Views
3 years ago

GL900 USER'S MANUAL - Graphtec

GL900 USER'S MANUAL - Graphtec

Checks and Preparation

Checks and Preparation 2.4 Connecting the Power Cable and Turning on the Power This section describes how to connect the power cable and turn on the power. The connection method will vary depending on the type of power supply used. Connecting to an AC Power Supply Use the AC cable and AC adapter that are provided as accessories. CAUTION Be sure to use the AC adapter that is supplied as a standard accessory. (1) Plug the AC cable into the AC adapter. AC adapter AC cable (2) Connect the output side of the AC adapter to the connector on the GL900. AC adapter cable (3) Using the flat-blade screwdriver, press against the minus (-) button above the GND terminal, while connecting the grounding cable to the GL900. Connect the other end of the cable to ground. (4) Plug the AC cable into the mains power outlet. (5) Press the power switch on the GL900 to the ON side to turn on the power. CAUTION Always connect the GND terminal and refer to the safety precautions. The GL900 must be grounded even when connected to other devices and sharing a common ground level. 2-4

Checks and Preparation Connecting to a DC Power Supply Use the optional DC drive cable (B-514: option). CAUTION Use a power supply within the 8.5 to 24 VDC range. (1) Configure the tip of the DC drive cable (B-514: option, 2m) to enable it to be connected to the DC power supply. (2) Connect the DC output side to the power supply connector on the GL900. Shielded lead (- side) White (+ side) DC drive cable (B-514: option) (3) Using the flat-blade screwdriver, press against the minus (-) button above the GND terminal, while connecting the grounding cable to the GL900. Connect the other end of the cable to ground. (4) Connect the DC input side to the DC power supply. CAUTION Be sure to check the polarity of the wire tips when performing wiring. (5) Press the power switch on the GL900 to the ON side to turn on the power. CAUTION Always connect the GND terminal and refer to the safety precautions. The GL900 must be grounded even when connected to other devices and sharing a common ground level. 2-5

GL220 Quick Start Guide - Graphtec America Inc.
NVR + IP Camera User Manual
QCapture PRO 7 User Manual - QImaging
user manual - Mold-Masters
V6 User Manual 1.00.book - Studio General