TeST equipmenT cOnTenTS - Minitran

test equipment contents
Entry Level Continuity
Testers
RJ45 Tester 252
RJ45, BNC & USB Tester 252
Professional Testers
LANcaster Pro Testers 252
NETcat Micro 253
NETcat Pro 2 253
Psiber Copper Testers 254
Cable Certification & Network
Management
JDSU Validator Speed Certifier 255
WireXpert Certification Cable Tester 256
Psiber Data Network Analysers 257
Tone/Trace & Telephone Test Kits
Professional Tone & Trace 258
For Data & Telephony Installers 258
Tone Probes 258
Digalert Telephone Test Kits 259
Telephone Test Sets 260
Fibre Testing
Optical Power Meters 261
Optical Light Sources 261
Visual Inspection Systems 262
OTDR 263
Head Office: T: 01279 757775 • F: 01279 653535 251 Scotland: T: 01383 435985 • F: 01383 435993

copper cable testers
Minitran offer a wide range of copper cable testers, ranging from simple to use continuity testers to
certification tools. For the network cabling installer a pair tester is the entry level tester, as pair tests are
specified in the TIA568B wiring specifications.
Entry Level RJ45 Tester
TM
Entry level LED continuity tester suitable for CAT5e/
CAT6 UTP and STP cables. Built in removable remote
unit. Tests cross wiring, miss wiring, shorts & opens.
RJ45 Tester
Spare Battery
MT1045J
2CR13
Entry Level RJ45, BNC & USB Tester
TM
This 3-in-1 continuity tester can be used on twisted
pair, co-ax and USB cables. LED indication and one
button testing.
RJ45/BNC/USB Tester
MT1045USB
LANcaster Pro-Range
The NEW LANcaster Pro-range features two models.
Both are cost effective pair testers which tests and
certifies structured cabling continuity to TIA568A/B,
USOC & ISDN standards. The PRO-ST version includes
the ability to save 1K test results for later uploading
to a PC with the supplied software. Features:
• Full wiremap test
• Measure pair length 150Mtrs
• Measures distance to fault
• Displays which end the fault is at
• Stores 1K test results (PRO-ST Version only)
• Upload Report software (PRO-ST version only)
• Date & Time (PRO-ST version only)
• Backlit Screen
• Active service detect
• Adjustable NVP
• Built in tone generator
• Intelligent remote
LANcaster PRO-ST 4403300
LANcaster PRO 4403500
Cat5e/6 patch leads: pages 17-18
sales@minitran.co.uk
252
www.minitran.co.uk

Copper cable Testers
The Greenlee NETcat range are EIA/TIA-568A&B wiremap testers.
As part of the Greenlee Voice Data Video (VDV) range, these testers are designed for the
network professional. 1 Year RTB warranty.
NETcat Micro
The NETcat Micro is a full Pair tester and as such
will test Category cable to the correct TIA wiremap
configuration including split pairs. The NETcat can
test UTP/STP Category cables and also co-ax cables.
Features :
• High contrast LCD with backlight
• Detects opens, reversed polarity, crossed & split
pairs.
• Built in tone generator -3 Tones
• Tests UTP/STP and Co-Ax cables
• 9V battery (supplied)
• Replaceable F-Type coupler
• Includes test leads
Netcat Micro
NC-100
NETcat Pro 2
The Netcat Pro 2 features a large backlighted
touchscreen for ease of use, and is a fully featured
pair tester which will detect all physical wiremap
faults as per EIA/TIA-568A&B.
Additional functions include TDR for cable length
measurements and distance to fault measurements.
Features:
• Large High contrast backlit touchscreen
• Tests UTP/STP and Co-Ax cables
• TDR pair length upto 2000ft
• NVP lookup list
• Tone Generator function - four tones network
detection 10/100/1000BaseT
• PoE detection for IEEE802.3af devices
• Memo pad feature.
• 9V Battery included
• Test Leads
Netcat Pro 2
Accessories
Optional accessory kit allows the testing
of 8 consecutive links from one location.
Kit includes 7 additional remotes (2-8)
and a carry case.
Tone probe for use with the NETcat
series tone generators
NC-500
NC-510
200EP-G
Coax products:
pages 269-270
Head Office: T: 01279 757775 • F: 01279 653535 253 Scotland: T: 01383 435985 • F: 01383 435993

Psiber copper testers
PSIBER manufacture a variety of innovative hand held network test tools for the IT installer/
manager.
The Cable Tool is designed for testing all types of copper cables. Measures cable length and
distance to fault. Also tests voltages on mains cables to 250V.
The LANmaster 26 can be used to detect all 10/100/1000 ethernet links in half and full
duplex. Includes a PoE test.
The LANmaster 30 identifies Analogue telephony, ISDN, PBX 10/100Mbps ethernet and Token Ring.
LANmaster 35 is ideal for VoIP, WLAN and IP camera installers. Tests include PoE load tests, verifies
10/100/1000BASE connectivity and can be used to measure cable lengths.
The Pinger Plus is a handy tool to test the connection and availability of stations, servers and other network
resources. Additional features include PING routines, MAC address display and switch link blinking.
Cable
tool
LanMaster
26
LanMaster
30 LanMaster
35
Pinger
Plus
cable LanMaster LanMaster LanMaster Pinger
Tool 26 30 35 Plus+
Part Number PS-CT50 PS-LM26 PS-LM30 PS-LM35 PS-PNG65
Full TDR Capability for:
Length Measurement • •
Fault detection • •
Loop resistance
•
Voltage measurement • • •
PoE detection • •
Under load
•
Detect IEEE802.3af/CISCO
•
Polarity
Tone Generator • •
Datalink and Network Layer Tests
10BASE-T link Test • • • •
100BASE-T Link Test • • • •
1000BASE-T Link Test • • •
Duplex mode detection • • •
Service Detection
•
Analoge Telephony (POTS)
•
ISDN
•
Ethernet
•
Token Ring
•
Hub Activation /Port ident • • •
Configurable Blink Rate
•
Transport and Session layer Tests
Ping individual IP addresses
•
Ping Address IP Range
•
Measure round trip times
•
DHCP Test
•
MAC address display
•
sales@minitran.co.uk
254
www.minitran.co.uk

ethernet network management testers
Validator Speed Certifier
The JDSU Validator models are the ideal test tools for IT managers and IT support teams. The Validator
Pro utlilizes BER testing to actually test a link with actual data packets to validate data transmission on
10/100Mbps and 1000Mbps networks. This gives a real world performance verification on a category cabling
link. The latest Validators include a built in optical power meter for complete copper and fibre testing in one
unit.
Two models are available, the Validator Pro and the Validator PRO NT.
The PRO NT version adds a comprehensive set of network management tools, port discovery features using
Cisco Discovery Protocol (CDP) or Link Layer Discovery Protocol (LLDP). PING routines. Also offers Discovery
and display of 802.11b/g/n WLAN systems.
Key Features;
• Built in Optical Power Meter for single and
multimode fibre.
• Wavelengths 850/1300/1310/1449 & 1550nm
• Conducts BER testing to speed certify Ethernet
data transmission to 10/100/1000BASE-T
• Measures SNR & SKEW
• Tests for Shorts, split pairs miswires & reversals and
distance to opens and shorts.
• Supports all copper network, telco and co-ax
cables.
• Interfaces RJ45, RJ11, F-Type & 2.5mm OPM
• Includes PLAN-UM network layout software.
NT Version also features
• Measures PoE voltage and current
• Port discovery to detect ethernet speed
• Ping network devices
• Discover and display 802.11b/g/n wireless devices
KIT Includes ;
Each Validator is supplied with a comprehensive
accessory kit.
Includes RJ45 sacrificial adaptors
RJ45-Croc clip lead
RJ45 Remote identifiers
Lithium-ion batteries & charger
Car charger
USB lead
USB Drive include Plan-UM software, firmware,
user guide and quick start guide.
Printed quick start guide
100 x speed certified lables
Soft carry case
Validator PRO
Validator PRO NT
NT-1150
NT-1155
1 year warranty
Head Office: T: 01279 757775 • F: 01279 653535 255 Scotland: T: 01383 435985 • F: 01383 435993

Certification Cable Tester
Psiber WireXpert
The NEW Psiber WireXpert is the latest generation in cable certification technology.
It can power through Cat6a cable testing in less than 9 seconds, and its 1.6GHz frequency range ensures
future 40/100Gbps certification is easily within reach.
Dual control handsets and colour touch screen makes this an intuitive machine to use.
available
for hire
Features:
• Cat5e, Cat6 & Cat6a sub 9 second test
• Cat7 sub 12 seconds test time
• Cat7a sub 14 seconds test time
• 1.6GHz Testing bandwidth
• Tests Cat5e/6/6a/7/7a
• Optional fibre testing
• Dual control Handsets
• Intuitive touch-screen interface
• 2000 tests internal storage
• Exceeds Level IV requirements
• Patch Cord Testing
• Talkset included
• Li-Ion Batteries
• Supplied with CAT6a Link and channel adaptors.
• Soft carry case
• ReportXpert Software
WireXpert Kit (For
Cat5e, Cat6 & Cat6a)
WX4700-FA
Fibre Certification Modules:
WireXpert fibre test modules offer full Tier 1
certification on fibre links. With a fast sub 9 second
bi-directional certification test, links can be certified
for attenuation loss, length, against the selected
standard.
Available in multimode & singlemode versions.
WX Multimode Modules
WX Singlemode Modules
WX-AD-SMM2
WX-AD-SM2
DCH Dual Control Handsets
Multimode module
Innovative Link
Adaptor
System
Additional Copper Modules:
Replacement Category 6a link & Channel Modules
CAT6a Perm Link Leads
WX -ALCORD2
Module & CAT6a link leads WX-AD6ALKIT2
CAT6a Channel Adaptors
WX-AD6ACH2
Category 7 and 7a Link & Channel Modules
GG45 P/Link Adaptors
WX-ADGGARJL2
GG45 Channel Adaptors WX-ADGGARJCH2
TERA P/Link adaptors
WX-ADTERAL2
TERA Channel Adaptors
WX-ADTERACH2
Cat6a link adaptor
Cat6a channel
adaptor
sales@minitran.co.uk
256
www.minitran.co.uk

Network Analysers
The Psiber LANxpert range of network
analysers allow network professionals to
quickly maintain and optimize network
services. Two models are available, the LE80
for 10/100/1000Mbps copper networks and the
LE85 Gigabit copper and Gigabit fibre version.
Copper Ethernet Network Analyser
The LE80 offers 10/100/1000Mbps
Copper Ethernet network analysis
• Colour touch screen
• Inline packet Inspection
• Identify Traffic Protocols with amount and
percentage breakdowns
• Captures upto 10K packets for analysis
• Measures PoE voltage and Power
• VoIP traffic, call statistics & Quality
• IPv6 detection
• RFC2544 Stress testing
• Identify standard link, frame & traffic problems
• Test cables for wiremap and length
LANXpert Gigabit Analyser
LE80
Gigabit Fibre & Copper Analysers
LE85 Version is designed for analysis of
Gigabit fibre links. Offering a similar core feature
set to the LE80 analyser, except this unit is optmised
for gigabit fibre links.
To test copper links the copper SFP is used.
Two versions of the LE85 are available, the LE85M
for multimode and copper analysis and the LE85S
for singlemode and copper analysis. Additional SFP
are available.
LE85 Multimode/Copper
LE85 Singlemode/Copper
Additional SFP Modules
SFP Gigabit Copper
SFP Gigabit SX MM
SFP Gigabit LX SM
LE85M
LE85S
GB-D01AN
MM-F12CY
SM-F22EY
LANXperts are supplied with the relevant modules,
AC adaptor, case and instructions.
LE80
√
-
√
√
-
√
√
√
√
√
√
LE85
√
√
√
√
√
-
-
√
√
√
√
Model
10/100/1000BaseT
Single/Multmode Fibre
Network Analysis
RFC2544 Test
Loopback Test
Cable Test
PoE test
Inline testing
VoIP testing
Packet capture
Traffic Generator
Head Office: T: 01279 757775 • F: 01279 653535 257 Scotland: T: 01383 435985 • F: 01383 435993

tone & trace Kits
Professional Tone & Trace KIT
This is the industry standard tone and trace kit. The
701K kit offers superior tracing for low voltage
applications such as telephone, data and security
and alarm wiring. Tone probe includes built in LED
light, headset socket and interchangeable tips. RJ11
plug and croc clips. Includes RJ11/45 coupler.
Professional Tone & trace
701K-GU
Data installers
For Data installer who need to trace using RJ45
connectors. The AT8K generator features a RJ45 plug
and a RJ45 socket for the direct connection to panels
and patch cords. The Generator also has croc clips to
select the tone pair using the breakout terminals.
AT8K Adaptoner M0563-00
Data installers
Similar to the AT8K kit above, but the generator can
also be used blink switches/hubs on live networks.
RJ45 & croc clips.
LANToner Kit M0637-00
LANToner Generator M0640-00
Telephony Data installers
The Tempo PTS kits are supplied with a Tone probe
and Tone generator with croc clips and interface
plug.
PTS RJ11 Plug Kit
PTS BT Plug Kit
MT0113-00
MT0114-00
Tone Probe
The NEW 200EP-G tone probe features
High detection sensitivity and a powerful speaker
makes this the ideal tone probe for cable tracing.
Also features a LED light to illuminate the probe tip.
Can be used with most tone generators.
Tone Probe
EP200-G
Voice products: pages 151-158
sales@minitran.co.uk
258
www.minitran.co.uk

telephone test Kits
Digalert 350 & 361
The Digalert test system is probably the most
advance telephone test kits available.
All Digalert are IP65 rated against water, dust,
temperature and impact.
Features:
• Loudspeaker listening
• Volume boost
• LED Mode Indication
• DigAlert Digital Lockout & Alarm
• DigAlert High Voltage Lockout & Alarm
• Proof tested to IP67
• Microphone mute
• Battery low audible tone
• Tone/Pulse, Redial (10 x 24 memories)
• Selectable ringer tones
• Flash, Pause
• Super Hi Impedance Polarity
• Super Hi Impedance Monitor
• 8 High monitor level, warble ringer
• Fitted with shrouded 4mm plugs
Digalert 361
The 361 adds to the 350 feature set and includes a
two-way Speakerphone and offering a full duplex
hands-free telephone testing.
3 Year Warranty on Digalerts.
Digalert 350 M0402-01
Digalert 361 M0400-01
ADAPTAJACK
The new ADAPTAJACK is designed with safety in
mind. Designed to accept the fixed shrouded leads
found on test equipment and conform to EN61010
safety standards for use in measurement Category 1.
Features:
EN61010 Compliant.
Compatible with shrouded 4mm plugs.
Interchangeable line cord.
Design allows for custom lead configurations.
Module features 4mm sockets to a RJ11 socket.
Interface leads have a RJ11 plug
ADAPTAJACK module including interface lead
Adaptajack BT Plug 52056612
Adaptajack Krone Plug 52056614
Apdaptajack RJ11 52056599
Voice products: pages 151-158
Head Office: T: 01279 757775 • F: 01279 653535 259 Scotland: T: 01383 435985 • F: 01383 435993

telephone test sets
Compact DSP
The Compact DSP Telephone Test Set is an affordable
telephone tester which will help you deal with the
increasing complexity of telecom installation and
maintenance.
• Line polarity
• Tone/pulse dialing
• Last number redial
• Mic Mute
• Data safe monitor mode
• Replaceable cord set
• Croc clips as standard
Compact DSP M0452-00
Tele-Mate
The Tele-Mate Pro builds on the Compact DSP
feature set and adds useful features including an
LCD display, loudspeaker monitor, caller ID, speed
dial, callback, intercom and line voltage / current /
frequency meter.
1 Year Warranty.
Tele-Mate Pro 50602993
Compact DSP and TeleMate Accessories
Hands free headset M0459-20
BT 432a Plug
MO459-01
RJ11 Plug
MO459-02
Croc Clips M0459-00
Telephone test set Interface cables modules use 4mm
banana sockets.
3B with BT Plug M0009-01
2A 2 Pole Krone Plug M0009-02
RJ11 Plug M0009-03
Breakout design
6 wire- BT 631A plug M0008/00B
6 Wire - RJ11 Plug M0008/09B
8 Wire - RJ45 Plug M0110/00B
Voice products: pages 151-158
sales@minitran.co.uk
260
www.minitran.co.uk

Fibre Loss Kits
The NEW Greenlee Mini Fibre Test (GMFT) range of fibre test tools
allows you to configure a test kit to suit your exact needs.
2 Year warranty on Greenlee Micro fibre tools.
Optical Power Meters
The GRP series OPM are available in two versions.
Both units are zero reference models but the GRP460
series offer the ability to save and upload 1K of test
results per wavelength.
OPMs
Zero ref setting
Zero ref & Save
Adaptor caps
GRP Series 1.25mm Adaptor
GRP Series SC Adaptor
GRP Series FC Adaptor
GRP Series LC Adaptor
GRP450-02
GRP460-02
GAC021
GAC026
GAC028
GAC029
Optical Light Sources & Visual Fault Finder
The GRP series OLS are available in two versions.
The GDLS350 is for multimode applications and
features 850 & 1300nm outputs, the GDLS355 is for
singlemode applications and features both 1310 and
1550nm outputs.
Additional features include a 2Khz tone generation
which can be picked up by the GRP series OPMs.
Optical Light sources
MM 850nm/1300nm
GDLS350
SM 1310 /1550nm
GDLS355
Adaptor Caps
GDLS series FC Adaptor
GAC022
Visual Fault Finder (VFL)
The GVF610 is a high output 635nm visible
laser source for fault location in splices,
patchcords & connectors. 2.5mm universal
adaptor for ST/SC/FC connectors
GVF610
Power Meter Selector
Do you need to save and print results?
YES: use the GRP460-02; NO: use the GRP450-02
The GRP meters are fitted with a 2.5mm universal interface. Use the GAC026 SC interface to
match the GDLS light source interface
Light Source Selector
Are you testing:
Multimode: Use GDLS350 Single mode: Use GDLS355
Both: Use both the GDLS 350 & GDLS355
Visual Fault Locator: If a visual fault locator is required add a GVF610
Deluxe carry case: Add a GDFC if a multi-instrument case is required. Each unit is supplied with
a single case, the deluxe case allows all the instruments to be protected in a single case.
Head Office: T: 01279 757775 • F: 01279 653535 261 Scotland: T: 01383 435985 • F: 01383 435993

visual inspection system
Visual Inspection System
The GVIS series of inspection scopes offer an unique focusing system and a wide field of view for superb
image quality. Inspection probe features blue LED endface illumination. 8-10 hours of operation from the
advanced Li Ion battery with a 3 hour charge. Each kit is supplied with the monitor and probe, SC bulkhead
adaptor and a 2.5mm connector adaptor.
Each GVIS system is supplied with a cleaning kit. Two versions of the probe and monitor are available, the
-USB version features the ability of realtime image uploading to a PC via the onboard USB port for image
achieving.
300 Monitor & probe Kit GVIS300MP
300 Monitor inc USB capture and Probe Kit GVIS300MP-USB
For those who do not require the monitor, the GVCM410 Video Capture Module allows the GVIS 300 Probe
to be connected directly to a PC via a USB port without using the GVIS300 monitor. The end-face image can
then be displayed directly on the computer using the Greenlee inspection software.
USB Video Capture Module
GVCM410
The GVIS300 probe can be used as a replacement probe or in conjunction with the GVCM410 video capture
module to allow endface inspection via a PC.
GVIS 300 Probe 2.5mm Universal tip
GVIS300P
Accessories
SC bulkhead Adaptor
GAC040
SC/APC Bulkhead Adaptor
GAC041
FC Bulkhead Adaptor
GAC042
LC Bulkhead Adaptor
GAC044
ST Bulkhead Adaptor
GAC046
1.25mm Universal Connector Adaptor
GAC048
2.5mm Universal Connector Adaptor
GAC049
GMFT Deluxe Carry Case
GMFTDC
See our building to building
laser links (FSO): pages 202-203 Fibre products: pages 122-150
sales@minitran.co.uk
262
www.minitran.co.uk

OTDR
Greenlee OTDR
Greenlee 920 series OTDRs are designed to be robust and cost effective test instruments.
Simple and easy to use, one button Autotest feature chooses the optimal test settings for the
test link and displays the results on a colour screen.
Result traces can be saved for later uploading via the USB port.
Dual wavelength versions for both the single and multimode units.
Single mode version features a built-in VFL port.
Features:
• Economical
• Protective Rubber boot
• Compact handheld design
• Easy to use
• Fast automated testing
• Up to 35db dynamic range
• Large backlight LCD display
• Measure length and defects of coiled fibre
• Fiber analysis software for data management and
report generation
• RS-232/USB interface
• NiMH batteries for 8 hours continuous
OTDR Trace
View and measure test results using either event
view mode or manual measurement mode.
Hi Res Event View
Easy view and measure in high resolution mode.
Active cursor snaps to the next event in the fibre
analysis table.
Singlemode version features a 650nm 3mw
Visual Fault Locator (VFL) port .
Both kits supplied with SC adaptors, batteries,
charger, trace analysis software and a carry case.
OTDR Multimode kit
850/1300nm
920XC-20M-UPC-SC
OTDR Singlemode kit
1310/1550nm
920XC-20C-UPC-SC
FC Adaptor for 920XC 52026957
ST Adaptor for 920XC 52026958
SC Adaptor for 920XC 52026959
Head Office: T: 01279 757775 • F: 01279 653535 263 Scotland: T: 01383 435985 • F: 01383 435993

Notes
For all the latest product information see www.minitran.co.uk.
sales@minitran.co.uk
264
www.minitran.co.uk