Views
3 years ago

IC36240 User's Manual - Asante

IC36240 User's Manual - Asante

8.4.2 Configuring

8.4.2 Configuring Traffic Shaping for an Access List To configure traffic shaping for outbound traffic on an access list, use the following commands beginning in global configuration mode: Command access-list access-list-number interface interface-type-number traffic-shape group access-list-number bit-rate Purpose Assigns traffic to an access list. Enters interface configuration mode. Configures traffic shaping for outbound traffic on an interface for the specified access list. Repeat the steps for each type of traffic you want to rate limit. 8.4.3 Monitoring the Traffic Shaping Configuration To monitor the current traffic shaping configuration and statistics, use the following commands in EXEC mode, as needed: Command Show traffic-shape [interface-name] Purpose Displays the current traffic shaping configuration. 8.4.4 Generic Traffic Shaping Example This example configures that the DNS traffic to eth13 have maximum bandwidth of 50M. Defining the access list: Switch(config)# access-list 100 permit udp any any eq 53 Assigning the traffic shape to an interface: router(config-if)# traffic-shape group 100 51200000 8.5 Configuring Rate Limit To configure the committed access rate (CAR) policies use the rate-limit command. The rate-limit command allows you to control the amount of traffic coming in on a port. Switch> enable Switch# config Switch(config)# inter eth1 Switch(config-if-eth1)# rate-limit ? input Applies this CAR traffic policy to packets received on this input interface Switch(config-if-eth1)# rate-limit input ? Average rate, in bits per second (bps) access-group (Optional) Applies this CAR traffic policy to the specified access list 72 Asante IntraCore IC36240 User’s Manual

The following examples show setting the rate of interface Ethernet 1 to 100M, setting an associated access list and limiting the rate of the access list on the interface to 200M. Switch(config)# inter eth1 Switch(config-if-eth1)# rate-limit input 100000000 Switch(config-if-eth1)# access-list 1 permit 192.203.56.1 Switch(config-if-eth1)# rate-limit input access-group 1 200000000 73 Asante IntraCore IC36240 User’s Manual

EFM User Manual - CTC Union Technologies Co.,Ltd.
User's Manual for FH316 Dual Speed hub - Asante
EAP350 User Manual - EnGenius Technologies
FMUX01A/Plus User Manual - Products
FMUX01A/Plus User Manual - Datainterfaces.com
PHB-200 User Manual - CTC Union Technologies Co.,Ltd.
EOe1-A User Manual - Products
ECB600 User Manual - EnGenius Europe
User Manual [ver 4.00] - KOUKAAM, a.s.
Rovio User manual - WowWee
Download User Manual - Y3k.com
Download User Manual - Y3k.com
User Manual - Antik Technology
Planet FNSW-2400PS User Manual - Use-IP
AirLive WN-5000R User's Manual