3 years ago

IC36240 User's Manual - Asante

IC36240 User's Manual - Asante

To access the VLAN

To access the VLAN configuration screen click on VLAN in the menu bar on the left side of the screen To sort the display enter the VLAN ID number you want the display to start with and press GO. The following example shows the output from the VLAN Group information screen. Assign a switchport to a VLAN by designating a membership mode. The membership mode determines the type of traffic the port carries and the number of VLANs allowed on that port. There are two membership modes: • Static—A static-access port can belong to one VLAN and is manually assigned to that VLAN • Trunk—By default, a trunk port is a member of all VLANs. Membership can be limited by configuring a VLAN Allowed List The following steps show creating a new VLAN 4 with the name To create a new VLAN and link it to a specific port from the main VLAN Group-Create menu follow these steps: 1. Type the new VLAN number in the VID box 2. Assign a name for the VLAN 90 Asante IntraCore IC36240 User’s Manual

3. Click Apply 2 4 Asante 3 4. Click on the VLAN ID number in the VLAN table to move to the configuration page for the new VLAN From the VLAN Group Configuration page, you can enable or disable the management access and link a VLAN to a specific port. Use the VLAN feature to partition a single IntraCore IC36240 into a VLAN each containing its own set of ports. Packets are forwarded only between ports belonging to the same VLAN. This allows you to restrict access from one segment to another to increase network security or to reduce traffic. To set up VLANs you should specify the ports belonging to the VLAN, the set the IP configuration, individual access map associated with a set of VLANs and enable tagging. Once you have configured the VLAN and copied the information into the startup-config file, the VLAN information applies to the default. Follow these steps: The scroll menu on the right side of the screen shows the available ports. 1. Click on a port number that the VLAN will be associated with from ports scroll menu. 1 2 2. Click on the Move port to this VLAN button The box on the left side of the screen confirms the VLAN was linked to the desired port. 91 Asante IntraCore IC36240 User’s Manual

EFM User Manual - CTC Union Technologies Co.,Ltd.
User's Manual for FH316 Dual Speed hub - Asante
EOe1-A User Manual - Products
Download User Manual -
EAP350 User Manual - EnGenius Technologies
FMUX01A/Plus User Manual -
AirLive WN-5000R User's Manual
FSW-2104W User Manual - CTC Union Technologies Co.,Ltd.
CB-100A series User's Manual - Kamery IP
Aastra 6730i User Manual (PDF) - VoIPon Solutions