BEKA CITEA - PG 1&4 - BEKA (Pty) Ltd

BEKACITEA / CONTEMPORARY STREETLIGHT
LUMINAIRE RANGE
CITEA

BEKACITEA
CONTEMPORARY STREETLIGHT
LUMINAIRE RANGE
Citea - Midi/SE
DESIGNED FOR DECORATIVE LIGHTING OF GROUP A AND B ROADS WHERE
PERFORMANCE, AESTHETIC AND LIGHT POLLUTION CONSIDERATIONS ARE
IMPORTANT FACTORS
APPLICATIONS
■ DECORATIVE GROUP A AND B
ROAD LIGHTING
■ AREA LIGHTING
■ PARKING AREAS
FEATURES
■ NO INGRESS OF DUST AND
MOISTURE INTO THE LAMP
COMPARTMENT - IP66
■ GEAR COMPARTMENT - IP54
■ ALUMINIUM SPUN COVER
■ ALUMINIUM EXTRUSION BODY
■ REMOVABLE CONTROL GEAR
■ LOW LIGHT POLLUTION
CONSTRUCTION DETAILS
The luminaire is constructed as a
single piece unit incorporating the
gear and lamp compartments.
It is designed to operate
70/100/150 and 250W high
pressure sodium and
70/150/250W metal halide lamps.
SABS MARKS
The luminaire bears the SANS 475
performance mark and the SANS
60598-2-3 safety mark.
Luminaire spigot entries:
Side entry version: Casing thread of
1”BSP.
Bottom entry: 76mm diameter *
75mm deep.
INGRESS PROTECTION
The luminaire has a degree of
protection that complies with SANS
60598-2-3.
Lamp compartment: IP66
Gear compartment: IP54
LAMP COMPARTMENT
• The lamp compartment is
integrated into the luminaire
housing and consists of a
baseplate/diffuser and reflector
assembly.
• The reflector assembly is the
patented SEALSAFE® system,
which incorporates the
lampholder assembly and
associated gasket system.
• Lamp replacement is achieved
from the bottom of the luminaire
by loosening the 2 stainless steel
allen head screws.
• The baseplate/reflector assembly
can then be opened and is held
in place by a stainless steel hinge
assembly.
• The diffuser is made from heat
resistant flat glass sealed to the
baseplate/reflector assembly with
a special sealant.
• Reflectors are manufactured from
chemically brightened 99,8%
pure single piece aluminium.
• The lamp holder complies with
VC 8011, is rated 240˚C/5kV
and prevents possible loosening
of the lamp caused by vibrations.
CONTROL GEAR
COMPARTMENT
• The control gear is housed in
the luminaire body which is
manufactured from an aluminium
extrusion and an aluminium spun
top cover.
• The IP54 rating ensures that all
gear components are protected
against dust and moisture ingress,
thus preventing corrosion and
premature failure.
• The control gear is mounted on
a removable gear tray and is
suitable for operation with the
specified rating of lamp on a
230V +3%/-10% 50Hz single
phase system.
• All control gear components are
removable. Ignitors, where
applicable, are of the superimposed
pulse type. The luminaire is
power factor corrected to 0.90.

VERSIONS/DIMENSIONS IN MM
CITEA - MINI
200
175
175
ø500
ø555
Windage area: 0.073m 2
CITEA - MIDI
200
ø600
ø655
Windage area: 0.0985m 2
Easy access for installation and maintenance
140
ø76ID
ø 600
ø 655
140
ø76ID
ø 500
ø 550
BOTTOM ENTRY VERSION - CITEA MIDI
PHOTOMETRIC DATA
BOTTOM ENTRY VERSION - CITEA MINI
INTENSITY DISTRIBUTION
CITEA 150W HPS/T
cd
klm
CITEA 150W HCI/T
cd
klm
CITEA
80
115
160
230
240
320
400
480
30˚
345
460
575
30˚
ELECTRONIC PHOTOMETRIC
DATA AND UTILISATION TABLES
ARE AVAILABLE ON REQUEST
FROM technic@beka.co.za
HORIZONTAL ILLUMINANCE
BEKA
ISOLUX
H(m)
4.0 5.0 6.0 7.0
E (lx)
BEKA CITEA 150 HPS/T E (lx) x 1.0
BEKA
ISOLUX
H(m)
4.0 5.0 6.0 7.0
E (lx)
BEKA CITEA 250 HCI/T E (lx) x 1.0
0
1H
10 6.4 4.4 3.3
5 3.2 2.2 1.6
2H 10 6.4 4.4 3.3
3 1.9 1.3 0.9
5 3.2 2.2 1.6
2 1.3 0.9 0.6
3 1.9 1.3 0.9
1 0.6 0.4 0.3
0.5 0.3 0.2 0.1
3H 2 1.3 0.9 0.6
1 0.6 0.4 0.3
4H
0.5 0.3 0.2 0.1
0 1H 2H 3H 4H 5H
0
0
1H
2H
3H
4H
1H 2H 3H 4H 5H 6H

BEKACITEA
CONTEMPORARY STREETLIGHT
LUMINAIRE RANGE
ORDERING DATA
DESCRIPTION LAMP LAMP HOLDER LUMEN MASS (KG)
CITEA MINI 80W MV HQL 80W E 27 3800 9.2
CITEA MINI 125W MV HQL 125W E 27 6300 9.6
CITEA MINI 70W HPS/T HST 70W E 27 6500 9.4
CITEA MINI 100W HPS/T HST 100W SUPER 4Y E 40 10000 9.7
CITEA MINI 150W HPS/T HST 150W SUPER 4Y E 40 17200 10.5
CITEA MINI 70W MH/E HQI-E 70W/WDL clear E 27 5200 9.4
CITEA MINI 150W MH/E HQI-E 150W/WDL clear E 27 12000 10.5
CITEA MINI 70W MH/T HCI-T 70W/WDL G 12 6700 9.4
CITEA MINI 150W MH/T HCI-T 150W/WDL G 12 14500 10.5
CITEA MIDI 150W HPS/T HST-T 150W SUPER 4Y E 40 17200 12.8
CITEA MIDI 250W HPS/T HST-T 250W E 40 33000 14.0
CITEA MIDI 250W MH/T HQI-T 250W/D E 40 20000 14.0
* Standard colours: Black
Any other version available on request.
STYLE
CARDIFF
DENHAM
BABBACOMBE
BRUNEL
CITEA
PAISLEY
LINCOLN BRACKET
SWANSEA-SINGLE
SWANSEA-DOUBLE
TYPICAL MOUNTING HEIGHT: 4–12M
BEKA supplies the poles, matching the brackets.
Refer to http://www.beka.co.za/Products/citea.htm
OPTIONS & ACCESSORIES
SUFFIX
DESCRIPTION
/ SE SIDE ENTRY
/ BE BOTTOM ENTRY
Brackets and poles for various configurations
Brackets and poles to customer’s own design
MANUFACTURED BY
BEKA (PTY) LTD - SOUTH AFRICA
MANUFACTURERS OF LUMINAIRES AND GLASS FIBRE POLES
08/06
BEKA (PTY) LTD, 13 West View Road • P.O. Box 120, Olifantsfontein 1665, South Africa
Tel: +27 (0)11 238-0000 • Fax: +27 (0)11 238-0180
e-mail: info@beka.co.za • website: www.beka.co.za