Moldboard Plows - John Deere

975/995 REVERSIBLE PLOWS
More sizes, more features,
more efficiencies
John Deere reversible plows give you some
definite advantages, both in the field and on
your bottom line.
Our field-tested pivoting design lets you
reverse the moldboards to make right- and
left-hand-side passes to finish plowing faster.
And because 975/995 Plows have one
set of bottoms, they require less maintenance
and cost less to operate than a conventional
rollover plow. They’re frugal with horsepower
and hydraulic lift capacity.
Add the options you have with John Deere
plows – more sizes, plastic moldboards,
safety trip, and adjustable width of cut – and
you can tailor-design a new 975/995 Plow to
make all your plowing jobs go fast and easy.
BENEFITS OF PLOWING
✪ Completely turns soil over for aeration.
✪ Speeds drying of soil.
✪ Buries residue to help kill leaf diseases and
insects that reside in residue.
✪ Helps reduce soil compaction.
6
Optional time-saving safety
trip protection lets you reset the
moldboard without getting off
the tractor. The safety trip, with
field-proven durability, is ideal for
working in rocky or hard ground.
To reset the safety trip, just raise
the plow, let it reset automatically,
drop, and resume plowing. Easy.
Adjust width of cut on 975
Plows to 16 or 18 inches just
by moving these two bolts on
the bottom frame. All 995 Plows
feature an 18-inch width of cut.
This optional plastic
moldboard (above) lets
you use our long-wearing
steel shins. This
combination lets
you plow sticky
soils with
greater ease.