Views
3 years ago

Akai MPC-60 v2.0 Owners Manual.pdf - Fdiskc

Akai MPC-60 v2.0 Owners Manual.pdf - Fdiskc

166 • If an ALL file

166 • If an ALL file is selected and is pressed, the following screen will be displayed, warning you that all sequences and songs currently in memory will be erased: Press to load it. Once finished, the previous screen will be re-displayed. • If a SND file is selected and is pressed, the following screen will be displayed, asking you to select the drum to load the sound into: Select the drum to be loaded into, then press . Once loaded, the previous screen will be re-displayed. NOTE: If the sound file you are loading already exists in memory (assigned to a different drum), the MPC60 recognizes that it is already in memory and doesn't load it. Instead, it internally assigns the existing sound to the two drum pads to save memory. This is very useful, for example, if you want to play a single tomtom sound from four pads at different pitches, without wasting memory by loading the same tom-tom sound four times. • If a SET file is selected and is pressed, the following screen will be displayed, asking you if you want to load the entire file or only a single sound from it:

Section 7: Saving to / loading from Disk 167 If 1 is selected, the entire file is loaded, and the bottom line changes to "Loading files...". However, if 2 is selected, the following screen appears: Use the DATA CONTROL in the SELECT DRUM TO LOAD FROM FILE field to select the drum (within the SET file) containing the sound you wish to load. As you change this field, the sound which is assigned to that drum in the disk file will appear in the SOUND field. Then use the SELECT DRUM TO LOAD INTO field to select the drum (in the MPC60) to load the sound into. Once the fields have been set, press and the selected sound will be loaded into the selected drum. NOTE: If the SET file contains a sound loaded into more than one drum, the same sound will appear if either drum is selected. For example, "FLOOR TOM" could be loaded into both TOMS and TOM4, but the settings from the EDIT A SOUND screen (including tuning, envelope parameters, etc.) for TOM3 and TOM4 are different. In this case, selecting TOMS in the SELECT SOUND TO BE LOADED field will load the sound "FLOOR TOM #3", but with the EDIT A SOUND settings which were originally set for TOM3. After the file has been loaded, the LOAD/ERASE/RENAME screen will be re-displayed. If a parameter file is selected and is pressed, the following screen will be displayed,

DD-65/YDD-60 Owner's Manual - zzounds.com
Tandy Model 3 Disk System Owners Manual.pdf - 400 Bad Request
OWNER'S MANUAL - Roland
Roland KC-60 Owners Manual - Sweetwater.com
Roland KC-60 Owners Manual - Sweetwater.com
Akai MPC-3000 v3.0 Owners Manual.pdf - Fdiskc
Alesis Micron Owners Manual.pdf - Fdiskc
Akai MPC Catalog - MIDI Mark
Akai MPC2500 Manual - Platinum Audiolab
Setting up the MPK49 and MPD32 with Ableton Live - Akai
Owners Manual.pdf - Decware
EL DIABLO 60 Owners Manual - Genz Benz