Views
3 years ago

IC36240 User's Manual - Asante

IC36240 User's Manual - Asante

1 2 3 4 5 To restore the

1 2 3 4 5 To restore the defaults press the Restore button. 9.6 Address Table Screen Use this screen to view IP address tables. From the main screen you can view the status of each ports, the address counts of the VID, IP and MAC addresses. You can search for specific IP and MAC addresses and sort the results either IP or MAC. The display is sorted by IP address. The switch uses the information in this table to decide whether a frame should be forwarded to a particular destination port or “flooded” to all ports other than to the received port. Each entry consists of three parts: the MAC address of the device, the port number on which it was received and the VLAN number. To access this screen, click on Addr Table in the menu bar on the left side on the screen. 86 Asante IntraCore IC36240 User’s Manual

The following example shows the Address Table screen. Click on the port number to filter the display and show the address table for a specific port. 87 Asante IntraCore IC36240 User’s Manual

EFM User Manual - CTC Union Technologies Co.,Ltd.
EAP350 User Manual - EnGenius Technologies
User's Manual for FH316 Dual Speed hub - Asante
PHB-200 User Manual - CTC Union Technologies Co.,Ltd.
ECB600 User Manual - EnGenius Europe
FMUX01A/Plus User Manual - Products
EOe1-A User Manual - Products
Download User Manual - Y3k.com
Planet FNSW-2400PS User Manual - Use-IP
NVR + IP Camera User Manual
FMUX01A/Plus User Manual - Datainterfaces.com