(NCT) Manual 2010 - Road Safety Authority
(NCT) Manual 2010 - Road Safety Authority
(NCT) Manual 2010 - Road Safety Authority
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4<br />
NATIONAL CAR TEST (<strong>NCT</strong>) MANUAL <strong>2010</strong><br />
SERVICE BRAKE PEDAL<br />
Method of Testing<br />
SEE NOTE (1) BELOW<br />
1. Check the anti-slip provisions on the pedal pad.<br />
2. Examine the condition of the pedal.<br />
3. Check the fixing of the pedal pad to the pedal and the fixing of the pedal to the operating lever.<br />
4. Move the pedal from side to side and examine the condition of the pedal pivot bearing/bush.<br />
5. Depress the pedal to check for fouling on parts of the vehicle.<br />
NOTES<br />
1. Before carrying out this inspection, chock the road wheels.<br />
2. Brake pedals should not be rejected for not having a pedal rubber if they were not designed to have one.<br />
ITEM<br />
Service Brake Pedal Anti-Slip Provision<br />
Service Brake Pedal Mounting<br />
Service Brake Pedal Travel<br />
REASONS FOR FAILURE<br />
1 Missing, loose or worn to the extent that it is no longer effective.<br />
2 Insecure, badly corroded or worn to the extent that<br />
the pedal can be moved from side to side.<br />
3 Excessive wear in brake pedal mounting bush.<br />
4 Pedal travel is obstructed.<br />
16
Change language