Flexible lid grommet Operating / Installation manual ... - RAJA-Lovejoy

rl.hydraulics.de

Flexible lid grommet Operating / Installation manual ... - RAJA-Lovejoy

Flexible lid grommet

Operating / Installation manual

BMA0006


Raja-Lovejoy GmbH Flexible lid grommet Number: BMA0006

Friedrichstr. 6 operating / Page: 1 of 4

D-58791 Werdohl installation manual Version: 1ENG

Table of contents:

1.0 General information: ........................................................................ 2

1.1 Safety and information symbols: ................................................................ 2

1.2 General hazard warnings:............................................................................ 2

2.0 Intended use: .................................................................................... 3

3.0 Dimensions: ...................................................................................... 3

Figure 1: Diagram of the flexible lid grommet ............................................... 3

Table 1: Metric dimensions ............................................................................ 4

Table 2: Inch dimensions ................................................................................ 4

4.0 Material properties ........................................................................... 4

4.1 Temperature limits ...................................................................................... 4

4.1 Material properties ..................................................................................... 4

5.0 Installation ........................................................................................ 4

Copyright reserved Signed: 01.10.2010 MBOZ Replacement for:

as per ISO 16016 Checked: 01.04.2011 XXXX Replaced by:


Raja-Lovejoy GmbH Flexible lid grommet Number: BMA0006

Friedrichstr. 6 operating / Page: 2 of 4

D-58791 Werdohl installation manual Version: 1ENG

The flexible lid grommet is used to secure standardised hydraulic pipes in a way that is both

oil-tight and dustproof. Due to the material used, the structure-borne sound is cut off between

the pressure and suction lines and the tank.

1.0 General information:

Carefully readthrough this installation manual before installing the flexible lid

grommet. Pay particular attention to the safety instructions!

The installation manual is part of your product. Store it carefully and inthe vicinity of the

flexible lid grommet.

The copyright for this installation manual shall remain with Raja-Lovejoy GmbH.

1.1 Safety and information symbols:

Danger

Risk of injury to personnel

Caution

Damage could occur to the machine

Note Note regarding important information

1.2 General hazard warnings:

During installation and removal of the flexible lid grommet, make sure that the

entire drive train is secured to prevent accidental activation, and that the

system is depressurised. Failure to handle rotating parts in the proper manner

can cause serious injury. For this reason, the following safety instructions

should be read and followed without exception.

• All work on the flexible lid grommet should be performed from the perspective of

->“Safety First”

• Switch off the drive unit before carrying out work on the flexible lid grommet.

• Secure the drive unit to prevent unintentional activation, e.g. by attaching information

signs to the switch-on points or removing the fuse at the power supply.

• Do not reach into the working area of the machine while it is still in operation.

• Protect the rotating parts to prevent accidental touching. Attach the relevant protective

devices and covers.

• Make sure that the system is depressurised and that the temperature of the oil could not

cause burns.

Copyright reserved Signed: 01.10.2010 MBOZ Replacement for:

as per ISO 16016 Checked: 01.04.2011 XXXX Replaced by:


Raja-Lovejoy GmbH Flexible lid grommet Number: BMA0006

Friedrichstr. 6 operating / Page: 3 of 4

D-58791 Werdohl installation manual Version: 1ENG

2.0 Intended use:

You may only install and maintain the flexible lid grommet if you:

• have carefully read and understood the installation manual

• are authorised and trained to do so

The flexible lid grommet may only be used in accordance with the technical specifications.

Unauthorised structural changes to the flexible lid grommet are prohibited. We will not

accept any liability for damage occurring as a result of this. In the interest further

development, we reserve the right to make technical changes. The flexible lid grommet

described here corresponds with the latest technical standards at the time of publication of

this installation manual. The flexible lid grommet is usually delivered ready for installation.

3.0 Dimensions:

Figure 1: Diagram of the flexible lid grommet

Copyright reserved Signed: 01.10.2010 MBOZ Replacement for:

as per ISO 16016 Checked: 01.04.2011 XXXX Replaced by:


Raja-Lovejoy GmbH Flexible lid grommet Number: BMA0006

Friedrichstr. 6 operating / Page: 4 of 4

D-58791 Werdohl installation manual Version: 1ENG

Table 1: Metric dimensions

Table 2: Inch dimensions

4.0 Material properties

4.1 Temperature limits

• Standard temperature: 95°C

• Short-term temperature peaks: max. 110°C

4.1 Material properties

• Good resistance to mineral oil, petrol, propane, mineral-oil-based grease, diesel, light

heating oil, plant and animal fats.

• Limited resistance to fuel with a high aromatic content (super-grade petrol)

• Low resistance to aromatic hydrocarbons (e.g. benzene), chlorinated hydrocarbons (e.g.

trichloroethylene), ester and polar solvents.

5.0 Installation

Installation is performed by simply inserting the lid grommet into the opening in the tank lid.

Then insert the greased pipe into the lid grommet.

Copyright reserved Signed: 01.10.2010 MBOZ Replacement for:

as per ISO 16016 Checked: 01.04.2011 XXXX Replaced by:

More magazines by this user
Similar magazines