Chapter 04 - Zodiac

Headlights
04
Lighting & Indicators
BLACK 'N' BRONZE HEADLIGHT
Bottom mount headlight with black housing, bronze bezel and 5 3/4"
TÜV/EU approved H4 12V 60/55 W halogen lamp and parking light.
The unit has a diamond cut reflector. Housing is 6 1/4" (15.9 cm) in
diameter and is 5.9" (15 cm) long.
160829 Black-'n-bronze headlight
HEADWINDS HOODED HEADLIGHTS HOUSING
These beautiful Custom headlight housings are made of thick aluminum
sheet to ensure they remain rigid after the grooves are milled.The lamp
is slightly recessed for a hooded appearance and is held in position
using a threaded ring, so there are no exposed rivets or bolts.Also the
Billet aluminum mounting bracket is attached to the housing, so a very
clean look is achieved. The standard bracket position fits 1980 thru
1986 FXWG and 1984 to present FXST models with the 3/4" wide
mounting block (not included).These Headwind headlights are available
in your choice of highly polished or Chrome-plated finish. Light units
are not included and must be ordered separately.
5 3/4" headlight housing
238131 Polished
238132 Chrome
BULLET STYLE HEADLIGHTS
Bottom mount headlight with a design inspired by the early style
spotlights and Springer headlamps. Has a 5 3/4" TÜV/EU approved
headlight unit with diamond cut reflector and H4 12V 60/55W halogen
lamp and parking light. Bezel is 6.1" (15.5 cm) in diameter and
headlight is 4.43" (11.3 cm) long.
160831 Black housing with bronze bezel
165402 Black housing with chrome bezel
165404 All black
165400 All chrome
HEADWINDS "VIKING" HOODED 5 3/4" HEADLIGHT
HOUSING
This 5 3/4" Viking headlight has the same sparkling features as the
Grooved Hooded headlight, but with a different groove pattern on the
shell.Mounting block and light unit not included but must be purchased
separately.
238133 Polished finish
238134 Chrome finish
04-008