the 200 v,f and p - Kakkis Agrifuture Products LTD

Profitable implement combinations save time and costs
MID-MOUNTING AREA FOR PROFITABLE
IMPLEMENT COMBINATIONS
Three mounting areas, at the front, between
the axles and at the rear, make the 200 range
specialty tractors well-suited for profitable
implement combinations. Combinations not only
save operating time and machine costs, but also
increase working quality by reducing tracks and
soil compaction.
Farmers and implement manufacturers alike,
value the generously-sized mid-mounting area.
Already starting with the compact 207 V,the
position of the cab allows a 100% fit of all
implements in the large-sized mid-mounting
area, without having to make inconvenient structural
changes.
Efficient thanks to the
mid-mounting area
Three and four cylinder engines
provide a large unobstructed space
with a width of up to 45 cm, which
permits implements to be guided
optimally. Four double-acting valves
on the right and 2 valves on the left
side, along with return flow and a
cross connection, permit optimum
control of sophisticated hydraulic
combinations. This allows you
to operate time and cost-saving
implement combinations using 3
mounting areas simultaneously.
Benefit: maximum efficiency and
excellent profitability.
Perfectly adapted implement
mounting plate
The basis for the mid-mounting area
is a perfectly adapted implement
mounting plate. It is available as
factory-fitted optional equipment.
The implement plate provides an
additional mounting area between the
axles.
22