NZ Code

588606

588623

Kohler Code

2663A-0

E75629-39R

Included Components

• Stillness P-trap toilet pan

• Stillness quiet close toilet seat

with metal hinges

• In wall cistern 88mm 6/3L

Note: component codes page 2.4.1

• Flush button panel

• Waste & inlet straight connection pipes

• Waste pipe gasket

• Wall fixing bolts

Features

• In wall cistern - fully framed

• Dual flush (6/3L)

• Back up shut-off valve located on cistern and

accessible through the flush button panel

• P-trap set out: 185mm

• Open rim

• Vitreous china

Optional Accessories

• Metal shroud in brushed metal finish

Related Products

• Stillness tapware (page 6.0.1) • Stillness accessories (page 7.0.1) • Stillness furniture (page 8.0.1)

Technical Details

Side View

Rear View

In wall cistern

Top View

In wall cistern installation

Weight: Pan - 26kg Appr

Cistern - 10kg Appr

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• The in wall cistern has an adjustable height and is designed to be fixed to the floor and noggin using the appropriate

bolts (not supplied).

• The waste outlet and water inlet are connected via straight pipes (supplied) cut to length.

• The flush button panel (supplied) can be cut so that it sits flush with the wall.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

Sizes are approximate.

All measurements shown are in millimetres. Jan 2010


2.3.3 Freelance ® Wall Hung Toilet TOILETS / WALL HUNG

Product

• Freelance wall hung toilet

AU Code

NZ only

NZ Code

586049

Kohler Code

2667A-0

Included Components

• Freelance P-trap toilet pan

• Freelance quiet close toilet seat

with metal hinges

• In wall cistern 88mm 6/3L

Note: component codes page 2.4.1

• Flush button panel

• Waste & inlet straight connection pipes

• Waste pipe gasket

• Wall fixing bolts

WELS RATING

(3 Star 3.8L av. flush)

Features

• In wall cistern - fully framed

• Dual flush (6/3L)

• Back up shut-off valve located on cistern and

accessible through the fush button panel

• P-trap set out: 185mm

• Open rim

• Vitreous china

Related Products

Freelance toilets (page 2.0.1)

Freelance basins (page 1.0.1)

Freelance bath (page 3.0.1) Freelance furniture (page 8.0.1)

Technical Details

Side View

Rear View

In wall cistern

Top View

Weight: Pan - 20kg Appr

Cistern - 10kg Appr

In wall cistern

installation

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• The in wall cistern has an adjustable height and is designed to be fixed to the floor and noggin using the appropriate

bolts (not supplied).

• The waste outlet and water inlet are connected via straight pipes (supplied) cut to length.

• The flush button panel (supplied) can be cut so that it sits flush with the wall.

Jan 2010

Sizes are approximate.

All measurements shown are in millimetres.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz


Presqu’ile ® Wall Hung Toilet

TOILETS / WALL HUNG

2.3.4

Product

• Presqu’ile wall hung toilet

AU Code

115456

NZ Code

585990

Kohler Code

2665A-0

Included Components

• Presqu’ile P-trap toilet pan

• Presqu’ile quiet close toilet seat

with metal hinges

• In wall cistern 88mm 6/3L

Note: component codes page 2.4.1

• Flush button panel

• Waste & inlet straight connection pipes

• Waste pipe gasket

• Wall fixing bolts

WELS RATING

(3 Star 3.8L av. flush)

Features

• In wall cistern - fully framed

• Dual flush (6/3L)

• Back up shut-off valve located on cistern and

accessible through the flush button panel

• P-trap set out: 185mm

• Open rim

• Vitreous china

Related Products

• Presqu’ile basins (page 1.0.1)

• Presqu’ile whirlpools (page 4.0.1)

• Presqu’ile toilets (page 2.0.1) • Presqu’ile baths (page 3.0.1)

Technical Details

Side View

Rear View

In wall cistern

Top View

In wall cistern

installation

Weight: Pan -21kg Appr

Cistern - 10kg Appr

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• The in wall cistern has an adjustable height and is designed to be fixed to the floor and noggin using the appropriate

bolts (not supplied).

• The waste outlet and water inlet are connected via straight pipes (supplied) cut to length.

• The flush button panel (supplied) can be cut so that it sits flush with the wall.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

Sizes are approximate.

All measurements shown are in millimetres. Jan 2010


3.3

2.3.5 Ove ® Wall Hung Toilet TOILETS / WALL HUNG

Product

• Ove wall hung toilet

AU Code

115454

NZ Code

585994

Kohler Code

18610A-0

Included Components

• Ove P-trap toilet pan

• Ove quiet close toilet seat with

metal hinges

• In wall cistern 88mm 4.5/3L

Note: component codes page 2.4.1

• Flush button panel

• Waste & inlet straight connection pipes

• Waste pipe gasket

• Wall fixing bolts

WELS RATING

(3 Star 3.4L av. flush)

Features

• In wall cistern - fully framed

• Dual flush (4.5/3L)

• Back up shut-off valve located on cistern and

accessible through the flush button panel

• P-trap set out: 185mm

• Open rim

• Vitreous china

Related Products

• Ove basins (page 1.0.1) • Ove toilets (page 2.0.1) • Ove drop-in bath (page 3.0.1)

Technical Details

Side View

Rear View

In wall cistern

Top View

Weight: Pan - 33.5kg Appr

Cistern - 10kg Appr

In wall cistern

installation

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• The in wall cistern has an adjustable height and is designed to be fixed to the floor and noggin using the appropriate

bolts (not supplied).

• The waste outlet and water inlet are connected via straight pipes (supplied) cut to length.

• The flush button panel (supplied) can be cut so that it sits flush with the wall.

Jan 2010

Sizes are approximate.

All measurements shown are in millimetres.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz


Odeon ® Wall Hung Toilet

TOILETS / WALL HUNG

2.3.6

Product

• Odeon wall hung toilet

AU Code

115452

NZ Code

586128

Kohler Code

ODEWH

Included Components

• Odeon P-trap toilet pan

• Odeon quiet close, quick

release toilet seat

• In wall cistern 88mm 6/3L

Note: component codes page 2.4.1

• Flush button panel

• Waste & inlet straight

connection pipes

• Waste pipe gasket

• Wall fixing bolts

WELS RATING

(3 Star 3.8L av. flush)

Features

• In wall cistern - fully framed

• Dual flush (6/3L)

• Back up shut-off valve located on cistern and

accessible through the flush button panel

• P-trap set out: 185mm

• Open rim

• Vitreous china

Related Products

• Odeon basins (page 1.0.1) • Odeon toilets (page 2.0.1) • Odeon baths (page 3.0.1)

Technical Details

Side View

Rear View

In wall cistern

Top View

Weight: Pan - 14kg Appr

Cistern - 10kg Appr

In wall cistern

installation

Installation Notes:

• Water supply pressure range: 20 psi (137 kPa) - 80 psi (551 kPa).

• The in wall cistern has an adjustable height and is designed to be fixed to the floor and noggin using the appropriate

bolts (not supplied).

• The waste outlet and water inlet are connected via straight pipes (supplied) cut to length.

• The flush button panel (supplied) can be cut so that it sits flush with the wall.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

Sizes are approximate.

All measurements shown are in millimetres. Jan 2010


2.4.1 Component Codes - Wall faced / Wall hung toilet suites TOILETS

PG WALL FACED Kohler Code Crane AU Code Crane NZ Code WELS Rating av. flush

2.2.1 Freelance wall faced toilet suite 4880A-0 NZ Only 588688 3 Star (3.8L)

Freelance toilet pan wall faced (incl. quiet close seat) 1090W-00 588667

6/3L Inwall tank system 88mm with plate 10610A-CP 603914

2.2.2 Presqu’ile wall faced toilet suite 2666A-0 NZ Only 588607 3 Star (3.8L)

Presqu’ile toilet pan wall faced 11162A-0 507181

Presqu’ile toilet seat quiet close 2550A-0 587821

6/3L Inwall tank system 88mm with plate 10610A-CP 603914

2.2.3 Ove wall faced toilet suite 18611A-0 NZ Only 588461 N/A

Ove wall faced pan 19965W-00 596724

Ove toilet seat quiet-close 2552A-0 587802

4.5/3L Inwall tank system 88mm with plate 10611A-CP 588556

2.2.4 Panache wall faced toilet suite 18613A-0 115455 586127 4 Star (3.4L)

Panache wall faced toilet pan 18154A-0 115237 587825

Panache toilet seat quiet close 17745A-0 115180 578640

4.5/3L Inwall tank system 88mm with plate 10611A-CP 116100 588556

2.2.5 Odeon wall faced toilet suite 18612A-0 115451 586129 3 Star (3.8L)

Odeon toilet pan wall faced (incl. quiet close seat) 19049A-0 064213 587981

6/3L In wall tank system 88mm with plate 10610A-CP 116101 588556

PG WALL HUNG Kohler Code Crane AU Code Crane NZ Code WELS Rating av. flush

2.3.1 Escale wall hung toilet suite 2664A-0 115450 586048 4 Star (3.3L)

Escale toilet pan wall hung 19045A-00 115254 587819

Escale toilet seat quiet close E70004-FT-0 115449 587801

4.5/3L In wall tank 88mm with plate 3739A-CP 115288 586121

2.3.2 Stillness suite wall hung toilet suite 2663A-0 NZ Only 588606 N/A

Stillness toilet pan wall hung (incl. quiet close seat) 2537W-00 604044

6/3L In wall tank 88mm with plate 3738A-CP 586122

2.3.4 Presqu’ile wall hung toilet suite 2665A-0 115456 585990 3 Star (3.8L)

Presquile toilet pan wall hung p-trap (incl. quiet close seat) 19080A-00 115255 587820

6/3L In wall tank 88mm with plate 3738A-CP 115287 586122

2.3.5 Freelance suite wall hung suite 2667A-0 NZ Only 586049 3 Star (3.8L)

Freelance toilet pan wall hung (incl. quiet close seat) 19461A-00 587822

6/3L In wall tank 88mm with plate 3738A-CP 586122

2.3.6 Ove wall hung toilet suite 18610A-0 115454 585994 3 Star (3.4L)

Ove toilet pan wall hung 19957A-0 115266 587823

Ove toilet seat quiet close 2552A-0 115282 587802

4.5/3L In wall tank 88mm with plate 3739A-CP 115288 586121

2.3.7 Odeon wall hung toilet suite ODEWH 115452 586128 3 Star (3.8L)

Odeon toilet pan wall hung 8750T-0 115320 587824

Odeon toilet seat quiet close 17754A-0 115181 587816

6/3L In wall tank 88mm with plate 3738A-CP 115287 586122

Jan 2010

Sizes are approximate.

All measurements shown are in millimetres.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz


Licence No 0600

Water Consumption

litres per flush per stall

When tested in accordance with Standard AS/NZS 6400

For more information and to compare

products, refer to:

www.waterrating.gov.au

Patio ® Urinal

TOILETS / URINALS

2.5.1

Product

• Patio urinal

AU Code

115246

NZ Code

586006

Kohler Code

18645A-0

Included Components

• Plastic trap and waste seal

• Plastic outlet pipe

• Braided stainless steel inlet

hose (1/2” BSP)

• Fixing bolts, anchors and hangers

The more

stars the more

water efficient

WATER

RATING

A joint government and industry program

2.5

WELS RATING

(2 Star 2.5L av. flush)

Features

• Rear water inlet

• Removable chrome waste

• Vitreous china

Required Accessories

• Flushing unit / system

Related Products

• Patio baths (page 3.0.1)

Technical Details

Side View Rear View Waste outlet setup

Water inlet

Wall

Wall

hangers

Waste outlet

pipe

Urinal waste

outlet

Plastic

trap

Floor

Outlet

connector

Weight: 17kg Appr

Installation Notes:

• Water supply inlet is via a 600mm braided stainless steel hose with 1/2” BSP connections.

• The urinal’s waste outlet is connected to the waste outlet pipe via a plastic trap and 50mm plastic outlet connector

(supplied), which fits into the waste outlet pipe. The outlet connector’s length can be cut to suit.

• The trap and pipe are installed to the waste outlet pipe first, then the urinal is lowered into position onto the trap and hangers.

• Meets urinal standard ASNZ2 3982.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

Sizes are approximate.

All measurements shown are in millimetres. Jan 2010


2.6.1 Waterless ® Urinals TOILETS / URINALS

Function & Maintenance.

Functionality

Liquid waste passes

into the fully glazed

trapway through

the debris-catching

strainer.

The unique design of

the trapway slows the

flow of liquid, ensuring

that the sealing liquid

isn’t washed out of the

trapway.

Being less dense than liquid waste, the

sealing liquid maintains its position at

the top of the trapway, thus providing

a barrier to block trapway odors.

Through simple displacement, the

liquid waste then makes its way into

the waste pipe.

Retrofit Advantages

Due to an integral

trapway design, most

wall-hung

retrofit installations

require no rough-in

changes to the

waste pipe.

A universal mounting

bracket will fit onto most urinal

collars in the industry, allowing the

installer to use the existing urinal

collar in many cases.

The large, clean footprint of KOHLER®

waterless urinals minimizes the need

for aesthetic changes (tiling, painting,

etc.) in a retrofit installation.

KOHLER ® Waterless Urinal

Maintenance

As with any plumbing product, routine

maintenance is essential to ensuring

optimal performance and a clean

appearance. With their cartridge-free

design however, KOHLER ® waterless

urinals are significantly easier to maintain

than catridge-based or water-based

urinals. The KOHLER ® Waterless Urinal

Sealing Liquid and KOHLER ® Water

Urinal Cleaner are the only products

required for proper maintenance.

Daily Maintenance

Recommended daily maintenance

requires spraying down the outside

surfaces with the KOHLER ® Waterless

Urinal Cleaner and wiping them clean.

Bimonthly Flushout*

STEP ONE

Remove strainer, pour 5 litres of water

into the trapway to purge the system

of liquid waste and old sealing liquid.

STEP TWO

Pour 25ml of KOHLER ® Waterless

Urinal Cleaner directly into the drain.

Wait 5 minutes.

STEP THREE

Pour 10 litres of water into the trapway

to clear any remaining liquid waste

and help further clean the waste lines.

STEP FOUR

Replenish the urinal with 75ml (or fill 2/3

of the cap) of KOHLER ® Waterless

Urinal Sealing Liquid and return the

strainer to the trapway opening.

*Flushout cycles vary, depending upon

usage volume.

step one

step two

step three

step four

Stewart Urinal Required Cleaners

• KOHLER ® Waterless Urinal Sealing Liquid 5L - pack of 4

• KOHLER ® Waterless Urinal Cleaner 1L - pack of 12

AU Code

112955

112954

NZ Code

589173

589174

Kohler Code

1048656-P

1048657-P

Jan 2010

Sizes are approximate.

All measurements shown are in millimetres.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz


Steward ® Large Waterless Urinal

TOILETS / URINALS

2.6.2

Product

• Steward large waterless urinal

AU Code

115299

NZ Code

586003

Kohler Code

4919-0

Included Components

• Chrome strainer

• Universal mounting bracket

• Outlet collar

• Hangers

• Fixing screws and bolts

• Urinal sealing liquid sample

• Urinal cleaner sample

Features

• Waterless

• Cartridge-free integral trapway

• Trapway design and sealing liquid minimises odours

• Touch-free use

• Removable chrome strainer

• Vitreous china

Additional Items Required

• Urinal sealing liquid (page 2.5.1)

• Urinal cleaner (page 2.5.1)

Related Products

• Urinals (page 2.0.1)

Technical Details

Side View Rear View Waste outlet setup

Wall

Wall

hangers

Waste Outlet

pipe

Bracket and

collar

Integrated

trap

Floor

Weight: 42kg Appr

Installation Notes:

• Large, clean footprint simplifies installation without tiling or rough-in changes.

• To install, hangers (supplied) are fixed to the wall. A universal bracket (supplied) and collar (supplied) are fitted to the

waste outlet pipe. The urinal is then lowered onto the hangers . Once in place the urinal is bolted to the universal bracket.

• Universal bracket fits most urinal collars, allowing use of the existing urinal collar in many cases.

• Install adequate support framing for the hangers as required.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

Sizes are approximate.

All measurements shown are in millimetres. Jan 2010


2.6.3 Steward ® Medium Waterless Urinal TOILETS / URINALS

Product

• Steward medium waterless urinal

AU Code

115298

NZ Code

586004

Kohler Code

4918-0

Included Components

• Chrome strainer

• Universal mounting bracket

• Outlet collar

• Hangers

• Fixing screws and bolts

• Urinal sealing liquid sample

• Urinal cleaner sample

Features

• Waterless

• Cartridge-free integral trapway

• Trapway design and sealing liquid minimises odours

• Touch-free use

• Removable chrome strainer

• Vitreous china

Additional Items Required

• Urinal sealing liquid (page 2.5.1)

• Urinal cleaner (page 2.5.1)

Related Products

• Steward urinals (page 2.0.1)

Technical Details

Side View Rear View Waste outlet setup

Wall

Wall

hangers

Waste outlet

pipe

Bracket and

collar

Integrated

trap

Floor

Weight: 30 kg Appr

Installation Notes:

• To install, hangers (supplied) are fixed to the wall. A universal bracket (supplied) and collar (supplied) are fitted to the

waste outlet pipe. The urinal is then lowered onto the hangers. Once in place the urinal is bolted to the universal bracket.

• Universal bracket fits most urinal collars, allowing use of the existing urinal collar in many cases.

• Install adequate support framing for the hangers as required.

Jan 2010

Sizes are approximate.

All measurements shown are in millimetres.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz


Steward ® Small Waterless Urinal

TOILETS / URINALS

2.6.4

Product

• Steward small waterless urinal

AU Code

115297

NZ Code

586005

Kohler Code

4917-0

Included Components

• Chrome strainer

• Universal mounting bracket

• Outlet collar

• Hangers

• Fixing screws and bolts

• Urinal sealing liquid sample

• Urinal cleaner sample

Features

• Waterless

• Cartridge-free integral trapway

• Trapway design and sealing liquid minimises odours

• Touch-free use

• Removable chrome strainer

• Vitreous china

Additional Items Required

• Urinal sealing liquid (page 2.5.1)

• Urinal cleaner (page 2.5.1)

Related Products

• Urinals (page 2.0.1)

Technical Details

Side View Rear View Waste outlet setup

Wall

Wall

hangers

Waste outlet

pipe

Bracket and

collar

Integrated

trap

Floor

Weight: 25kg Appr

Installation Notes:

• To install, hangers (supplied) are fixed to the wall. A universal bracket (supplied) and collar (supplied) are fitted to the

waste outlet pipe. The urinal is then lowered onto the hangers. Once in place the urinal is bolted to the universal bracket.

• Universal bracket fits most urinal collars, allowing use of the existing urinal collar in many cases.

• Install adequate support framing for the hangers as required.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

Sizes are approximate.

All measurements shown are in millimetres. Jan 2010


2.7.1 Escale ® Bidet TOILETS / BIDETS

Product

• Escale bidet

AU Code

115253

NZ Code

585989

Kohler Code

19044A-00

Included Components

• Chrome overflow cover

• Wall fixing bracket and clamping assembly

Features

• 1 tap hole

• Overflow

• Concealed wall fixing

• Vitreous china

Optional Accessories

• Low profile P-trap

• Wastes (page 1.7.1)

• Tapware (page 6.0.1)

Tapware and waste not included

Related Products

• Escale basins (page 1.0.1)

• Escale drop-in whirlpool (page 4.0.1)

• Escale toilets (page 2.0.1)

• Escale furniture (page 8.0.1)

• Escale drop-in bath (page 3.0.1)

Technical Details

Side View Rear View Bidet installation

Wall

Top View

Floor

Weight: 24kg

Installation Notes:

• Bidet fixing is done via the overflow hole allowing the fixings to remain hidden. This is achieved by attaching the wall

bracket (supplied) to the wall and connecting the clamping assembly (supplied) to the bidet. The clamping assembly is

then connected to the wall bracket and tightened through the overflow hole. This pulls and holds the bidet to the wall.

• Due to the bidet’s waste height, the use of a low profile P-trap (not supplied) is recommended as it will make

installation easier.

• The installation of a remotely located inlet shut-off valve (not supplied) for the water supply is recommended.

Jan 2010

Sizes are approximate.

All measurements shown are in millimetres.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz


Stillness ® Bidet

TOILETS / BIDETS

2.7.2

Product

• Stillness wall hung bidet

• Metal shroud

AU Code

NZ only

NZ only

NZ Code

588605

588623

Kohler Code

2538W-00

E75629-39R

Included Components

• Chrome overflow cover

• Wall fixing bolts and anchors

Features

• 1 tap hole

• Overflow outlet

• Vitreous china

Optional Accessories

• Metal shroud in brushed metal finish

• Tapware (page 6.0.1)

Tapware and waste not included

Related Products

• Stillness accessories (page 7.0.1) • Stillness furniture (page 8.0.1)

Technical Details

Side View

Rear View

Bidet installation

Top View

Weight: 26kg

Installation Notes:

• Bidet fixing is done via holes located on the side of the bidet.

• Due to the bidet’s waste height, the use of a low profile P-trap (not supplied) is recommended as it will make

installation easier.

• The installation of a remotely located inlet shut-off valve (not supplied) for the water supply is recommended.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

Sizes are approximate.

All measurements shown are in millimetres. Jan 2010


2.7.3 Presqu’ile ® Bidet TOILETS / BIDETS

Product

• Presqu’ile bidet

AU Code

115033

NZ Code

585991

Kohler Code

11164A-0

Included Components

• Chrome overflow cover

• Floor fixing bolts and anchors

• Chrome floor fixing hole covers

Features

• 1 Tap hole

• Overflow

• Vitreous china

Optional Accessories

• Tapware (page 6.0.1)

Tapware and waste not included

Related Products

• Presqu’ile toilets (page 2.0.1)

• Presqu’ile whirlpool (page 4.0.1)

• Presqu’ile basins (page 1.0.1) • Presqu’ile bath (page 3.0.1)

Technical Details

Side View

Rear View

Bidet installation

Top View

Weight: 17kg

Installation Notes:

• Bidet fixing is done via holes located on the side of the bidet.

• Due to the bidets’ waste height the use of a low prole P-trap (not supplied) is recommended as it will make

installation easier.

• The installation of a remotely located inlet shut-o valve (not supplied) for the water supply is recommended.

• Meets bidet standard AS3494.

Jan 2010

Sizes are approximate.

All measurements shown are in millimetres.

Australia

www.au.kohler.com

New Zealand

www.kohler.co.nz

More magazines by this user
Similar magazines