Views
3 years ago

GL900 USER'S MANUAL - Graphtec

GL900 USER'S MANUAL - Graphtec

Checks and Preparation

Checks and Preparation 2.8 Connecting to a PC Use the USB, LAN Interface to connect the GL900 to a PC. Connection Using a USB Cable Use the USB cable to connect the GL900 to a PC. USB cable CHECKPOINT If the USB cable is used, the USB driver must be installed in your PC. Please refer to "Application Software Instruction Manual" for the installation procedure. There is "Application Software Instruction Manual" in an attached CD-ROM. CAUTION The USB connector is adjacent to the LAN connector. Make sure the cable is inserted into the correct connector. Use an A-B type USB cable to connect the GL900 to a PC A connector B connector 2-10

Checks and Preparation LAN Connection Use a LAN cable to connect the GL900 to a PC. LAN cable Cable Types • Use a crossing cable when connecting directly to a PC, without using a hub. LAN cable (crossing) • Use a straight cable when using a hub. LAN cable (straight) HUB LAN cable (straight) 2-11

GL220 Quick Start Guide - Graphtec America Inc.
user manual - Mold-Masters
V6 User Manual 1.00.book - Studio General