instruction book - Janome
instruction book - Janome
instruction book - Janome
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1 2 3<br />
05<br />
0<br />
Auto<br />
9<br />
Overcasting<br />
• Zigzag stitch<br />
Machine setting<br />
1 Pattern #05<br />
2 Foot<br />
C: Overcasting foot<br />
3 Thread tension Auto<br />
CAUTION:<br />
Do not set the stitch width less than 5 when<br />
using the overcasting foot to prevent the<br />
needle from hitting the wires on the foot.<br />
Place the raw edge of the fabric next to the guide of the<br />
foot and start sewing.<br />
1<br />
Guide<br />
1<br />
1 2 3<br />
10<br />
0<br />
Auto<br />
9<br />
• Multiple zigzag stitch (Tricot stitch)<br />
Machine setting<br />
1 Pattern #10<br />
2 Foot<br />
A: Zigzag foot<br />
3 Thread tension Auto<br />
This stitch is used to finish a raw edge of synthetics and<br />
other stretch fabrics that tend to pucker. Sew along the<br />
fabric edge leaving an enough seam allowance.<br />
After sewing, trim off the seam allowance closer to the<br />
stitches as shown.<br />
1 2 3<br />
13<br />
0<br />
Auto<br />
9<br />
• Knit stitch<br />
Machine setting<br />
1 Pattern #13<br />
2 Foot<br />
A: Zigzag foot<br />
3 Thread tension Auto<br />
This stitch is used to finish a raw edge of knit and other<br />
stretch fabrics. Sew along the fabric edge leaving an<br />
enough seam allowance.<br />
After sewing, trim off the seam allowance closer to the<br />
stitches as shown.<br />
22