3 years ago

IC36240 User's Manual - Asante

IC36240 User's Manual - Asante

3. Click Apply 1 2 3 To

3. Click Apply 1 2 3 To configure a specific VLAN click on the VLAN ID number access the advanced IGMP configuration screen. The following example shows the IGMP information for VLAN1. Multicast switches send IGMP host-query messages to discover which multicast groups are present on attached networks. These messages are sent to the all-systems group address of with a time-to-live (TTL) value of 1. Multicast switches continue to periodically send host-query messages to refresh their knowledge of memberships present on their networks. If, after some number of queries, the switch software discovers that no local hosts are members of a multicast group, the software stops forwarding onto the local network multicast packets from remote origins for that group and sends a prune message upstream toward the source. To enable or disable and to set the query intervals follow these steps. 1. Select enable or disable from the drop down menu 2. Enter the desired query interval (10-200) 94 Asante IntraCore IC36240 User’s Manual

3. Click Apply 1 2 3 9.9 Web CLI Screen Use the Web Command Line Interface (CLI) screen to use access the CLI from an http server. This feature provides the flexibility of the CLI with the usability of the GUI. You can set the clock, ping the system and show the running configuration. To access the Web CLI Screen click on the Web CLI button in the menu bar on the left side of the screen. 95 Asante IntraCore IC36240 User’s Manual

EFM User Manual - CTC Union Technologies Co.,Ltd.
EAP350 User Manual - EnGenius Technologies
User's Manual for FH316 Dual Speed hub - Asante
FMUX01A/Plus User Manual - Products
FMUX01A/Plus User Manual -
PHB-200 User Manual - CTC Union Technologies Co.,Ltd.
Rovio User manual - WowWee
EOe1-A User Manual - Products
ECB600 User Manual - EnGenius Europe
User Manual [ver 4.00] - KOUKAAM, a.s.
Download User Manual -