Views
3 years ago

GL900 USER'S MANUAL - Graphtec

GL900 USER'S MANUAL - Graphtec

Settings and Measurement

Settings and Measurement 2. SPAN/TRACE/POSITION Switches the display in the digital display. Used to change the settings related to waveform display during Free Running (when stopped), data capture, and data replay. Pressing this key will switch displays as shown below. MONITOR SPAN POSITION TRACE Displays digital values (default status) Allows changing of the span value (waveform amplitude) • Channel change: CHSELECT keys • Amplitude change: keys • Change range: 8 voltage levels /6 temperature levels Allows changing of the position (waveform up/down position) Allows turning ON/OFF of the waveform display • Channel change: CHSELECT keys • Channel change: CHSELECT keys • Amplitude change: keys • Amplitude change: keys • Change range: In steps of 10% of the range • Change range: ON/OFF * At OFF, data is captured all the same. * When ALL is set, setting values for CH1 is reflected on other channels. When CH1 is OFF, ALL cannot be set. 3. TIME/DIV Press the TIME/DIV key to change the time axis display range. However, when the sampling interval is External, “External” is displayed (in the red box) and this key is inoperative. This key is used to change the colors of the waveforms in the X-Y screen. For details, see page 3-49. 3-7

Settings and Measurement 4. MENU Open the settings window to capture data. For details on settings, see Section 3.4, "Setting Menus" on page 3-17. 5. QUIT The key is primarily used for the following operations. • To cancel a setting during menu configuration. • To return to the MONITOR window when the SPAN/TRACE/POSITION window is displayed. • To cancel remote status (in which keys are disabled) through interface control. • To close the menu screen. • To quit data replay. 6. Direction keys These keys are primarily used for the following operations. • To move in a menu or between setting items during menu configuration. • To move the cursor during replay. • To move the active channel in the Waveform + Digital screen or X-Y screen ( and keys). • To change the setting of SPAN/TRACE/POSITION ( and keys). • To change the quick settings ( and keys). • To change the setting of the channel to be allocated in the X-Y screen ( keys). • To change the number of channels displayed in the Digital + Calculation Display screen ( and keys). • To change the channel displayed in the box on the Digital + Calculation Display screen ( and keys). and 2-channel Display 4-channel Display 8-channel Display Full Channels + Statistical Calculation Display 3-8

GL220 Quick Start Guide - Graphtec America Inc.
LFD DISPLAY User Manual - CNET Content Solutions
In-Sight Track & Trace User Manual - HVS System
User Manual Manual - Verizon Wireless
User Manual Manual - Verizon Wireless