Views
3 years ago

Software Manual SCD122U

Software Manual SCD122U

SCD122U

SCD122U Software Manual 9 Click Exit to close the Installation CD dialog. 0 Connect the SCD122U to a USB port on the computer. Windows automatically detects the new hardware and installs the USB driver. A Open the Device Manager. (If using Windows 2000 and XP: Go to the Start menu, open the Control Panel, select System, open the Hardware tab, and click [Device Manager]. If using Vista: Go to the Start menu, select Settings → Control Panel, and click [Device Manager].) Confirm that the following two lines appear: SMJ Line Display Device SCD122U and USB Serial Converter. If these lines are displayed correctly, installation has completed successfully. ■ On Windows XP: ■ On Windows 32-bit Vista — —

SCD122U Software Manual 1.1.2 Installing on Windows 64-bit Vista 1 Connect the SCD122U display to a USB port on the computer. Windows automatically detects the new hardware and displays the dialog shown below. Click Locate and install driver software. 2 The User Account Control dialog appears. Click [Continue]. 3 If the following dialog appears, click Don't search online. 4 The dialog shown below appears. Insert the included CD-ROM into your computer's CD-ROM drive. Installation starts automatically. — —

Software Manual
SOFTWARE USER MANUAL
Pilot Software Manual